FCC ID 2AX2URN934A

RN934A

by Rolling Wireless S.a r.l.

Grantee Code: 2AX2U   Product Code: RN934A
Latest application date: 2024-01-11

FCC ID Device Details

FCC ID2AX2URN934A
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AX2U
Product CodeRN934A
Applicant BusinessRolling Wireless S.a r.l. 🇱🇺
Related Domains rollingwireless.com sgs.com
Equipment ClassRN934A
Test FirmSGS-CSTC Standards Technical Services (Suzhou) Co.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2502.5-2567.5 MHzOriginal Equipment2024-01-11

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-07-09PDF 925.9 KB
Internal photoInternal Photos2024-07-09PDF 586.6 KB
External photoExternal Photos2024-07-09PDF 577.9 KB
LabelID Label/Location Info2024-01-11PDF 102.3 KB
Test Setup photoTest Setup Photos2024-07-09PDF 423.3 KB
Test setup photosTest Setup Photos2024-07-09PDF 622.4 KB
Appendix B.1 - LTE Band 7Test Report2024-01-11PDF 4.5 MB
Appendix B.2 - LTE Band CA_7C_Part1Test Report2024-01-11PDF 4 MB
Appendix B.2 - LTE Band CA_7C_Partt2Test Report2024-01-11PDF 3.3 MB
Appendix B.3 - NR Band n78(3450-3550)_Part1Test Report2024-01-11PDF 5 MB
Appendix B.3 - NR Band n78(3450-3550)_Part2Test Report2024-01-11PDF 4.9 MB
Appendix B.3 - NR Band n78(3450-3550)_Part3Test Report2024-01-11PDF 4.5 MB
Test Report for 5G NRTest Report2024-01-11PDF 671.3 KB
Test Report for LTETest Report2024-01-11PDF 802 KB
Test reportTest Report2024-01-11PDF 900.5 KB
Test reportTest Report2024-01-11PDF 2.2 MB
Test report for 5G NRTest Report2024-01-11PDF 1.1 MB
Test report for LTETest Report2024-01-11PDF 1.3 MB
FCC U.S. agent LetterAttestation Statements2024-01-11PDF 153.4 KB
QSF27-14-04_Rev1.0_Applicant_Declaration_LetterAttestation Statements2024-01-11PDF 160.6 KB
Auth letterCover Letter(s)2024-01-11PDF 127.8 KB
Confidentiality_FCCCover Letter(s)2024-01-11PDF 186.5 KB
FCC Modular Cover letterCover Letter(s)2024-01-11PDF 215.2 KB
MPERF Exposure Info2024-01-11PDF 690.1 KB
MPERF Exposure Info2024-01-11PDF 309.8 KB
Bolck diagram Metadata onlyBlock DiagramPDF 265.6 KB
Schematic Metadata onlySchematicsPDF 1.2 MB
Operational description Metadata onlyOperational DescriptionPDF 200.9 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 216.4 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 258 KB

Application Information

Application ID1SJDNByhyJvYHP0bmVMExg==
Final Action Date2024-01-11
Application PurposeOriginal Equipment
Applicant FRN0030146674
ModelRN934A
Frequency Range2502.5-2567.5 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionRN934A
Responsible PartyWilson Lin, Certification Manager, Wilson.Lin@rollingwireless.com , +86-755-8611-9834
AgentWell Well Well, SGS-CSTC Standards Technical Services (Suzhou) Co., Well.Wei@sgs.com , +8618550371893
Technical ContactWell Wei, SGS-CSTC Standards Technical Services (Suzhou) Co., Well.Wei@sgs.com , +8618550371893
Non-Technical ContactWell Wei, SGS-CSTC Standards Technical Services (Suzhou) Co., Well.Wei@sgs.com , +8618550371893
Test FirmWell Wei, SGS-CSTC Standards Technical Services (Suzhou) Co., well.wei@sgs.com , +86 18550371893
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityYes
Short-Term Confidentiality Date07/09/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Single Module approval is filing. This device is to be used only for mobile and fixed application; The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 27. This device supports LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7, and supports LTE uplink carrier aggregation 7C. This device also supports FR1 5G NR modes of 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Bands n78, and ENDC mode are supported by this device, the UL ENDC includes DC_7A_n78A.

Applications

Application IDDatePurpose
1SJDNByhyJvYHP0bmVMExg==2024-01-11Original Equipment
+I1EKJt5l1/cQjDvRDaFgw==2024-01-11Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
2502.5-2567.5 MHz0.1742.5ppm4M48W7D27
2507.5-2562.5 MHz0.2072.5ppm13M5G7D27
2507.5-2562.5 MHz0.222.5ppm28M2G7D27
2507.5-2564.7 MHz0.1952.5ppm23M1W7D27
2510-2560 MHz0.1662.5ppm17M9W7D27
2510-2560 MHz0.2172.5ppm37M7G7D27
2510-2560 MHz0.1812.5ppm37M7W7D27
3450-3550 MHz0.3362.5ppm97M6W7D27
3450-3550 MHz0.3492.5ppm47M5W7D27
3450-3550 MHz0.4242.5ppm97M4G7D27

Grants

TCB Grant - Application 1SJDNByhyJvYHP0bmVMExg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/11/2024

Application Dated: 01/11/2024
Rolling Wireless S.a r.l.
15, rue Edward Steichen
P.O. Box 2540,
Luxembourg, 2540
Luxembourg
 
Attention: Wilson Lin , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URN934A
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RN934A
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2510.0  -  2560.0 0.204 2.5  PM 17M9G7D
27 2510.0  -  2560.0 0.166 2.5  PM 17M9W7D
27 2507.5  -  2562.5 0.207 2.5  PM 13M5G7D
27 2502.5  -  2567.5 0.174 2.5  PM 4M48W7D
27 2510.0  -  2560.0 0.217 2.5  PM 37M7G7D
27 2510.0  -  2560.0 0.181 2.5  PM 37M7W7D
27 2507.5  -  2562.5 0.22 2.5  PM 28M2G7D
27 2507.5  -  2564.7 0.195 2.5  PM 23M1W7D
27 3450.0  -  3550.0 0.424 2.5  PM 97M4G7D
27 3450.0  -  3550.0 0.336 2.5  PM 97M6W7D
27 3450.0  -  3550.0 0.349 2.5  PM 47M5W7D

Power Output listed is conducted. Single Module approval is filing. This device is to be used only for mobile and fixed application; The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 27.

This device supports LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7, and supports LTE uplink carrier aggregation 7C.

This device also supports FR1 5G NR modes of 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Bands n78, and ENDC mode are supported by this device, the UL ENDC includes DC_7A_n78A.


EAS Grant - Application 1SJDNByhyJvYHP0bmVMExg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rolling Wireless S.a r.l.
15, rue Edward Steichen P.O. Box 2540,
Luxembourg, 2540
Luxembourg
  Date of Grant: 01/11/2024

Application Dated: 01/11/2024
 
Attention: Wilson Lin , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URN934A
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: RN934A
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 2510.0  -  2560.0 0.204 2.5  PM 17M9G7D
27 2510.0  -  2560.0 0.166 2.5  PM 17M9W7D
27 2507.5  -  2562.5 0.207 2.5  PM 13M5G7D
27 2502.5  -  2567.5 0.174 2.5  PM 4M48W7D
27 2510.0  -  2560.0 0.217 2.5  PM 37M7G7D
27 2510.0  -  2560.0 0.181 2.5  PM 37M7W7D
27 2507.5  -  2562.5 0.22 2.5  PM 28M2G7D
27 2507.5  -  2564.7 0.195 2.5  PM 23M1W7D
27 3450.0  -  3550.0 0.424 2.5  PM 97M4G7D
27 3450.0  -  3550.0 0.336 2.5  PM 97M6W7D
27 3450.0  -  3550.0 0.349 2.5  PM 47M5W7D

Power Output listed is conducted. Single Module approval is filing. This device is to be used only for mobile and fixed application; The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end-user has no manual instructions to remove or install this module. For mobile operating configurations, the antenna gain, including cable loss, must not exceed the gains documented in this filing, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Part 27.

This device supports LTE of 5, 10, 15 and 20 MHz bandwidth modes for LTE Band 7, and supports LTE uplink carrier aggregation 7C.

This device also supports FR1 5G NR modes of 10, 20, 30, 40, 50, 60, 70, 80, 90 and 100 MHz bandwidth modes for TDD Bands n78, and ENDC mode are supported by this device, the UL ENDC includes DC_7A_n78A.



TCB Grant - Application +I1EKJt5l1/cQjDvRDaFgw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 01/11/2024

Application Dated: 01/11/2024
Rolling Wireless S.a r.l.
15, rue Edward Steichen
P.O. Box 2540,
Luxembourg, 2540
Luxembourg
 
Attention: Wilson Lin , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URN934A
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Part 15 Class B Digital Device
Notes: RN934A
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application +I1EKJt5l1/cQjDvRDaFgw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Rolling Wireless S.a r.l.
15, rue Edward Steichen P.O. Box 2540,
Luxembourg, 2540
Luxembourg
  Date of Grant: 01/11/2024

Application Dated: 01/11/2024
 
Attention: Wilson Lin , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AX2URN934A
Name of Grantee:  Rolling Wireless S.a r.l.
Equipment Class: Part 15 Class B Digital Device
Notes: RN934A
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



Mail To: