FCC ID N6C-SDMAN2
Wireless LAN SDIO module
by Silex Technology, Inc.
Grantee Code: N6C Product Code: SDMAN2
Latest application date: 2021-04-28
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2021-04-28 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2017-02-09 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2017-02-09 |
| 5180-5320 MHz | Class II permissive change or modification of presently authorized equipment | 2016-04-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2016-04-28 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2016-03-24 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2016-03-24 |
| 5180-5320 MHz | Original Equipment | 2015-09-08 |
| 2402-2480 MHz | Original Equipment | 2015-09-08 |
| 2402-2480 MHz | Original Equipment | 2015-09-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| 05 User Manual | Users Manual | 2021-04-28 | PDF 267.7 KB |
| Users manual | Users Manual | 2016-04-28 | PDF 161.7 KB |
| User Manual | Users Manual | 2015-09-08 | PDF 159 KB |
| Internal Photos | Internal Photos | 2017-02-09 | PDF 211.2 KB |
| Internal Photos | Internal Photos | 2016-03-24 | PDF 406.7 KB |
| Internal Photos (Radio) | Internal Photos | 2016-03-24 | PDF 171.2 KB |
| Internal Photo | Internal Photos | 2015-09-08 | PDF 81.3 KB |
| 04 External Photo | External Photos | 2021-04-28 | PDF 1.1 MB |
| External Photos | External Photos | 2017-02-09 | PDF 211.2 KB |
| External photos | External Photos | 2016-04-28 | PDF 221.5 KB |
| Host External Photos | External Photos | 2016-03-24 | PDF 286 KB |
| External Photo | External Photos | 2015-09-08 | PDF 81.3 KB |
| External Photo_Chip Antenna | External Photos | 2015-09-08 | PDF 58.9 KB |
| External Photo_External Antenna | External Photos | 2015-09-08 | PDF 32.5 KB |
| Label and Location | ID Label/Location Info | 2015-09-08 | PDF 424.3 KB |
| 03 FCC SAR Setup Photo | Test Setup Photos | 2021-04-28 | PDF 417.2 KB |
| 03 FCC Test Setup Photo_DTS | Test Setup Photos | 2021-04-28 | PDF 358.8 KB |
| 03 FCC Test Setup Photo_NII | Test Setup Photos | 2021-04-28 | PDF 283.2 KB |
| Test Setup Photos | Test Setup Photos | 2017-02-09 | PDF 244.2 KB |
| Test setup photos | Test Setup Photos | 2016-04-28 | PDF 1.2 MB |
| Test setup photos | Test Setup Photos | 2016-04-28 | PDF 1,020.3 KB |
| Test setup photo | Test Setup Photos | 2016-03-24 | PDF 267.6 KB |
| FCC DFS Setup Photo | Test Setup Photos | 2015-09-08 | PDF 254.3 KB |
| FCC Test Setup Photo_DSS | Test Setup Photos | 2015-09-08 | PDF 1.3 MB |
| FCC Test Setup Photo_DTS | Test Setup Photos | 2015-09-08 | PDF 2.6 MB |
| FCC Test Setup Photo_NII | Test Setup Photos | 2015-09-08 | PDF 1.2 MB |
| 03 FCC Test Report_DTS | Test Report | 2021-04-28 | PDF 1,018 KB |
| 03 FCC Test Report_NII | Test Report | 2021-04-28 | PDF 652.5 KB |
| DTS Test Report | Test Report | 2017-02-09 | PDF 751.9 KB |
| NII Test Report | Test Report | 2017-02-09 | PDF 841.1 KB |
| RF Test Report Metadata only | RF Exposure Info | 2017-02-09 | PDF 89.6 KB |
| Test report | Test Report | 2016-04-28 | PDF 1.1 MB |
| Test report | Test Report | 2016-04-28 | PDF 959.3 KB |
| Test Report | Test Report | 2016-03-24 | PDF 2.9 MB |
| Test Report | Test Report | 2016-03-24 | PDF 5 MB |
| FCC DFS Report | Test Report | 2015-09-08 | PDF 889.3 KB |
| FCC Test Report_DSS | Test Report | 2015-09-08 | PDF 1.4 MB |
| FCC Test Report_DTS | Test Report | 2015-09-08 | PDF 1.2 MB |
| FCC Test Report_NII | Test Report | 2015-09-08 | PDF 1.9 MB |
| 02 FCC Authorization | Cover Letter(s) | 2021-04-28 | PDF 78.9 KB |
| 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 2021-04-28 | PDF 98.6 KB |
| 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 2021-04-28 | PDF 57.1 KB |
| Class II Permissive Change Letter | Cover Letter(s) | 2017-02-09 | PDF 300.5 KB |
| Product Certification Representative Auth Letter | Cover Letter(s) | 2017-02-09 | PDF 353.7 KB |
| Authorization letter | Cover Letter(s) | 2016-04-28 | PDF 313.2 KB |
| C2PC letter | Cover Letter(s) | 2016-04-28 | PDF 414.2 KB |
| Confidentiality letter | Cover Letter(s) | 2016-04-28 | PDF 262.8 KB |
| Professional installation | Cover Letter(s) | 2016-04-28 | PDF 236.7 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2016-03-24 | PDF 303.7 KB |
| Product Certification Rep Auth Letter | Cover Letter(s) | 2016-03-24 | PDF 336.7 KB |
| FCC Authorization Letter | Cover Letter(s) | 2015-09-08 | PDF 866.4 KB |
| FCC Declaration Letter of FCC 14-30_Old rule or New rule | Cover Letter(s) | 2015-09-08 | PDF 762 KB |
| FCC Declaration of Professional Installation | Cover Letter(s) | 2015-09-08 | PDF 703.9 KB |
| FCC MA Letter | Cover Letter(s) | 2015-09-08 | PDF 1.3 MB |
| FCC Request for Confidentiality Letter | Cover Letter(s) | 2015-09-08 | PDF 801.8 KB |
| 03 FCC SAR Report | RF Exposure Info | 2021-04-28 | PDF 5 MB |
| RF Exposure Report | RF Exposure Info | 2017-02-09 | PDF 89.6 KB |
| RF Exposure Test | RF Exposure Info | 2017-02-09 | PDF 89.6 KB |
| RF EX | RF Exposure Info | 2016-04-28 | PDF 59.2 KB |
| MPE Calculation Report | RF Exposure Info | 2016-03-24 | PDF 95.2 KB |
| FCC RF Exposure_DSS | RF Exposure Info | 2015-09-08 | PDF 64.7 KB |
| FCC RF Exposure_DTS | RF Exposure Info | 2015-09-08 | PDF 60.1 KB |
| FCC RF Exposure_NII | RF Exposure Info | 2015-09-08 | PDF 53.2 KB |
| (Confidential) Block Diagram Metadata only | Block Diagram | PDF 314.3 KB | |
| (Confidential) Schematics_Chip Antenna Metadata only | Schematics | PDF 676.5 KB | |
| (Confidential) Schematics_External Antenna Metadata only | Schematics | PDF 665 KB | |
| (Confidential) Theory of Operation-Antenna Specification_Chip Antenna Metadata only | Operational Description | PDF 416 KB | |
| (Confidential) Theory of Operation-Antenna Specification_External Antenna Metadata only | Operational Description | PDF 786.5 KB | |
| (Confidential) Theory of Operation-Antenna list Metadata only | Operational Description | PDF 203.9 KB | |
| (Confidential) Theory of Operation-Hopping Sequence Metadata only | Operational Description | PDF 135.9 KB | |
| (Confidential) Theory of Operation-Interface Specification Metadata only | Operational Description | PDF 2.8 MB | |
| (Confidential) Theory of Operation-Software Security Metadata only | Operational Description | PDF 1.2 MB | |
| 06 Confidential_Theory of Operation-Antenna Specification Metadata only | Operational Description | PDF 425.3 KB | |
| 06 Confidential_Theory of Operation-Host Specification Metadata only | Operational Description | PDF 616.2 KB | |
| 06 Confidential_Theory of Operation-Tune up procedure Metadata only | Operational Description | PDF 90.7 KB | |
| Antenna list Metadata only | Operational Description | PDF 16.7 KB | |
| Antenna spec1 Metadata only | Operational Description | PDF 432 KB | |
| Antenna spec2 Metadata only | Operational Description | PDF 104.6 KB | |
| (Confidential) Parts List Metadata only | Parts List/Tune Up Info | PDF 34.6 KB |
Application Information
| Application ID | jvZ9OOCFxQNxDTRsnU0bfg== |
|---|---|
| Final Action Date | 2021-04-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013616305 |
| Model | SDMAN2 |
| Frequency Range | 5180-5320 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Wireless LAN SDIO module |
| Responsible Party | Yoshinori Nakai, General Manager, nakai@silex.jp  , 81 774-98-3781 |
| Agent | Shuichi Shuichi Shuichi, UL Japan, Inc., Shuichi.Ohyama@ul.com  , 81-596-24-8999 |
| Technical Contact | Satofumi Matsuyama, UL Japan, Inc., Satofumi.Matsuyama@ul.com , 81-596-24-8999 |
| Test Firm | Takayuki Shimada, UL Japan, Inc.(Ise), Takayuki.Shimada@ul.com , 81-596-24-8999 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN 20 MHz bandwidth mode: 2.4 GHz, U-NII-1 and U-NII-3). Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Remote Controller WTP-100, WTP-110 and WTP-120). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR for extremity (hand) and simultaneous transmission exposure conditions are 0.78 W/kg and 0.81 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| jvZ9OOCFxQNxDTRsnU0bfg== | 2021-04-28 | Class II permissive change or modification of presently authorized equipment |
| 48eAl/qSxyEYnn+1lM/AVQ== | 2021-04-28 | Class II permissive change or modification of presently authorized equipment |
| rjg4aUySR3ypiBkP7M0VJw== | 2017-02-09 | Class II permissive change or modification of presently authorized equipment |
| KPo9PNoa7D57hWcQqf+r3Q== | 2017-02-09 | Class II permissive change or modification of presently authorized equipment |
| csOjmvr7+1CrBQuGL/UhxQ== | 2016-04-28 | Class II permissive change or modification of presently authorized equipment |
| WmKKvgaGqqxx9tDEfNun5w== | 2016-04-28 | Class II permissive change or modification of presently authorized equipment |
| e6/itndebWEERm+0FVxSKA== | 2016-03-24 | Class II permissive change or modification of presently authorized equipment |
| 2EiNi5b9FPha4NR9pSN+0A== | 2016-03-24 | Class II permissive change or modification of presently authorized equipment |
| Q8xA6Ofc3uVsnT3i1TalWA== | 2015-09-08 | Original Equipment |
| 8QGIJOTa3qI/nvHT9NXU1A== | 2015-09-08 | Original Equipment |
| 2yAdpze1EhclN6UF3UeyUQ== | 2015-09-08 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0139000 | 15C | CC |
| 2402-2480 MHz | 0.0027 | 15C | CC |
| 2412-2462 MHz | 0.2505 | 15C | CC, MO |
| 2412-2462 MHz | 0.2505000 | 15C | CC, MO |
| 5180-5320 MHz | 0.0299 | 15E | 38, CC, MO, ND |
| 5180-5240 MHz | 0.0299 | 15E | 38, CC, MO |
| 5260-5320 MHz | 0.0299 | 15E | 38, CC, MO, ND |
| 5500-5700 MHz | 0.0333 | 15E | 38, CC, MO, ND |
| 5500-5720 MHz | 0.0333 | 15E | 38, CC, MO, ND |
| 5745-5825 MHz | 0.0254 | 15E | 38, CC, MO |
| 5745-5824 MHz | 0.0254 | 15E | 38, CC, MO |
Grants
TCB Grant - Application WmKKvgaGqqxx9tDEfNun5w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 04/28/2016 Application Dated: 04/28/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Class II Permissive Change to add specific antennas installed professionally described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application WmKKvgaGqqxx9tDEfNun5w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/28/2016 Application Dated: 04/28/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Class II Permissive Change to add specific antennas installed professionally described in the filing. Single Modular Approval. Output power listed is Conducted(Peak). Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/09/2017 Application Dated: 02/09/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| C2PC to add Ethertronics Prestta Antenna. Original Grant Comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application rjg4aUySR3ypiBkP7M0VJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 02/09/2017 Application Dated: 02/09/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| C2PC to add Ethertronics Prestta Antenna. Original Grant Comment: Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Q8xA6Ofc3uVsnT3i1TalWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/09/2017 Application Dated: 02/09/2017 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 |
| C2PC to add Ethertronics Prestta Antenna. Bluetooth is disabled Original Grant Comment: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application KPo9PNoa7D57hWcQqf+r3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 02/09/2017 Application Dated: 02/09/2017 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 |
| C2PC to add Ethertronics Prestta Antenna. Bluetooth is disabled Original Grant Comment: Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/28/2021 Application Dated: 04/28/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN 20 MHz bandwidth mode: 2.4 GHz, U-NII-1 and U-NII-3). Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Remote Controller WTP-100, WTP-110 and WTP-120). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR for extremity (hand) and simultaneous transmission exposure conditions are 0.78 W/kg and 0.81 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jvZ9OOCFxQNxDTRsnU0bfg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/28/2021 Application Dated: 04/28/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN 20 MHz bandwidth mode: 2.4 GHz, U-NII-1 and U-NII-3). Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Remote Controller WTP-100, WTP-110 and WTP-120). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D03 as a Client only without Radar Detection. The highest reported SAR for extremity (hand) and simultaneous transmission exposure conditions are 0.78 W/kg and 0.81 W/kg, respectively. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/24/2016 Application Dated: 03/23/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5824.0 | 0.0254 |
| C2PC to add mobile host unit CRIO-9037 with MMT Corp dipole external antenna. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application e6/itndebWEERm+0FVxSKA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 03/24/2016 Application Dated: 03/23/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5824.0 | 0.0254 |
| C2PC to add mobile host unit CRIO-9037 with MMT Corp dipole external antenna. Single Modular Approval. Output power listed is Conducted. For professional installation only. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 04/28/2016 Application Dated: 04/28/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Class II Permissive Change to add specific antennas installed professionally described in the filing. Single Modular Approval. Output power listed is Conducted. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application csOjmvr7+1CrBQuGL/UhxQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/28/2016 Application Dated: 04/28/2016 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO ND | 15E | 5180.0 - 5320.0 | 0.0299 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.0333 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.0254 |
| Class II Permissive Change to add specific antennas installed professionally described in the filing. Single Modular Approval. Output power listed is Conducted. Device shall not be sold to general public. This device has a 20 MHz and 40 MHz bandwidth mode for 5 GHz bands. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and KDB 905462 D01 as a Client only without Radar Detection. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8QGIJOTa3qI/nvHT9NXU1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/28/2021 Application Dated: 04/28/2021 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN 20 MHz bandwidth mode: 2.4 GHz, U-NII-1 and U-NII-3). Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Remote Controller WTP-100, WTP-110 and WTP-120). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The highest reported SAR for extremity (hand) and simultaneous transmission exposure conditions are 0.78 W/kg and 0.81 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 48eAl/qSxyEYnn+1lM/AVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 04/28/2021 Application Dated: 04/28/2021 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0027 |
| Class II Permissive Change to add specific portable configuration host described in the filing (Limited to the Wireless LAN 20 MHz bandwidth mode: 2.4 GHz, U-NII-1 and U-NII-3). Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Remote Controller WTP-100, WTP-110 and WTP-120). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.
The highest reported SAR for extremity (hand) and simultaneous transmission exposure conditions are 0.78 W/kg and 0.81 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Japan, Inc. 4383-326 Asama-cho Ise-shi Mie, 5160021 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai, Seika-cho, Soraku-gun |
| Kyoto, 619-0237 Japan |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2yAdpze1EhclN6UF3UeyUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai, Seika-cho, Soraku-gun Kyoto, 619-0237 Japan |
Date of Grant: 09/08/2015 Application Dated: 09/08/2015 |
| Attention: Yoshinori Nakai , General Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0139 |
| Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Siemic Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 03/24/2016 Application Dated: 03/23/2016 |
| Silex Technology, Inc. |
| 2-3-1 Hikaridai,Seika-cho Sourakugun |
| Kyoto, 619-0237 Japan |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 |
| C2PC to disable Bluetooth and add to mobile host unit CRIO-9037 with MMT Corp dipole external antenna. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 2EiNi5b9FPha4NR9pSN+0A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Silex Technology, Inc. 2-3-1 Hikaridai,Seika-cho Sourakugun Kyoto, 619-0237 Japan |
Date of Grant: 03/24/2016 Application Dated: 03/23/2016 |
| Attention: Toshiro Kometani , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | N6C-SDMAN2 |
| Name of Grantee: | Silex Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN SDIO module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2505 |
| C2PC to disable Bluetooth and add to mobile host unit CRIO-9037 with MMT Corp dipole external antenna. Single Modular Approval. Output power listed is Conducted(Peak). For professional installation only. Device shall not be sold to general public. Separate evaluation must be required for any portable configuration. When used in mobile applications, the antennas shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. The antenna of this device must not be co-located or used in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. OEM integrators must be provided with antenna installation instructions. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |