FCC ID V8NAUMGM210P
2.4GHz Wireless Zigbee Module
by Autani, LLC
Grantee Code: V8N Product Code: AUMGM210P
Latest application date: 2022-08-04
FCC ID Device Details
| FCC ID | V8NAUMGM210P |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | V8N |
| Product Code | AUMGM210P |
| Applicant Business | Autani, LLC 🇺🇸 |
| Related Domains |  autani.com |
| Equipment Class | 2.4GHz Wireless Zigbee Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQGM210P Grant Date: 09/26/2019 | 2022-08-04 |
| 2405-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: QOQGM210P Grant Date: 09/26/2019 | 2022-08-04 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2022-08-04 | PDF 52.1 KB |
| Label and Label Location | ID Label/Location Info | 2022-08-04 | PDF 84 KB |
| FCC Agent Authorization | Cover Letter(s) | 2022-08-04 | PDF 39.9 KB |
| FCC Change in ID Authorization Letter | Cover Letter(s) | 2022-08-04 | PDF 703.9 KB |
| FCC Change in ID Request | Cover Letter(s) | 2022-08-04 | PDF 40.8 KB |
Application Information
| Application ID | YPyx9292duIn2Lrcje3Umw== |
|---|---|
| Final Action Date | 2022-08-04 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: QOQGM210P Grant Date: 09/26/2019 |
| Applicant FRN | 0017681503 |
| Model | AUMGM210P |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 2.4GHz Wireless Zigbee Module |
| Responsible Party | Mark Plasterer, Hardware Engineering Manager, mark.plasterer@autani.com , 443-320-2233 |
| Technical Contact | Mark Plasterer, Autani, LLC, mark.plasterer@autani.com , 443-320-2233 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-3-2600884 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| YPyx9292duIn2Lrcje3Umw== | 2022-08-04 | Change in identification of presently authorized equipment. Original FCC ID: QOQGM210P Grant Date: 09/26/2019 |
| NAYowVaHR9SD5HGLCuGwXg== | 2022-08-04 | Change in identification of presently authorized equipment. Original FCC ID: QOQGM210P Grant Date: 09/26/2019 |
Equipment Authorization
Grants
TCB Grant - Application YPyx9292duIn2Lrcje3Umw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/04/2022 Application Dated: 08/04/2022 |
| Autani, LLC |
| 7090 Columbia Gateway Drive |
| Suite 140 |
| Columbia, MD 21046 |
| Attention: Mark Plasterer , Hardware Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V8NAUMGM210P |
| Name of Grantee: | Autani, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Wireless Zigbee Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.099 |
| Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YPyx9292duIn2Lrcje3Umw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Autani, LLC 7090 Columbia Gateway Drive Suite 140 Columbia, MD 21046 United States |
Date of Grant: 08/04/2022 Application Dated: 08/04/2022 |
| Attention: Mark Plasterer , Hardware Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V8NAUMGM210P |
| Name of Grantee: | Autani, LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 2.4GHz Wireless Zigbee Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.099 |
| Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 08/04/2022 Application Dated: 08/04/2022 |
| Autani, LLC |
| 7090 Columbia Gateway Drive |
| Suite 140 |
| Columbia, MD 21046 |
| Attention: Mark Plasterer , Hardware Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V8NAUMGM210P |
| Name of Grantee: | Autani, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz Wireless Zigbee Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.104 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.099 |
| Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NAYowVaHR9SD5HGLCuGwXg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Autani, LLC 7090 Columbia Gateway Drive Suite 140 Columbia, MD 21046 United States |
Date of Grant: 08/04/2022 Application Dated: 08/04/2022 |
| Attention: Mark Plasterer , Hardware Engineering Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | V8NAUMGM210P |
| Name of Grantee: | Autani, LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | 2.4GHz Wireless Zigbee Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2480.0 | 0.104 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.099 |
| Single modular approval for mobile RF exposure conditions. Co-transmission of this module with other transmitters requires a separate evaluation according to FCC multi-transmitter procedures. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. For SAR exemption condition(s) please refer to portable exemption calculation exhibit in this filing and KDB 447498 D01 for detail. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. Approval is limited to OEM installation only. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |