FCC ID 2ACJF-FGW-GR240BG

Fiber Gateway 4x4

by Altice Labs, S.A.

Grantee Code: 2ACJF   Product Code: FGWGR240BG
Latest application date: 2018-04-12

FCC ID Device Details

FCC ID2ACJF-FGW-GR240BG
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ACJF
Product CodeFGWGR240BG
Applicant BusinessAltice Labs, S.A. 🇵🇹
Related Domains telecom.pt
Equipment ClassFiber Gateway 4x4
Test FirmIntertekTesting Services NA Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2018-04-12
5180-5240 MHzOriginal Equipment2017-10-29
2412-2462 MHzOriginal Equipment2017-10-28

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2018-04-12PDF 1.9 MB
Users manualUsers Manual2017-10-29PDF 1.9 MB
Internal photosInternal Photos2017-10-29PDF 1.9 MB
External photosExternal Photos2017-10-29PDF 3.3 MB
Label and location infoID Label/Location Info2017-10-29PDF 1 MB
Block diagram BlockedBlock Diagram2017-10-29PDF 199.3 KB
Schematics BlockedSchematics2017-10-29PDF 430.5 KB
Operational description BlockedOperational Description2018-04-12PDF 37.3 KB
Software Security Requirements per KDB594280v01r03 BlockedOperational Description2018-04-12PDF 759.9 KB
Operational description and antenna BlockedOperational Description2017-10-29PDF 338.3 KB
Software Security Declaration BlockedOperational Description2017-10-29PDF 141 KB
(FGW GR240BG) Software Security Declaration BlockedOperational Description2017-10-28PDF 141 KB
Test setup photosTest Setup Photos2017-10-29PDF 650.8 KB
Test report DFSTest Report2018-04-12PDF 2.4 MB
Test report U-NII- 2CTest Report2018-04-12PDF 5 MB
Test report U-NII-2ATest Report2018-04-12PDF 3.9 MB
Test report 5 GHz Part 1Test Report2017-10-29PDF 3.1 MB
Test report 5 GHz Part 2Test Report2017-10-29PDF 3.2 MB
Test Report 2.4GHz Part 1Test Report2017-10-28PDF 4.2 MB
Test Report 2.4GHz Part 2Test Report2017-10-28PDF 5.4 MB
Test Report 2.4GHz Part 3Test Report2017-10-28PDF 4.2 MB
Test Report 2.4GHz Part 4Test Report2017-10-28PDF 4.7 MB
Test Report 2.4GHz Part 5Test Report2017-10-28PDF 3.7 MB
Test report 5 GHz Part2Test Report2017-10-28PDF 3.2 MB
C2PC Cover LetterCover Letter(s)2018-04-12PDF 162.4 KB
Letter of AgencyCover Letter(s)2017-10-29PDF 110.9 KB
RF exposure evaluationRF Exposure Info2018-04-12PDF 495.7 KB
RF Exposure evaluationRF Exposure Info2017-10-29PDF 495.2 KB
Software security info Metadata onlyOperational DescriptionPDF 141 KB

Application Information

Application IDmKWD01SzogLf6KrA2wSgBA==
Final Action Date2018-04-12
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023676745
ModelFGW-GR240BG
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionFiber Gateway 4x4
Responsible PartyRicardo Gomes Cunha, Telecom Engineer, rcunha@telecom.pt , +351 234 403 200
AgentSuresh Suresh Suresh, Intertek Testing Services, surech.kondapalli@intertek.com , 6504632900
Test FirmCharles Parker, IntertekTesting Services NA Inc., charles.parker@intertek.com , 650-463-2900
TCB EmailTCB_Admin@intertek.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.

Applications

Application IDDatePurpose
mKWD01SzogLf6KrA2wSgBA==2018-04-12Class II permissive change or modification of presently authorized equipment
BFYPjiSL1/6mcjc2FEx5DQ==2017-10-29Original Equipment
/86P6zig3/Ttc47DA/qSzQ==2017-10-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.99415CCC, MO
2422-2452 MHz0.71715CCC, MO
5180-5240 MHz0.11715ECC, MO
5190-5230 MHz0.05915ECC, MO
5210 MHz0.04715ECC, MO
5260-5320 MHz0.14115ECC, MO, ND
5270-5310 MHz0.17115ECC, MO, ND
5290 MHz0.12615ECC, MO, ND
5500-5720 MHz0.14515ECC, MO, ND
5510-5710 MHz0.17815ECC, MO, ND
5530-5690 MHz0.1215ECC, MO, ND
5745-5825 MHz0.76615ECC, MO
5755-5795 MHz0.97615ECC, MO
5775 MHz0.86315ECC, MO

Grants

TCB Grant - Application mKWD01SzogLf6KrA2wSgBA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 04/12/2018

Application Dated: 01/19/2018
Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Fiber Gateway 4x4
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.117  
CC MO 15E 5190.0  -  5230.0 0.059  
CC MO 15E 5210.0  -  5210.0 0.047  
CC MO ND 15E 5260.0  -  5320.0 0.141  
CC MO ND 15E 5270.0  -  5310.0 0.171  
CC MO ND 15E 5290.0  -  5290.0 0.126  
CC MO ND 15E 5500.0  -  5720.0 0.145  
CC MO ND 15E 5510.0  -  5710.0 0.178  
CC MO ND 15E 5530.0  -  5690.0 0.12  
CC MO 15E 5745.0  -  5825.0 0.766  
CC MO 15E 5755.0  -  5795.0 0.976  
CC MO 15E 5775.0  -  5775.0 0.863  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application mKWD01SzogLf6KrA2wSgBA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
  Date of Grant: 04/12/2018

Application Dated: 01/19/2018
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Fiber Gateway 4x4
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.117  
CC MO 15E 5190.0  -  5230.0 0.059  
CC MO 15E 5210.0  -  5210.0 0.047  
CC MO ND 15E 5260.0  -  5320.0 0.141  
CC MO ND 15E 5270.0  -  5310.0 0.171  
CC MO ND 15E 5290.0  -  5290.0 0.126  
CC MO ND 15E 5500.0  -  5720.0 0.145  
CC MO ND 15E 5510.0  -  5710.0 0.178  
CC MO ND 15E 5530.0  -  5690.0 0.12  
CC MO 15E 5745.0  -  5825.0 0.766  
CC MO 15E 5755.0  -  5795.0 0.976  
CC MO 15E 5775.0  -  5775.0 0.863  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application BFYPjiSL1/6mcjc2FEx5DQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 10/29/2017

Application Dated: 10/29/2017
Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Fiber Gateway 4x4
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.117  
CC MO 15E 5190.0  -  5230.0 0.059  
CC MO 15E 5210.0  -  5210.0 0.047  
CC MO 15E 5745.0  -  5825.0 0.766  
CC MO 15E 5755.0  -  5795.0 0.976  
CC MO 15E 5775.0  -  5775.0 0.863  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application BFYPjiSL1/6mcjc2FEx5DQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
  Date of Grant: 10/29/2017

Application Dated: 10/29/2017
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Fiber Gateway 4x4
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.117  
CC MO 15E 5190.0  -  5230.0 0.059  
CC MO 15E 5210.0  -  5210.0 0.047  
CC MO 15E 5745.0  -  5825.0 0.766  
CC MO 15E 5755.0  -  5795.0 0.976  
CC MO 15E 5775.0  -  5775.0 0.863  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz, 40 MHz and 80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application /86P6zig3/Ttc47DA/qSzQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Intertek Testing Services NA, Inc.
70 Codman Hill Road
Boxborough, MA 01719
Date of Grant: 10/28/2017

Application Dated: 10/28/2017
Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Digital Transmission System
Notes: Fiber Gateway 4x4
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.994  
CC MO 15C 2422.0  -  2452.0 0.717  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application /86P6zig3/Ttc47DA/qSzQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Altice Labs, S.A.
Rua Eng Jose Ferreira Pinto Basto
Aveiro, 3810-106
Portugal
  Date of Grant: 10/28/2017

Application Dated: 10/28/2017
 
Attention: Ricardo Cunha , Telecom Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACJF-FGW-GR240BG
Name of Grantee:  Altice Labs, S.A.
Equipment Class: Digital Transmission System
Notes: Fiber Gateway 4x4
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.994  
CC MO 15C 2422.0  -  2452.0 0.717  

Power Output listed is the maximum combined conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 21 cm from all persons and not be co-located with any other antenna or transmitter except as described in this filing or in accordance with FCC multi-transmitter product procedures. Only those antennas were tested or similar antennas having the same or less gain may be used with these transmitters. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: