FCC ID WS7-HS28V10

802.11G Broadband Router with SpeedBooster/Switch

by OMNI-WiFi, LLC

Grantee Code: WS7   Product Code: HS28V10
Latest application date: 2008-11-18

FCC ID Device Details

FCC IDWS7-HS28V10
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeWS7
Product CodeHS28V10
Applicant BusinessOMNI-WiFi, LLC 🇺🇸
Related Domains omni-wifi.com
Equipment Class802.11G Broadband Router with SpeedBooster/Switch
Test FirmRhein Tech Laboratories, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2008-11-18
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: Q87-WT54GV40 Grant Date: 05/31/20052008-10-30

Exhibits

DocumentTypeAvailableFile
Internal PhotosInternal Photos2008-11-18PDF 187.3 KB
External PhotosExternal Photos2008-11-18PDF 290.5 KB
Original External PhotosExternal Photos2008-11-18PDF 98.3 KB
External PhotosExternal Photos2008-10-30PDF 98.2 KB
Label and LocationID Label/Location Info2008-10-30PDF 74 KB
Test Setup PhotosTest Setup Photos2008-11-18PDF 128.5 KB
Test ReportTest Report2008-11-18PDF 605.3 KB
Attestation StatementAttestation Statements2008-11-18PDF 148 KB
AgencyCover Letter(s)2008-11-18PDF 121.8 KB
Permissive Change LetterCover Letter(s)2008-11-18PDF 146.5 KB
Change of ID LetterCover Letter(s)2008-10-30PDF 34.3 KB

Application Information

Application IDpg5Sk3JKibcs7P34pQndXA==
Final Action Date2008-11-18
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0018189407
Model-HS28V10
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11G Broadband Router with SpeedBooster/Switch
Responsible PartyPhilip E Hahn, Technical Officer, engr@omni-wifi.com , 207-266-9374
Technical ContactRick McMurray, Rhein Tech Labs, atcbinfo@rheintech.com , 703-689-0368
Test FirmRick McMurray, Rhein Tech Laboratories, Inc., FCCINFO@rheintech.com , 7036890368
TCB EmailHotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to operate on channels 3-8 for 802.11b and channel 6 only for 802.11g. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
pg5Sk3JKibcs7P34pQndXA==2008-11-18Class II permissive change or modification of presently authorized equipment
rv30s7VFIgQHv6KLaRhTFA==2008-10-30Change in identification of presently authorized equipment. Original FCC ID: Q87-WT54GV40 Grant Date: 05/31/2005

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.083000015C

Grants

TCB Grant - Application rv30s7VFIgQHv6KLaRhTFA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/30/2008

Application Dated: 10/30/2008
OMNI-WiFi, LLC
107 Pine Hill Road
Berwick, ME 03901
 
Attention: Philip Hahn , Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WS7-HS28V10
Name of Grantee:  OMNI-WiFi, LLC
Equipment Class: Digital Transmission System
Notes: 802.11G Broadband Router with SpeedBooster/Switch
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.083  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application rv30s7VFIgQHv6KLaRhTFA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

OMNI-WiFi, LLC
107 Pine Hill Road P.O. Box ,
Berwick, ME 03901
United States
  Date of Grant: 10/30/2008

Application Dated: 10/30/2008
 
Attention: Philip Hahn , Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WS7-HS28V10
Name of Grantee:  OMNI-WiFi, LLC
Equipment Class: Digital Transmission System
Notes: 802.11G Broadband Router with SpeedBooster/Switch
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.083  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application pg5Sk3JKibcs7P34pQndXA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 11/18/2008

Application Dated: 11/18/2008
OMNI-WiFi, LLC
107 Pine Hill Road
Berwick, ME 03901
 
Attention: Philip Hahn , Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WS7-HS28V10
Name of Grantee:  OMNI-WiFi, LLC
Equipment Class: Digital Transmission System
Notes: 802.11G Broadband Router with SpeedBooster/Switch
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.083  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to operate on channels 3-8 for 802.11b and channel 6 only for 802.11g. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application pg5Sk3JKibcs7P34pQndXA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

OMNI-WiFi, LLC
107 Pine Hill Road P.O. Box ,
Berwick, ME 03901
United States
  Date of Grant: 11/18/2008

Application Dated: 11/18/2008
 
Attention: Philip Hahn , Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  WS7-HS28V10
Name of Grantee:  OMNI-WiFi, LLC
Equipment Class: Digital Transmission System
Notes: 802.11G Broadband Router with SpeedBooster/Switch
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.083  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. This transmitter is restricted to operate on channels 3-8 for 802.11b and channel 6 only for 802.11g. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: