FCC ID 2AH25T6900
T6900
by Shanghai Sunmi Technology Co.,Ltd.
Grantee Code: 2AH25 Product Code: T6900
Latest application date: 2022-03-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 706.5-713.5 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 734-746 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 13.56 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2022-03-07 |
| 2402-2480 MHz | Original Equipment | 2019-09-05 |
| 5180-5240 MHz | Original Equipment | 2019-09-05 |
| 2402-2480 MHz | Original Equipment | 2019-09-05 |
| 13.56 MHz | Original Equipment | 2019-09-05 |
| 706.5-713.5 MHz | Original Equipment | 2019-09-05 |
| 734-746 MHz | Original Equipment | 2019-09-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2019-09-05 | PDF 1,017.9 KB |
| Internal_Photos | Internal Photos | 2022-03-07 | PDF 3 MB |
| internal photos | Internal Photos | 2019-09-05 | PDF 796 KB |
| external photos | External Photos | 2019-09-05 | PDF 718.9 KB |
| label | ID Label/Location Info | 2019-09-05 | PDF 936.3 KB |
| Test_Setup_Photos | Test Setup Photos | 2022-03-07 | PDF 1.7 MB |
| Test_Setup_Photos | Test Setup Photos | 2022-03-07 | PDF 1.5 MB |
| Test_Setup_Photos | Test Setup Photos | 2022-03-07 | PDF 1.2 MB |
| test setup photos | Test Setup Photos | 2019-09-05 | PDF 431.6 KB |
| test setup photos | Test Setup Photos | 2019-09-05 | PDF 282.2 KB |
| test setup photos | Test Setup Photos | 2019-09-05 | PDF 703.5 KB |
| test setup photos | Test Setup Photos | 2019-09-05 | PDF 464.7 KB |
| test setup photos SAR | Test Setup Photos | 2019-09-05 | PDF 318.5 KB |
| test setup photso SAR | Test Setup Photos | 2019-09-05 | PDF 318.5 KB |
| BLE_Test_Report | Test Report | 2022-03-07 | PDF 816.1 KB |
| BT_Test_Report | Test Report | 2022-03-07 | PDF 826 KB |
| Test_Report | Test Report | 2022-03-07 | PDF 1.2 MB |
| Test_Report | Test Report | 2022-03-07 | PDF 1.3 MB |
| Test_Report_2a3G | Test Report | 2022-03-07 | PDF 501.7 KB |
| Test_Report_LTE | Test Report | 2022-03-07 | PDF 400.8 KB |
| WLAN_Test_Report | Test Report | 2022-03-07 | PDF 935.7 KB |
| test report | Test Report | 2019-09-05 | PDF 586.8 KB |
| test report | Test Report | 2019-09-05 | PDF 2.5 MB |
| test report | Test Report | 2019-09-05 | PDF 624.7 KB |
| test report 2G&3G | Test Report | 2019-09-05 | PDF 2.6 MB |
| test report 5.8G | Test Report | 2019-09-05 | PDF 2 MB |
| test report 5G | Test Report | 2019-09-05 | PDF 3.4 MB |
| test report BLE | Test Report | 2019-09-05 | PDF 1.8 MB |
| test report DFS | Test Report | 2019-09-05 | PDF 777.9 KB |
| test report LTE | Test Report | 2019-09-05 | PDF 4 MB |
| test report SAR 1 | RF Exposure Info | 2019-09-05 | PDF 3.7 MB |
| test report SAR 2 | Test Report | 2019-09-05 | PDF 5.3 MB |
| test report SAR 3 | Test Report | 2019-09-05 | PDF 5.4 MB |
| test report SAR 4 | Test Report | 2019-09-05 | PDF 3.7 MB |
| test report SAR 5 | Test Report | 2019-09-05 | PDF 351.4 KB |
| test report WLAN | Test Report | 2019-09-05 | PDF 3.6 MB |
| C2PC_request_letter | Cover Letter(s) | 2022-03-07 | PDF 187.4 KB |
| Product_change_description | Cover Letter(s) | 2022-03-07 | PDF 198.4 KB |
| confidentiality_request_letter | Cover Letter(s) | 2022-03-07 | PDF 145.2 KB |
| NII declaration letter | Cover Letter(s) | 2019-09-05 | PDF 168.5 KB |
| POA | Cover Letter(s) | 2019-09-05 | PDF 10.7 KB |
| confidentiality request letter | Cover Letter(s) | 2019-09-05 | PDF 87.3 KB |
| model difference cover letter | Cover Letter(s) | 2019-09-05 | PDF 12.7 KB |
| model difference declaration letter | Cover Letter(s) | 2019-09-05 | PDF 12.7 KB |
| model difference delaration letter | Cover Letter(s) | 2019-09-05 | PDF 12.7 KB |
| poa | Cover Letter(s) | 2019-09-05 | PDF 10.7 KB |
| SAR_Test_Report_1 | RF Exposure Info | 2022-03-07 | PDF 3.6 MB |
| SAR_Test_Report_2 | RF Exposure Info | 2022-03-07 | PDF 4.5 MB |
| Block_Diagram Metadata only | Block Diagram | PDF 117.3 KB | |
| block diagram Metadata only | Block Diagram | PDF 34.7 KB | |
| Schematics Metadata only | Schematics | PDF 1.3 MB | |
| schematics Metadata only | Schematics | PDF 800.2 KB | |
| operation description Metadata only | Operational Description | PDF 113.8 KB | |
| software security info. Metadata only | SDR Software/Security Inf | PDF 311.7 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 390.4 KB | |
| Bill_of_Material Metadata only | Parts List/Tune Up Info | PDF 128.1 KB | |
| Tune_up Metadata only | Parts List/Tune Up Info | PDF 164.4 KB | |
| tune up procedure Metadata only | Parts List/Tune Up Info | PDF 164.4 KB |
Application Information
| Application ID | ycb0SF1rr5ToZ5BBAo77Cg== |
|---|---|
| Final Action Date | 2022-03-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0025501644 |
| Model | T6900 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | T6900 |
| Responsible Party | Fang Lu, Certification Engineer, fang.lu@sunmi.com  , +8618501703215 |
| Test Firm | Zheng Zhongbin, Industrial Internet Innovation Center (Shanghai), zhangyu@3in.org  , 86-21-63843300 |
| TCB Email | p.graef@kl-certification.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ycb0SF1rr5ToZ5BBAo77Cg== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| oNBwgXZQS4h5nmoL0lFcTA== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| he/PlK3R1ecAaqFTCA/qqA== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| h2jalNrbrlY3OREiEi3VIQ== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| gQbM2CTx6GACH6IH9jmjcA== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| TLGR3zahu/1GAs1Vsr6lNQ== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| Jx1+awmX3lB/7xwWaotFVQ== | 2022-03-07 | Class II permissive change or modification of presently authorized equipment |
| k1jKSC+NWcS9gbWMXclPtg== | 2019-09-05 | Original Equipment |
| VXFHDWka6C6oLIFLIn6oFA== | 2019-09-05 | Original Equipment |
| NoDLLWZPldgp5PRdKHEvdg== | 2019-09-05 | Original Equipment |
| BQ+M3TSa/fus7+C2VCE8xQ== | 2019-09-05 | Original Equipment |
| 6l8nEQlsw5vrRb2q9lJsCg== | 2019-09-05 | Original Equipment |
| 1vRRiu/y/ffNPCgf8mJYug== | 2019-09-05 | Original Equipment |
| 0Hj1nIR1fxUZwIyFv72xpA== | 2019-09-05 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 15B | CC | ||||
| 13.56 MHz | 15C | CC | |||
| 706.5-713.5 MHz | 0.086 | 0.1ppm | 4M50W7D | 27 | |
| 709-711 MHz | 0.085 | 0.1ppm | 8M99G7D | 27 | |
| 709-711 MHz | 0.084 | 0.1ppm | 8M99W7D | 27 | |
| 734-746 MHz | 15B | CC | |||
| 824.7-848.3 MHz | 0.134 | 0.1ppm | 1M09G7D | 27 | |
| 824.7-848.3 MHz | 0.118 | 0.1ppm | 1M09W7D | 22H | |
| 826.4-846.6 MHz | 0.13 | 0.1ppm | 4M19F9W | 22H | |
| 829-844 MHz | 0.124 | 0.1ppm | 8M99G7D | 22H | |
| 829-844 MHz | 0.111 | 0.1ppm | 8M99W7D | 22H | |
| 869.2-893.8 MHz | 15B | CC | |||
| 871.4-891.6 MHz | 15B | CC | |||
| 1712.4-1752.6 MHz | 0.179 | 0.1ppm | 4M19F9W | 27 | |
| 1717.5-1747.5 MHz | 0.161 | 0.1ppm | 13M4G7D | 27 | |
| 1717.5-1747.5 MHz | 0.16 | 0.1ppm | 13M5W7D | 27 | |
| 1720-1745 MHz | 0.157 | 0.1ppm | 18M0G7D | 27 | |
| 1720-1745 MHz | 0.157 | 0.1ppm | 18M0W7D | 27 | |
| 1850.2-1909.8 MHz | 1.072 | 0.1ppm | 244KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.55 | 0.1ppm | 246KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.257 | 0.1ppm | 4M18F9W | 24E | |
| 1857.5-1902.5 MHz | 0.123 | 0.1ppm | 13M5W7D | 24E | |
| 1860-1900 MHz | 0.12 | 0.1ppm | 18M0W7D | 24E | |
| 1860-1900 MHz | 0.124 | 0.1ppm | 18M1G7D | 24E | |
| 2402-2480 MHz | 0.002 | 15C | CC | ||
| 2402-2480 MHz | 0.0040000 | 15C | CC | ||
| 2412-2462 MHz | 0.065 | 15C | CC | ||
| 2502.5-2567.5 MHz | 0.084 | 0.1ppm | 4M50G7D | 27 | |
| 2507.5-2562.5 MHz | 0.08 | 0.1ppm | 13M5W7D | 27 | |
| 2510-2560 MHz | 0.078 | 0.1ppm | 18M0G7D | 27 | |
| 2510-2560 MHz | 0.078 | 0.1ppm | 18M0W7D | 27 | |
| 2542.5-2647.5 MHz | 0.102 | 0.1ppm | 13M5G7D | 27 | |
| 2542.5-2647.5 MHz | 0.103 | 0.1ppm | 13M6W7D | 27 | |
| 2545-2645 MHz | 0.1 | 0.1ppm | 18M0G7D | 27 | |
| 2545-2645 MHz | 0.101 | 0.1ppm | 18M0W7D | 27 | |
| 5180-5240 MHz | 0.022 | 0.1ppm | 15E | CC | |
| 5260-5320 MHz | 0.1ppm | 15E | CC | ||
| 5260-5320 MHz | 0.02 | 0.1ppm | 15E | CC | |
| 5745-5825 MHz | 0.1ppm | 15E | CC | ||
| 5745-5825 MHz | 0.023 | 0.1ppm | 15E | CC |
Grants
TCB Grant - Application ycb0SF1rr5ToZ5BBAo77Cg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Output Power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ycb0SF1rr5ToZ5BBAo77Cg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Output Power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.022 | 0.1 PM | |
| CC | 15E | 5260.0 - 5320.0 | 0.02 | 0.1 PM | |
| CC | 15E | 5745.0 - 5825.0 | 0.023 | 0.1 PM |
| Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.39.26 W/kg, 1.43 W/kg, and 0.32W/kg, respectively. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application VXFHDWka6C6oLIFLIn6oFA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.022 | 0.1 PM | |
| CC | 15E | 5260.0 - 5320.0 | 0.02 | 0.1 PM | |
| CC | 15E | 5745.0 - 5825.0 | 0.023 | 0.1 PM |
| Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.39.26 W/kg, 1.43 W/kg, and 0.32W/kg, respectively. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application TLGR3zahu/1GAs1Vsr6lNQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.065 |
| Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.36 W/kg, 1.43 W/kg, and 0.32 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application oNBwgXZQS4h5nmoL0lFcTA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.065 |
| Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.36 W/kg, 1.43 W/kg, and 0.32 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Output Power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application NoDLLWZPldgp5PRdKHEvdg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 |
| Output Power listed is conducted. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.065 |
| Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.36 W/kg, 1.43 W/kg, and 0.32 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application k1jKSC+NWcS9gbWMXclPtg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.065 |
| Output Power listed is the maximum conducted output power. SAR compliance for body-worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.36 W/kg, 1.43 W/kg, and 0.32 W/kg, respectively. This device supports 20 and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.022 | 0.1 PM | |
| CC | 15E | 5260.0 - 5320.0 | 0.1 PM | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1 PM |
| Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.39.26 W/kg, 1.43 W/kg, and 0.32W/kg, respectively. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Jx1+awmX3lB/7xwWaotFVQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.022 | 0.1 PM | |
| CC | 15E | 5260.0 - 5320.0 | 0.1 PM | ||
| CC | 15E | 5745.0 - 5825.0 | 0.1 PM |
| Output Power listed is the maximum conducted output power. SAR compliance for body- worn operating configurations is limited to belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body- worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 0.39.26 W/kg, 1.43 W/kg, and 0.32W/kg, respectively. This device supports 20 and 40 MHz modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application he/PlK3R1ecAaqFTCA/qqA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.297 | 0.1 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 1.294 | 0.1 PM | 248KG7W | |
| 24E | 1850.2 - 1909.8 | 1.072 | 0.1 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 0.55 | 0.1 PM | 246KG7W | |
| 24E | 1852.4 - 1907.6 | 0.257 | 0.1 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.179 | 0.1 PM | 4M19F9W | |
| 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M19F9W | |
| 24E | 1860.0 - 1900.0 | 0.124 | 0.1 PM | 18M1G7D | |
| 24E | 1857.5 - 1902.5 | 0.123 | 0.1 PM | 13M5W7D | |
| 24E | 1860.0 - 1900.0 | 0.12 | 0.1 PM | 18M0W7D | |
| 27 | 1717.5 - 1747.5 | 0.161 | 0.1 PM | 13M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0G7D | |
| 27 | 1717.5 - 1747.5 | 0.16 | 0.1 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0W7D | |
| 27 | 824.7 - 848.3 | 0.134 | 0.1 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.124 | 0.1 PM | 8M99G7D | |
| 22H | 824.7 - 848.3 | 0.118 | 0.1 PM | 1M09W7D | |
| 22H | 829.0 - 844.0 | 0.111 | 0.1 PM | 8M99W7D | |
| 27 | 2502.5 - 2567.5 | 0.084 | 0.1 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0G7D | |
| 27 | 2507.5 - 2562.5 | 0.08 | 0.1 PM | 13M5W7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0W7D | |
| 27 | 709.0 - 711.0 | 0.085 | 0.1 PM | 8M99G7D | |
| 27 | 706.5 - 713.5 | 0.086 | 0.1 PM | 4M50W7D | |
| 27 | 709.0 - 711.0 | 0.084 | 0.1 PM | 8M99W7D | |
| 27 | 2542.5 - 2647.5 | 0.102 | 0.1 PM | 13M5G7D | |
| 27 | 2545.0 - 2645.0 | 0.1 | 0.1 PM | 18M0G7D | |
| 27 | 2542.5 - 2647.5 | 0.103 | 0.1 PM | 13M6W7D | |
| 27 | 2545.0 - 2645.0 | 0.101 | 0.1 PM | 18M0W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 1.26 W/kg, 1.43 W/kg, and 2.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Band 17; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
EAS Grant - Application h2jalNrbrlY3OREiEi3VIQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.297 | 0.1 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 1.294 | 0.1 PM | 248KG7W | |
| 24E | 1850.2 - 1909.8 | 1.072 | 0.1 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 0.55 | 0.1 PM | 246KG7W | |
| 24E | 1852.4 - 1907.6 | 0.257 | 0.1 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.179 | 0.1 PM | 4M19F9W | |
| 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M19F9W | |
| 24E | 1860.0 - 1900.0 | 0.124 | 0.1 PM | 18M1G7D | |
| 24E | 1857.5 - 1902.5 | 0.123 | 0.1 PM | 13M5W7D | |
| 24E | 1860.0 - 1900.0 | 0.12 | 0.1 PM | 18M0W7D | |
| 27 | 1717.5 - 1747.5 | 0.161 | 0.1 PM | 13M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0G7D | |
| 27 | 1717.5 - 1747.5 | 0.16 | 0.1 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0W7D | |
| 27 | 824.7 - 848.3 | 0.134 | 0.1 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.124 | 0.1 PM | 8M99G7D | |
| 22H | 824.7 - 848.3 | 0.118 | 0.1 PM | 1M09W7D | |
| 22H | 829.0 - 844.0 | 0.111 | 0.1 PM | 8M99W7D | |
| 27 | 2502.5 - 2567.5 | 0.084 | 0.1 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0G7D | |
| 27 | 2507.5 - 2562.5 | 0.08 | 0.1 PM | 13M5W7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0W7D | |
| 27 | 709.0 - 711.0 | 0.085 | 0.1 PM | 8M99G7D | |
| 27 | 706.5 - 713.5 | 0.086 | 0.1 PM | 4M50W7D | |
| 27 | 709.0 - 711.0 | 0.084 | 0.1 PM | 8M99W7D | |
| 27 | 2542.5 - 2647.5 | 0.102 | 0.1 PM | 13M5G7D | |
| 27 | 2545.0 - 2645.0 | 0.1 | 0.1 PM | 18M0G7D | |
| 27 | 2542.5 - 2647.5 | 0.103 | 0.1 PM | 13M6W7D | |
| 27 | 2545.0 - 2645.0 | 0.101 | 0.1 PM | 18M0W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 1.26 W/kg, 1.43 W/kg, and 2.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Band 17; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
KL-Certification GmbH Heinrich-Hertz-Allee 7 St. Ingbert, 66386 Germany |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.2 - 893.8 | |||
| CC | 15B | 871.4 - 891.6 | |||
| CC | 15B | 734.0 - 746.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gQbM2CTx6GACH6IH9jmjcA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 03/07/2022 Application Dated: 03/07/2022 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.2 - 893.8 | |||
| CC | 15B | 871.4 - 891.6 | |||
| CC | 15B | 734.0 - 746.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application BQ+M3TSa/fus7+C2VCE8xQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Low Power Communication Device Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 13.56 - 13.56 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6l8nEQlsw5vrRb2q9lJsCg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.297 | 0.1 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 1.294 | 0.1 PM | 248KG7W | |
| 24E | 1850.2 - 1909.8 | 1.072 | 0.1 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 0.55 | 0.1 PM | 246KG7W | |
| 24E | 1852.4 - 1907.6 | 0.257 | 0.1 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.179 | 0.1 PM | 4M19F9W | |
| 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M19F9W | |
| 24E | 1860.0 - 1900.0 | 0.124 | 0.1 PM | 18M1G7D | |
| 24E | 1857.5 - 1902.5 | 0.123 | 0.1 PM | 13M5W7D | |
| 24E | 1860.0 - 1900.0 | 0.12 | 0.1 PM | 18M0W7D | |
| 27 | 1717.5 - 1747.5 | 0.161 | 0.1 PM | 13M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0G7D | |
| 27 | 1717.5 - 1747.5 | 0.16 | 0.1 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0W7D | |
| 27 | 824.7 - 848.3 | 0.134 | 0.1 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.124 | 0.1 PM | 8M99G7D | |
| 22H | 824.7 - 848.3 | 0.118 | 0.1 PM | 1M09W7D | |
| 22H | 829.0 - 844.0 | 0.111 | 0.1 PM | 8M99W7D | |
| 27 | 2502.5 - 2567.5 | 0.084 | 0.1 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0G7D | |
| 27 | 2507.5 - 2562.5 | 0.08 | 0.1 PM | 13M5W7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0W7D | |
| 27 | 709.0 - 711.0 | 0.085 | 0.1 PM | 8M99G7D | |
| 27 | 706.5 - 713.5 | 0.086 | 0.1 PM | 4M50W7D | |
| 27 | 709.0 - 711.0 | 0.084 | 0.1 PM | 8M99W7D | |
| 27 | 2542.5 - 2647.5 | 0.102 | 0.1 PM | 13M5G7D | |
| 27 | 2545.0 - 2645.0 | 0.1 | 0.1 PM | 18M0G7D | |
| 27 | 2542.5 - 2647.5 | 0.103 | 0.1 PM | 13M6W7D | |
| 27 | 2545.0 - 2645.0 | 0.101 | 0.1 PM | 18M0W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 1.26 W/kg, 1.43 W/kg, and 2.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Band 17; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
EAS Grant - Application 1vRRiu/y/ffNPCgf8mJYug==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.297 | 0.1 PM | 247KGXW | |
| 22H | 824.2 - 848.8 | 1.294 | 0.1 PM | 248KG7W | |
| 24E | 1850.2 - 1909.8 | 1.072 | 0.1 PM | 244KGXW | |
| 24E | 1850.2 - 1909.8 | 0.55 | 0.1 PM | 246KG7W | |
| 24E | 1852.4 - 1907.6 | 0.257 | 0.1 PM | 4M18F9W | |
| 27 | 1712.4 - 1752.6 | 0.179 | 0.1 PM | 4M19F9W | |
| 22H | 826.4 - 846.6 | 0.13 | 0.1 PM | 4M19F9W | |
| 24E | 1860.0 - 1900.0 | 0.124 | 0.1 PM | 18M1G7D | |
| 24E | 1857.5 - 1902.5 | 0.123 | 0.1 PM | 13M5W7D | |
| 24E | 1860.0 - 1900.0 | 0.12 | 0.1 PM | 18M0W7D | |
| 27 | 1717.5 - 1747.5 | 0.161 | 0.1 PM | 13M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0G7D | |
| 27 | 1717.5 - 1747.5 | 0.16 | 0.1 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.157 | 0.1 PM | 18M0W7D | |
| 27 | 824.7 - 848.3 | 0.134 | 0.1 PM | 1M09G7D | |
| 22H | 829.0 - 844.0 | 0.124 | 0.1 PM | 8M99G7D | |
| 22H | 824.7 - 848.3 | 0.118 | 0.1 PM | 1M09W7D | |
| 22H | 829.0 - 844.0 | 0.111 | 0.1 PM | 8M99W7D | |
| 27 | 2502.5 - 2567.5 | 0.084 | 0.1 PM | 4M50G7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0G7D | |
| 27 | 2507.5 - 2562.5 | 0.08 | 0.1 PM | 13M5W7D | |
| 27 | 2510.0 - 2560.0 | 0.078 | 0.1 PM | 18M0W7D | |
| 27 | 709.0 - 711.0 | 0.085 | 0.1 PM | 8M99G7D | |
| 27 | 706.5 - 713.5 | 0.086 | 0.1 PM | 4M50W7D | |
| 27 | 709.0 - 711.0 | 0.084 | 0.1 PM | 8M99W7D | |
| 27 | 2542.5 - 2647.5 | 0.102 | 0.1 PM | 13M5G7D | |
| 27 | 2545.0 - 2645.0 | 0.1 | 0.1 PM | 18M0G7D | |
| 27 | 2542.5 - 2647.5 | 0.103 | 0.1 PM | 13M6W7D | |
| 27 | 2545.0 - 2645.0 | 0.101 | 0.1 PM | 18M0W7D |
| Output Power is EIRP and ERP for above and below 1 GHz, respectively. SAR compliance for body-worn operating configurations is limited to or belt-clips and holsters that have no metallic components in the assembly and cause the device to operate with the minimum separation distance of 1.0 cm, as described in this filing. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body-worn accessory, simultaneous transmission and product specific (10g SAR) exposure conditions are 1.26 W/kg, 1.43 W/kg, and 2.59 W/kg, respectively. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2 and 4; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 5; LTE of 5, and 10 MHz bandwidth modes for FDD LTE Band 17; and LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Shanghai Sunmi Technology Co.,Ltd. |
| Room 505, KIC Plaza, No.388 Song Hu Road, |
| Yang Pu District, Shanghai, China |
| Shanghai, 200433 China |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | T6900 |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.2 - 893.8 | |||
| CC | 15B | 871.4 - 891.6 | |||
| CC | 15B | 734.0 - 746.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0Hj1nIR1fxUZwIyFv72xpA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shanghai Sunmi Technology Co.,Ltd. Room 505, KIC Plaza, No.388 Song Hu Road, Yang Pu District, Shanghai, China Shanghai, 200433 China |
Date of Grant: 09/05/2019 Application Dated: 09/05/2019 |
| Attention: Fang Lu , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AH25T6900 |
| Name of Grantee: | Shanghai Sunmi Technology Co.,Ltd. |
| Equipment Class: | Communications Rcvr for use w/ licensed Tx and CBs |
| Notes: | T6900 |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | 869.2 - 893.8 | |||
| CC | 15B | 871.4 - 891.6 | |||
| CC | 15B | 734.0 - 746.0 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |