FCC ID 2AH25T5921

Wireless data POS System

by Shanghai Sunmi Technology Co.,Ltd.

Grantee Code: 2AH25   Product Code: T5921
Latest application date: 2019-01-24

FCC ID Device Details

FCC ID2AH25T5921
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AH25
Product CodeT5921
Applicant BusinessShanghai Sunmi Technology Co.,Ltd. 🇨🇳
Related Domains sunmi.com
Equipment ClassWireless data POS System
Test FirmIndustrial Internet Innovation Center (Shanghai)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
13.56 MHzOriginal Equipment2019-01-24
2402-2480 MHzOriginal Equipment2019-01-24
706.5-713.5 MHzOriginal Equipment2019-01-24
5180-5240 MHzOriginal Equipment2019-01-24
2402-2480 MHzOriginal Equipment2019-01-24

Exhibits

DocumentTypeAvailableFile
UMUsers Manual2019-01-24PDF 1 MB
I18D00233 Internal PhotoInternal Photos2019-01-24PDF 2.4 MB
I18D00233 External PhotoExternal Photos2019-01-24PDF 1.8 MB
labelID Label/Location Info2019-01-24PDF 896 KB
BL-SZ18C0348-ASTest Setup Photos2019-01-24PDF 2 MB
I18D00233 PHOTOTest Setup Photos2019-01-24PDF 402.9 KB
PART 15B setup photoTest Setup Photos2019-01-24PDF 326.1 KB
PART 15C setup photoTest Setup Photos2019-01-24PDF 531.6 KB
licensed setup photoTest Setup Photos2019-01-24PDF 434.1 KB
BL-SZ18C0348-701 FCC SAR test reportRF Exposure Info2019-01-24PDF 3.7 MB
I18D00233-EMC01Test Report2019-01-24PDF 551.4 KB
I18D00233-EMC04-V01Test Report2019-01-24PDF 893 KB
I18D00233-SRD01-BTTest Report2019-01-24PDF 4.2 MB
I18D00233-SRD02-BLETest Report2019-01-24PDF 1.5 MB
I18D00233-SRD03-2.4G WLANTest Report2019-01-24PDF 3.8 MB
I18D00233-SRD04-2G 3G-1Test Report2019-01-24PDF 5.4 MB
I18D00233-SRD04-2G 3G-2Test Report2019-01-24PDF 1.8 MB
I18D00233-SRD05-V01-CDMATest Report2019-01-24PDF 2.1 MB
I18D00233-SRD06-LTETest Report2019-01-24PDF 2.8 MB
I18D00233-SRD07-5G WLANTest Report2019-01-24PDF 1.8 MB
I18D00233-SRD08-V01-5.8G WLANTest Report2019-01-24PDF 2.1 MB
Conf-letter-sample_long-short-term_71120Cover Letter(s)2019-01-24PDF 143.1 KB
DTS-NII declaration letterCover Letter(s)2019-01-24PDF 155.2 KB
POA_Letter_140225Cover Letter(s)2019-01-24PDF 25.8 KB
CALIBRATION REPORTRF Exposure Info2019-01-24PDF 4.6 MB
I18D00233-SAR01-V01-1RF Exposure Info2019-01-24PDF 2.4 MB
I18D00233-SAR01-V01-2RF Exposure Info2019-01-24PDF 5.2 MB
I18D00233-SAR01-V01-3RF Exposure Info2019-01-24PDF 5.4 MB
I18D00233-SAR01-V01-4RF Exposure Info2019-01-24PDF 2.4 MB
I18D00233-SAR01-V01-4RF Exposure Info2019-01-24PDF 168.2 KB
I18D00233-SAR01-V01-4.pdfRF Exposure Info2019-01-24PDF 168.2 KB
SATIMO Dipole Measurement ReportRF Exposure Info2019-01-24PDF 2.8 MB
QP1665_Block Diagram Metadata onlyBlock DiagramPDF 372.7 KB
QP1665_SCH Metadata onlySchematicsPDF 475.6 KB
DTS-NII declaration letter Metadata onlyOperational DescriptionPDF 155.2 KB
OP-V1 Metadata onlyOperational DescriptionPDF 448.4 KB
antenna spec Metadata onlyOperational DescriptionPDF 350.4 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 248.1 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 185 KB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 13.3 KB

Application Information

Application IDywHqBJ9tznpJ28+UQKAAMg==
Final Action Date2019-01-24
Application PurposeOriginal Equipment
Applicant FRN0025501644
ModelT5921
Frequency Range13.56 MHz
Equipment ClassDXX - Part 15 Low Power Communication Device Transmitter
Device DescriptionWireless data POS System
Responsible PartyFang Lu, Certification Engineer, fang.lu@sunmi.com , +8618501703215
AgentAnlu Anlu Anlu, East China Institute of Telecommunications, yuanlu@ecit.org.cn , 86-21-63843300
Technical ContactAnlu YU, East China Institute of Telecommunications, yuanlu@ecit.org.cn , 86-21-63843300
Test FirmZheng Zhongbin, Industrial Internet Innovation Center (Shanghai), zhangyu@3in.org , 86-21-63843300
TCB Emailtei@timcoengr.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device contains Bluetooth, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.

Applications

Application IDDatePurpose
ywHqBJ9tznpJ28+UQKAAMg==2019-01-24Original Equipment
wprhKrLoorbA/rOZkuqPjA==2019-01-24Original Equipment
nn7kK66nPY96yoDbnGY9nw==2019-01-24Original Equipment
RCnG6cah6m/alhMJIOB2DA==2019-01-24Original Equipment
IkfVcERejWy6tFVrpVGnZw==2019-01-24Original Equipment
Ewc4MXu5E1bE1SvKNbJY/A==2019-01-24Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
13.56 MHz15CCC
706.5-713.5 MHz0.0660.1ppm4M47G7D27
706.5-713.5 MHz0.0660.1ppm4M50W7D27
709-711 MHz0.0640.1ppm8M94G7D27
709-711 MHz0.0640.1ppm8M94W7D27
824.7-848.31 MHz0.1790.1ppm1M28F9W22H
826.4-846.6 MHz0.1240.1ppm4M14F9W22H
1712.4-1752.6 MHz0.4090.1ppm4M14F9W27
1712.5-1752.5 MHz0.4070.1ppm4M52W7D27
1720-1745 MHz0.3990.1ppm17M9G7D27
1720-1745 MHz0.3990.1ppm17M9W7D27
1850.2-1909.8 MHz2.0140.1ppm250KGXW24E
1850.2-1909.8 MHz0.9590.1ppm247KG7W24E
1851.25-1908.75 MHz0.4780.1ppm1M28F9W24E
1852.4-1907.6 MHz0.4630.1ppm4M14F9W24E
1852.5-1907.5 MHz0.4230.1ppm4M50W7D24E
1860-1900 MHz0.4560.1ppm17M8G7D24E
1860-1900 MHz0.3970.1ppm17M9W7D24E
2402-2480 MHz0.0007615CCC
2402-2480 MHz0.006610015CCC
2412-2462 MHz0.44615CCC
2507.5-2562.5 MHz0.5190.1ppm13M5G7D27
2507.5-2562.5 MHz0.5270.1ppm13M5W7D27
2510-2560 MHz0.5130.1ppm17M8G7D27
2510-2560 MHz0.4890.1ppm17M9W7D27
5180-5240 MHz0.03515ECC
5745-5825 MHz0.03215ECC

Grants

TCB Grant - Application ywHqBJ9tznpJ28+UQKAAMg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

This device contains Bluetooth, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ywHqBJ9tznpJ28+UQKAAMg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 13.56  -  13.56  

This device contains Bluetooth, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application wprhKrLoorbA/rOZkuqPjA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00661  

Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains NFC, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wprhKrLoorbA/rOZkuqPjA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00661  

Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device contains NFC, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application RCnG6cah6m/alhMJIOB2DA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC 15E 5745.0  -  5825.0 0.032  

Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are <0.10 W/kg, <0.10 W/kg and 1.40 W/kg, respectively.

This device has a 20 MHz and 40 MHz bandwidth mode.

This device contains NFC, Bluetooth, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application RCnG6cah6m/alhMJIOB2DA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.035  
CC 15E 5745.0  -  5825.0 0.032  

Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are <0.10 W/kg, <0.10 W/kg and 1.40 W/kg, respectively.

This device has a 20 MHz and 40 MHz bandwidth mode.

This device contains NFC, Bluetooth, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application nn7kK66nPY96yoDbnGY9nw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.578 0.1  PM 247KGXW
22H 824.2  -  848.8 0.409 0.1  PM 247KG7W
24E 1850.2  -  1909.8 2.014 0.1  PM 250KGXW
24E 1850.2  -  1909.8 0.959 0.1  PM 247KG7W
22H 824.7  -  848.31 0.179 0.1  PM 1M28F9W
24E 1851.25  -  1908.75 0.478 0.1  PM 1M28F9W
24E 1852.4  -  1907.6 0.463 0.1  PM 4M14F9W
27 1712.4  -  1752.6 0.409 0.1  PM 4M14F9W
22H 826.4  -  846.6 0.124 0.1  PM 4M14F9W
24E 1860.0  -  1900.0 0.456 0.1  PM 17M8G7D
24E 1852.5  -  1907.5 0.423 0.1  PM 4M50W7D
27 1720.0  -  1745.0 0.399 0.1  PM 17M9G7D
27 1712.5  -  1752.5 0.407 0.1  PM 4M52W7D
27 1720.0  -  1745.0 0.399 0.1  PM 17M9W7D
27 2507.5  -  2562.5 0.519 0.1  PM 13M5G7D
27 2510.0  -  2560.0 0.513 0.1  PM 17M8G7D
27 2507.5  -  2562.5 0.527 0.1  PM 13M5W7D
27 2510.0  -  2560.0 0.489 0.1  PM 17M9W7D
27 706.5  -  713.5 0.066 0.1  PM 4M47G7D
27 709.0  -  711.0 0.064 0.1  PM 8M94G7D
27 706.5  -  713.5 0.066 0.1  PM 4M50W7D
27 709.0  -  711.0 0.064 0.1  PM 8M94W7D
24E 1860.0  -  1900.0 0.397 0.1  PM 17M9W7D

Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are 1.36 W/kg, 1.53 W/kg and 1.40 W/kg, respectively.

This device contains GSM/CDMA/WCDMA/LTE functions that are not operational in U.S. Territories.

This device contains NFC, Bluetooth, BLE and WLAN transmitters.


EAS Grant - Application nn7kK66nPY96yoDbnGY9nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: PCS Licensed Transmitter
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.578 0.1  PM 247KGXW
22H 824.2  -  848.8 0.409 0.1  PM 247KG7W
24E 1850.2  -  1909.8 2.014 0.1  PM 250KGXW
24E 1850.2  -  1909.8 0.959 0.1  PM 247KG7W
22H 824.7  -  848.31 0.179 0.1  PM 1M28F9W
24E 1851.25  -  1908.75 0.478 0.1  PM 1M28F9W
24E 1852.4  -  1907.6 0.463 0.1  PM 4M14F9W
27 1712.4  -  1752.6 0.409 0.1  PM 4M14F9W
22H 826.4  -  846.6 0.124 0.1  PM 4M14F9W
24E 1860.0  -  1900.0 0.456 0.1  PM 17M8G7D
24E 1852.5  -  1907.5 0.423 0.1  PM 4M50W7D
27 1720.0  -  1745.0 0.399 0.1  PM 17M9G7D
27 1712.5  -  1752.5 0.407 0.1  PM 4M52W7D
27 1720.0  -  1745.0 0.399 0.1  PM 17M9W7D
27 2507.5  -  2562.5 0.519 0.1  PM 13M5G7D
27 2510.0  -  2560.0 0.513 0.1  PM 17M8G7D
27 2507.5  -  2562.5 0.527 0.1  PM 13M5W7D
27 2510.0  -  2560.0 0.489 0.1  PM 17M9W7D
27 706.5  -  713.5 0.066 0.1  PM 4M47G7D
27 709.0  -  711.0 0.064 0.1  PM 8M94G7D
27 706.5  -  713.5 0.066 0.1  PM 4M50W7D
27 709.0  -  711.0 0.064 0.1  PM 8M94W7D
24E 1860.0  -  1900.0 0.397 0.1  PM 17M9W7D

Output power listed is ERP for operations below 1 GHz and EIRP for operations above 1 GHz. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are 1.36 W/kg, 1.53 W/kg and 1.40 W/kg, respectively.

This device contains GSM/CDMA/WCDMA/LTE functions that are not operational in U.S. Territories.

This device contains NFC, Bluetooth, BLE and WLAN transmitters.



TCB Grant - Application IkfVcERejWy6tFVrpVGnZw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00076  
CC 15C 2412.0  -  2462.0 0.446  

Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are 0.17 W/kg, 0.12 W/kg and 1.40 W/kg, respectively.

This device has a 20 MHz and 40 MHz bandwidth mode.

This device contains NFC, Bluetooth, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IkfVcERejWy6tFVrpVGnZw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00076  
CC 15C 2412.0  -  2462.0 0.446  

Power Output is conducted. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and which provide at least 5 mm separation between the device and the users body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. The highest reported SAR values for body-worn accessory, extremity (hand) exposure and simultaneous transmission conditions are 0.17 W/kg, 0.12 W/kg and 1.40 W/kg, respectively.

This device has a 20 MHz and 40 MHz bandwidth mode.

This device contains NFC, Bluetooth, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Ewc4MXu5E1bE1SvKNbJY/A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/24/2019

Application Dated: 01/24/2019
Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road,
Yang Pu District, Shanghai, China
Shanghai, 200433
China
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wireless data POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

This device contains NFC, Bluetooth, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Ewc4MXu5E1bE1SvKNbJY/A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shanghai Sunmi Technology Co.,Ltd.
Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China
Shanghai, 200433
China
  Date of Grant: 01/24/2019

Application Dated: 01/24/2019
 
Attention: Fang Lu , Certification Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AH25T5921
Name of Grantee:  Shanghai Sunmi Technology Co.,Ltd.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Wireless data POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 

This device contains NFC, Bluetooth, BLE, WLAN, GSM, CDMA, WCDMA and LTE transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: