FCC ID U4SPD

This application does not exist.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 06/25/2008 Application Dated: 04/09/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	24E	1850.2  -  1909.8	1.762	2.5  PM	314KGXW
20 28 CC	24E	1850.2  -  1909.8	1.535	2.5  PM	320KG7W
20 28 CC	24E	1850.2  -  1909.8	0.793	2.5  PM	316KG7W
20 28 CC	22H	824.2  -  848.8	2.483	2.5  PM	314KGXW
20 28 CC	22H	824.2  -  848.8	2.138	2.5  PM	314KG7W
20 28 CC	22H	824.2  -  848.8	0.601	2.5  PM	312KG7W

Output power is ERP for Part 22 and EIRP for Part 24. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported single- and co-transmit SAR values under this FCCID are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application zqWRF2lZzJNhPaYa2pjW0Q==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Portable Data Terminal

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	24E	1850.2  -  1909.8	1.762	2.5  PM	314KGXW
20 28 CC	24E	1850.2  -  1909.8	1.535	2.5  PM	320KG7W
20 28 CC	24E	1850.2  -  1909.8	0.793	2.5  PM	316KG7W
20 28 CC	22H	824.2  -  848.8	2.483	2.5  PM	314KGXW
20 28 CC	22H	824.2  -  848.8	2.138	2.5  PM	314KG7W
20 28 CC	22H	824.2  -  848.8	0.601	2.5  PM	312KG7W

Output power is ERP for Part 22 and EIRP for Part 24. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	24E	1850.2  -  1909.8	1.762	2.5  PM	314KGXW
20 28 CC	24E	1850.2  -  1909.8	1.535	2.5  PM	320KG7W
20 28 CC	24E	1850.2  -  1909.8	0.793	2.5  PM	316KG7W
20 28 CC	22H	824.2  -  848.8	2.483	2.5  PM	314KGXW
20 28 CC	22H	824.2  -  848.8	2.138	2.5  PM	314KG7W
20 28 CC	22H	824.2  -  848.8	0.601	2.5  PM	312KG7W

Output power is ERP for Part 22 and EIRP for Part 24. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application YgD87GKOdMhyjoXF8XVEpg==

EAS Grant - Application YgD87GKOdMhyjoXF8XVEpg==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 06/23/2008 Application Dated: 04/09/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2402.0  -  2480.0	0.0013

Output power is conducted. The antenna used for this transmitter is installed for use in a final-product with other licensed and unlicensed transceivers under this FCC ID. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application WCIur7P8cQAoc0lxTxirbw==

EAS Grant - Application WCIur7P8cQAoc0lxTxirbw==

Mail To:

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 06/10/2008 Application Dated: 04/09/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Digital Transmission System
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2412.0  -  2462.0	0.051

Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported single- and co-transmit SAR values under this FCCID are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Jk4J/TxZV6dyRzxaT+844g==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Digital Transmission System
Notes:	Portable Data Terminal

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2412.0  -  2462.0	0.051

Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Digital Transmission System
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2412.0  -  2462.0	0.051

Output power is conducted. Collocated transmitter operating configurations have been evaluated as described in this filing; other collocation configurations require separate evaluation. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted the specific belt-clips/ holsters/ accessories tested for this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are: Part 15 Body-worn 0.029 W/kg; Part 22 Body-worn: 0.172 W/kg Part 24 Body-worn: 0.058 W/kg.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application C5hB/pQGCzNq0wMwWLzp/w==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Datalogic ADC, Inc.

959 Terry Street

Eugene, OR 97402

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Portable Data Terminal

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2402.0  -  2480.0	0.0013

Output power is conducted. The antenna used for this transmitter is installed for use in a final-product with other licensed and unlicensed transceivers under this FCC ID. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Datalogic ADC, Inc. 959 Terry Street Eugene, OR 97402 United States

Date of Grant: 02/13/2008 Application Dated: 01/25/2008

Attention: Jerry Kalina , Regulatory Engineer

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	U4SPD
Name of Grantee:	Datalogic ADC, Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Portable Data Terminal
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
20 28 CC	15C	2402.0  -  2480.0	0.0013

Output power is conducted. The antenna used for this transmitter is installed for use in a final-product with other licensed and unlicensed transceivers under this FCC ID. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.
28:	An AC adapter incorporating a ferrite core at the connector end of its DC line must be provided with every unit sold.
CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: