FCC ID 2AFTLSS1
Digital Transmission System
by ecoVent Corp.
Grantee Code: 2AFTL Product Code: SS1
Latest application date: 2015-12-15
FCC ID Device Details
| FCC ID | 2AFTLSS1 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AFTL |
| Product Code | SS1 |
| Applicant Business | ecoVent Corp. 🇺🇸 |
| Related Domains |  ecoventsystems.com |
| Equipment Class | Digital Transmission System |
| Test Firm | BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 904-926 MHz | Class II permissive change or modification of presently authorized equipment | 2015-12-15 |
| 915 MHz | Original Equipment | 2015-11-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Ecovent Manual (Draft only).pdf | Users Manual | 2016-05-11 | PDF 4.1 MB |
| Internal Photo (Wall Sensor) - updated.pdf | Internal Photos | 2016-05-11 | PDF 846.8 KB |
| External photo 2 - Modification Photo (Wall Sensor).pdf | External Photos | 2016-05-11 | PDF 211.1 KB |
| External photos 1 - Wall Sensor.pdf | External Photos | 2016-05-11 | PDF 1.1 MB |
| ecoVent Labels Dimension Location and Material.pdf | ID Label/Location Info | 2015-11-13 | PDF 298.7 KB |
| Test Set up photo.pdf | Test Setup Photos | 2016-06-12 | PDF 527.5 KB |
| Test Set Up Photo - Wall Sensor.pdf | Test Setup Photos | 2016-05-11 | PDF 604.1 KB |
| Test Report.pdf | Test Report | 2015-12-15 | PDF 635.2 KB |
| Test Report 1 - (Wall Sensor - 915 MHz) (FCC only) - Updated Nov 10.pdf | Test Report | 2015-11-13 | PDF 669.9 KB |
| Test Report 2 - (Wall Sensor 2400 MHz) (FCC Only) (updated Nov 10, 2015).pdf | Test Report | 2015-11-13 | PDF 744.8 KB |
| Cover letter_C2PC Application Cover Letter.pdf | Cover Letter(s) | 2015-12-15 | PDF 25.6 KB |
| Request for Confidentiality.pdf | Cover Letter(s) | 2015-12-15 | PDF 505.5 KB |
| Cover Letter of Agency for FCC.pdf | Cover Letter(s) | 2015-11-13 | PDF 483.1 KB |
| Request for Confidentiality for FCC.pdf | Cover Letter(s) | 2015-11-13 | PDF 509.6 KB |
| RF exposure_MPE prediction calculation - EP2231-1 - Wall Sensor (915 MHz) combin | RF Exposure Info | 2015-11-13 | PDF 177.1 KB |
| Block Diagram - Wall Sensor.pdf Metadata only | Block Diagram | PDF 162.5 KB | |
| Wall Sensor Schematics.pdf Metadata only | Schematics | PDF 199.4 KB | |
| Operational Description 1 - Wall Sensor - Technical.pdf Metadata only | Operational Description | PDF 315.7 KB | |
| Operational description 2 - Antenna Spec for Wall Sensor (915MHz).pdf Metadata only | Operational Description | PDF 241.2 KB | |
| Operational description 3 - 2.4GHz antenna spec.pdf Metadata only | Operational Description | PDF 1.9 MB |
Application Information
| Application ID | 8H+4mZKvvSTbRFY9k3DYSQ== |
|---|---|
| Final Action Date | 2015-12-15 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024870743 |
| Model | SS1 |
| Frequency Range | 904-926 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Digital Transmission System |
| Responsible Party | Robert Kim, Director of Electrical Engineering, rob@ecoventsystems.com , 8572044466 |
| Agent | Christopher Christopher Christopher, Curtis-Straus LLC |
| Test Firm | Dori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com  , 978 486 8880 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 06/12/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8H+4mZKvvSTbRFY9k3DYSQ== | 2015-12-15 | Class II permissive change or modification of presently authorized equipment |
| /LjAFHSG3eehJG0PfViHJA== | 2015-11-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application 8H+4mZKvvSTbRFY9k3DYSQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 12/15/2015 Application Dated: 12/15/2015 |
| ecoVent Corp. |
| 24 Cambridge St |
| Suite 6 |
| Charlestown, MA 02129 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSS1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 20 | 15C | 904.0 - 926.0 | 0.0029992 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application 8H+4mZKvvSTbRFY9k3DYSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ecoVent Corp. 24 Cambridge St Suite 6 Charlestown, MA 02129 United States |
Date of Grant: 12/15/2015 Application Dated: 12/15/2015 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSS1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 20 | 15C | 904.0 - 926.0 | 0.0029992 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20cm from all persons and must be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. Class II Permissive change as described in this filing. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 11/13/2015 Application Dated: 11/13/2015 |
| ecoVent Corp. |
| 24 Cambridge St |
| Suite 6 |
| Charlestown, MA 02129 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSS1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 20 | 15C | 915.0 - 915.0 | 0.0030903 | ||
| 19 20 | 15C | 2402.0 - 2480.0 | 0.0000079 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application /LjAFHSG3eehJG0PfViHJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ecoVent Corp. 24 Cambridge St Suite 6 Charlestown, MA 02129 United States |
Date of Grant: 11/13/2015 Application Dated: 11/13/2015 |
| Attention: Robert Kim , Director of Electrical Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AFTLSS1 |
| Name of Grantee: | ecoVent Corp. |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transmission System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 19 20 | 15C | 915.0 - 915.0 | 0.0030903 | ||
| 19 20 | 15C | 2402.0 - 2480.0 | 0.0000079 |
| Output power listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with installation and operating instructions for satisfying RF exposure compliance requirements. |
| 19: | This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |