FCC ID 2AA93-ELS61-US

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 02/25/2019 Application Dated: 02/22/2019

Eroad, Ltd.

Level 3, 260 Oteha Valley Road

AlbanyP.O. Box 305 394,

Auckland, 0757 New Zealand

Attention: Jarred Clayton

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AA93-ELS61-US
Name of Grantee:	Eroad, Ltd.
Equipment Class:	PCS Licensed Transmitter
Notes:	LTE/WCDMA Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	826.4  -  846.6	0.22	9.99  Hz	4M07F9W
BC	27	1712.4  -  1752.6	0.2	11.71  Hz	4M08F9W
BC	24E	1850.4  -  1907.6	0.19	13.25  Hz	4M09F9W
BC	27	699.7  -  715.3	0.16	14.9  Hz	9M11G7D
BC	27	699.7  -  715.3	0.13	14.84  Hz	9M12W7D
BC	22H	824.7  -  848.3	0.17	14.67  Hz	9M11G7D
BC	22H	824.7  -  848.3	0.15	14.43  Hz	9M10W7D
BC	27	1710.7  -  1754.3	0.15	14.86  Hz	18M0G7D
BC	27	1710.7  -  1754.3	0.13	14.8  Hz	18M0W7D
BC	24E	1850.7  -  1909.3	0.15	14.94  Hz	18M0G7D
BC	24E	1850.7  -  1909.3	0.13	14.59  Hz	18M0W7D

Limited Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22 is 23.93 dBm and for part 27 is 23.27 dBm, EIRP for part 24 is 23.68 dBm and for part 27 is 23.63 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the ELS61-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 700 MHz/850 MHz/1700MHz/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the erp 3W Part 27, the 2W eirp Part 24 and the 1W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. CLASS II PERMISSIVE CHANGE: Limited to “EROAD electronic distance recorder, Model: Ehubo2.2”.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand

Date of Grant: 02/25/2019 Application Dated: 02/22/2019

Attention: Jarred Clayton

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AA93-ELS61-US
Name of Grantee:	Eroad, Ltd.
Equipment Class:	PCS Licensed Transmitter
Notes:	LTE/WCDMA Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	826.4  -  846.6	0.22	9.99  Hz	4M07F9W
BC	27	1712.4  -  1752.6	0.2	11.71  Hz	4M08F9W
BC	24E	1850.4  -  1907.6	0.19	13.25  Hz	4M09F9W
BC	27	699.7  -  715.3	0.16	14.9  Hz	9M11G7D
BC	27	699.7  -  715.3	0.13	14.84  Hz	9M12W7D
BC	22H	824.7  -  848.3	0.17	14.67  Hz	9M11G7D
BC	22H	824.7  -  848.3	0.15	14.43  Hz	9M10W7D
BC	27	1710.7  -  1754.3	0.15	14.86  Hz	18M0G7D
BC	27	1710.7  -  1754.3	0.13	14.8  Hz	18M0W7D
BC	24E	1850.7  -  1909.3	0.15	14.94  Hz	18M0G7D
BC	24E	1850.7  -  1909.3	0.13	14.59  Hz	18M0W7D

Limited Single Modular Approval. Power out is conducted at the antenna terminal. ERP for part 22 is 23.93 dBm and for part 27 is 23.27 dBm, EIRP for part 24 is 23.68 dBm and for part 27 is 23.63 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the ELS61-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 700 MHz/850 MHz/1700MHz/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the erp 3W Part 27, the 2W eirp Part 24 and the 1W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee. CLASS II PERMISSIVE CHANGE: Limited to “EROAD electronic distance recorder, Model: Ehubo2.2”.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

TCB Grant - Application bBFQnvH6vXED9z7+uTf5Zw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669

Date of Grant: 02/19/2019 Application Dated: 02/18/2019

Eroad, Ltd.

Level 3, 260 Oteha Valley Road

AlbanyP.O. Box 305 394,

Auckland, 0757 New Zealand

Attention: Jarred Clayton

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AA93-ELS61-US
Name of Grantee:	Eroad, Ltd.
Equipment Class:	PCS Licensed Transmitter
Notes:	LTE/WCDMA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	826.4  -  846.6	0.22	9.99  Hz	4M07F9W
BC	27	1712.4  -  1752.6	0.2	11.71  Hz	4M08F9W
BC	24E	1850.4  -  1907.6	0.19	13.25  Hz	4M09F9W
BC	27	699.7  -  715.3	0.16	14.9  Hz	9M11G7D
BC	27	699.7  -  715.3	0.13	14.84  Hz	9M12W7D
BC	22H	824.7  -  848.3	0.17	14.67  Hz	9M11G7D
BC	22H	824.7  -  848.3	0.15	14.43  Hz	9M10W7D
BC	27	1710.7  -  1754.3	0.15	14.86  Hz	18M0G7D
BC	27	1710.7  -  1754.3	0.13	14.8  Hz	18M0W7D
BC	24E	1850.7  -  1909.3	0.15	14.94  Hz	18M0G7D
BC	24E	1850.7  -  1909.3	0.13	14.59  Hz	18M0W7D

Power out is conducted at the antenna terminal. ERP for part 22 is 23.93 dBm and for part 27 is 23.27 dBm, EIRP for part 24 is 23.68 dBm and for part 27 is 23.63 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the ELS61-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 700 MHz/850 MHz/1700MHz/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the erp 3W Part 27, the 2W eirp Part 24 and the 1W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Eroad, Ltd. Level 3, 260 Oteha Valley Road AlbanyP.O. Box 305 394, Auckland, 0757 New Zealand

Date of Grant: 02/19/2019 Application Dated: 02/18/2019

Attention: Jarred Clayton

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AA93-ELS61-US
Name of Grantee:	Eroad, Ltd.
Equipment Class:	PCS Licensed Transmitter
Notes:	LTE/WCDMA Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
BC	22H	826.4  -  846.6	0.22	9.99  Hz	4M07F9W
BC	27	1712.4  -  1752.6	0.2	11.71  Hz	4M08F9W
BC	24E	1850.4  -  1907.6	0.19	13.25  Hz	4M09F9W
BC	27	699.7  -  715.3	0.16	14.9  Hz	9M11G7D
BC	27	699.7  -  715.3	0.13	14.84  Hz	9M12W7D
BC	22H	824.7  -  848.3	0.17	14.67  Hz	9M11G7D
BC	22H	824.7  -  848.3	0.15	14.43  Hz	9M10W7D
BC	27	1710.7  -  1754.3	0.15	14.86  Hz	18M0G7D
BC	27	1710.7  -  1754.3	0.13	14.8  Hz	18M0W7D
BC	24E	1850.7  -  1909.3	0.15	14.94  Hz	18M0G7D
BC	24E	1850.7  -  1909.3	0.13	14.59  Hz	18M0W7D

Power out is conducted at the antenna terminal. ERP for part 22 is 23.93 dBm and for part 27 is 23.27 dBm, EIRP for part 24 is 23.68 dBm and for part 27 is 23.63 dBm. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install the ELS61-US module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 2.15 dBi at 700 MHz/850 MHz/1700MHz/1900 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no condition may an antenna gain be used that would exceed the 7W erp Part 22, the erp 3W Part 27, the 2W eirp Part 24 and the 1W eirp Part 27 power limits. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.

BC:	The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To: