FCC ID SQMSQ-3000

VoIP Phone

by UniData Communication Systems Inc.

Grantee Code: SQM   Product Code: SQ3000
Latest application date: 2009-08-31

FCC ID Device Details

FCC IDSQMSQ-3000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSQM
Product CodeSQ3000
Applicant BusinessUniData Communication Systems Inc. 🇰🇷
Related Domains udcsystems.com
Equipment ClassVoIP Phone
Test FirmSGS Korea Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2009-08-31
5180-5240 MHzOriginal Equipment2009-08-31

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2009-08-31PDF 1.9 MB
User manualUsers Manual2009-08-31PDF 1.4 MB
Internal photosInternal Photos2009-08-31PDF 317.2 KB
External photosExternal Photos2009-08-31PDF 178.3 KB
FCC label format and locationID Label/Location Info2009-08-31PDF 70.9 KB
Label format and locationID Label/Location Info2009-08-31PDF 70.9 KB
RF test setup photosTest Setup Photos2009-08-31PDF 88.3 KB
SAR test setup photosTest Setup Photos2009-08-31PDF 370.9 KB
SAR test reportRF Exposure Info2009-08-31PDF 4.4 MB
Test reportTest Report2009-08-31PDF 518.4 KB
Test reportTest Report2009-08-31PDF 912.3 KB
Agent authorizationCover Letter(s)2009-08-31PDF 15.1 KB
Confidentiality requestCover Letter(s)2009-08-31PDF 52.1 KB
Request for confidentialityCover Letter(s)2009-08-31PDF 52.1 KB
Antenna specificationParts List/Tune Up Info2009-08-31PDF 523.9 KB

Application Information

Application IDvXXOTVYi9ehZNINhjOkNjg==
Final Action Date2009-08-31
Application PurposeOriginal Equipment
Applicant FRN0012204178
ModelSQ-3000
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionVoIP Phone
Responsible PartyByeong Gil Park, Manager, bkpark@udcsystems.com , +82-2-3443-3390
Test FirmJulia Choi, SGS Korea Co., Ltd., julia.choi@sgs.com , 82-31-263-0409
TCB Emailmike.kuo@ccsemc.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. This device was tested with a 1.5cm device-to-body spacing gap and was not tested with any body-worn accessories. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Approval is limited to the specific configuration described in this filing. The WLAN antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. The highest reported SAR values are: Head: 0.255 W/kg; Body-worn: 0.225 W/kg.

Applications

Application IDDatePurpose
vXXOTVYi9ehZNINhjOkNjg==2009-08-31Original Equipment
fXklYEcSFQzFgfLytzG3vA==2009-08-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.04815CCC
5180-5240 MHz0.043000015ECC
5745-5825 MHz0.02115CCC

Grants

TCB Grant - Application vXXOTVYi9ehZNINhjOkNjg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/31/2009

Application Dated: 08/31/2009
UniData Communication Systems Inc.
3F, Burim-Bldg, 837-6, Bangbae4-Dong, Seocho-Gu
Seoul, 137-835
South Korea
 
Attention: Byeong Gil Park , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQMSQ-3000
Name of Grantee:  UniData Communication Systems Inc.
Equipment Class: Digital Transmission System
Notes: VoIP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.048  
CC 15C 5745.0  -  5825.0 0.021  

Power listed is conducted. This device was tested with a 1.5cm device-to-body spacing gap and was not tested with any body-worn accessories. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Approval is limited to the specific configuration described in this filing. The WLAN antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. The highest reported SAR values are: Head: 0.255 W/kg; Body-worn: 0.225 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vXXOTVYi9ehZNINhjOkNjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UniData Communication Systems Inc.
3F, Burim-Bldg, 837-6, Bangbae4-Dong, Seocho-Gu
Seoul, 137-835
South Korea
  Date of Grant: 08/31/2009

Application Dated: 08/31/2009
 
Attention: Byeong Gil Park , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQMSQ-3000
Name of Grantee:  UniData Communication Systems Inc.
Equipment Class: Digital Transmission System
Notes: VoIP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.048  
CC 15C 5745.0  -  5825.0 0.021  

Power listed is conducted. This device was tested with a 1.5cm device-to-body spacing gap and was not tested with any body-worn accessories. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Approval is limited to the specific configuration described in this filing. The WLAN antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. The highest reported SAR values are: Head: 0.255 W/kg; Body-worn: 0.225 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application fXklYEcSFQzFgfLytzG3vA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 08/31/2009

Application Dated: 08/31/2009
UniData Communication Systems Inc.
3F, Burim-Bldg, 837-6, Bangbae4-Dong, Seocho-Gu
Seoul, 137-835
South Korea
 
Attention: Byeong Gil Park , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQMSQ-3000
Name of Grantee:  UniData Communication Systems Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: VoIP Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  

Power listed is conducted. This device was tested with a 1.5cm device-to-body spacing gap and was not tested with any body-worn accessories. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Approval is limited to the specific configuration described in this filing. The WLAN antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. The highest reported SAR values are: Head: 0.255 W/kg; Body-worn: 0.225 W/kg.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application fXklYEcSFQzFgfLytzG3vA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

UniData Communication Systems Inc.
3F, Burim-Bldg, 837-6, Bangbae4-Dong, Seocho-Gu
Seoul, 137-835
South Korea
  Date of Grant: 08/31/2009

Application Dated: 08/31/2009
 
Attention: Byeong Gil Park , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SQMSQ-3000
Name of Grantee:  UniData Communication Systems Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: VoIP Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  

Power listed is conducted. This device was tested with a 1.5cm device-to-body spacing gap and was not tested with any body-worn accessories. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. Approval is limited to the specific configuration described in this filing. The WLAN antenna(s) used for this device must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. Additional equipment authorization is required for changes that result in the need for SAR evaluation. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. The highest reported SAR values are: Head: 0.255 W/kg; Body-worn: 0.225 W/kg.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: