FCC ID 2ARCQ-EM7565

2ARCQEM7565, 2ARCQ EM7565, 2ARCQ-EM7565, 2ARCQ-EM7S6S, 2ARCO-EM7565, 2ARC0-EM7565

ZPE Systems, Inc. Nodegrid EM7565

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2ARCQ-EM7565 is 2ARCQ. The remaining characters of the FCC ID, -EM7565, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Nodegrid

App # Purpose Date Unique ID
1 Change in Identification 2018-11-02 rA3aWrrAMZtWG95wJRowcg==
2 Class II Permissive Change 2019-01-02 NCevWNEq9QpBmAIranRK2A==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 41,TD 2500 DOWN | LTE 7,2600 UP | UMTS CH 7 UP |
Frequency RangePower OutputToleranceEmission DesignatorRule PartsGrant Notes App #
699-716 MHz189 mW2.5ppm9M11G7D27BC 1.26
699-716 MHz160 mW2.5ppm9M09W7D27BC 1.27
699-716 MHz161 mW2.5ppm2M73W7D27BC 1.28
699-716 MHz512.9 mW2.5ppm9M11G7D27BC 2.1
699-716 MHz501.2 mW2.5ppm9M09W7D27BC 2.11
699-716 MHz488.7 mW2.5ppm2M73W7D27BC 2.12
777-787 MHz165 mW2.5ppm9M01W7D27BC 1.3
777-787 MHz193 mW2.5ppm8M97G7D27BC 1.29
777-787 MHz1.1535 Watts2.5ppm8M97G7D27BC 2.13
777-787 MHz1.0162 Watts2.5ppm9M01W7D27BC 2.14
814-824 MHz787 mW2.5ppm14M2G7D9BC 2.17
814-824 MHz706.3 mW2.5ppm14M5W7D9BC 2.18
814-824 MHz657.7 mW2.5ppm3M03W7D9BC 2.19
824-849 MHz193 mW2.5ppm4M12F9W22HBC 1.17
824-849 MHz192 mW2.5ppm13M5G7D22HBC 1.31
824-849 MHz160 mW2.5ppm13M5W7D22HBC 1.32
824-849 MHz926.8 mW2.5ppm13M5G7D22HBC 2.15
824-849 MHz907.8 mW2.5ppm13M5W7D22HBC 2.16
1.71-1.78 GHz199 mW2.5ppm18M3G7D27BC 1.7
1.71-1.78 GHz169 mW2.5ppm18M5W7D27BC 1.8
1.71-1.755 GHz192 mW2.5ppm4M12F9W27BC 1.19
1.71-1.78 GHz957.2 mW2.5ppm18M3G7D27BC 2.23
1.71-1.78 GHz957.2 mW2.5ppm18M5W7D27BC 2.24
1.85-1.91 GHz180 mW2.5ppm18M5G7D24EBC 1.2
1.85-1.91 GHz181 mW2.5ppm4M14F9W24EBC 1.18
1.85-1.91 GHz155 mW2.5ppm18M5W7D24EBC 1.21
1.85-1.91 GHz1.8155 Watts2.5ppm18M5W7D24EBC 2.4
1.85-1.91 GHz1.7458 Watts2.5ppm18M5W7D24EBC 2.5
2.305-2.315 GHz116 mW2.5ppm9M05W7D27BC 1.1
2.305-2.315 GHz138 mW2.5ppm8M99G7D27BC 1.9
2.305-2.315 GHz139 mW2.5ppm4M51G7D27BC 1.11
2.305-2.315 GHz117 mW2.5ppm4M49W7D27BC 1.12
2.305-2.315 GHz205.1 mW2.5ppm8M99G7D27BC 2.25
2.305-2.315 GHz203.2 mW2.5ppm9M05W7D27BC 2.26
2.305-2.315 GHz183.7 mW2.5ppm4M51G7D27BC 2.27
2.305-2.315 GHz171.8 mW2.5ppm4M49W7D27BC 2.28
2.496-2.69 GHz158 mW2.5ppm18M5G7D27BC 1.4
2.496-2.69 GHz129 mW2.5ppm18M5W7D27BC 1.5
2.496-2.69 GHz130 mW2.5ppm14M5W7D27BC 1.6
2.496-2.69 GHz199 mW2.5ppm37M7G7D27BC 1.15
2.496-2.69 GHz181 mW2.5ppm37M9W7D27BC 1.16
2.496-2.69 GHz1.3032 Watts2.5ppm18M5G7D27BC 2.2
2.496-2.69 GHz1.2647 Watts2.5ppm18M5W7D27BC 2.21
2.496-2.69 GHz1.2618 Watts2.5ppm14M5W7D27BC 2.22
2.496-2.69 GHz1.2331 Watts2.5ppm37M7G7D27BC 2.31
2.496-2.69 GHz1.1588 Watts2.5ppm37M9W7D27BC 2.32
2.5-2.57 GHz199 mW2.5ppm37M5G7D27BC 1.13
2.5-2.57 GHz166 mW2.5ppm37M7W7D27BC 1.14
2.5-2.57 GHz152 mW2.5ppm18M5G7D27BC 1.22
2.5-2.57 GHz129 mW2.5ppm18M5W7D27BC 1.23
2.5-2.57 GHz157 mW2.5ppm4M50G7D27BC 1.24
2.5-2.57 GHz134 mW2.5ppm4M50W7D27BC 1.25
2.5-2.57 GHz1.3996 Watts2.5ppm37M7W7D27BC 2.3
2.5-2.57 GHz1.5136 Watts2.5ppm18M5G7D27BC 2.6
2.5-2.57 GHz1.4997 Watts2.5ppm18M5W7D27BC 2.7
2.5-2.57 GHz1.4588 Watts2.5ppm4M50G7D27BC 2.8
2.5-2.57 GHz1.4454 Watts2.5ppm4M50W7D27BC 2.9
2.5-2.57 GHz1.4289 Watts2.5ppm37M5G7D27BC 2.29

Exhibits

Available Exhibits

App #Document Type Submitted
Available
2 Agent Authorization LetterCover Letter(s)
Adobe Acrobat PDF (75 kB)
2019-01-02
2019-01-02
2 Permissive Change LetterCover Letter(s)
Adobe Acrobat PDF (79 kB)
2019-01-02
2019-01-02
2 MPE ReportTest Report
Adobe Acrobat PDF (405 kB)
2019-01-02
2019-01-02
2 Internal PhotosInternal Photos
Adobe Acrobat PDF (431 kB)
2019-01-02
2019-01-02
2 External PhotosExternal Photos
Adobe Acrobat PDF (683 kB)
2019-01-02
2019-01-02
2 Setup Photos 90 LTETest Setup Photos
Adobe Acrobat PDF (249 kB)
2019-01-02
2019-01-02
2 Setup Photos 27 LTE BAND 30Test Setup Photos
Adobe Acrobat PDF (247 kB)
2019-01-02
2019-01-02
2 Setup Photos 27 LTETest Setup Photos
Adobe Acrobat PDF (247 kB)
2019-01-02
2019-01-02
2 Setup Photos 27 WCMDATest Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02
2019-01-02
2 Setup Photos 22H 24E LTETest Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02
2019-01-02
2 Setup Photos 22H 24ETest Setup Photos
Adobe Acrobat PDF (248 kB)
2019-01-02
2019-01-02
2 Setup Photos 22hTest Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02
2019-01-02
2 Test Report 90 LTETest Report
Adobe Acrobat PDF (919 kB)
2019-01-02
2019-01-02
2 Test Report 27 LTE BAND 30Test Report
Adobe Acrobat PDF (872 kB)
2019-01-02
2019-01-02
2 Test Report 27 LTETest Report
Adobe Acrobat PDF (2766 kB)
2019-01-02
2019-01-02
2 Test Report 27 WCDMATest Report
Adobe Acrobat PDF (984 kB)
2019-01-02
2019-01-02
2 Test Report 22H 24E LTETest Report
Adobe Acrobat PDF (1357 kB)
2019-01-02
2019-01-02
2 Test Report 22H 24ETest Report
Adobe Acrobat PDF (984 kB)
2019-01-02
2019-01-02
2 Test Report 22HTest Report
Adobe Acrobat PDF (1002 kB)
2019-01-02
2019-01-02
2 Confidentiality LetterCover Letter(s)
Adobe Acrobat PDF (69 kB)
2019-01-02
2019-01-02
1 Label Location InfoID Label/Location Info
Adobe Acrobat PDF (193 kB)
2018-11-02
2018-11-02
1 Ltr From Orig ApplicantCover Letter(s)
Adobe Acrobat PDF (179 kB)
2018-11-02
2018-11-02
1 Ltr From New ApplicantCover Letter(s)
Adobe Acrobat PDF (118 kB)
2018-11-02
2018-11-02
1 FCC Original CertificateCover Letter(s)
Adobe Acrobat PDF (172 kB)
2018-11-02
2018-11-02
1 External PhotoExternal Photos
Adobe Acrobat PDF (193 kB)
2018-11-02
2018-11-02
1 Agent Authorization LetterCover Letter(s)
Adobe Acrobat PDF (115 kB)
2018-11-02
2018-11-02

APP # 2 (2019-01-02)

App # Document Type Submitted
Available
2 Agent Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (75 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Permissive Change Letter Cover Letter(s)
Adobe Acrobat PDF (79 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 MPE Report Test Report
Adobe Acrobat PDF (405 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Internal Photos Internal Photos
Adobe Acrobat PDF (431 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 External Photos External Photos
Adobe Acrobat PDF (683 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 90 LTE Test Setup Photos
Adobe Acrobat PDF (249 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 27 LTE BAND 30 Test Setup Photos
Adobe Acrobat PDF (247 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 27 LTE Test Setup Photos
Adobe Acrobat PDF (247 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 27 WCMDA Test Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 22H 24E LTE Test Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 22H 24E Test Setup Photos
Adobe Acrobat PDF (248 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Setup Photos 22h Test Setup Photos
Adobe Acrobat PDF (290 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 90 LTE Test Report
Adobe Acrobat PDF (919 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 27 LTE BAND 30 Test Report
Adobe Acrobat PDF (872 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 27 LTE Test Report
Adobe Acrobat PDF (2766 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 27 WCDMA Test Report
Adobe Acrobat PDF (984 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 22H 24E LTE Test Report
Adobe Acrobat PDF (1357 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 22H 24E Test Report
Adobe Acrobat PDF (984 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Test Report 22H Test Report
Adobe Acrobat PDF (1002 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00
2 Confidentiality Letter Cover Letter(s)
Adobe Acrobat PDF (69 kB)
2019-01-02 00:00:00
2019-01-02 00:00:00

APP # 1 (2018-11-02)

App # Document Type Submitted
Available
1 Label Location Info ID Label/Location Info
Adobe Acrobat PDF (193 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00
1 Ltr From Orig Applicant Cover Letter(s)
Adobe Acrobat PDF (179 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00
1 Ltr From New Applicant Cover Letter(s)
Adobe Acrobat PDF (118 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00
1 FCC Original Certificate Cover Letter(s)
Adobe Acrobat PDF (172 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00
1 External Photo External Photos
Adobe Acrobat PDF (193 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00
1 Agent Authorization Letter Cover Letter(s)
Adobe Acrobat PDF (115 kB)
2018-11-02 00:00:00
2018-11-02 00:00:00

APP # 2 (2019-01-02)

App # Document Type Submitted
Available
2 Oper Description Antenna Spec Operational Description
Adobe Acrobat PDF (2456 kB)
2019-01-02 00:00:00
N/A
2 Tune Up Procedure Parts List/Tune Up Info
Adobe Acrobat PDF (116 kB)
2019-01-02 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ZPE Systems, Inc.
FCC Registration Number (FRN): 0027868900
Alphanumeric FCC ID: 2ARCQEM7565
Unique Application Identifier: rA3aWrrAMZtWG95wJRowcg==
Line one: 46757 Fremont Blvd.,
City: Fremont
State: California
Country: United States
Zip Code: 94538

TCB Information
TCB Application Email Address: uscts.tcb@sgs.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID
Grantee Code: 2ARCQ
Product Code: -EM7565

Person at the applicant's address to receive grant or for contact
Name: Arnaldo Zimmermann
Telephone Number: +1 510 590 0074 Extension:
Fax Number: +1 510 590 0074
Email: certification@zpesystems.com

Technical Contact
Firm Name:
Compliance Certification Services Inc. Wugu Lab
First Name: Yoyo
Last Name: Chen
Line 1:
No. 11 Wugong 6th Road
Line 2:
Wugu Dist.
City: New Taipei City
Country:
Taiwan
Zip Code: 24891
Telephone Number:
886222999720

Extension:
1702
Fax Number: 886222999721
E-Mail:

Non Technical Contact
Firm Name: Compliance Certification Services Inc. Wugu Lab
First Name: Yoyo
Last Name: Chen
Line 1: No. 11 Wugong 6th Road
Line 2: Wugu Dist.
City: New Taipei City
Country: Taiwan
Zip Code: 24891
Telephone Number: 886222999720 Extension: 1702
Fax Number: 886222999721
E-Mail: yoyo.chen@sgs.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Nodegrid

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Change in identification of presently authorized equipment. Original FCC ID: N7NEM75 Grant Date: 02/23/2018

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services Inc. Wugu Lab.
First Name:   Hank
Last Name:   Lee
Telephone Number: 886-2-2299-9720 Extension: 1529
Fax Number:  +886-2-2299-9721
E-mail:  hank.lee@sgs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Sam Chuang
Title of authorized signature:  Manager

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: ZPE Systems, Inc.
FCC Registration Number (FRN): 0027868900
Alphanumeric FCC ID: 2ARCQEM7565
Unique Application Identifier: NCevWNEq9QpBmAIranRK2A==
Line one: 46757 Fremont Blvd.,
City: Fremont
State: California
Country: United States
Zip Code: 94538

TCB Information
TCB Application Email Address: uscts.tcb@sgs.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID
Grantee Code: 2ARCQ
Product Code: -EM7565

Person at the applicant's address to receive grant or for contact
Name: Arnaldo Zimmermann
Telephone Number: +1 510 590 0074 Extension:
Fax Number: +1 510 590 0074
Email: certification@zpesystems.com

Technical Contact
Firm Name:
Compliance Certification Services Inc. Wugu Lab
First Name: Yoyo
Last Name: Chen
Line 1:
No. 11, Wugong 6th Rd.
Line 2:
Wugu Dist.
Country:
Taiwan
Zip Code: 24891
Telephone Number:
886222999720

Extension:
1702
Fax Number: 886222999721
E-Mail:

Non Technical Contact
Firm Name: Compliance Certification Services Inc. Wugu Lab
First Name: Yoyo
Last Name: Chen
Line 1: No. 11, Wugong 6th Rd.
Line 2: Wugu Dist.
City: New Taipei City
Country: Taiwan
Zip Code: 24891
Telephone Number: 886222999720 Extension:
Fax Number: 886222999721
E-Mail: yoyo.chen@sgs.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   No
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):  
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Nodegrid

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   Compliance Certification Services Inc. Wugu Lab.
First Name:   Hank
Last Name:   Lee
Telephone Number: 886-2-2299-9720 Extension: 1529
Fax Number:  +886-2-2299-9721
E-mail:  hank.lee@sgs.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change: Adds a Dipole Swivel terminal Antenna, Model: TG.30.8113, Brand: Taoglas Single Modular Approval. Power out listed is ERP/EIRP. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  David Wang
Title of authorized signature:  Division Manager

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/02/2019

Application Dated: 01/02/2019
ZPE Systems, Inc.
46757 Fremont Blvd.,
Fremont, CA 94538
 
Attention: Arnaldo Zimmermann

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARCQ-EM7565
Name of Grantee:  ZPE Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Nodegrid
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.9311 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 1.8155 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.7889 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 1.8155 2.5  PM 18M5W7D
BC 24E 1850.0  -  1910.0 1.7458 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 1.5136 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 1.4997 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 1.4588 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 1.4454 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.5129 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.5012 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.4887 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 1.1535 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 1.0162 2.5  PM 9M01W7D
BC 22H 824.0  -  849.0 0.9268 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.9078 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.787 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.7063 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.6577 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 1.3032 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 1.2647 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 1.2618 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.9572 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.9572 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.2051 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.2032 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.1837 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.1718 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 1.4289 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 1.3996 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 1.2331 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 1.1588 2.5  PM 37M9W7D

Class II Permissive Change: Adds a Dipole Swivel terminal Antenna, Model: TG.30.8113, Brand: Taoglas

Single Modular Approval. Power out listed is ERP/EIRP. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZPE Systems, Inc.
46757 Fremont Blvd.,
Fremont, CA 94538
United States
  Date of Grant: 01/02/2019

Application Dated: 01/02/2019
 
Attention: Arnaldo Zimmermann

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARCQ-EM7565
Name of Grantee:  ZPE Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Nodegrid
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 22H 824.0  -  849.0 0.9311 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 1.8155 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.7889 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 1.8155 2.5  PM 18M5W7D
BC 24E 1850.0  -  1910.0 1.7458 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 1.5136 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 1.4997 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 1.4588 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 1.4454 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.5129 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.5012 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.4887 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 1.1535 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 1.0162 2.5  PM 9M01W7D
BC 22H 824.0  -  849.0 0.9268 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.9078 2.5  PM 13M5W7D
BC 90 814.0  -  824.0 0.787 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.7063 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.6577 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 1.3032 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 1.2647 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 1.2618 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.9572 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.9572 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.2051 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.2032 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.1837 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.1718 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 1.4289 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 1.3996 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 1.2331 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 1.1588 2.5  PM 37M9W7D

Class II Permissive Change: Adds a Dipole Swivel terminal Antenna, Model: TG.30.8113, Brand: Taoglas

Single Modular Approval. Power out listed is ERP/EIRP. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA370195
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 11/02/2018

Application Dated: 11/02/2018
ZPE Systems, Inc.
46757 Fremont Blvd.,
Fremont, CA 94538
 
Attention: Arnaldo Zimmermann

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARCQ-EM7565
Name of Grantee:  ZPE Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Nodegrid
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.

BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.
COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZPE Systems, Inc.
46757 Fremont Blvd.,
Fremont, CA 94538
United States
  Date of Grant: 11/02/2018

Application Dated: 11/02/2018
 
Attention: Arnaldo Zimmermann

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ARCQ-EM7565
Name of Grantee:  ZPE Systems, Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Nodegrid
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
BC 90 814.0  -  824.0 0.19 2.5  PM 14M2G7D
BC 90 814.0  -  824.0 0.157 2.5  PM 14M5W7D
BC 90 814.0  -  824.0 0.16 2.5  PM 3M03W7D
BC 27 2496.0  -  2690.0 0.158 2.5  PM 18M5G7D
BC 27 2496.0  -  2690.0 0.129 2.5  PM 18M5W7D
BC 27 2496.0  -  2690.0 0.13 2.5  PM 14M5W7D
BC 27 1710.0  -  1780.0 0.199 2.5  PM 18M3G7D
BC 27 1710.0  -  1780.0 0.169 2.5  PM 18M5W7D
BC 27 2305.0  -  2315.0 0.138 2.5  PM 8M99G7D
BC 27 2305.0  -  2315.0 0.116 2.5  PM 9M05W7D
BC 27 2305.0  -  2315.0 0.139 2.5  PM 4M51G7D
BC 27 2305.0  -  2315.0 0.117 2.5  PM 4M49W7D
BC 27 2500.0  -  2570.0 0.199 2.5  PM 37M5G7D
BC 27 2500.0  -  2570.0 0.166 2.5  PM 37M7W7D
BC 27 2496.0  -  2690.0 0.199 2.5  PM 37M7G7D
BC 27 2496.0  -  2690.0 0.181 2.5  PM 37M9W7D
BC 22H 824.0  -  849.0 0.193 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.181 2.5  PM 4M14F9W
BC 27 1710.0  -  1755.0 0.192 2.5  PM 4M12F9W
BC 24E 1850.0  -  1910.0 0.18 2.5  PM 18M5G7D
BC 24E 1850.0  -  1910.0 0.155 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.152 2.5  PM 18M5G7D
BC 27 2500.0  -  2570.0 0.129 2.5  PM 18M5W7D
BC 27 2500.0  -  2570.0 0.157 2.5  PM 4M50G7D
BC 27 2500.0  -  2570.0 0.134 2.5  PM 4M50W7D
BC 27 699.0  -  716.0 0.189 2.5  PM 9M11G7D
BC 27 699.0  -  716.0 0.16 2.5  PM 9M09W7D
BC 27 699.0  -  716.0 0.161 2.5  PM 2M73W7D
BC 27 777.0  -  787.0 0.193 2.5  PM 8M97G7D
BC 27 777.0  -  787.0 0.165 2.5  PM 9M01W7D
BC 22H 824.0  -  849.0 0.192 2.5  PM 13M5G7D
BC 22H 824.0  -  849.0 0.16 2.5  PM 13M5W7D

Power out is conducted at the antenna terminal. Single Modular Approval. This device is to be used only for mobile and fixed application; and must not be co- located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 22/24/27. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/41. This device also supports CA UL on the LTE Bands 7/41.


BC: The output power is continuously variable from the value listed in this entry to 5%-10% of the value listed.

Mail To:


EA242215

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details