172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY

ZHENCHENG TOYS FACTORY R/C CAR

Page 1 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 2 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 3 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 4 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 5 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 6 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 7 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 8 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 9 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 10 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 11 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 12 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 13 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 14 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 15 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 16 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 17 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 18 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 19 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 20 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 21 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 22 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 23 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 24 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 25 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 26 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 27 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 28 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 29 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 30 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 31 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 32 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 33 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 34 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 35 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 36 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 37 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 38 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 39 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 40 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 41 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 42 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 43 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 44 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 45 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 46 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 47 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 48 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 49 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 50 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 51 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 52 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 53 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 54 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 55 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 56 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 57 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 58 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 59 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 60 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 61 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 62 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 63 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 64 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 65 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 66 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 67 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 68 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 69 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 70 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 71 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 72 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 73 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 74 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 75 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 76 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 77 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 78 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 79 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 80 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 81 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 82 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 83 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 84 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 85 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 86 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 87 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 88 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 89 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 90 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 91 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 92 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 93 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 94 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 95 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 96 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 97 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 98 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 99 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 100 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 101 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 102 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 103 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 104 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 105 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 106 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 107 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 108 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 109 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 110 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 111 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 112 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 113 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 114 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 115 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 116 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 117 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 118 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 119 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 120 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Page 121 of 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM170900945101
Page:
1 of 121
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
TEST REPORT
Application No.:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
SZEM1709009451CR
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
ZHENCHENG TOYS FACTORY
CHENGHAI DISTRICT, SHANTOU CITY, GUANGDONG PROVINCE,China
Equipment Under Test (EUT):
EUT Name:
R/C CAR
Model No.:
Please refer to section 2 ♣
Please refer to section 2 of this report which indicates which model was actually
♣
tested and which were electrically identical.
FCC ID:
2AAGP172801B
Trade mark:
CARZON
47 CFR Part 15, Subpart C 15.247
Standard(s) :
Date of Receipt:
2017-09-05
Date of Test:
2017-09-05 to 2017-09-14
Date of Issue:
2017-09-14
Test Result:
Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system
complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International Electrical
Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International Electrical
Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
2 of 121
Revision Record
Version
Chapter
01
Date
2017-09-14
Modifier
Remark
Original
Authorized for issue by:
Leo Li /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
3 of 121
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Antenna
Requirement
47 CFR Part 15,
Subpart C 15.247
Radio Spectrum Matter Part
Item
Standard
Conducted
Emissions at AC
47 CFR Part 15,
Power Line (150kHzSubpart C 15.247
30MHz)
Method
Requirement
47 CFR Part 15,
Subpart C 15.203
& 15.247(c)
Result
Method
Requirement
Result
ANSI C63.10 (2013)
Section 6.2
47 CFR Part 15,
Subpart C 15.207
Pass
N/A
Minimum 6dB
Bandwidth
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.8.1
Conducted Peak
Output Power
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.9.1
Power Spectrum
Density
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.10.2
Conducted Band
Edges Measurement
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.13.3.2
Conducted Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.11
Radiated Emissions
which fall in the
restricted bands
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.10.5
Radiated Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.10.4
47 CFR Part 15,
Subpart C
15.247a(2)
47 CFR Part 15,
Subpart C
15.247(b)(3)
47 CFR Part 15,
Subpart C
15.247(e)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C 15.209
& 15.247(d)
47 CFR Part 15,
Subpart C 15.209
& 15.247(d)
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Pass
Remark:
Model No.: 172801,172802,333-P011A,333-P012A,333-P013A,333-P014A,333-P015A,333-SL01B,333SL01A,171801B,171802B,171801A,171802A,171803,171804,171605A,171605B,333-MT01B,333MT01A,333-GS01,333-GS01A,333-GS02B,333-GS03B,333-GS04B,333-GS05B,333-GS06B,333GS07B,333-GS08B,333-GS09B,,333-GS02A,333-GS03A,333-GS04A,333-GS05A,333-GS06A,333GS07A,333-GS08A,333-GS09A,333-G02,333-G03,333-G04,333-G05,333-G06,333-G07,333-G08,333G09
Only the model 172801 was tested, since the electrical circuit design, layout, components used, internal
wiring and functions were identical for all the above models, with only difference on the shell’s colour.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
4 of 121
Contents
Page
COVER PAGE ..................................................................................................................................... 1
TEST SUMMARY ................................................................................................................................ 3
CONTENTS ......................................................................................................................................... 4
GENERAL INFORMATION .................................................................................................................. 6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ......................................................................................................................... 6
DESCRIPTION OF SUPPORT UNITS .................................................................................................... 6
MEASUREMENT UNCERTAINTY ......................................................................................................... 6
TEST LOCATION ............................................................................................................................. 7
TEST FACILITY ............................................................................................................................... 7
DEVIATION FROM STANDARDS.......................................................................................................... 7
ABNORMALITIES FROM STANDARD CONDITIONS ................................................................................. 7
EQUIPMENT LIST ............................................................................................................................... 8
RADIO SPECTRUM TECHNICAL REQUIREMENT ............................................................................12
6.1
ANTENNA REQUIREMENT ................................................................................................................12
6.1.1 Test Requirement: ..................................................................................................................12
6.1.2 Conclusion ..............................................................................................................................12
RADIO SPECTRUM MATTER TEST RESULTS ................................................................................13
7.1
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) ........................................................13
7.1.1 E.U.T. Operation .....................................................................................................................14
7.1.2 Test Setup Diagram ................................................................................................................14
7.1.3 Measurement Procedure and Data .........................................................................................14
7.2
MINIMUM 6DB BANDWIDTH .............................................................................................................17
7.2.1 E.U.T. Operation .....................................................................................................................17
7.2.2 Test Setup Diagram ................................................................................................................17
7.2.3 Measurement Procedure and Data .........................................................................................18
7.3
CONDUCTED PEAK OUTPUT POWER................................................................................................19
7.3.1 E.U.T. Operation .....................................................................................................................20
7.3.2 Test Setup Diagram ................................................................................................................20
7.3.3 Measurement Procedure and Data .........................................................................................20
7.4
POWER SPECTRUM DENSITY ..........................................................................................................21
7.4.1 E.U.T. Operation .....................................................................................................................21
7.4.2 Test Setup Diagram ................................................................................................................21
7.4.3 Measurement Procedure and Data .........................................................................................22
7.5
CONDUCTED BAND EDGES MEASUREMENT ......................................................................................23
7.5.1 E.U.T. Operation .....................................................................................................................24
7.5.2 Test Setup Diagram ................................................................................................................24
7.5.3 Measurement Procedure and Data .........................................................................................24
7.6
CONDUCTED SPURIOUS EMISSIONS .................................................................................................25
7.6.1 E.U.T. Operation .....................................................................................................................26
7.6.2 Test Setup Diagram ................................................................................................................26
7.6.3 Measurement Procedure and Data .........................................................................................26
7.7
RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS ............................................................27
7.7.1 E.U.T. Operation .....................................................................................................................28
7.7.2 Test Setup Diagram ................................................................................................................28
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
5 of 121
7.7.3 Measurement Procedure and Data .........................................................................................29
7.8
RADIATED SPURIOUS EMISSIONS.....................................................................................................54
7.8.1 E.U.T. Operation .....................................................................................................................55
7.8.2 Test Setup Diagram ................................................................................................................55
7.8.3 Measurement Procedure and Data .........................................................................................56
PHOTOGRAPHS ................................................................................................................................78
8.1
8.2
8.3
8.4
8.5
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) TEST SETUP......................................78
RADIATED SPURIOUS EMISSIONS TEST SETUP (30MHZ-1GHZ) ..........................................................79
RADIATED SPURIOUS EMISSIONS TEST SETUP (ABOVE 1GHZ) ...........................................................79
RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS TEST SETUP .........................................80
EUT CONSTRUCTIONAL DETAILS ....................................................................................................80
APPENDIX ..........................................................................................................................................81
9.1
APPENDIX 15.247................................................................................................................... 81-121
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
6 of 121
General Information
4.1 Details of E.U.T.
Power supply:
Test voltage
Cable:
Type of Modulation:
Operating Frequency:
Channel Number:
Channels Step:
Antenna Type:
Antenna Gain:
Nickel-chromium Battery: 3.7V 380mAh rechargeable battery which
charged by USB port for car
DC 3.7V
USB cable: 60cm unshielded
IEEE for 802.11b: DSSS (CCK, DQPSK, DBPSK)
IEEE for 802.11g: OFDM (64QAM, 16QAM, QPSK, BPSK)
IEEE for 802.11nHT20: OFDM (64QAM, 16QAM, QPSK, BPSK)
IEEE 802.11b/g/n(HT20): 2412MHz to 2462MHz
IEEE 802.11b/g, IEEE 802.11n(HT20): 11 Channels
Channels with 5MHz step
Integral
2.5 dBi
4.2 Description of Support Units
The EUT has been tested as an independent unit.
4.3 Measurement Uncertainty
No.
Item
Radio Frequency
Duty cycle
Occupied Bandwidth
RF conducted power
RF power density
Conducted Spurious emissions
RF Radiated power
Radiated Spurious emission test
10
11
12
Temperature test
Humidity test
Supply voltages
Time
Measurement Uncertainty
7.25 x 10-8
0.37%
3%
0.75dB
2.84dB
0.75dB
4.5dB (below 1GHz)
4.8dB (above 1GHz)
4.5dB (30MHz-1GHz)
4.8dB (1GHz-18GHz)
1°C
3%
1.5%
3%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
7 of 121
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with
Registration No.: G-823, R-4188, T-1153 and C-2383 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
8 of 121
Equipment List
Conducted Emissions at AC Power Line (150kHz-30MHz)
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Shielding Room
ZhongYu Electron
GB-88
SEM001-06
2017-05-10
2018-05-10
Measurement Software
AUDIX
e3
V5.4.1221d
N/A
N/A
N/A
LISN
Rohde & Schwarz
ENV216
SEM007-01
2016-10-09
2017-10-09
LISN
ETS-LINDGREN
3816/2
SEM007-02
2017-04-14
2018-04-13
8 Line ISN
Fischer Custom
Communications
Inc.
FCC-TLISNT8-02
EMC0120
2016-09-28
2017-09-28
4 Line ISN
Fischer Custom
Communications
Inc.
FCC-TLISNT4-02
EMC0121
2016-09-28
2017-09-28
2 Line ISN
Fischer Custom
FCC-TLISNT2-02
EMC0122
2016-09-28
2017-09-28
Coaxial Cable
SGS
N/A
SEM024-01
2017-07-13
2018-07-12
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Coaxial Cable
SGS
N/A
SEM031-01
2017-07-13
2018-07-12
Minimum 6dB Bandwidth
Conducted Peak Output Power
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Coaxial Cable
SGS
N/A
SEM031-01
2017-07-13
2018-07-12
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
9 of 121
Power Spectrum Density
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Coaxial Cable
SGS
N/A
SEM031-01
2017-07-13
2018-07-12
Conducted Band Edges Measurement
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Coaxial Cable
SGS
N/A
SEM031-01
2017-07-13
2018-07-12
Conducted Spurious Emissions
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Signal Generator
Rohde & Schwarz
SML03
SEM006-02
2017-04-14
2018-04-13
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Coaxial Cable
SGS
N/A
SEM031-01
2017-07-13
2018-07-12
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
10 of 121
Radiated Emissions which fall in the restricted bands
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2017-05-02
2020-05-01
Measurement Software
AUDIX
e3 V8.20146-27
N/A
N/A
N/A
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2017-04-14
2018-04-13
ETS-Lindgren
3142C
SEM003-02
2017-03-05
2020-03-05
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
Schwarzbeck
BBHA 9170
SEM003-14
2017-06-16
2020-06-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Black Diamond
Series
BDLNA0118-352810
SEM005-05
2016-10-09
2017-10-09
Compliance
Directions Systems
Inc.
PAP-0126
SEM004-10
2016-10-17
2017-10-17
SEM005-08
2017-04-14
2018-04-13
BiConiLog Antenna
(26-3000MHz)
Horn Antenna
(1-18GHz)
Horn Antenna
(15GHz-40GHz)
Pre-amplifier
(0.1-1300MHz)
Low Noise Amplifier
(100MHz-18GHz)
Pre-amplifier
(0.1-26.5GHz)
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems PAP-2640-50
Inc.
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2017-08-22
2020-08-21
Band filter
N/A
N/A
SEM023-01
N/A
N/A
Coaxial Cable
SGS
N/A
SEM024-01
2017-07-13
2018-07-12
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
ZJ1-2B
SEM002-03
2016-10-12
2017-10-12
ZJ1-2B
SEM002-04
2016-10-12
2017-10-12
N/A
SEM002-08
2016-10-12
2017-10-12
General used equipment
Equipment
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
Shanghai
Meteorological
Industry Factory
Mingle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
11 of 121
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2017-04-18
2018-04-18
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
12 of 121
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(c)
6.1.2 Conclusion
Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit
so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or
electrical connector is prohibited.
15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of
antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this
section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output
power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the
antenna exceeds 6 dBi.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain
of the antenna is 2.5 dBi.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
13 of 121
Radio Spectrum Matter Test Results
7.1 Conducted Emissions at AC Power Line (150kHz-30MHz)
Test Requirement
Test Method:
Limit:
Frequency of emission(MHz)
47 CFR Part 15, Subpart C 15.207
ANSI C63.10 (2013) Section 6.2
Conducted limit(dBµV)
Quasi-peak
0.15-0.5
66 to 56*
0.5-5
56
5-30
60
*Decreases with the logarithm of the frequency.
Average
56 to 46*
46
50
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
14 of 121
7.1.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 45 % RH
Test Mode:
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode with all modulation types. All data rates for each modulation type have been
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.1.2 Test Setup Diagram
7.1.3 Measurement Procedure and Data
1) The mains terminal disturbance voltage test was conducted in a shielded room.
2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization
Network) which provides a 50ohm/50µH + 5ohm linear impedance. The power cables of all other units
of the EUT were connected to a second LISN 2, which was bonded to the ground reference plane in the
same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was used to connect
multiple power cables to a single LISN provided the rating of the LISN was not exceeded.
3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane.
And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane,
4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m
from the vertical ground reference plane. The vertical ground reference plane was bonded to the
horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under
test and bonded to a ground reference plane for LISNs mounted on top of the ground reference plane.
This distance was between the closest points of the LISN 1 and the EUT. All other units of the EUT and
associated equipment was at least 0.8 m from the LISN 2.
5) In order to find the maximum emission, the relative positions of equipment and all of the interface
cables must be changed according to ANSI C63.10 on conducted measurement.
Remark: LISN=Read Level+ Cable Loss+ LISN Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
15 of 121
Mode:a; Line:Live Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
16 of 121
Mode:a; Line:Neutral Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
17 of 121
7.2 Minimum 6dB Bandwidth
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(2)
ANSI C63.10 (2013) Section 11.8.1
≥500 kHz
7.2.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.2.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
18 of 121
7.2.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
19 of 121
7.3 Conducted Peak Output Power
Test Requirement
Test Method:
Limit:
Frequency range(MHz)
902-928
2400-2483.5
5725-5850
47 CFR Part 15, Subpart C 15.247(b)(3)
ANSI C63.10 (2013) Section 11.9.1
Output power of the intentional radiator(watt)
1 for ≥50 hopping channels
0.25 for 25≤ hopping channels <50
1 for digital modulation
1 for ≥75 non-overlapping hopping channels
0.125 for all other frequency hopping systems
1 for digital modulation
1 for frequency hopping systems and digital modulation
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
20 of 121
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.3.2 Test Setup Diagram
7.3.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
21 of 121
7.4 Power Spectrum Density
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(e)
ANSI C63.10 (2013) Section 11.10.2
≤8dBm in any 3 kHz band during any time interval of continuous
transmission
7.4.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.4.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
22 of 121
7.4.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
23 of 121
7.5 Conducted Band Edges Measurement
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 11.13.3.2
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum or digitally modulated intentional radiator is operating, the radio
frequency power that is produced by the intentional radiator shall be at least
20 dB below that in the 100 kHz bandwidth within the band that contains the
highest level of the desired power, based on either an RF conducted or a
radiated measurement, provided the transmitter demonstrates compliance
with the peak conducted power limits. If the transmitter complies with the
conducted power limits based on the use of RMS averaging over a time
interval, as permitted under paragraph (b)(3) of this section, the attenuation
required under this paragraph shall be 30 dB instead of 20 dB. Attenuation
below the general limits specified in §15.209(a) is not required. In addition,
radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits specified in
§15.209(a) (see §15.205(c)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
24 of 121
7.5.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.5.2 Test Setup Diagram
7.5.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
25 of 121
7.6 Conducted Spurious Emissions
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 11.11
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum or digitally modulated intentional radiator is operating, the radio
frequency power that is produced by the intentional radiator shall be at least
20 dB below that in the 100 kHz bandwidth within the band that contains the
highest level of the desired power, based on either an RF conducted or a
radiated measurement, provided the transmitter demonstrates compliance
with the peak conducted power limits. If the transmitter complies with the
conducted power limits based on the use of RMS averaging over a time
interval, as permitted under paragraph (b)(3) of this section, the attenuation
required under this paragraph shall be 30 dB instead of 20 dB. Attenuation
below the general limits specified in §15.209(a) is not required. In addition,
radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits specified in
§15.209(a) (see §15.205(c)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
26 of 121
7.6.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.6.2 Test Setup Diagram
7.6.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
27 of 121
7.7 Radiated Emissions which fall in the restricted bands
Test Requirement
Test Method:
Measurement Distance:
Limit:
Frequency(MHz)
47 CFR Part 15, Subpart C 15.209 & 15.247(d)
ANSI C63.10 (2013) Section 6.10.5
3m
Field
strength(microvolts/meter)
Measurement
distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a
CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000
MHz. Radiated emission limits in these three bands are based on measurements employing an
average detector, the peak field strength of any emission shall not exceed the maximum permitted
average limits specified above by more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
28 of 121
7.7.1 E.U.T. Operation
Operating Environment:
Temperature:
23 °C
Atmospheric Pressure:
1005 mbar
Humidity: 54 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.7.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
29 of 121
7.7.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of
the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
30 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
31 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
32 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
33 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
34 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
35 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
36 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
37 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
38 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
39 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
40 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
41 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
42 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
43 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
44 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
45 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
46 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
47 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
48 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
49 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
50 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
51 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
52 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
53 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
54 of 121
7.8 Radiated Spurious Emissions
Test Requirement
Test Method:
Measurement Distance:
Limit:
Frequency(MHz)
47 CFR Part 15, Subpart C 15.209 & 15.247(d)
ANSI C63.10 (2013) Section 6.10.4
3m
Field
strength(microvolts/meter)
Measurement
distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a
CISPR quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000
MHz. Radiated emission limits in these three bands are based on measurements employing an
average detector, the peak field strength of any emission shall not exceed the maximum permitted
average limits specified above by more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
55 of 121
7.8.1 E.U.T. Operation
Operating Environment:
Temperature:
25 °C
Atmospheric Pressure:
1005 mbar
Humidity: 55 % RH
Pretest these
a:Charge + TX mode_Keep the EUT in charging and continuously transmitting
mode to find the mode with all modulation types. All data rates for each modulation type have been
worst case:
tested and found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data
rate @ 6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst
case of IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
b:TX mode_Keep the EUT in continuously transmitting mode with all modulation
types. All data rates for each modulation type have been tested and found the data
rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @ 6Mbps is the worst
case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of IEEE
802.11n(HT20). Only the data of worst case is recorded in the report.
The worst case
for final test:
b:TX mode_Keep the EUT in charging and continuously transmitting mode with all
modulation types. All data rates for each modulation type have been tested and
found the data rate @ 1Mbps is the worst case of IEEE 802.11b; data rate @
6Mbps is the worst case of IEEE 802.11g; data rate @ 6.5Mbps is the worst case of
IEEE 802.11n(HT20). Only the data of worst case is recorded in the report.
7.8.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
56 of 121
7.8.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a
3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of
the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted
on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
57 of 121
30MHz~1GHz
QP value:
Mode:a; Polarization:Horizontal;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
58 of 121
Mode:a; Polarization:Vertical;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
59 of 121
Above 1GHz
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
60 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
61 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
62 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
63 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
64 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11b; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
65 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
66 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
67 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
68 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
69 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
70 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11g; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
71 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
72 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
73 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
74 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
75 of 121
Mode:a; Polarization:Horizontal; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
76 of 121
Mode:a; Polarization:Vertical; Modulation Type:802.11n; bandwidth:20MHz; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
77 of 121
Remark:
1) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The basic
equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
2) Scan from 9kHz to 25GHz, the disturbance above 13GHz and below 30MHz was very low, and the
above harmonics were the highest point could be found when testing, so only the above harmonics had
been displayed. The amplitude of spurious emissions from the radiator which are attenuated more than
20dB below the limit need not be reported.
3) As shown in this section, for frequencies above 1GHz, the field strength limits are based on average
limits. However, the peak field strength of any emission shall not exceed the maximum permitted
average limits specified above by more than 20 dB under any condition of modulation. So, only the peak
measurements were shown in the report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
78 of 121
Photographs
8.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
79 of 121
8.2 Radiated Spurious Emissions Test Setup (30MHz-1GHz)
8.3 Radiated Spurious Emissions Test Setup (Above 1GHz)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
80 of 121
8.4 Radiated Emissions which fall in the restricted bands Test Setup
8.5 EUT Constructional Details
Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1709009451CR.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
81 of 121
Appendix
9.1 Appendix 15.247
1.6dB Bandwidth
Test Mode
Test
Ant
EBW[MHz]
Limit[MHz
Verdict
11B
2412
Ant1
10.080
>=0.5
PASS
11B
2437
Ant1
10.110
>=0.5
PASS
11B
2462
Ant1
10.140
>=0.5
PASS
11G
2412
Ant1
16.410
>=0.5
PASS
11G
2437
Ant1
16.410
>=0.5
PASS
11G
2462
Ant1
16.365
>=0.5
PASS
11N20SISO
2412
Ant1
17.670
>=0.5
PASS
11N20SISO
2437
Ant1
17.670
>=0.5
PASS
11N20SISO
2462
Ant1
17.640
>=0.5
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
82 of 121
6dB Bandwidth_11B_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 15 ms
Marker 3 [T1 ]
-0.78 dBm
2.417070000 GHz
Marker 1 [T1 ]
0.9 dB
6.63 dBm
2.411520000 GHz
10
Marker 2 [T1 ]
1 PK
VIEW
D1 0.63 dBm
0.59 dBm
2.406990000 GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
6dB Bandwidth_11B_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 15 ms
Marker 3 [T1 ]
-0.06 dBm
2.442070000 GHz
Marker 1 [T1 ]
0.9 dB
10
6.52 dBm
2.436520000 GHz
Marker 2 [T1 ]
1 PK
VIEW
D1 0.52 dBm
0.30 dBm
2.431960000 GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
83 of 121
6dB Bandwidth_11B_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 3 [T1 ]
0.27 dBm
SWT 15 ms
2.467070000 GHz
Marker 1 [T1 ]
0.9 dB
10
6.42 dBm
2.461490000 GHz
Marker 2 [T1 ]
1 PK
VIEW
-2.16 dBm
2.456930000 GHz
D1 0.42 dBm
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
6dB Bandwidth_11G_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 3 [T1 ]
-3.70 dBm
SWT 15 ms
2.420220000 GHz
Marker 1 [T1 ]
0.9 dB
2.59 dBm
2.418300000 GHz
10
1 PK
VIEW
D1 -3.41 dBm
Marker 2 [T1 ]
-3.87 dBm
2.403810000 GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
84 of 121
6dB Bandwidth_11G_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 3 [T1 ]
-3.90 dBm
SWT 15 ms
2.445220000 GHz
Marker 1 [T1 ]
0.9 dB
3.22 dBm
2.435770000 GHz
10
1 PK
VIEW
Marker 2 [T1 ]
D1 -2.78 dBm
-3.47 dBm
2.428810000 GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
6dB Bandwidth_11G_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 3 [T1 ]
-4.07 dBm
SWT 15 ms
2.470205000 GHz
Marker 1 [T1 ]
0.9 dB
3.20 dBm
2.455760000 GHz
10
1 PK
VIEW
Marker 2 [T1 ]
D1 -2.8 dBm
-2.81 dBm
2.453840000 GHz
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
85 of 121
6dB Bandwidth_11N20SISO_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 3 [T1 ]
-3.85 dBm
SWT 15 ms
2.420850000 GHz
Marker 1 [T1 ]
0.9 dB
2.78 dBm
2.405760000 GHz
10
1 PK
VIEW
Marker 2 [T1 ]
-4.46 dBm
32.403180000 GHz LVL
D1 -3.22 dBm
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
6dB Bandwidth_11N20SISO_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 15 ms
2.445850000 GHz
Marker 1 [T1 ]
0.9 dB
3.27 dBm
2.438260000 GHz
10
1 PK
VIEW
Marker 3 [T1 ]
-4.09 dBm
Marker 2 [T1 ]
-3.53 dBm
32.428180000 GHz LVL
D1 -2.73 dBm
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
86 of 121
6dB Bandwidth_11N20SISO_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 15 ms
3.45 dBm
2.456990000 GHz
Marker 2 [T1 ]
2.470850000 GHz
Marker 1 [T1 ]
0.9 dB
10
1 PK
VIEW
Marker 3 [T1 ]
-3.57 dBm
-2.67 dBm
32.453210000 GHz LVL
D1 -2.55 dBm
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
87 of 121
3.Maximum peak conducted output power
Test Mode
Test Channel
Ant
Power[dBm]
Limit[dBm]
Verdict
11B
2412
Ant1
9.11
<30
PASS
11B
2437
Ant1
9.42
<30
PASS
11B
2462
Ant1
9.49
<30
PASS
11G
2412
Ant1
13.07
<30
PASS
11G
2437
Ant1
12.84
<30
PASS
11G
2462
Ant1
13.20
<30
PASS
11N20SISO
2412
Ant1
12.92
<30
PASS
11N20SISO
2437
Ant1
13.12
<30
PASS
11N20SISO
2462
Ant1
13.21
<30
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
88 of 121
Maximum peak conducted output power_11B_2412_Ant1
Ref
* Att
20 dBm
Offset
30 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
10
SGL
1 PK
MAXH
-10
-20
LVL
-30
-40
-50
-60
3DB
-70
Center 2.412 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
9.11 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
89 of 121
Maximum peak conducted output power_11B_2437_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.437 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
9.43 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
90 of 121
Maximum peak conducted output power_11B_2462_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.462 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
9.49 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
91 of 121
Maximum peak conducted output power_11G_2412_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.412 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
13.07 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
92 of 121
Maximum peak conducted output power_11G_2437_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.437 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
12.84 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
93 of 121
Maximum peak conducted output power_11G_2462_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.462 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
13.20 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
94 of 121
Maximum peak conducted output power_11N20SISO_2412_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.412 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
12.92 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
95 of 121
Maximum peak conducted output power_11N20SISO_2437_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.437 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
13.12 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
96 of 121
Maximum peak conducted output power_11N20SISO_2462_Ant1
Ref
10
10.9 dBm
Offset
* Att
20 dB
* RBW 1 MHz
* VBW 3 MHz
* SWT 100 ms
0.9 dB
-10
1 PK
MAXH
-20
-30
LVL
-40
-50
-60
-70
3DB
-80
Center 2.462 GHz
Tx Channel
Bandwidth
3 MHz/
20 MHz
Power
Span 30 MHz
13.21 dBm
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
97 of 121
4.Maximum Peak power spectral density
Verdict
-7.7
Limit[dBm/3kHz
<8.00
Ant1
-8.44
<8.00
PASS
2462
Ant1
-8.73
<8.00
PASS
11G
2412
Ant1
-11.77
<8.00
PASS
11G
2437
Ant1
-12.53
<8.00
PASS
11G
2462
Ant1
-12.21
<8.00
PASS
11N20SISO
2412
Ant1
-11.76
<8.00
PASS
11N20SISO
2437
Ant1
-11.34
<8.00
PASS
11N20SISO
2462
Ant1
-11.33
<8.00
PASS
Test Mode
Test Channel
Ant
PSD[dBm/3kHz]
11B
2412
Ant1
11B
2437
11B
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
98 of 121
Maximum Peak power spectral density_11B_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-7.70 dBm
2.412720000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
Maximum Peak power spectral density_11B_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-8.44 dBm
2.438530000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
99 of 121
Maximum Peak power spectral density_11B_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
Marker 1 [T1 ]
-8.73 dBm
SWT 3.4 s
2.461370000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
Maximum Peak power spectral density_11G_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
Marker 1 [T1 ]
-11.77 dBm
SWT 3.4 s
2.418210000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
100 of 121
Maximum Peak power spectral density_11G_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-12.53 dBm
2.440450000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
Maximum Peak power spectral density_11G_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-12.21 dBm
2.455790000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
101 of 121
Maximum Peak power spectral density_11N20SISO_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-11.76 dBm
2.406000000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.412 GHz
3 MHz/
Span
30 MHz
Maximum Peak power spectral density_11N20SISO_2437_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-11.34 dBm
2.435110000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.437 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
102 of 121
Maximum Peak power spectral density_11N20SISO_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
3 kHz
* VBW
10 kHz
SWT 3.4 s
Marker 1 [T1 ]
-11.33 dBm
2.455760000 GHz
0.9 dB
SGL
10
1 PK
MAXH
LVL
-10
-20
-30
3DB
-40
-50
-60
-70
-80
Center
2.462 GHz
3 MHz/
Span
30 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
103 of 121
5.Band-edge for RF Conducted Emissions
Test
Mode
Test
Channel
Ant
Carrier
Power[dBm]
Max. Spurious
Level
[dBm]
Limit
[dBm]
Verdict
11B
2412
Ant1
6.600
-53.315
<-13.4
PASS
11B
2462
Ant1
6.700
-51.567
<-13.3
PASS
11G
2412
Ant1
2.930
-44.973
<-17.07
PASS
11G
2462
Ant1
2.800
-39.702
<-17.2
PASS
11N20SISO
2412
Ant1
1.540
-41.061
<-18.46
PASS
11N20SISO
2462
Ant1
3.230
-33.279
<-16.77
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
104 of 121
Band-edge for RF Conducted Emissions_11B_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 4 [T1 ]
-53.32 dBm
SWT 15 ms
2.388430000 GHz
Marker 1 [T1 ]
0.9 dB
6.60 dBm
2.412580000
GHz A
SGL
Marker 2 [T1 ]
10
1 PK
MAXH
-42.00 dBm
2.400000000 GHz
LVL
Marker 3 [T1 ]
-58.07 dBm
-10
2.390000000 GHz
D1 -13.4 dBm
-20
-30
3DB
-40
-50
-60
-70
-80
Start
2.31 GHz
11.5 MHz/
Stop
2.425 GHz
Band-edge for RF Conducted Emissions_11B_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 4 [T1 ]
-51.57 dBm
SWT 20 ms
2.488300000 GHz
Marker 1 [T1 ]
0.9 dB
6.70 dBm
2.462525000 GHz
10
SGL
Marker 2 [T1 ]
1 PK
MAXH
-54.29 dBm
2.483500000 GHz
LVL
Marker 3 [T1 ]
-57.75 dBm
-10
2.500000000 GHz
D1 -13.3 dBm
-20
-30
3DB
-40
-50
-60
-70
-80
Start
2.45 GHz
5 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
105 of 121
Band-edge for RF Conducted Emissions_11G_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 4 [T1 ]
-44.97 dBm
SWT 15 ms
2.389925000 GHz
Marker 1 [T1 ]
0.9 dB
2.93 dBm
2.413270000 GHz
10
SGL
Marker 2 [T1 ]
-35.53 dBm
2.400000000 GHz
1 PK
MAXH
LVL
Marker 3 [T1 ]
-47.29 dBm
-10
2.390000000 GHz
D1 -17.07 dBm
-20
-30
3DB
-40
-50
-60
-70
-80
Start
2.31 GHz
11.5 MHz/
Stop
2.425 GHz
Band-edge for RF Conducted Emissions_11G_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 20 ms
Marker 4 [T1 ]
-39.70 dBm
2.483900000 GHz
Marker 1 [T1 ]
0.9 dB
2.80 dBm
2.463250000 GHz
10
1 PK
MAXH
SGL
Marker 2 [T1 ]
-39.72 dBm
2.483500000 GHz
LVL
Marker 3 [T1 ]
-57.16 dBm
-10
2.500000000 GHz
D1 -17.2 dBm
-20
-30
3DB
24
-40
-50
-60
-70
-80
Start
2.45 GHz
5 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
106 of 121
Band-edge for RF Conducted Emissions_11N20SISO_2412_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
Marker 4 [T1 ]
-41.06 dBm
SWT 15 ms
2.389867500 GHz
Marker 1 [T1 ]
0.9 dB
1.54 dBm
2.414592500 GHz
10
SGL
Marker 2 [T1 ]
-33.76
dBm
2.400000000 GHz
1 PK
MAXH
LVL
Marker 3 [T1 ]
-44.46 dBm
-10
2.390000000 GHz
D1 -18.46 dBm
-20
-30
3DB
-40
-50
-60
-70
-80
Start
2.31 GHz
11.5 MHz/
Stop
2.425 GHz
Band-edge for RF Conducted Emissions_11N20SISO_2462_Ant1
Ref
20
* Att
20 dBm
Offset
20 dB
* RBW
100 kHz
* VBW
300 kHz
SWT 20 ms
2.483575000 GHz
Marker 1 [T1 ]
0.9 dB
3.23 dBm
2.457000000 GHz
10
SGL
Marker 2 [T1 ]
1 PK
MAXH
Marker 4 [T1 ]
-33.28 dBm
-38.89 dBm
2.483500000 GHz
LVL
Marker 3 [T1 ]
-55.44 dBm
-10
2.500000000 GHz
D1 -16.77 dBm
-20
-30
3DB
-40
-50
-60
-70
-80
Start
2.45 GHz
5 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation
of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its
intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all
their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or
falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report
refer only to the sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170900945101
Page:
107 of 121
6.RF Conducted Spurious Emissions
VBW
[kHz]
Pref[dBm
Max.
Level
[dBm]
1000
3000
-29.570
<-14
PASS
25000
1000
3000
-54.820
<-14
PASS
30
10000
1000
3000
5.91
-30.550
Download: 172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Mirror Download [FCC.gov]172801B R/C CAR Test Report SZEM170900945101 WIFI2.4G RPT ZHENCHENG TOYS FACTORY
Document ID3633389
Application IDpNSX6JEBaly/bg+zFneQnA==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize343.61kB (4295132 bits)
Date Submitted2017-11-09 00:00:00
Date Available2017-11-09 00:00:00
Creation Date2017-10-27 15:27:45
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2017-10-27 07:27:52
Document TitleSZEM170900945101 WIFI2.4G RPT
Document CreatorPScript5.dll Version 5.2.2
Document Author: kate_bian

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 121
Create Date                     : 2017:10:27 15:27:45+08:00
Title                           : Microsoft Word - SZEM170900945101 WIFI2.4G RPT.doc
Producer                        : GPL Ghostscript 8.64
Author                          : kate_bian
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2017:10:27 07:27:52Z