M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.

Xiamen zayata technology INC. PIll Reminder

Page 1 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 2 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 3 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 4 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 5 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 6 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 7 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 8 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 9 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 10 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 11 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 12 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 13 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 14 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 15 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 16 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 17 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 18 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 19 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 20 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 21 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 22 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 23 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 24 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 25 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 26 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 27 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 28 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 29 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 30 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 31 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 32 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 33 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 34 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 35 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 36 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 37 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 38 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Page 39 of M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.

FCC Test Report
Report No.: XKH-18MA1161VTSHPB-1
FCC ID: 2AN4DM115
Product: Pill Reminder
Model: M115
Received Date: Mar.28, 2018
Test Date: Mar.28 to Apr.19, 2018
Issued Date: Apr.19, 2018
Applicant: XiaMen ZAYATA Technology Inc.
Address: Room 904-6, 9/F, Venture Building, NO.1302 Jimei Avenue, Jimei District,
Xiamen, Fujian, China
Manufacturer: XiaMen ZAYATA Technology Inc.
Address: Room 904-6, 9/F, Venture Building, NO.1302 Jimei Avenue, Jimei District,
Xiamen, Fujian, China
Issued By: BUREAU VERITAS ADT (Shanghai) Corporation
Lab Address: No. 829, Xinzhuan Road, Shanghai, P.R.China (201612)
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless
specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to
us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such
notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your
unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the
uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be
used by the client to claim product certification, approval, or endorsement by TAF or any government agencies.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 1 / 39
Report Format Verision: 6.1.1
Table of Contents
Release Control Record .................................................................................................................................... 4
Certificate of Conformity ......................................................................................................................... 5
Summary of Test Results ........................................................................................................................ 6
2.1
2.2
2.3
Test Instruments .................................................................................................................................. 7
Measurement Uncertainty ................................................................................................................... 8
Modification Record ............................................................................................................................ 8
General Information ................................................................................................................................ 9
3.1
3.2
3.2.1
3.2.2
3.3
3.4
3.5
General Description of EUT ................................................................................................................ 9
Description of Test Modes ................................................................................................................. 10
Test Mode Applicability: ..................................................................................................................... 10
Test Condition: ................................................................................................................................... 12
Duty Cycle of Test Signal .................................................................................................................. 13
Description of Support Units ............................................................................................................. 14
General Description of Applied Standards ........................................................................................ 14
Test Procedure and Results .................................................................................................................. 15
4.1
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
4.2
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
4.3
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
4.4
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
4.5
4.5.1
4.5.2
4.5.3
4.5.4
4.5.5
4.5.6
4.6
4.6.1
4.6.2
4.6.3
4.6.4
4.6.5
6dB Bandwidth Measurement ........................................................................................................... 15
Limit ................................................................................................................................................... 15
Test Setup .......................................................................................................................................... 15
Test Procedures ................................................................................................................................. 15
Deviation of Test Standard................................................................................................................. 15
Test Results ....................................................................................................................................... 16
Conducted Output Power Measurement ........................................................................................... 18
Limit ................................................................................................................................................... 18
Test Setup .......................................................................................................................................... 18
Test Procedures ................................................................................................................................. 18
Deviation of Test Standard ................................................................................................................. 18
Test Results ....................................................................................................................................... 19
Power Spectral Density Measurement .............................................................................................. 21
Limit ................................................................................................................................................... 21
Test Setup .......................................................................................................................................... 21
Test Procedures ................................................................................................................................. 21
Deviation of Test Standard ................................................................................................................. 21
Test Results ....................................................................................................................................... 22
Emissions in non-restricted frequency bands ................................................................................... 24
Limit ................................................................................................................................................... 24
Test Setup .......................................................................................................................................... 24
Test Procedures ................................................................................................................................. 24
Deviation of Test Standard ................................................................................................................. 24
Test Results ....................................................................................................................................... 25
Radiated Emission Measurement ..................................................................................................... 29
Limits ................................................................................................................................................. 29
Test Procedures ................................................................................................................................. 29
Deviation from Test Standard ............................................................................................................ 30
Test Setup .......................................................................................................................................... 31
EUT Operating Conditions................................................................................................................. 32
Test Results ....................................................................................................................................... 32
Conducted Emission Measurement .................................................................................................. 36
Limits ................................................................................................................................................. 36
Test Procedures ................................................................................................................................. 36
Deviation from Test Standard ............................................................................................................ 36
Test Setup .......................................................................................................................................... 36
EUT Operating Conditions................................................................................................................. 37
Report No.: XKH-18MA1161VTSHPB-1
Page No. 2 / 39
Report Format Verision: 6.1.1
4.6.6 Test Results ....................................................................................................................................... 37
Pictures of Test Arrangements .............................................................................................................. 39
Report No.: XKH-18MA1161VTSHPB-1
Page No. 3 / 39
Report Format Verision: 6.1.1
Release Control Record
Issue No.
Description
Date Issued
XKH-18MA1161VTSHPB-1
Original release
Apr.19, 2018
Report No.: XKH-18MA1161VTSHPB-1
Page No. 4 / 39
Report Format Verision: 6.1.1
1
Certificate of Conformity
Product: Pill Reminder
Brand: -Model: M115
Applicant: XiaMen ZAYATA Technology Inc.
Test Date: Mar.28 to Apr.19, 2018
Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247)
ANSI C63.10:2013
The above equipment has been tested by BUREAU VERITAS ADT (Shanghai) Corporation, and found
compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under
Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the
sample’s EMC characteristics under the conditions specified in this report.
Prepared by :
Date:
Apr.19, 2018
Date:
Apr.19, 2018
Bing YE
Testing Engineer
Approved by :
Joy ZHU
Testing Manager
Report No.: XKH-18MA1161VTSHPB-1
Page No. 5 / 39
Report Format Verision: 6.1.1
2
Summary of Test Results
The EUT has been tested according to the following specifications:
47 CFR FCC Part 15, Subpart C (SECTION 15.247)
FCC
Test Item
Result
Remarks
15.207
AC Power Conducted Emission
PASS
Meet the requirement of limit.
15.205 /
15.209 /
Radiated Emissions Measurement
PASS
Meet the requirement of limit.
15.247(d)
Emissions in non-restricted
frequency bands
PASS
Meet the requirement of limit.
15.247(a)(2)
6dB bandwidth
PASS
Meet the requirement of limit.
15.247(b)
Conducted power
PASS
Meet the requirement of limit.
15.247(e)
Power Spectral Density
PASS
Meet the requirement of limit.
15.203
Antenna Requirement
PASS
No antenna connector is used.
Clause
15.247(d)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 6 / 39
Report Format Verision: 6.1.1
2.1
Test Instruments
Equipment
Manufacturer Model No.
Serial No.
Last Cal.
Next Cal.
Hybrid antenna(25MHz-1.5GHz)
Horn Antenna(1GHz -18GHz)
Pre-Amplifier(100kHz-1.3GHz)
Pre-Amplifier(1GHz-26.5GHz)
EMI test recerver
Spectrum Analyzer
EMI test recerver
LISN
Test Software
Test Software
Schwarzbeck
Schwarzbeck
Agilent
Agilent
R&S
Keysight
R&S
R&S
Toyo
Keysight
E1A1001
E1A1017
E1A2001
E1A2002
E1R1005
E1S1003
E1R1001
E1L1011
N/A
N/A
Feb.28, 17
Sep.01, 17
Oct.19, 2017
Mar. 27, 17
Nov.29, 17
Jun. 13, 17
Mar.27, 18
Aug.01, 16
N/A
N/A
Feb.27, 19
Aug.31, 19
Oct.18, 18
Mar. 26, 19
Nov.28, 18
Jun. 12, 18
Mar.26, 19
Jul.31, 18
N/A
N/A
Report No.: XKH-18MA1161VTSHPB-1
VULB9168
BBHA9120D
8447D
8449B
ESR7
N9030B
ESCS30
ENV216
Toyo
V1.01.10
Page No. 7 / 39
Report Format Verision: 6.1.1
2.2
Measurement Uncertainty
Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the
EUT:
This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level
using a coverage factor of k=2.
Measurement
Frequency
Conducted Emissions at mains ports
Radiated Emissions up to 1 GHz
150kHz ~ 30MHz
30MHz ~ 1GHz
1GHz ~ 6GHz
6GHz ~ 18GHz
18GHz ~ 40GHz
Radiated Emissions above 1 GHz
2.3
Expanded Uncertainty
(k=2) (±)
1.83 dB
5.36 dB
3.47 dB
3.75 dB
3.30 dB
Modification Record
There were no modifications required for compliance.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 8 / 39
Report Format Verision: 6.1.1
3
3.1
General Information
General Description of EUT
Product
Pill Reminder
Brand
--
Test Model
M115
Model Difference
--
Power Rating
DC5V for Pill Reminder, 100-240V~, 50/60Hz,0.3A for adapter
Modulation Type
GFSK
Modulation Technology
Bluetooth Low Energy 4.2
Operating Frequency
2.402 ~ 2.480GHz
Number of Channel
40
Antenna Type
PCB antenna
Antenna Connector
--
Antenna Gain
1 dBi
Note: For more details, please refer to the User’s manual of the EUT.
Modulation Mode
TX /RX Function
BLE
1TX / 1RX
Report No.: XKH-18MA1161VTSHPB-1
Page No. 9 / 39
Report Format Verision: 6.1.1
3.2
Description of Test Modes
40 channels are provided for Bluetooth LE.
CHANNEL
FREQUENCY
CHANNEL
FREQUENCY
2402 MHz
20
2442 MHz
2404 MHz
21
2444 MHz
2406 MHz
22
2446 MHz
2408 MHz
23
2448 MHz
2410 MHz
24
2450 MHz
2412 MHz
25
2452 MHz
2414 MHz
26
2454 MHz
2416 MHz
27
2456 MHz
2418 MHz
28
2458 MHz
2420 MHz
29
2460 MHz
10
2422 MHz
30
2462 MHz
11
2424 MHz
31
2464 MHz
12
2426 MHz
32
2466 MHz
13
2428 MHz
33
2468 MHz
14
2430 MHz
34
2470 MHz
15
2432 MHz
35
2472 MHz
16
2434 MHz
36
2474 MHz
17
2436 MHz
37
2476 MHz
18
2438 MHz
38
2478 MHz
19
2440 MHz
39
2480 MHz
3.2.1 Test Mode Applicability:
EUT
Configure
Mode
RE ≥ 1G
RE < 1G
PLC
APCM
√
√
√
√
Where
Applicable to
Description
RE≥1G: Radiated Emission above 1GHz
RE≤1G: Radiated Emission below 1GHz
PLC: Power Line Conducted Emission
APCM: Antenna Port Conducted Measurement
Report No.: XKH-18MA1161VTSHPB-1
Page No. 10 / 39
Report Format Verision: 6.1.1
Radiated Emission Test (Above 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT
CONFIGURE
MODE
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TYPE
BLE
0 to 39
0, 19, 39
GFSK
Radiated Emission Test (Below 1 GHz):
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT
CONFIGURE
MODE
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TYPE
BLE
0 to 39
GFSK
Power Line Conducted Emission Test:
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT
CONFIGURE
MODE
MODE
AVAILABLE
CHANNEL
TESTED
CHANNEL
MODULATION
TYPE
BLE
0 to 39
GFSK
Antenna Port Conducted Measurement
Pre-Scan has been conducted to determine the worst-case mode from all possible combinations
between available modulations, data rates and antenna ports (if EUT with antenna diversity
architecture).
Following channel(s) was (were) selected for the final test as listed below.
EUT
CONFIGURE
MODE
MODE
BLE
Report No.: XKH-18MA1161VTSHPB-1
AVAILABLE
TESTED
MODULATION
CHANNEL
CHANNEL
TYPE
0 to 39
0, 19, 39
GFSK
Page No. 11 / 39
Report Format Verision: 6.1.1
3.2.2 Test Condition:
Applicable to
Normal Environmental Conditions
Normal Input Power
RE ≥ 1G
23deg. C, 58%RH
AC120V 60Hz
RE < 1G
23deg. C, 58%RH
AC120V 60Hz
PLC
23deg. C, 58%RH
AC120V 60Hz
APCM
25deg. C, 60%RH
AC120V 60Hz
Report No.: XKH-18MA1161VTSHPB-1
Page No. 12 / 39
Report Format Verision: 6.1.1
3.3
Duty Cycle of Test Signal
Modulation
Test Freq
(MHz)
Duty Cycle
(%)
BLE
2402
100
Report No.: XKH-18MA1161VTSHPB-1
Page No. 13 / 39
Report Format Verision: 6.1.1
3.4
Description of Support Units
The EUT has been tested as an independent unit together with other necessary accessories or support units.
3.5
General Description of Applied Standards
The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the
requirements of the following standard:
FCC Part 15, Subpart C (15.247)
KDB 558074 D01 DTS Meas Guidance v04
ANSI C63.10:2013
All relaxed test items have been performed and recorded as per the above standard.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 14 / 39
Report Format Verision: 6.1.1
4
4.1
Test Procedure and Results
6dB Bandwidth Measurement
4.1.1 Limit
For digital modulation systems, the minimum 6dB bandwidth shall be at least 500 kHz
4.1.2 Test Setup
4.1.3 Test Procedures
The EUT was tested according to DTS test procedure of “KDB558074 D01 DTS Meas Guidance” for
compliance to FCC 47CFR 15.247 requirements (clause 8.2).
The automatic bandwidth measurement capability of an instrument may be employed using the X dB
bandwidth mode with X set to 6 dB, if the functionality described above (i.e., RBW = 100 kHz, VBW ≥ 3
RBW, peak detector with maximum hold) is implemented by the instrumentation function.
4.1.4 Deviation of Test Standard
No deviation.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 15 / 39
Report Format Verision: 6.1.1
4.1.5 Test Results
BLE
Channel
Frequency
(MHz)
2402
Occpuied
Bandwidth
(MHz)
1.0583
19
2440
39
2480
6 dB Bandwidth Minimum Limit
(MHz)
(MHz)
Pass / Fail
0.6592
0.5
Pass
1.0611
0.6508
0.5
Pass
1.0616
0.6555
0.5
Pass
Spectrum Plot
BLE (2402MHz)
BLE (2440MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 16 / 39
Report Format Verision: 6.1.1
BLE (2480MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 17 / 39
Report Format Verision: 6.1.1
4.2
Conducted Output Power Measurement
4.2.1 Limit
For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30 dBm)
4.2.2 Test Setup
4.2.3 Test Procedures
The EUT was tested according to DTS test procedure of “KDB558074 D01 DTS Meas Guidance” for
compliance to FCC 47CFR 15.247 requirements (clause 9.1.1).
a) Set RBW ≥ DTS bandwidth
b) Set VBW ≥ 3 RBW.
c) Set Span ≥ 3 RBW.
d) Sweep time = auto couple.
e) Detector = peak
f) Trace mode = max hold.
g) Allow trace to fully stabilize
h) Use peak marker function to determine the peak amplitude level.
4.2.4 Deviation of Test Standard
No deviation.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 18 / 39
Report Format Verision: 6.1.1
4.2.5 Test Results
BLE
Channel
Frequency
(MHz)
2402
Average
Power
(dBm)
-13.59
19
2440
39
2480
Limit
(dBm)
Pass / Fail
30
Pass
-14.62
30
Pass
-15.26
30
Pass
Spectrum Plot
BLE (2402MHz)
BLE (2440MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 19 / 39
Report Format Verision: 6.1.1
BLE (2480MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 20 / 39
Report Format Verision: 6.1.1
4.3
Power Spectral Density Measurement
4.3.1 Limit
The Maximum of Power Spectral Density Measurement is 8 dBm/3kHz.
4.3.2 Test Setup
4.3.3 Test Procedures
The power output per FCC §15.247(e) was tested according to DTS test procedure of “KDB558074 D01
DTS Meas Guidance” (clause 10.5) for compliance to FCC 47CFR 15.247 requirements.
a) Measure the duty cycle (x) of the transmitter output signal.
b) Set instrument center frequency to DTS channel center frequency.
c) Set span to at least 1.5 OBW.
d) Set RBW to: 3 kHz ≤ RBW ≤ 100 kHz.
e) Set VBW ≥ 3 RBW.
f) Detector = power averaging (RMS) or sample detector (when RMS not available).
g) Ensure that the number of measurement points in the sweep ≥ 2 span/RBW.
h) Sweep time = auto couple.
i) Do not use sweep triggering. Allow sweep to “free run”.
j) Employ trace averaging (RMS) mode over a minimum of 100 traces.
k) Use the peak marker function to determine the maximum amplitude level.
l) Add 10 log (1/x), where x is the duty cycle measured in step (a, to the measured PSD to compute the
average PSD during the actual transmission time.
m) If resultant value exceeds the limit, then reduce RBW (no less than 3 kHz) and repeat (note that this may
require zooming in on the emission of interest and reducing the span in order to meet the minimum
measurement point requirement as the RBW is reduced).
4.3.4 Deviation of Test Standard
No deviation.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 21 / 39
Report Format Verision: 6.1.1
4.3.5 Test Results
BLE
Channel
Frequency
(MHz)
PSD
(dBm/3kHz)
Limit
(dBm/3kHz)
Pass / Fail
2402
-15.01
Pass
19
2440
-16.07
Pass
39
2480
-16.72
Pass
Spectrum Plot
BLE (2402MHz)
BLE (2440MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 22 / 39
Report Format Verision: 6.1.1
BLE (2480MHz)
Report No.: XKH-18MA1161VTSHPB-1
Page No. 23 / 39
Report Format Verision: 6.1.1
4.4
Emissions in non-restricted frequency bands
4.4.1 Limit
Below 30 dB of the highest emission level of operating band (in 100 kHz Resolution Bandwidth).
4.4.2 Test Setup
4.4.3 Test Procedures
The EUT was tested according to DTS test procedure of “KDB558074 D01 DTS Meas Guidance” (clause
11.0) for compliance to FCC 47CFR 15.247 requirements.
MEASUREMENT PROCEDURE REF
1. Set the RBW = 100 kHz.
2. Set the VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep time = auto couple.
5. Trace mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment
within the fundamental EBW.
MEASUREMENT PROCEDURE OOBE
1. Set RBW = 100 kHz.
2. Set VBW ≥ 300 kHz.
3. Detector = peak.
4. Sweep = auto couple.
5. Trace Mode = max hold.
6. Allow trace to fully stabilize.
7. Use the peak marker function to determine the maximum amplitude level.
4.4.4 Deviation of Test Standard
No deviation.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 24 / 39
Report Format Verision: 6.1.1
4.4.5 Test Results
TestMode
Channel
Max. Level
Result
Limit
Verdict
BLE
BLE
2402
2480
-14.00
-15.67
-53.12
-61.98
-34
-35.67
PASS
PASS
Spectrum Plot
BLE (2402MHz) Band Edge
BLE (2480MHz) Band Edge
Report No.: XKH-18MA1161VTSHPB-1
Page No. 25 / 39
Report Format Verision: 6.1.1
TestMode
Channel
FreqRange
RefLevel
Result
Limit
Verdict
BLE
BLE
BLE
BLE
BLE
BLE
2402
2402
2440
2440
2480
2480
30~1000
1000~26500
30~1000
1000~26500
30~1000
1000~26500
-13.96
-13.96
-14.92
-14.92
-15.56
-15.56
-67.62
-54.86
-72.39
-55.12
-65.27
-55.81
-43.96
-43.96
-44.92
-44.92
-45.56
-45.56
PASS
PASS
PASS
PASS
PASS
PASS
Spectrum Plot
BLE (2402MHz) Out-of-Band Emissions
Report No.: XKH-18MA1161VTSHPB-1
Page No. 26 / 39
Report Format Verision: 6.1.1
BLE (2440MHz) Out-of-Band Emissions
Report No.: XKH-18MA1161VTSHPB-1
Page No. 27 / 39
Report Format Verision: 6.1.1
BLE (2480MHz) Out-of-Band Emissions
Report No.: XKH-18MA1161VTSHPB-1
Page No. 28 / 39
Report Format Verision: 6.1.1
4.5
Radiated Emission Measurement
4.5.1 Limits
Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified
as below table.
Frequencies
(MHz)
Field Strength
(microvolts/meter)
Measurement Distance
(meters)
0.009 ~ 0.490
2400/F (kHz)
300
0.490 ~ 1.705
24000/F (kHz)
30
1.705 ~ 30.0
30
30
30 ~ 88
100
88 ~ 216
150
216 ~ 960
200
Above 960
500
NOTE:
1. The lower limit shall apply at the transition frequencies.
2. Emission level (dBuV/m) = 20 log Emission level (uV/m).
3. For frequencies above 1000 MHz, the field strength limits are based on average detector, however, the
peak field strength of any emission shall not exceed the maximum permitted average limits, specified
above by more than 20 dB under any condition of modulation.
4.5.2 Test Procedures
For Radiated emission below 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room.
The table was rotated 360 degree to determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of
a variable-height antenna tower.
c. Both X and Y axes of the antenna are set to make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and the rotate table was turned from
0 degree to 360 degree to find the maximum reading.
e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
Note:
The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below
30MHz.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 29 / 39
Report Format Verision: 6.1.1
For Radiated emission above 30MHz
a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1 GHz) / 1.5 meters (for above 1
GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to
determine the position of the highest radiation.
b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top
of a variable-height antenna tower.
c. The height of antenna is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned
to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to
find the maximum reading.
e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum
hold mode when the test frequency is below 1 GHz.
f. The test-receiver system was set to peak and average detected function and specified bandwidth with
maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets
average limit, measurement with the average detector is unnecessary.
Note:
1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120 kHz & 360 kHz
for Quasi-peak detection (QP) at frequency below 1 GHz.
2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz
for Peak detection (PK) at frequency above 1 GHz.
3. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 1/T for
RMS Average (Duty cycle < 98 %) for Peak detection at frequency above 1 GHz.
4. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 10 Hz
(Duty cycle ≥ 98 %) for Average detection (AV) at frequency above 1 GHz.
5. All modes of operation were investigated and the worst-case emissions are reported.
4.5.3 Deviation from Test Standard
No deviation.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 30 / 39
Report Format Verision: 6.1.1
4.5.4 Test Setup
For the actual test configuration, please refer to the attached file (Test Setup Photo).
Report No.: XKH-18MA1161VTSHPB-1
Page No. 31 / 39
Report Format Verision: 6.1.1
4.5.5 EUT Operating Conditions
a. Placed the EUT on a testing table.
b. Use the software to control the EUT under transmission condition continuously at specific channel
frequency.
4.5.6 Test Results
Radiated Emissions Range 9kHz~30MHz
The amplitude of spurious emissions which are attenuated by more than 20 dB below the permissible value
has no need to be reported.
Radiated Emissions Range 30MHz~1GHz
Below is the worst test data
Channel
TX Channel 0
Detector Function
Quasi-Peak (QP)
Frequency Range
30MHz ~ 1GHz
Antenna Polarity
Horizontal
Spurious Emission Level
No.
Frequency
(MHz)
55.220
99.355
146.885
177.440
203.145
300.630
Emission Level
(dBuV/m)
13.35
13.24
14.12
18.49
19.00
19.75
Limit
(dBuV/m)
40.0
43.5
43.5
43.5
43.5
46.5
Margin
(dB)
-26.65
-30.26
-29.38
-25.01
-24.50
-26.75
Correction Factor
(dB/m)
-17.46
-20.09
-16.77
-16.78
-18.95
-15.87
REMARKS:
1. Emission Level(dBuV/m) = Spectrum reading (dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Test Plot:
Report No.: XKH-18MA1161VTSHPB-1
Page No. 32 / 39
Report Format Verision: 6.1.1
Channel
TX Channel 0
Detector Function
Quasi-Peak (QP)
Frequency Range
30MHz ~ 1GHz
Antenna Polarity
Vertical
Spurious Emission Level
No.
Frequency
(MHz)
30.970
65.405
93.535
164.830
181.805
302.085
Emission Level
(dBuV/m)
19.06
18.86
15.11
18.49
20.10
13.85
Limit
(dBuV/m)
40.0
40.0
43.5
43.5
43.5
46.5
Margin
(dB)
-20.94
-21.14
-28.39
-25.01
-23.40
-32.65
Correction Factor
(dB/m)
-16.05
-16.71
-19.17
-14.83
-15.75
-14.04
REMARKS:
1. Emission Level(dBuV/m) = Original Spectrum reading (dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Test Plot:
Report No.: XKH-18MA1161VTSHPB-1
Page No. 33 / 39
Report Format Verision: 6.1.1
Radiated Emission Range 1GHz~10th Harmonic
BLE
Below is the worst test data
Channel
TX Channel 0
Peak (PK)
Detector Function
Frequency Range
1GHz ~ 25GHz
Average (AV)
Spurious Emission Level
No.
Frequency
(MHz)
4804.00
4804.00
4804.00
4804.00
Emission
Level
(dBuV/m)
51.26
38.65
51.04
39.49
Limit
(dBuV/m)
Margin
(dB)
74.00
54.00
74.00
54.00
-22.74
-15.35
-22.96
-14.51
Correction
Factor
(dB/m)
4.38
4.38
4.38
4.38
Antenna
Polarity
Detector
PK
AV
PK
AV
REMARKS:
1. Emission Level(dBuV/m) = Original Spectrum reading (dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Channel
TX Channel 19
Peak (PK)
Detector Function
Frequency Range
1GHz ~ 25GHz
Average (AV)
Spurious Emission Level
No.
Frequency
(MHz)
4884.00
4884.00
4884.00
4884.00
Emission
Level
(dBuV/m)
49.24
39.14
49.68
39.56
Limit
(dBuV/m)
Margin
(dB)
74.00
54.00
74.00
54.00
-24.76
-14.86
-24.32
-14.44
Correction
Factor
(dB/m)
4.54
4.54
4.54
4.54
Antenna
Polarity
Detector
PK
AV
PK
AV
REMARKS:
1. Emission Level(dBuV/m) = Original Spectrum reading (dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: XKH-18MA1161VTSHPB-1
Page No. 34 / 39
Report Format Verision: 6.1.1
Channel
TX Channel 39
Peak (PK)
Detector Function
Frequency Range
1GHz ~ 25GHz
Average (AV)
Spurious Emission Level
No.
Frequency
(MHz)
4960.00
4960.00
4960.00
4960.00
Emission
Level
(dBuV/m)
50.89
39.76
50.96
39.83
Limit
(dBuV/m)
Margin
(dB)
74.00
54.00
74.00
54.00
-23.11
-14.24
-23.04
-14.17
Correction
Factor
(dB/m)
4.72
4.72
4.72
4.72
Antenna
Polarity
Detector
PK
AV
PK
AV
REMARKS:
1. Emission Level(dBuV/m) = Original Spectrum reading (dBuV) + Correction Factor(dB/m)
2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB)
3. The other emission levels were very low against the limit.
4. Margin value = Emission Level – Limit value
Report No.: XKH-18MA1161VTSHPB-1
Page No. 35 / 39
Report Format Verision: 6.1.1
4.6
Conducted Emission Measurement
4.6.1 Limits
Conducted Limit (dBuV)
Quasi-peak
Average
0.15 - 0.5
66 - 56
56 - 46
0.50 - 5.0
56
46
5.0 - 30.0
60
50
Note: 1. The lower limit shall apply at the transition frequencies.
2. The limit decreases in line with the logarithm of the frequency in the range of 0.15 to 0.50MHz.
Frequency (MHz)
4.6.2 Test Procedures
a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being
connected to the power mains through a line impedance stabilization network (LISN). Other support
units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH
of coupling impedance for the measuring instrument.
b. Both lines of the power mains connected to the EUT were checked for maximum conducted
interference.
c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was
not recorded.
NOTE: The resolution bandwidth and video bandwidth of test receiver is 9kHz for quasi-peak detection (QP)
and average detection (AV) at frequency 0.15MHz-30MHz.
4.6.3 Deviation from Test Standard
No deviation.
4.6.4 Test Setup
Vertical Ground
Reference Plane
40cm
Test Receiver
EUT
80cm
LISN
Horizontal Ground
Reference Plane
Note: 1.Support units were connected to second LISN.
For the actual test configuration, please refer to the attached file (Test Setup Photo).
Report No.: XKH-18MA1161VTSHPB-1
Page No. 36 / 39
Report Format Verision: 6.1.1
4.6.5 EUT Operating Conditions
Same as 4.1.6.
4.6.6 Test Results
Working While Charging
Phase
No
Detector Function
Line (L)
Freq.
[MHz]
0.39242
0.68567
0.80688
1.05865
1.50048
2.97064
Corr.
Factor
(dB)
9.60
9.60
9.60
9.60
9.60
9.60
Reading Value
[dB (uV)]
Q.P.
AV.
13.46
8.37
14.44
9.66
24.99
20.41
14.43
8.72
12.73
7.83
10.77
5.26
Emission Level
[dB (uV)]
Q.P.
AV.
23.06
17.97
24.04
19.26
34.59
30.01
24.03
18.32
22.33
17.43
20.37
14.86
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
58.01
48.01
56.00
46.00
56.00
46.00
56.00
46.00
56.00
46.00
56.00
46.00
Margin
(dB)
Q.P.
AV.
-34.95
-30.04
-31.96
-26.74
-21.41
-15.99
-31.97
-27.68
-33.67
-28.57
-35.63
-31.14
REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 37 / 39
Report Format Verision: 6.1.1
Phase
No
Detector Function
Neutral (N)
Freq.
[MHz]
0.40806
0.81470
1.03910
1.53958
2.26293
4.29222
Corr.
Factor
(dB)
9.60
9.60
9.60
9.60
9.60
9.61
Reading Value
[dB (uV)]
Q.P.
AV.
10.01
1.53
18.95
12.40
9.86
2.06
10.17
1.37
6.65
-0.19
5.12
-2.33
Emission Level
[dB (uV)]
Q.P.
AV.
19.61
11.13
28.55
22.00
19.46
11.66
19.77
10.97
16.25
9.41
14.73
7.28
Quasi-Peak (QP) /
Average (AV)
Limit
[dB (uV)]
Q.P.
AV.
57.69
47.69
56.00
46.00
56.00
46.00
56.00
46.00
56.00
46.00
56.00
46.00
Margin
(dB)
Q.P.
AV.
-38.08
-36.56
-27.45
-24.00
-36.54
-34.34
-36.23
-35.03
-39.75
-36.59
-41.27
-38.72
REMARKS:
1. Q.P. and AV. are abbreviations of quasi-peak and average individually.
2. The emission levels of other frequencies were very low against the limit.
3. Margin value = Emission level - Limit value
4. Correction factor = Insertion loss + Cable loss
5. Emission Level = Correction Factor + Reading Value.
Report No.: XKH-18MA1161VTSHPB-1
Page No. 38 / 39
Report Format Verision: 6.1.1
5
Pictures of Test Arrangements
Please refer to the attached file (Test Setup Photo).
--- END ---
Report No.: XKH-18MA1161VTSHPB-1
Page No. 39 / 39
Report Format Verision: 6.1.1
Download: M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Mirror Download [FCC.gov]M115 PIll Reminder Test Report 1 Xiamen zayata technology INC.
Document ID3838802
Application IDwHNuravW6Imn3x2MBUBrXA==
Document DescriptionRF Test Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize260.87kB (3260823 bits)
Date Submitted2018-05-04 00:00:00
Date Available2018-05-04 00:00:00
Creation Date2018-04-19 11:19:40
Producing SoftwareMicrosoft® Word 2010
Document Lastmod2018-04-19 11:19:40
Document TitleTest Report 1
Document CreatorMicrosoft® Word 2010
Document Author: Jim

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 39
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : 1
Author                          : Jim
Creator                         : Microsoft® Word 2010
Create Date                     : 2018:04:19 11:19:40+08:00
Modify Date                     : 2018:04:19 11:19:40+08:00
Producer                        : Microsoft® Word 2010