FCC ID 2ABH3-FAN17

LTE WiFi Router

by Furrion Ltd.

Grantee Code: 2ABH3   Product Code: FAN17
Latest application date: 2018-08-10

FCC ID Device Details

FCC ID2ABH3-FAN17
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ABH3
Product CodeFAN17
Applicant BusinessFurrion Ltd.
Related Domains furrion.com sgs.com
Equipment ClassLTE WiFi Router
Test FirmSGS-CSTC Standards Technical Services Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2018-08-10
777-787 MHzOriginal Equipment2018-08-10
2412-2462 MHzOriginal Equipment2018-08-10

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-08-10PDF 1.4 MB
Internal PhotosInternal Photos2018-08-10PDF 1.8 MB
External PhotosExternal Photos2018-08-10PDF 496.2 KB
LabelID Label/Location Info2018-08-10PDF 275.7 KB
Test Setup PhotoTest Setup Photos2018-08-10PDF 339.2 KB
Test Setup PhotosTest Setup Photos2018-08-10PDF 339.2 KB
Test ReportTest Report2018-08-10PDF 1.4 MB
Test reportTest Report2018-08-10PDF 5.2 MB
Test reportTest Report2018-08-10PDF 1.7 MB
Test reportTest Report2018-08-10PDF 5.2 MB
Authorization LetterCover Letter(s)2018-08-10PDF 19.6 KB
Channel StatementCover Letter(s)2018-08-10PDF 11 KB
Confidentiality LetterCover Letter(s)2018-08-10PDF 15.1 KB
RF Exposure InfoRF Exposure Info2018-08-10PDF 201.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 197.2 KB
Schematics Metadata onlySchematicsPDF 652.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 38.5 KB
Operational Description-software Metadata onlySDR Software/Security InfPDF 93.6 KB
Tune up Procedure Metadata onlyParts List/Tune Up InfoPDF 44.7 KB
Tune up procedure- Metadata onlyParts List/Tune Up InfoPDF 44.7 KB

Application Information

Application IDw9Ih/j7mV8/Lx6UgcjyCAw==
Final Action Date2018-08-10
Application PurposeOriginal Equipment
Applicant FRN0023196967
ModelFAN17
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionLTE WiFi Router
Responsible PartyThomas Wernisch, Director-Engineering & Quality, thomaswernisch@furrion.com , +852-36861585
Technical ContactKeny xu, SGS-CSTC Standards Technical Services Co., Ltd, keny.xu@sgs.com , 0755-2654 4119
Non-Technical ContactJoyce shi, SGS-CSTC Standards Technical Services Co., Ltd, Joyce.Shi@sgs.com , 0755-25328662
Test FirmDerek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth modes

Applications

Application IDDatePurpose
w9Ih/j7mV8/Lx6UgcjyCAw==2018-08-10Original Equipment
pts6pW3m/UNTZmL6XoIVjg==2018-08-10Original Equipment
W/i4P4xzgjVQq7RTaXrJ2Q==2018-08-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
777-787 MHz0.34042.5ppm4M49W7D27
777-787 MHz0.33572.5ppm8M92G7D27
777-787 MHz0.33272.5ppm8M94W7D27
777-787 MHz0.39542.5ppm4M49G7D27
1710-1755 MHz0.84142.5ppm13M5G7D27
1710-1755 MHz0.73962.5ppm13M5W7D27
1710-1755 MHz0.7432.5ppm18M0G7D27
1710-1755 MHz0.63972.5ppm18M0W7D27
1850-1910 MHz0.72282.5ppm13M6W7D24E
1850-1910 MHz0.71612.5ppm18M0G7D24E
1850-1910 MHz0.62522.5ppm18M0W7D24E
2412-2462 MHz0.0615CCC
2422-2452 MHz0.059415CCC
5180-5240 MHz0.021115ECC
5190-5230 MHz0.020715ECC
5210 MHz0.02215ECC
5745-5825 MHz0.021815ECC
5775-5795 MHz0.021615ECC
5775 MHz0.020415ECC

Grants

TCB Grant - Application w9Ih/j7mV8/Lx6UgcjyCAw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/10/2018

Application Dated: 08/10/2018
Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street
Kwun Tong, Kowloon
Hong Kong,
Hong Kong
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0211  
CC 15E 5190.0  -  5230.0 0.0207  
CC 15E 5210.0  -  5210.0 0.022  
CC 15E 5745.0  -  5825.0 0.0218  
CC 15E 5775.0  -  5795.0 0.0216  
CC 15E 5775.0  -  5775.0 0.0204  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth modes

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application w9Ih/j7mV8/Lx6UgcjyCAw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street Kwun Tong, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 08/10/2018

Application Dated: 08/10/2018
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0211  
CC 15E 5190.0  -  5230.0 0.0207  
CC 15E 5210.0  -  5210.0 0.022  
CC 15E 5745.0  -  5825.0 0.0218  
CC 15E 5775.0  -  5795.0 0.0216  
CC 15E 5775.0  -  5775.0 0.0204  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application W/i4P4xzgjVQq7RTaXrJ2Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/10/2018

Application Dated: 08/10/2018
Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street
Kwun Tong, Kowloon
Hong Kong,
Hong Kong
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: Digital Transmission System
Notes: LTE WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06  
CC 15C 2422.0  -  2452.0 0.0594  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application W/i4P4xzgjVQq7RTaXrJ2Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street Kwun Tong, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 08/10/2018

Application Dated: 08/10/2018
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: Digital Transmission System
Notes: LTE WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06  
CC 15C 2422.0  -  2452.0 0.0594  

The listed output power is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application pts6pW3m/UNTZmL6XoIVjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/10/2018

Application Dated: 08/10/2018
Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street
Kwun Tong, Kowloon
Hong Kong,
Hong Kong
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: LTE WiFi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.0  -  1910.0 0.8147 2.5  PM 13M6G7D
24E 1850.0  -  1910.0 0.7228 2.5  PM 13M6W7D
24E 1850.0  -  1910.0 0.7161 2.5  PM 18M0G7D
24E 1850.0  -  1910.0 0.6252 2.5  PM 18M0W7D
27 1710.0  -  1755.0 0.8414 2.5  PM 13M5G7D
27 1710.0  -  1755.0 0.7396 2.5  PM 13M5W7D
27 1710.0  -  1755.0 0.743 2.5  PM 18M0G7D
27 1710.0  -  1755.0 0.6397 2.5  PM 18M0W7D
27 777.0  -  787.0 0.3954 2.5  PM 4M49G7D
27 777.0  -  787.0 0.3404 2.5  PM 4M49W7D
27 777.0  -  787.0 0.3357 2.5  PM 8M92G7D
27 777.0  -  787.0 0.3327 2.5  PM 8M94W7D

Output power listed is ERP for LTE Band 13 and EIRP for LTE Band 2/4. This device has 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 2 and LTE Band 4; 5 MHz and 10 MHz bandwidth modes for LTE Band 13 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application pts6pW3m/UNTZmL6XoIVjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Furrion Ltd.
4/F, Flat C & D, The Grid, 133 Wai Yip Street Kwun Tong, Kowloon
Hong Kong,
Hong Kong
  Date of Grant: 08/10/2018

Application Dated: 08/10/2018
 
Attention: Thomas Wernisch , Director-Engineering & Quality

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ABH3-FAN17
Name of Grantee:  Furrion Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: LTE WiFi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1850.0  -  1910.0 0.8147 2.5  PM 13M6G7D
24E 1850.0  -  1910.0 0.7228 2.5  PM 13M6W7D
24E 1850.0  -  1910.0 0.7161 2.5  PM 18M0G7D
24E 1850.0  -  1910.0 0.6252 2.5  PM 18M0W7D
27 1710.0  -  1755.0 0.8414 2.5  PM 13M5G7D
27 1710.0  -  1755.0 0.7396 2.5  PM 13M5W7D
27 1710.0  -  1755.0 0.743 2.5  PM 18M0G7D
27 1710.0  -  1755.0 0.6397 2.5  PM 18M0W7D
27 777.0  -  787.0 0.3954 2.5  PM 4M49G7D
27 777.0  -  787.0 0.3404 2.5  PM 4M49W7D
27 777.0  -  787.0 0.3357 2.5  PM 8M92G7D
27 777.0  -  787.0 0.3327 2.5  PM 8M94W7D

Output power listed is ERP for LTE Band 13 and EIRP for LTE Band 2/4. This device has 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Band 2 and LTE Band 4; 5 MHz and 10 MHz bandwidth modes for LTE Band 13 The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and not ne co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: