FCC ID 2A33I-AIOTOGO

LTE Module

by AIOTO Tech Inc.

Grantee Code: 2A33I   Product Code: AIOTOGO
Latest application date: 2022-04-13

FCC ID Device Details

FCC ID2A33I-AIOTOGO
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2A33I
Product CodeAIOTOGO
Applicant BusinessAIOTO Tech Inc. 🇹🇼
Related Domains aiototech.com
Equipment ClassLTE Module
Test FirmBAY AREA COMPLIANCE LABORATORIES CORP.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
704 MHzClass II permissive change or modification of presently authorized equipment2022-04-13
2580-2610 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201903EG25G Grant Date: 03/29/20192022-01-26

Exhibits

DocumentTypeAvailableFile
Host User ManualUsers Manual2022-04-13PDF 1.9 MB
Host Internal PhotosInternal Photos2022-04-13PDF 3.6 MB
Host External PhotosExternal Photos2022-04-13PDF 385.5 KB
Ext PhotosExternal Photos2022-01-26PDF 182.1 KB
Host Label LocationID Label/Location Info2022-04-13PDF 56.3 KB
FCC ID LabelID Label/Location Info2022-01-26PDF 52.7 KB
Test Setup PhotosTest Setup Photos2022-04-13PDF 3.3 MB
Test ReportTest Report2022-04-13PDF 518.2 KB
Attestation letterAttestation Statements2022-04-13PDF 515.8 KB
C2PC Declaration LetterCover Letter(s)2022-04-13PDF 809.8 KB
FCC Long Term Confidential Authorization FormCover Letter(s)2022-04-13PDF 252.2 KB
POACover Letter(s)2022-04-13PDF 212.2 KB
Authorization Letter from Original GranteeCover Letter(s)2022-01-26PDF 362.5 KB
Change ID Application LetterCover Letter(s)2022-01-26PDF 246.7 KB
RF ExposureRF Exposure Info2022-04-13PDF 44.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 192.4 KB
Schematics Metadata onlySchematicsPDF 882.3 KB
Circuit Description Metadata onlyOperational DescriptionPDF 20.9 KB
Tune-up Procedure Metadata onlyParts List/Tune Up InfoPDF 584.7 KB

Application Information

Application IDArmMd0dEMSaMuLgsq6xLJQ==
Final Action Date2022-04-13
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0031763717
ModelAIOTOGO
Frequency Range704 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE Module
Responsible PartyYu-Chen Teng, support@aiototech.com , +886-2-77091089
Test FirmGimmy Tsai, BAY AREA COMPLIANCE LABORATORIES CORP., gimmy.tsai@baclcorp.com , +886-2-2647-6898
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module is integrated into a 4G-LTE Mobile Security Camera (Model: AIOTO Go) documented in this filing. Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5/12. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC of disable GSM/GPRS/UMTS and LTE B7/B13/B25/B38/B41 by software described in this filing. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.

Applications

Application IDDatePurpose
ArmMd0dEMSaMuLgsq6xLJQ==2022-04-13Class II permissive change or modification of presently authorized equipment
hssqlCY9oME5xSMBWOEX9A==2022-01-26Change in identification of presently authorized equipment. Original FCC ID: XMR201903EG25G Grant Date: 03/29/2019

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699.7-715.3 MHz0.24720.1ppm1M09W7D27
704-711 MHz0.34750.1ppm8M93G7D27
704-711 MHz0.21830.1ppm8M93W7D27
704-711 MHz0.0740.1ppm8M93G7D27
704 MHz0.0590.1ppm8M93W7D27
779.5-784.5 MHz0.43950.1ppm4M48G7D27
779.5-784.5 MHz0.3090.1ppm4M49W7D27
782 MHz0.42170.1ppm8M91G7D27
782 MHz0.29110.1ppm8M91W7D27
814.7-823.3 MHz0.24550.1ppm1M09G7D9
814.7-823.3 MHz0.19720.1ppm1M09W7D9
819 MHz0.21980.1ppm8M91G7D9
819 MHz0.17380.1ppm8M91W7D9
824.7-848.3 MHz0.19360.1ppm1M09W7D22H
825.5-847.5 MHz0.2350.1ppm2M70G7D22H
826.4-846.6 MHz0.25120.1ppm4M13F9W22H
826.5-846.5 MHz0.19450.1ppm4M49W7D22H
829-844 MHz0.23330.1ppm8M93G7D22H
829-844 MHz0.17030.1ppm8M93W7D22H
829-844 MHz0.0950.1ppm8M93G7D22H
829-844 MHz0.0760.1ppm8M93W7D22H
831.5-841.5 MHz0.25820.1ppm13M5G7D22H
831.5-841.5 MHz0.18280.1ppm13M4W7D22H
1710.7-1754.3 MHz0.28770.1ppm1M09W7D27
1712.4-1752.6 MHz0.38190.1ppm4M14F9W27
1720-1745 MHz0.48870.1ppm17M9G7D27
1720-1745 MHz0.26120.1ppm17M9W7D27
1720-1745 MHz0.3560.1ppm17M9G7D27
1720-1745 MHz0.2820.1ppm17M9W7D27
1850.7-1909.3 MHz0.25470.1ppm1M09W7D24E
1850.7-1909.3 MHz0.24290.1ppm1M09W7D24E
1852.4-1907.6 MHz0.35240.1ppm4M15F9W24E
1855-1910 MHz0.41110.1ppm8M91G7D24E
1860-1900 MHz0.2470.1ppm17M9G7D24E
1860-1900 MHz0.1970.1ppm17M9W7D24E
1860-1905 MHz0.35160.1ppm17M9G7D24E
1860-1905 MHz0.24890.1ppm17M9W7D24E
1860-1900 MHz0.41980.1ppm17M9G7D24E
1860-1900 MHz0.22590.1ppm17M9W7D24E
2498.5-2687.5 MHz0.34510.1ppm4M50W7D27
2501-2685 MHz0.48530.1ppm8M91G7D27
2502.5-2567.5 MHz0.31920.1ppm4M49W7D27
2506-2680 MHz0.48420.1ppm17M9G7D27
2506-2680 MHz0.3420.1ppm17M9W7D27
2510-2560 MHz0.48640.1ppm17M9G7D27
2510-2560 MHz0.31770.1ppm17M9W7D27
2575-2615 MHz0.39360.1ppm8M91G7D27
2580-2610 MHz0.39260.1ppm17M8G7D27
2580-2610 MHz0.27990.1ppm17M8W7D27

Grants

TCB Grant - Application hssqlCY9oME5xSMBWOEX9A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/26/2022

Application Dated: 01/26/2022
AIOTO Tech Inc.
No. 1, Yumen Street, Zhongshan District
Taipei City, 10452
Taiwan
 
Attention: Yu-Chen Teng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A33I-AIOTOGO
Name of Grantee:  AIOTO Tech Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.8493 0.1  PM 247KGXW
22H 824.2  -  848.8 0.4797 0.1  PM 245KG7W
24E 1850.2  -  1909.8 1.3335 0.1  PM 249KGXW
24E 1850.2  -  1909.8 0.6012 0.1  PM 249KG7W
24E 1852.4  -  1907.6 0.3524 0.1  PM 4M15F9W
27 1712.4  -  1752.6 0.3819 0.1  PM 4M14F9W
22H 826.4  -  846.6 0.2512 0.1  PM 4M13F9W
24E 1860.0  -  1900.0 0.4198 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.2259 0.1  PM 17M9W7D
24E 1850.7  -  1909.3 0.2547 0.1  PM 1M09W7D
27 1720.0  -  1745.0 0.4887 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.2612 0.1  PM 17M9W7D
27 1710.7  -  1754.3 0.2877 0.1  PM 1M09W7D
22H 829.0  -  844.0 0.2333 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.1703 0.1  PM 8M93W7D
22H 825.5  -  847.5 0.235 0.1  PM 2M70G7D
22H 824.7  -  848.3 0.1936 0.1  PM 1M09W7D
27 2510.0  -  2560.0 0.4864 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.3177 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.3192 0.1  PM 4M49W7D
27 704.0  -  711.0 0.3475 0.1  PM 8M93G7D
27 704.0  -  711.0 0.2183 0.1  PM 8M93W7D
27 699.7  -  715.3 0.2472 0.1  PM 1M09W7D
27 782.0  -  782.0 0.4217 0.1  PM 8M91G7D
27 782.0  -  782.0 0.2911 0.1  PM 8M91W7D
27 779.5  -  784.5 0.4395 0.1  PM 4M48G7D
27 779.5  -  784.5 0.309 0.1  PM 4M49W7D
24E 1860.0  -  1905.0 0.3516 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.2489 0.1  PM 17M9W7D
24E 1855.0  -  1910.0 0.4111 0.1  PM 8M91G7D
24E 1850.7  -  1909.3 0.2429 0.1  PM 1M09W7D
90 819.0  -  819.0 0.2198 0.1  PM 8M91G7D
90 819.0  -  819.0 0.1738 0.1  PM 8M91W7D
90 814.7  -  823.3 0.2455 0.1  PM 1M09G7D
90 814.7  -  823.3 0.1972 0.1  PM 1M09W7D
22H 831.5  -  841.5 0.2582 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.1828 0.1  PM 13M4W7D
22H 826.5  -  846.5 0.1945 0.1  PM 4M49W7D
27 2580.0  -  2610.0 0.3926 0.1  PM 17M8G7D
27 2580.0  -  2610.0 0.2799 0.1  PM 17M8W7D
27 2575.0  -  2615.0 0.3936 0.1  PM 8M91G7D
27 2506.0  -  2680.0 0.4842 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.342 0.1  PM 17M9W7D
27 2501.0  -  2685.0 0.4853 0.1  PM 8M91G7D
27 2498.5  -  2687.5 0.3451 0.1  PM 4M50W7D

Single Modular Approval. Power listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 25; and LTE of 1.4 , 3, 5 and 10 MHz bandwidth modes for LTE Band 5,12 and 26 (814-824 MHz), LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7, 38 and 41; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13; LTE of 1.4, 3, 5,10 and 15 MHz bandwidth mode for LTE Band 26(824-849 MHz).

The allowed maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: 8 dBi in WCDMA Band 2/LTE Band 2/7/25/38/41; 5 dBi in WCDMA /LTE Band 4, and 8.6 dBi in GSM850;10.19 dBi in PCS1900; 9.42 dBi in WCDMA Band 5; 9.41 dBi in LTE Band 5; 8.7 dBi in LTE Band 12; 9.16 dBi in LTE Band 13; 9.36 dBi in LTE Band 26 (814-824 MHz); 9.41 dBi in LTE Band 26 (824-849 MHz).

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.


EAS Grant - Application hssqlCY9oME5xSMBWOEX9A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AIOTO Tech Inc.
No. 1, Yumen Street, Zhongshan District
Taipei City, 10452
Taiwan
  Date of Grant: 01/26/2022

Application Dated: 01/26/2022
 
Attention: Yu-Chen Teng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A33I-AIOTOGO
Name of Grantee:  AIOTO Tech Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.8493 0.1  PM 247KGXW
22H 824.2  -  848.8 0.4797 0.1  PM 245KG7W
24E 1850.2  -  1909.8 1.3335 0.1  PM 249KGXW
24E 1850.2  -  1909.8 0.6012 0.1  PM 249KG7W
24E 1852.4  -  1907.6 0.3524 0.1  PM 4M15F9W
27 1712.4  -  1752.6 0.3819 0.1  PM 4M14F9W
22H 826.4  -  846.6 0.2512 0.1  PM 4M13F9W
24E 1860.0  -  1900.0 0.4198 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.2259 0.1  PM 17M9W7D
24E 1850.7  -  1909.3 0.2547 0.1  PM 1M09W7D
27 1720.0  -  1745.0 0.4887 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.2612 0.1  PM 17M9W7D
27 1710.7  -  1754.3 0.2877 0.1  PM 1M09W7D
22H 829.0  -  844.0 0.2333 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.1703 0.1  PM 8M93W7D
22H 825.5  -  847.5 0.235 0.1  PM 2M70G7D
22H 824.7  -  848.3 0.1936 0.1  PM 1M09W7D
27 2510.0  -  2560.0 0.4864 0.1  PM 17M9G7D
27 2510.0  -  2560.0 0.3177 0.1  PM 17M9W7D
27 2502.5  -  2567.5 0.3192 0.1  PM 4M49W7D
27 704.0  -  711.0 0.3475 0.1  PM 8M93G7D
27 704.0  -  711.0 0.2183 0.1  PM 8M93W7D
27 699.7  -  715.3 0.2472 0.1  PM 1M09W7D
27 782.0  -  782.0 0.4217 0.1  PM 8M91G7D
27 782.0  -  782.0 0.2911 0.1  PM 8M91W7D
27 779.5  -  784.5 0.4395 0.1  PM 4M48G7D
27 779.5  -  784.5 0.309 0.1  PM 4M49W7D
24E 1860.0  -  1905.0 0.3516 0.1  PM 17M9G7D
24E 1860.0  -  1905.0 0.2489 0.1  PM 17M9W7D
24E 1855.0  -  1910.0 0.4111 0.1  PM 8M91G7D
24E 1850.7  -  1909.3 0.2429 0.1  PM 1M09W7D
90 819.0  -  819.0 0.2198 0.1  PM 8M91G7D
90 819.0  -  819.0 0.1738 0.1  PM 8M91W7D
90 814.7  -  823.3 0.2455 0.1  PM 1M09G7D
90 814.7  -  823.3 0.1972 0.1  PM 1M09W7D
22H 831.5  -  841.5 0.2582 0.1  PM 13M5G7D
22H 831.5  -  841.5 0.1828 0.1  PM 13M4W7D
22H 826.5  -  846.5 0.1945 0.1  PM 4M49W7D
27 2580.0  -  2610.0 0.3926 0.1  PM 17M8G7D
27 2580.0  -  2610.0 0.2799 0.1  PM 17M8W7D
27 2575.0  -  2615.0 0.3936 0.1  PM 8M91G7D
27 2506.0  -  2680.0 0.4842 0.1  PM 17M9G7D
27 2506.0  -  2680.0 0.342 0.1  PM 17M9W7D
27 2501.0  -  2685.0 0.4853 0.1  PM 8M91G7D
27 2498.5  -  2687.5 0.3451 0.1  PM 4M50W7D

Single Modular Approval. Power listed is ERP for Part 22 and Part 27 below 1 GHz, EIRP for Part 24 and Part 27 above 1 GHz. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain, and cable loss must satisfy MPE categorical Exclusion Requirements of Part 2.1091. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for LTE Band 2, 4 and 25; and LTE of 1.4 , 3, 5 and 10 MHz bandwidth modes for LTE Band 5,12 and 26 (814-824 MHz), LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7, 38 and 41; LTE of 5 and 10 MHz bandwidth modes for LTE Band 13; LTE of 1.4, 3, 5,10 and 15 MHz bandwidth mode for LTE Band 26(824-849 MHz).

The allowed maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed: 8 dBi in WCDMA Band 2/LTE Band 2/7/25/38/41; 5 dBi in WCDMA /LTE Band 4, and 8.6 dBi in GSM850;10.19 dBi in PCS1900; 9.42 dBi in WCDMA Band 5; 9.41 dBi in LTE Band 5; 8.7 dBi in LTE Band 12; 9.16 dBi in LTE Band 13; 9.36 dBi in LTE Band 26 (814-824 MHz); 9.41 dBi in LTE Band 26 (824-849 MHz).

This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.



TCB Grant - Application ArmMd0dEMSaMuLgsq6xLJQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/13/2022

Application Dated: 04/13/2022
AIOTO Tech Inc.
No. 1, Yumen Street, Zhongshan District
Taipei City, 10452
Taiwan
 
Attention: Yu-Chen Teng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A33I-AIOTOGO
Name of Grantee:  AIOTO Tech Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.247 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.197 0.1  PM 17M9W7D
27 1720.0  -  1745.0 0.356 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.282 0.1  PM 17M9W7D
22H 829.0  -  844.0 0.095 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.076 0.1  PM 8M93W7D
27 704.0  -  711.0 0.074 0.1  PM 8M93G7D
27 704.0  -  704.0 0.059 0.1  PM 8M93W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module is integrated into a 4G-LTE Mobile Security Camera (Model: AIOTO Go) documented in this filing. Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5/12. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC of disable GSM/GPRS/UMTS and LTE B7/B13/B25/B38/B41 by software described in this filing.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application ArmMd0dEMSaMuLgsq6xLJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

AIOTO Tech Inc.
No. 1, Yumen Street, Zhongshan District
Taipei City, 10452
Taiwan
  Date of Grant: 04/13/2022

Application Dated: 04/13/2022
 
Attention: Yu-Chen Teng

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2A33I-AIOTOGO
Name of Grantee:  AIOTO Tech Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.247 0.1  PM 17M9G7D
24E 1860.0  -  1900.0 0.197 0.1  PM 17M9W7D
27 1720.0  -  1745.0 0.356 0.1  PM 17M9G7D
27 1720.0  -  1745.0 0.282 0.1  PM 17M9W7D
22H 829.0  -  844.0 0.095 0.1  PM 8M93G7D
22H 829.0  -  844.0 0.076 0.1  PM 8M93W7D
27 704.0  -  711.0 0.074 0.1  PM 8M93G7D
27 704.0  -  704.0 0.059 0.1  PM 8M93W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The module is integrated into a 4G-LTE Mobile Security Camera (Model: AIOTO Go) documented in this filing. Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4, 1.4/3/5/10 MHz BW modes in Band 5/12. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC of disable GSM/GPRS/UMTS and LTE B7/B13/B25/B38/B41 by software described in this filing.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



Mail To: