FCC ID 2AMH4SC20A
Golf Trolley
by Motocaddy Ltd.
Grantee Code: 2AMH4 Product Code: SC20A
Latest application date: 2023-06-21
FCC ID Device Details
| FCC ID | 2AMH4SC20A |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AMH4 |
| Product Code | SC20A |
| Applicant Business | Motocaddy Ltd. 🇬🇧 |
| Related Domains |  motocaddy.com  sgs.com |
| Equipment Class | Golf Trolley |
| Test Firm | SGS-CSTC Standards Technical Services Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2510-2560 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-21 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-20 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-06-20 |
| 2510-2560 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-30 |
| 5755-5795 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-29 |
| 2422-2452 MHz | Class II permissive change or modification of presently authorized equipment | 2023-05-29 |
| 5755-5795 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 | 2022-12-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 | 2022-12-16 |
| 701.5-713.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 | 2022-12-16 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 | 2022-12-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2023-06-21 | PDF 5.2 MB |
| User Manual | Users Manual | 2022-12-16 | PDF 3.8 MB |
| Internal photo | Internal Photos | 2023-06-21 | PDF 3.5 MB |
| Internal photo | Internal Photos | 2023-05-30 | PDF 890.9 KB |
| External photo | External Photos | 2023-06-21 | PDF 1.5 MB |
| External photo | External Photos | 2023-05-30 | PDF 1.3 MB |
| External photo | External Photos | 2022-12-16 | PDF 648.1 KB |
| Label | ID Label/Location Info | 2023-06-21 | PDF 442.3 KB |
| Label | ID Label/Location Info | 2022-12-16 | PDF 150.8 KB |
| Setup Photo | Test Setup Photos | 2023-05-30 | PDF 334.5 KB |
| Test report for SAR | RF Exposure Info | 2023-06-21 | PDF 2.9 MB |
| Antenna Data sheet 1 for 234G | Test Report | 2023-05-30 | PDF 921.1 KB |
| Antenna Data sheet 2 for 234G | Test Report | 2023-05-30 | PDF 938.5 KB |
| Antenna Date Sheet | Test Report | 2023-05-29 | PDF 1.6 MB |
| Test report | Test Report | 2023-05-29 | PDF 968.9 KB |
| Test report for 2.4G WiFi | Test Report | 2023-05-29 | PDF 1 MB |
| Test report for 5G WiFi | Test Report | 2023-05-29 | PDF 1.8 MB |
| Test report for BLE | Test Report | 2023-05-29 | PDF 663.9 KB |
| Test report for DFS | Test Report | 2023-05-29 | PDF 746.9 KB |
| FCC_U.S. agent Letter | Attestation Statements | 2023-06-21 | PDF 92.6 KB |
| QSF27-14-04_Rev1.0_Applicant_Declaration_Letter | Attestation Statements | 2023-06-21 | PDF 105.1 KB |
| FCC Certification US Agent | Attestation Statements | 2023-05-30 | PDF 92.6 KB |
| Auth letter | Cover Letter(s) | 2023-06-21 | PDF 239.7 KB |
| Confidentiality_FCC | Cover Letter(s) | 2023-06-21 | PDF 254.6 KB |
| FCC_Class II Permissive Change Request | Cover Letter(s) | 2023-06-21 | PDF 22.2 KB |
| MCL | Cover Letter(s) | 2023-06-21 | PDF 118.2 KB |
| Auth letter | Cover Letter(s) | 2023-05-30 | PDF 206.2 KB |
| FCC_Class II Permissive Change Request | Cover Letter(s) | 2023-05-30 | PDF 48.9 KB |
| Applicant_Declaration_Letter | Cover Letter(s) | 2022-12-16 | PDF 331.7 KB |
| Auth letter | Cover Letter(s) | 2022-12-16 | PDF 197.3 KB |
| FCC Change ID-Cover Letter 1_by orignal application | Cover Letter(s) | 2022-12-16 | PDF 379.4 KB |
| FCC Change ID-Cover Letter 2_by new application | Cover Letter(s) | 2022-12-16 | PDF 253.9 KB |
| Appendix C Calibration certificate | RF Exposure Info | 2023-06-21 | PDF 4.8 MB |
| Appendix D Photographs | RF Exposure Info | 2023-06-21 | PDF 509.3 KB |
| MPE | RF Exposure Info | 2023-05-30 | PDF 362.7 KB |
| Block diagram Metadata only | Block Diagram | PDF 204.9 KB | |
| Schematics Metadata only | Schematics | PDF 141.7 KB | |
| Operational description Metadata only | Operational Description | PDF 168.8 KB | |
| Tune up Metadata only | Parts List/Tune Up Info | PDF 54.3 KB |
Application Information
| Application ID | /0GqfYkCNjFfLHP5DD3qZQ== |
|---|---|
| Final Action Date | 2023-06-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0026604934 |
| Model | SC20A |
| Frequency Range | 2510-2560 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | Golf Trolley |
| Responsible Party | Ian Gell, Engineering and Technology Director, ian.gell@motocaddy.com , +441279712370 |
| Agent | Parlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Non-Technical Contact | Parlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666 |
| Test Firm | Kingsley Zhou, SGS-CSTC Standards Technical Services Co., Ltd., Kingsley.Zhou@sgs.com , 13636390700 |
| TCB Email | USCTS.TCB@SGS.COM |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.93 W/kg, 1.12 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz). Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| /0GqfYkCNjFfLHP5DD3qZQ== | 2023-06-21 | Class II permissive change or modification of presently authorized equipment |
| uFUnUr319CR8+wxwVa+Rxg== | 2023-06-20 | Class II permissive change or modification of presently authorized equipment |
| HqlzqPqwHyHupczIksbjBg== | 2023-06-20 | Class II permissive change or modification of presently authorized equipment |
| 0W25Ziu6ZqgW6TQ3ZZEDzg== | 2023-06-20 | Class II permissive change or modification of presently authorized equipment |
| yBf5LKt1+Hw7l18UJMmz/A== | 2023-05-30 | Class II permissive change or modification of presently authorized equipment |
| wzTe+EDW8uf/je4EPh+xfQ== | 2023-05-29 | Class II permissive change or modification of presently authorized equipment |
| I9PmxZlZBkG6nXyKau5zZg== | 2023-05-29 | Class II permissive change or modification of presently authorized equipment |
| Bq6LnEpaSkRlvY+r3kwF+A== | 2023-05-29 | Class II permissive change or modification of presently authorized equipment |
| bvhRsODZJ6mCpoNis7Sz1A== | 2022-12-16 | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 |
| IvIl0ZAsLbDst3PBlO6YPw== | 2022-12-16 | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 |
| Dxoq7SugOEkPpDcjt/HL1w== | 2022-12-16 | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 |
| B+tyXVpD/64zQHOifygzYQ== | 2022-12-16 | Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017 |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 701.5-713.5 MHz | 0.2307 | 0.0052ppm | 4M49W7D | 27 | |
| 704-711 MHz | 0.2812 | 0.0052ppm | 9M11G7D | 27 | |
| 704-711 MHz | 0.2275 | 0.0052ppm | 9M05W7D | 27 | |
| 779.5-784.5 MHz | 0.3467 | 0.0035ppm | 4M52G7D | 27 | |
| 779.5-784.5 MHz | 0.2864 | 0.0035ppm | 4M50W7D | 27 | |
| 782 MHz | 0.3311 | 0.0035ppm | 9M03G7D | 27 | |
| 782 MHz | 0.2825 | 0.0035ppm | 9M05W7D | 27 | |
| 815.5-822.5 MHz | 0.2198 | 0.0045ppm | 2M73G7D | 22H, 9 | |
| 821.5 MHz | 0.2138 | 0.0045ppm | 13M4G7D | 22H, 9 | |
| 821.5 MHz | 0.191 | 0.0045ppm | 13M4W7D | 22H, 9 | |
| 825.5-847.5 MHz | 0.2163 | 0.0044ppm | 2M72G7D | 22H | |
| 826.5-846.5 MHz | 0.2118 | 0.0061ppm | 4M50G7D | 22H | |
| 829-844 MHz | 0.2128 | 0.0044ppm | 9M03G7D | 22H | |
| 829-844 MHz | 0.2046 | 0.0044ppm | 9M03W7D | 22H | |
| 831.5-841.5 MHz | 0.2037 | 0.0061ppm | 13M5G7D | 22H | |
| 831.5-841.5 MHz | 0.2 | 0.0061ppm | 13M5W7D | 22H | |
| 1712.4-1752.6 MHz | 0.3767 | 0.0144ppm | 4M15F9W | 27 | |
| 1720-1745 MHz | 0.3811 | 0.0028ppm | 18M4G7D | 27 | |
| 1720-1745 MHz | 0.3357 | 0.0028ppm | 18M6W7D | 27 | |
| 1850.2-1909.8 MHz | 1.7579 | 0.0122ppm | 245KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.6871 | 0.0117ppm | 248KG7W | 24E | |
| 1850.7-1914.3 MHz | 0.2938 | 0.0013ppm | 1M09W7D | 24E | |
| 1852.4-1907.6 MHz | 0.3581 | 0.0213ppm | 4M15F9W | 24E | |
| 1855-1910 MHz | 0.3556 | 0.0013ppm | 8M99G7D | 24E | |
| 1857.5-1902.5 MHz | 0.3581 | 0.0021ppm | 13M5G7D | 24E | |
| 1857.5-1902.5 MHz | 0.3048 | 0.0021ppm | 13M5W7D | 24E | |
| 1860-1905 MHz | 0.3467 | 0.0013ppm | 18M2G7D | 24E | |
| 1860-1905 MHz | 0.2767 | 0.0013ppm | 18M3W7D | 24E | |
| 1860-1900 MHz | 0.3404 | 0.0021ppm | 18M3G7D | 24E | |
| 1860-1900 MHz | 0.2864 | 0.0021ppm | 18M4W7D | 24E | |
| 2402-2480 MHz | 0.0065000 | 15C | CC | ||
| 2402-2480 MHz | 0.002 | 15C | CC | ||
| 2412-2462 MHz | 0.1469 | 15C | CC | ||
| 2422-2452 MHz | 0.1626 | 15C | CC |
Grants
TCB Grant - Application yBf5LKt1+Hw7l18UJMmz/A==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 05/30/2023 Application Dated: 05/30/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz). Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
EAS Grant - Application yBf5LKt1+Hw7l18UJMmz/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 05/30/2023 Application Dated: 05/30/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz). Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 3.8dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application wzTe+EDW8uf/je4EPh+xfQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 3.8dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Golf Trolley |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 3.8dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application uFUnUr319CR8+wxwVa+Rxg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Golf Trolley |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 3.8dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application IvIl0ZAsLbDst3PBlO6YPw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application I9PmxZlZBkG6nXyKau5zZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Golf Trolley |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.01 W/kg and 1.13W/kg respectively. C2PC to added new antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application HqlzqPqwHyHupczIksbjBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Golf Trolley |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0065 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.01 W/kg and 1.13W/kg respectively. C2PC to added new antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
EAS Grant - Application Dxoq7SugOEkPpDcjt/HL1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | LTE Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application bvhRsODZJ6mCpoNis7Sz1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.024 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0199 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0246 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0209 | ||
| CC ND | 15E | 5500.0 - 5580.0 | 0.0196 | ||
| CC ND | 15E | 5660.0 - 5700.0 | 0.0207 | ||
| CC ND | 15E | 5510.0 - 5550.0 | 0.0116 | ||
| CC ND | 15E | 5670.0 - 5670.0 | 0.017 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0157 | ||
| CC | 15E | 5755.0 - 5795.0 | 0.012 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Bq6LnEpaSkRlvY+r3kwF+A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 05/29/2023 Application Dated: 05/29/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| C2PC to Added New Antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application B+tyXVpD/64zQHOifygzYQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 12/16/2022 Application Dated: 12/16/2022 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | LTE Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Golf Trolley |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0W25Ziu6ZqgW6TQ3ZZEDzg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 06/20/2023 Application Dated: 06/20/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Golf Trolley |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.1469 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.1626 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.002 |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.01 W/kg, 0.03 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 2.2dBi). Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024 |
Date of Grant: 06/21/2023 Application Dated: 06/20/2023 |
| Motocaddy Ltd. |
| Units 15 to 18, Stansted Distribution Centre |
| Start Hill Great Hallingbury |
| Hertfordshire, CM22 7DG United Kingdom |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Golf Trolley |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.93 W/kg, 1.12 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz). Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
EAS Grant - Application /0GqfYkCNjFfLHP5DD3qZQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Motocaddy Ltd. Units 15 to 18, Stansted Distribution Centre Start Hill Great Hallingbury Hertfordshire, CM22 7DG United Kingdom |
Date of Grant: 06/21/2023 Application Dated: 06/20/2023 |
| Attention: Ian Gell , Engineering and Technology Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AMH4SC20A |
| Name of Grantee: | Motocaddy Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | Golf Trolley |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 1.7865 | 0.0203 PM | 243KGXW | |
| 22H | 824.2 - 848.8 | 0.4753 | 0.043 PM | 247KG7W | |
| 22H | 826.4 - 846.6 | 0.2239 | 0.0215 PM | 4M15F9W | |
| 24E | 1850.2 - 1909.8 | 1.7579 | 0.0122 PM | 245KGXW | |
| 24E | 1850.2 - 1909.8 | 0.6871 | 0.0117 PM | 248KG7W | |
| 24E | 1852.4 - 1907.6 | 0.3581 | 0.0213 PM | 4M15F9W | |
| 27 | 1712.4 - 1752.6 | 0.3767 | 0.0144 PM | 4M15F9W | |
| 24E | 1860.0 - 1900.0 | 0.3404 | 0.0021 PM | 18M3G7D | |
| 24E | 1860.0 - 1900.0 | 0.2864 | 0.0021 PM | 18M4W7D | |
| 24E | 1857.5 - 1902.5 | 0.3581 | 0.0021 PM | 13M5G7D | |
| 24E | 1857.5 - 1902.5 | 0.3048 | 0.0021 PM | 13M5W7D | |
| 27 | 1720.0 - 1745.0 | 0.3811 | 0.0028 PM | 18M4G7D | |
| 27 | 1720.0 - 1745.0 | 0.3357 | 0.0028 PM | 18M6W7D | |
| 22H | 829.0 - 844.0 | 0.2128 | 0.0044 PM | 9M03G7D | |
| 22H | 829.0 - 844.0 | 0.2046 | 0.0044 PM | 9M03W7D | |
| 22H | 825.5 - 847.5 | 0.2163 | 0.0044 PM | 2M72G7D | |
| 27 | 2510.0 - 2560.0 | 0.5105 | 0.0009 PM | 18M5G7D | |
| 27 | 2510.0 - 2560.0 | 0.4385 | 0.0009 PM | 18M5W7D | |
| 27 | 2507.5 - 2562.5 | 0.4446 | 0.0009 PM | 13M5W7D | |
| 27 | 704.0 - 711.0 | 0.2812 | 0.0052 PM | 9M11G7D | |
| 27 | 704.0 - 711.0 | 0.2275 | 0.0052 PM | 9M05W7D | |
| 27 | 701.5 - 713.5 | 0.2307 | 0.0052 PM | 4M49W7D | |
| 27 | 782.0 - 782.0 | 0.3311 | 0.0035 PM | 9M03G7D | |
| 27 | 782.0 - 782.0 | 0.2825 | 0.0035 PM | 9M05W7D | |
| 27 | 779.5 - 784.5 | 0.3467 | 0.0035 PM | 4M52G7D | |
| 27 | 779.5 - 784.5 | 0.2864 | 0.0035 PM | 4M50W7D | |
| 24E | 1860.0 - 1905.0 | 0.3467 | 0.0013 PM | 18M2G7D | |
| 24E | 1860.0 - 1905.0 | 0.2767 | 0.0013 PM | 18M3W7D | |
| 24E | 1855.0 - 1910.0 | 0.3556 | 0.0013 PM | 8M99G7D | |
| 24E | 1850.7 - 1914.3 | 0.2938 | 0.0013 PM | 1M09W7D | |
| 22H | 831.5 - 841.5 | 0.2037 | 0.0061 PM | 13M5G7D | |
| 22H | 831.5 - 841.5 | 0.2 | 0.0061 PM | 13M5W7D | |
| 22H | 826.5 - 846.5 | 0.2118 | 0.0061 PM | 4M50G7D | |
| 90, 22H | 821.5 - 821.5 | 0.2138 | 0.0045 PM | 13M4G7D | |
| 90, 22H | 821.5 - 821.5 | 0.191 | 0.0045 PM | 13M4W7D | |
| 90, 22H | 815.5 - 822.5 | 0.2198 | 0.0045 PM | 2M73G7D |
| C2PC to integrate into specific host (Trademark: Motocaddy, Model: M5 GPS, M5 GPS DHC, M-TECH GPS). SAR testing was performed to demonstrate RF compliance. The highest reported SAR values for extremity, body and simultaneous transmission conditions are 0.93 W/kg, 1.12 W/kg and 1.15W/kg respectively. C2PC to add new antenna (Type: FPC antenna, Gain: 0.4 dBi at 700/800/850 MHz, 2.3 dBi at 1700/1900 MHz, and 2.0 dBi at 2500/2600 MHz). Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27. |
| Mail To: |