FCC ID 2AJYU-8PYA008

LTE/GNSS MODULE

by SIMCom Wireless Solutions Limited

Grantee Code: 2AJYU   Product Code: 8PYA008
Latest application date: 2021-12-09

FCC ID Device Details

FCC ID2AJYU-8PYA008
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AJYU
Product Code8PYA008
Applicant BusinessSIMCom Wireless Solutions Limited 🇨🇳
Related Domains simcom.com
Equipment ClassLTE/GNSS MODULE
Test FirmSHENZHEN STS TEST SERVICES CO.,LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
701.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2021-12-09
701.5-713.5 MHzOriginal Equipment2020-08-14

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2020-08-14PDF 4.2 MB
Internal_PhotosInternal Photos2020-08-14PDF 314.4 KB
Ext EUT PHOTOExternal Photos2021-12-09PDF 564.3 KB
External_PhotosExternal Photos2020-08-14PDF 864.2 KB
Label_LocationID Label/Location Info2021-12-09PDF 69.9 KB
labelID Label/Location Info2020-08-14PDF 357 KB
Test_SetupTest Setup Photos2020-08-14PDF 627.8 KB
Test ReportTest Report2021-12-09PDF 5.9 MB
TR_STS2006042W01_RF_Appendix ATest Report2020-08-14PDF 4.6 MB
TR_STS2006042W01_RF_Appendix B_Part1Test Report2020-08-14PDF 4.1 MB
TR_STS2006042W01_RF_Appendix B_Part2Test Report2020-08-14PDF 3.9 MB
TR_STS2006042W01_RF_Appendix B_Part3Test Report2020-08-14PDF 3.8 MB
TR_STS2006042W01_RF_Appendix CTest Report2020-08-14PDF 4.8 MB
TR_STS2006042W01_RF_Appendix DTest Report2020-08-14PDF 3.9 MB
TR_STS2006042W01_RF_FCC LTE_Part 22 24 27 90Test Report2020-08-14PDF 1.1 MB
Agent Authorization Rev 1.0Cover Letter(s)2021-12-09PDF 22.8 KB
Declaration of identityCover Letter(s)2021-12-09PDF 127.7 KB
FCC AuthorizationLetter for STS LabCover Letter(s)2021-12-09PDF 15.5 KB
FCC Class II PC request letter Rev1.1Cover Letter(s)2021-12-09PDF 66.6 KB
FCC_Short & Long Term Confidentiality RequestCover Letter(s)2021-12-09PDF 88 KB
Agent_Authorization_Rev_1.0Cover Letter(s)2020-08-14PDF 25.8 KB
Authorization_LetterCover Letter(s)2020-08-14PDF 78.1 KB
Differences DeclarationCover Letter(s)2020-08-14PDF 112.1 KB
FCCCoverlettersinglemodularapprovalCover Letter(s)2020-08-14PDF 316.1 KB
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s)2020-08-14PDF 61.5 KB
RF ExposureRF Exposure Info2021-12-09PDF 176 KB
RF ExposureRF Exposure Info2020-08-14PDF 154 KB
Block_diagram Metadata onlyBlock DiagramPDF 100.9 KB
SCH Metadata onlySchematicsPDF 207.2 KB
Operational-Description Metadata onlyOperational DescriptionPDF 106.9 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 102.1 KB
Tune_up_Procedure Metadata onlyParts List/Tune Up InfoPDF 67.1 KB

Application Information

Application IDs8X3m2OhmKpmTvKB5oG70w==
Final Action Date2021-12-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0031089808
Model8PYA008
Frequency Range701.5-713.5 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE/GNSS MODULE
Responsible PartyYongsheng Li, Manage, yongsheng.li@simcom.com , +86 21 3252 3134
Technical ContactSIMCom Wireless Solutions Limited, yongsheng.li@sim.com
Test FirmBovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com , +86 755-36886288
TCB Emailcertification@micomlabs.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
s8X3m2OhmKpmTvKB5oG70w==2021-12-09Class II permissive change or modification of presently authorized equipment
qspU52bGbXYLiwlip2lrcw==2020-08-14Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
701.5-713.5 MHz0.19410.051ppm4M53W7D27
701.5-713.5 MHz0.83950.051ppm4M53W7D27
704-711 MHz0.20650.051ppm8M94G7D27
704-711 MHz0.8610.051ppm8M94G7D27
779.5-784.5 MHz0.11530.049ppm4M54W7D27
779.5-784.5 MHz0.6310.049ppm4M54W7D27
782 MHz0.13240.049ppm8M96G7D27
782 MHz0.6730.049ppm8M96G7D27
816.5-821.5 MHz0.14260.021ppm4M53W7D9
816.5-821.5 MHz0.77980.021ppm4M53W7D9
819 MHz0.15140.021ppm8M92G7D9
819 MHz0.78890.021ppm8M92G7D9
826.5-846.5 MHz0.15630.021ppm4M53W7D22H
826.5-846.5 MHz0.89130.021ppm4M53W7D22H
826.5-846.5 MHz0.22590.05ppm4M53W7D22H
826.5-846.5 MHz1.1830.05ppm4M53W7D22H
829-844 MHz0.23880.05ppm8M91G7D22H
829-844 MHz1.23880.05ppm8M91G7D22H
831.5-841.5 MHz0.18070.021ppm13M5G7D22H
831.5-841.5 MHz0.93110.021ppm13M5G7D22H
1712.5-1777.5 MHz0.10890.019ppm4M53W7D27
1712.5-1777.5 MHz0.47420.019ppm4M53W7D27
1712.5-1752.5 MHz0.18280.021ppm4M53W7D27
1712.5-1752.5 MHz0.8260.021ppm4M53W7D27
1720-1770 MHz0.13840.019ppm17M9G7D27
1720-1770 MHz0.59980.019ppm17M9G7D27
1720-1745 MHz0.20.021ppm17M9G7D27
1720-1745 MHz0.85110.021ppm17M9G7D27
1852.5-1912.5 MHz0.1340.019ppm4M52W7D24E
1852.5-1912.5 MHz1.17490.019ppm4M52W7D24E
1860-1905 MHz0.15450.019ppm17M9G7D24E
1860-1905 MHz1.30320.019ppm17M9G7D24E
2498.5-2687.5 MHz0.10910.014ppm4M52W7D27
2498.5-2687.5 MHz0.96160.014ppm4M52W7D27
2506-2680 MHz0.13120.014ppm17M9G7D27
2506-2680 MHz1.14020.014ppm17M9G7D27

Grants

TCB Grant - Application s8X3m2OhmKpmTvKB5oG70w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 12/09/2021

Application Dated: 12/09/2021
SIMCom Wireless Solutions Limited
No.633 Jinzhong Road, Shanghai
Shanghai, 200335
China
 
Attention: Yongsheng Li , Manage

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJYU-8PYA008
Name of Grantee:  SIMCom Wireless Solutions Limited
Equipment Class: PCS Licensed Transmitter
Notes: LTE/GNSS MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4125 0.019  PM 17M9G7D
24E 1852.5  -  1907.5 1.3614 0.019  PM 4M53W7D
27 1720.0  -  1745.0 0.8511 0.021  PM 17M9G7D
27 1712.5  -  1752.5 0.826 0.021  PM 4M53W7D
22H 829.0  -  844.0 1.2388 0.05  PM 8M91G7D
22H 826.5  -  846.5 1.183 0.05  PM 4M53W7D
27 704.0  -  711.0 0.861 0.051  PM 8M94G7D
27 701.5  -  713.5 0.8395 0.051  PM 4M53W7D
27 782.0  -  782.0 0.673 0.049  PM 8M96G7D
27 779.5  -  784.5 0.631 0.049  PM 4M54W7D
24E 1860.0  -  1905.0 1.3032 0.019  PM 17M9G7D
24E 1852.5  -  1912.5 1.1749 0.019  PM 4M52W7D
22H 831.5  -  841.5 0.9311 0.021  PM 13M5G7D
22H 826.5  -  846.5 0.8913 0.021  PM 4M53W7D
90 819.0  -  819.0 0.7889 0.021  PM 8M92G7D
90 816.5  -  821.5 0.7798 0.021  PM 4M53W7D
27 2506.0  -  2680.0 1.1402 0.014  PM 17M9G7D
27 2498.5  -  2687.5 0.9616 0.014  PM 4M52W7D
27 1720.0  -  1770.0 0.5998 0.019  PM 17M9G7D
27 1712.5  -  1777.5 0.4742 0.019  PM 4M53W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

EAS Grant - Application s8X3m2OhmKpmTvKB5oG70w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SIMCom Wireless Solutions Limited
No.633 Jinzhong Road, Shanghai
Shanghai, 200335
China
  Date of Grant: 12/09/2021

Application Dated: 12/09/2021
 
Attention: Yongsheng Li , Manage

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJYU-8PYA008
Name of Grantee:  SIMCom Wireless Solutions Limited
Equipment Class: PCS Licensed Transmitter
Notes: LTE/GNSS MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 1.4125 0.019  PM 17M9G7D
24E 1852.5  -  1907.5 1.3614 0.019  PM 4M53W7D
27 1720.0  -  1745.0 0.8511 0.021  PM 17M9G7D
27 1712.5  -  1752.5 0.826 0.021  PM 4M53W7D
22H 829.0  -  844.0 1.2388 0.05  PM 8M91G7D
22H 826.5  -  846.5 1.183 0.05  PM 4M53W7D
27 704.0  -  711.0 0.861 0.051  PM 8M94G7D
27 701.5  -  713.5 0.8395 0.051  PM 4M53W7D
27 782.0  -  782.0 0.673 0.049  PM 8M96G7D
27 779.5  -  784.5 0.631 0.049  PM 4M54W7D
24E 1860.0  -  1905.0 1.3032 0.019  PM 17M9G7D
24E 1852.5  -  1912.5 1.1749 0.019  PM 4M52W7D
22H 831.5  -  841.5 0.9311 0.021  PM 13M5G7D
22H 826.5  -  846.5 0.8913 0.021  PM 4M53W7D
90 819.0  -  819.0 0.7889 0.021  PM 8M92G7D
90 816.5  -  821.5 0.7798 0.021  PM 4M53W7D
27 2506.0  -  2680.0 1.1402 0.014  PM 17M9G7D
27 2498.5  -  2687.5 0.9616 0.014  PM 4M52W7D
27 1720.0  -  1770.0 0.5998 0.019  PM 17M9G7D
27 1712.5  -  1777.5 0.4742 0.019  PM 4M53W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.



TCB Grant - Application qspU52bGbXYLiwlip2lrcw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 08/14/2020

Application Dated: 08/14/2020
SIMCom Wireless Solutions Limited
No.633 Jinzhong Road, Shanghai
Shanghai, 200335
China
 
Attention: Yongsheng Li , Manage

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJYU-8PYA008
Name of Grantee:  SIMCom Wireless Solutions Limited
Equipment Class: PCS Licensed Transmitter
Notes: LTE/GNSS MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.1637 0.019  PM 17M9G7D
24E 1852.5  -  1907.5 0.1542 0.019  PM 4M53W7D
27 1720.0  -  1745.0 0.2 0.021  PM 17M9G7D
27 1712.5  -  1752.5 0.1828 0.021  PM 4M53W7D
22H 829.0  -  844.0 0.2388 0.05  PM 8M91G7D
22H 826.5  -  846.5 0.2259 0.05  PM 4M53W7D
27 704.0  -  711.0 0.2065 0.051  PM 8M94G7D
27 701.5  -  713.5 0.1941 0.051  PM 4M53W7D
27 782.0  -  782.0 0.1324 0.049  PM 8M96G7D
27 779.5  -  784.5 0.1153 0.049  PM 4M54W7D
24E 1860.0  -  1905.0 0.1545 0.019  PM 17M9G7D
24E 1852.5  -  1912.5 0.134 0.019  PM 4M52W7D
22H 831.5  -  841.5 0.1807 0.021  PM 13M5G7D
22H 826.5  -  846.5 0.1563 0.021  PM 4M53W7D
90 819.0  -  819.0 0.1514 0.021  PM 8M92G7D
90 816.5  -  821.5 0.1426 0.021  PM 4M53W7D
27 2506.0  -  2680.0 0.1312 0.014  PM 17M9G7D
27 2498.5  -  2687.5 0.1091 0.014  PM 4M52W7D
27 1720.0  -  1770.0 0.1384 0.019  PM 17M9G7D
27 1712.5  -  1777.5 0.1089 0.019  PM 4M53W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

EAS Grant - Application qspU52bGbXYLiwlip2lrcw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

SIMCom Wireless Solutions Limited
No.633 Jinzhong Road, Shanghai
Shanghai, 200335
China
  Date of Grant: 08/14/2020

Application Dated: 08/14/2020
 
Attention: Yongsheng Li , Manage

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AJYU-8PYA008
Name of Grantee:  SIMCom Wireless Solutions Limited
Equipment Class: PCS Licensed Transmitter
Notes: LTE/GNSS MODULE
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
24E 1860.0  -  1900.0 0.1637 0.019  PM 17M9G7D
24E 1852.5  -  1907.5 0.1542 0.019  PM 4M53W7D
27 1720.0  -  1745.0 0.2 0.021  PM 17M9G7D
27 1712.5  -  1752.5 0.1828 0.021  PM 4M53W7D
22H 829.0  -  844.0 0.2388 0.05  PM 8M91G7D
22H 826.5  -  846.5 0.2259 0.05  PM 4M53W7D
27 704.0  -  711.0 0.2065 0.051  PM 8M94G7D
27 701.5  -  713.5 0.1941 0.051  PM 4M53W7D
27 782.0  -  782.0 0.1324 0.049  PM 8M96G7D
27 779.5  -  784.5 0.1153 0.049  PM 4M54W7D
24E 1860.0  -  1905.0 0.1545 0.019  PM 17M9G7D
24E 1852.5  -  1912.5 0.134 0.019  PM 4M52W7D
22H 831.5  -  841.5 0.1807 0.021  PM 13M5G7D
22H 826.5  -  846.5 0.1563 0.021  PM 4M53W7D
90 819.0  -  819.0 0.1514 0.021  PM 8M92G7D
90 816.5  -  821.5 0.1426 0.021  PM 4M53W7D
27 2506.0  -  2680.0 0.1312 0.014  PM 17M9G7D
27 2498.5  -  2687.5 0.1091 0.014  PM 4M52W7D
27 1720.0  -  1770.0 0.1384 0.019  PM 17M9G7D
27 1712.5  -  1777.5 0.1089 0.019  PM 4M53W7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. Single Modular Approval. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.



Mail To: