172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY

ZHENCHENG TOYS FACTORY R/C CAR

Page 1 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 2 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 3 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 4 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 5 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 6 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 7 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Page 8 of 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
+86 (0) 755 2601 2053
Fax:
+86 (0) 755 2671 0594
Email:
ee.shenzhen@sgs.com
Report No.: SZEM170900945103
Page:
1 of 8
Cover page
RF Exposure Evaluation Report
Application No.:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
SZEM1709009451CR
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
Equipment Under Test (EUT):
EUT Name:
R/C CAR
Model No.:
Please refer to section 2 ♣
♣
Please refer to section 2 of this report which indicates which model was actually
tested and which were electrically identical.
FCC ID:
2AAGP172801B
Trade mark:
CARZON
47 CFR Part 1.1307
Standard(s) :
Date of Receipt:
47 CFR Part 1.1310
2017-09-05
Date of Test:
2017-09-05 to 2017-09-14
Date of Issue:
2017-09-14
Test Result:
Pass*
In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS
International Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
2 of 8
2 Version
Revision Record
Version
Chapter
01
Date
2017-09-14
Modifier
Remark
Original
Authorized for issue by:
Leo Li /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
3 of 8
Contents
Page
COVER PAGE .............................................................................................................................................................1
VERSION .....................................................................................................................................................................2
CONTENTS .................................................................................................................................................................3
GENERAL INFORMATION .......................................................................................................................................4
4.1
4.2
4.3
4.4
4.5
4.6
GENERAL DESCRIPTION OF EUT ................................................................................................................................4
TEST LOCATION .........................................................................................................................................................5
TEST FACILITY ...........................................................................................................................................................5
DEVIATION FROM STANDARDS...................................................................................................................................6
ABNORMALITIES FROM STANDARD CONDITIONS .......................................................................................................6
OTHER INFORMATION REQUESTED BY THE CUSTOMER .............................................................................................6
RF EXPOSURE EVALUATION ................................................................................................................................7
5.1 RF EXPOSURE COMPLIANCE REQUIREMENT ..............................................................................................................7
5.1.1 Limits ..............................................................................................................................................................7
5.1.2 Test Procedure ..............................................................................................................................................7
4.1.3 EUT RF EXPOSURE EVALUATION..............................................................................................................................8
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
4 of 8
General Information
4.1 General Description of EUT
Test voltage
Nickel-chromium Battery: 3.7V 380mAh rechargeable battery which
charged by USB port for car
DC 3.7V
Cable:
USB cable: 60cm unshielded
Type of Modulation:
Operating Frequency:
IEEE for 802.11b: DSSS (CCK, DQPSK, DBPSK)
IEEE for 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
IEEE for 802.11nHT20: OFDM (64QAM, 16QAM, QPSK, BPSK)
IEEE 802.11b/g/n(HT20): 2412MHz to 2462MHz
Channel Number:
IEEE 802.11b/g, IEEE 802.11n(HT20): 11 Channels
Channels Step:
Channels with 5MHz step
Antenna Type:
Integral
Antenna Gain:
2.5 dBi
EIRP:
13.21dBm(20.94mW)*
The EIRP data refer to the report SZEM170900945101.
Power supply:
Remark:
Model No.: 172801,172802,333-P011A,333-P012A,333-P013A,333-P014A,333-P015A,333-SL01B,333SL01A,171801B,171802B,171801A,171802A,171803,171804,171605A,171605B,333-MT01B,333MT01A,333-GS01,333-GS01A,333-GS02B,333-GS03B,333-GS04B,333-GS05B,333-GS06B,333GS07B,333-GS08B,333-GS09B,,333-GS02A,333-GS03A,333-GS04A,333-GS05A,333-GS06A,333GS07A,333-GS08A,333-GS09A,333-G02,333-G03,333-G04,333-G05,333-G06,333-G07,333-G08,333G09
Only the model 172801 was tested, since the electrical circuit design, layout, components used, internal
wiring and functions were identical for all the above models, with only difference on the shell’s colour.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
5 of 8
4.2 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park, Shenzhen, Guangdong, China
518057
Telephone: +86 (0) 755 2601 2053
Fax: +86 (0) 755 2671 0594
No tests were sub-contracted.
4.3 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with
Registration No.: G-823, R-4188, T-1153 and C-2383 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
6 of 8
4.4 Deviation from Standards
None.
4.5 Abnormalities from Standard Conditions
None.
4.6 Other Information Requested by the Customer
None.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
7 of 8
RF Exposure Evaluation
5.1
RF Exposure Compliance Requirement
5.1.1 Limits
According to FCC Part1.1310: The criteria listed in the following table shall be used to evaluate the
environment impact of human exposure to radio frequency (RF) radiation as specified in part1.1307(b)
F= Frequency in MHz
Friis Formula
Friis transmission formula: Pd = (Pout*G)/(4* Pi * R 2)
Where
Pd = power density in mW/cm2
Pout = output power to antenna in mW
G = gain of antenna in linear scale
Pi = 3.1416
R = distance between observation point and center of the radiator in cm
Pd id the limit of MPE, 1 mW/cm2 . If we know the maximum gain of the antenna and the total power input to
the antenna, through the calculation, we will know the distance r where the MPE limit is reached.
5.1.2 Test Procedure
Software provided by client enabled the EUT to transmit and receive data at lowest, middle and
highest channel individually.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd
Shenzhen Branch.
Report No.: SZEM170900945103
Page:
8 of 8
4.1.3 EUT RF Exposure Evaluation
Antenna Gain: 2.5dBi
Antenna Gain: The maximum Gain measured in fully anechoic chamber is 1.78 in linear scale.
Output Power Into Antenna & RF Exposure Evaluation Distance:
Wifi2.4G:
Test
Frequency
Mode
(MHz)
Max. Conducted
Output
Peak Output
Power to
Power
Antenna
(dBm)
(mW)
Power Density
at R = 20 cm
(mW/cm )
Limit
MPE
(mW/cm )
Ratios
Result
11B
2462
9.49
8.89
0.0031
1.0
0.0031
PASS
11G
2462
13.20
20.89
0.0074
1.0
0.0074
PASS
2462
13.21
20.94
0.0074
1.0
0.0074
PASS
11N20
SISO
Note: Refer to report No. SZEM170900945101 for EUT test Max Conducted Peak Output Power value.
The distance r (4th column) calculated from the Fries transmission formula is far greater than 20 cm separation
requirement.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
Download: 172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Mirror Download [FCC.gov]172801B R/C CAR RF Exposure Info SZEM170900945103 MPE ZHENCHENG TOYS FACTORY
Document ID3633390
Application IDpNSX6JEBaly/bg+zFneQnA==
Document DescriptionRF Exposure Info
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize15.18kB (189743 bits)
Date Submitted2017-11-09 00:00:00
Date Available2017-11-09 00:00:00
Creation Date2017-10-31 16:32:15
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2017-10-31 08:32:16
Document TitleSZEM170900945103 MPE
Document CreatorPScript5.dll Version 5.2.2
Document Author: leo-hj_li

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 8
Create Date                     : 2017:10:31 16:32:15+08:00
Title                           : Microsoft Word - SZEM170900945103 MPE.doc
Producer                        : GPL Ghostscript 8.64
Author                          : leo-hj_li
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2017:10:31 08:32:16Z