SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

FCC ID Filing: A3LSMA730F
Purchase on Amazon: Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 2 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 3 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 4 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 5 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 6 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 7 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 8 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 9 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 10 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 11 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 12 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 13 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 14 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd

PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21046 USA
Tel. 410.290.6652 / Fax 410.290.6654
http://www.pctest.com
MEASUREMENT REPORT
FCC PART 15.407 DFS
Date of Testing:
10/5-11/3/2017
Test Site/Location:
PCTEST Lab. Columbia, MD, USA
Test Report Serial No.:
1M1710050266-06.A3L
Applicant Name:
Samsung Electronics Co., Ltd.
129, Samsung-ro,
Yeongtong-gu, Suwon-si
Gyeonggi-do, 16677, Korea
FCC ID:
A3LSMA730F
APPLICANT:
Samsung Electronics Co., Ltd.
Application Type:
Model:
Additional Model(s):
EUT Type:
Max. RF Output Power:
Certification
SM-A730F/DS
SM-A730F
Client Only Device, No Radar Detection Capability
34.754 mW (15.41 dBm) Conducted
(802.11ac UNII Band 2A)
35.400 mW (15.49 dBm) Conducted
(802.11ac UNII Band 2C)
5260 – 5320 MHz (UNII-2A Band)
5500 – 5720 MHz (UNII-2C Band)
Unlicensed National Information Infrastructure (UNII)
Part 15.247(UNII)
KDB 905462 D02 v02
Frequency Range:
FCC Classification:
FCC Rule Part(s):
Test Procedure(s):
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report
and was tested in accordance with the measurement procedures specified in KDB 905462 D02 v02 Compliance Measurement Procedures
for Unlicensed-National Information Infrastructure Devices Operating in the 5.25 – 5.35 GHz and 5.47 – 5.725 GHz Bands Incorporating
Dynamic Frequency Selection. Test results reported herein relate only to the item(s) tested.
I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the
qualifications of all persons taking them.
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 1 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
T A B L E
1.0
2.0
3.0
4.0
O F
C O N T E N T S
INTRODUCTION .......................................................................................................................................... 3
1.1
Scope ................................................................................................................................................................... 3
1.2
Evaluation Procedure ........................................................................................................................................... 3
1.3
Summary of Test Results ..................................................................................................................................... 3
PRODUCT INFORMATION.......................................................................................................................... 4
2.1
Equipment Description ......................................................................................................................................... 4
2.2
EUT Capabilities ................................................................................................................................................... 4
2.3
Modifications ........................................................................................................................................................ 4
DESCRIPTION OF DYNAMIC FREQUENCY SELECTION TEST .............................................................. 5
3.1
Applicability .......................................................................................................................................................... 5
3.2
Requirements ....................................................................................................................................................... 5
3.3
DFS Detection Threshold Values ......................................................................................................................... 7
3.4
Parameters of DFS Test Signals .......................................................................................................................... 7
3.5
Procedure ............................................................................................................................................................. 8
TEST EQUIPMENT ...................................................................................................................................... 9
4.1
Additional Equipment............................................................................................................................................ 9
5.0
TEST RESULTS ......................................................................................................................................... 10
6.0
CONCLUSION ............................................................................................................................................ 14
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 2 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
1.0 I N T R O D U C T I O N
1.1 Scope
This report has been prepared to demonstrate compliance with the requirements for Dynamic Frequency
Selection (DFS) as stated in KDB 905462 D02 v02. Testing was performed on the Samsung Portable Handset
FCC ID: A3LSMA730F. As of July 20, 2007 all devices operating in the 5250 – 5350 MHz and/or the 5470 –
5725 MHz bands must comply with the DFS requirements. As the EUT does not have radar detection capability it
was evaluated as a Client Only Device. All test results reported herein are applicable to the sample selected for
testing. The unit used for testing was supplied by Samsung Electronics Co., Ltd..
1.2 Evaluation Procedure
Conducted test methodology was used for the DFS evaluation procedure of the EUT. No deviations to the test
procedure and test methods occurred during the evaluation of the EUT.
1.3 Summary of Test Results
The EUT was found to be compliant with the requirements for DFS as required for a Client Device per Part
15.407(h), RSS-247 and KDB 905462 D02 v02. The following table lists the measured parameters. The actual
data and plots can be found in Section 5 and 6 of this report.
Limit
Result
5260 – 5320 MHz
UNII – 2A Band
Measured
Channel Move Time
3.18 s
10 seconds
Pass
Channel Closing Transmission Time
< 200ms
+ 3.07 ms (aggregate)
200ms + aggregate of
60ms over remaining
10 second period
Pass
Client beacon test
Monitored for 10
minutes with no client
transmission
No client transmission
occurred
Pass
5470 – 5725 MHz
UNII – 2C Band
Parameter
Channel Move Time
3.23 s
10 seconds
Pass
Channel Closing Transmission Time
< 200ms
+ 7.48 ms (aggregate)
200ms + aggregate of
60ms over remaining
10 second period
Pass
Client beacon test
Monitored for 10
No client transmission
minutes with no client
occurred
transmission
Table 1-1. DFS Test Results Summary
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Pass
Approved by:
Quality Manager
Page 3 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
2.0 P R O D U C T I N F O R M A T I O N
2.1 Equipment Description
The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMA730F.
Mode of Operation:
Master Device
Client Device (No radar detection)
Client Device with Radar Detection
Parameters of EUT:
5260 – 5320 MHz
5500 – 5720 MHz
Frequency
34.754 mW (15.41 dBm) Conducted (802.11ac UNII Band 2A)
Output Power:
35.400 mW (15.49 dBm) Conducted (802.11ac UNII Band 2C)
Modulation:
OFDM
Channel Bandwidth:
20, 40, 80 MHz
Table 2-1. Parameters of EUT
Test Device Serial No.: 29396
2.2 EUT Capabilities
This device contains the following capabilities:
850/1900 GSM/GPRS/EDGE, 850/1700/1900 WCDMA, Multi-band LTE, 802.11b/g/n WLAN, 802.11a/n/ac UNII,
Bluetooth (1x, EDR, LE), NFC, ANT+
2.3 Modifications
No modifications to the EUT were required in order to comply with the DFS specifications.
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 4 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
3.0 D E S C R I P T I O N O F D Y N A M I C F R E Q U E N C Y S E L E C T I O N T E S T
3.1 Applicability
The following table from KDB 905462 D02 v02 lists the applicable requirements for the DFS testing. The device
evaluated in this report is considered a client device without radar detection capability.
Requirement
Operational Mode
Master
Client Without
Radar Detection
Client With Radar
Detection
Non-Occupancy Period
Yes
Not required
Yes
DFS Detection Threshold
Yes
Not required
Yes
Channel Availability Check Time
Yes
Not required
Not required
Uniform Spreading
Yes
Not required
Not required
U-NII Detection Bandwidth
Yes
Not required
Yes
Table 3-1. DFS Applicability
Requirement
Operational Mode
Master
Client
Without Radar
Detection
Client
With Radar
Detection
DFS Detection Threshold
Yes
Not required
Yes
Channel Closing Transmission Time
Yes
Yes
Yes
Channel Move Time
Yes
Yes
Yes
U-NII Detection Bandwidth
Yes
Not required
Yes
Client Beacon Test
N/A
Yes
Yes
Table 3-2. DFS Applicability During Normal Operation
3.2 Requirements
Per KDB 905462 D02 v02 the following are the requirements for Client Devices:
a) A Client Device will not transmit before having received appropriate control signals from a Master Device.
b) A Client Device will stop all its transmissions whenever instructed by a Master Device to which it is associated
and will meet the Channel Move Time and Channel Closing Transmission Time requirements.
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 5 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
The Client Device will not resume any transmissions until it has again received control signals from a Master
Device.
c) If a Client Device is performing In-Service Monitoring and detects a Radar Waveform above the DFS Detection
Threshold, it will inform the Master Device. This is equivalent to the Master Device detecting the Radar
Waveform and d) through f) of section 5.1.1 apply.
d) Irrespective of Client Device or Master Device detection the Channel Move Time and Channel Closing
Transmission Time requirements remain the same.
Channel Move Time and Channel Closing Transmission Time requirements are listed in the following table.
Parameter
Value
Non-occupancy period
Minimum 10 minutes
Channel Availability Check Time
60 seconds
10 seconds
Channel Move Time
See Note 1.
200 milliseconds + an
Channel Closing Transmission Time
aggregate of 60 milliseconds over
remaining 10 second period. See Notes
1 and 2.
Minimum 80% of the UNII 99% transmission
power bandwidth. See Note 3.
U-NII Detection Bandwidth
Note 1: The instant that the Channel Move Time and the Channel Closing Transmission Time begins is
as follows:
• For the Short Pulse Radar Test Signals this instant is the end of the Burst.
• For the Frequency Hopping radar Test Signal, this instant is the end of the last radar
Burst generated.
• For the Long Pulse Radar Test Signal this instant is the end of the 12 second period
defining the Radar Waveform.
Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at
the beginning of the Channel Move Time plus any additional intermittent control signals required
to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10
second period. The aggregate duration of control signals will not count quiet periods in between
transmissions.
Note 3: During the U-NII Detection Bandwidth detection test, radar type 1 is used and for each
frequency step the minimum percentage of detection is 90 percent. Measurements are performed
with no data traffic.
Table 3-3: DFS Response Requirements
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 6 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
3.3 DFS Detection Threshold Values
The DFS detection thresholds are defined for Master devices and Client Devices with In-service monitoring.
These detection thresholds are listed in the following table.
Maximum Transmit Power
Value
(See Notes 1 and 2)
≥ 200 milliwatt
-64 dBm
< 200 milliwatt
-62 dBm
Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna.
Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of
the test transmission waveforms to account for variations in measurement equipment. This will
ensure that the test signal is at or above the detection threshold level to trigger a DFS response.
Table 3-4: Detection Thresholds for Master Devices and Client Devices with Radar Detection
3.4 Parameters of DFS Test Signals
As the EUT is a Client Device with no Radar Detection only one type radar pulse is required for the testing.
Radar Pulse type 1 was used in the evaluation of the Client device for the purpose of measuring the Channel
Move Time and the Channel Closing Transmission Time. Table 3-5 lists the parameters for the Short Pulse
Radar Waveforms. A plot of the Radar Pulse Type 1 used for testing is included in Section 5.0 of this report.
Radar Type
Pulse Width
(μsec)
PRI
(μsec)
Number
of
Pulses
Minimum
Percentage of
Successful
Detection
Minimum
Number of
Trials
1428
18
60%
30
1-5
150-230
23-29
60%
30
6-10
200-500
16-18
60%
30
11-20
200-500
12-16
60%
30
80%
120
Aggregate (Radar Types 1-4)
Table 3-5: Parameters for Short Pulse Radar Waveforms
Radar
Type
Pulse
Width
(μsec)
Chirp
Width
(MHz)
PRI
(μsec)
Number
of Pulses
per Burst
Number
of Bursts
Minimum
Percentage of
Successful
Detection
Minimum
Number of
Trials
50 - 100
5 - 20
5 – 20
1-3
8 - 20
60%
30
Table 3-6. Parameters for Long Pulse Radar Waveforms
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 7 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Radar
Type
Pulse
Width
(μsec)
PRI
(μsec)
Pulses
per
Hop
Hopping
Rate
(kHz)
333
0.333
Hopping
Minimum
Sequence Percentage of
Length
Successful
(msec)
Detection
300
70%
Minimum
Number
of
Trials
30
Table 3-7. Parameters for Frequency Hopping Radar Waveforms
3.5 Procedure
KDB 905462 D02 v02 describes a radiated test setup and a conducted test setup. The conducted test setup was
used for this testing. Figure 3-1 shows the typical test setup. In Band 2A, one channel selected between 5260
and 5350 MHz is chosen for the testing. In Band 2C, one channel selected between 5500 and 5720 MHz was
chosen for testing.
Figure 3-1. Conducted Test Setup for DFS
1. The “Aeroflex PXI DFS Radar Simulator and Analyzer Test Suite” is setup to provide a simulated radar
pulse at the frequency that the Master and Client are operating. A Type 0 radar pulse was used.
2. The Client Device (EUT) is set up per the diagram in Figure 3-1 and communications between the Master
device and the Client is established.
3. An MPEG or data file that is typical for the device is streamed from the Master to the Client to properly
load the network.
4. The “Aeroflex PXI DFS Radar Simulator and Analyzer Test Suite” is set to record and display 12 seconds
of time, starting from where the simulated radar is generated. This time domain plot captures any
transmissions occurring up to and after 10sec. Aggregate time is computed to ensure compliance. (Note:
the channel may be different since the Master and Client have changed channels due to the detection of
the initial radar pulse.)
5. After the initial radar burst the channel is monitored for 10 minutes to ensure no transmissions or beacons
occur. A second monitoring setup is used to verify that the Master and Client have both moved to
different channels.
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 8 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
4.0 T E S T E Q U I P M E N T
Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.52006.
Manufacturer
Model
Description
Cal Date
Cal Interval
Cal Due
Serial Number
Aeroflex
Aeroflex
Agilent
Seekonk
PXI 82531
PXI 82531
N9038A
NC‐100
PXI RF Synthesizer
PXI DFS Radar Simulator & Analyzer
MXE EMI Receiver
Torque Wrench 5/16", 8" lbs
9/22/2016
9/22/2016
4/26/2017
3/2/2016
Biennial
Biennial
Annual
Biennial
9/22/2018
9/22/2018
4/26/2018
3/2/2018
1082329
1082329
MY51210133
N/A
Table 4-1. Annual Test Equipment Calibration Schedule
Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date range,
care was taken to ensure that this equipment was used after the calibration date and before the calibration due
date.
4.1 Additional Equipment
The following equipment was used in support of the DFS testing.
Device
Master
Manufacturer
Model/Description
Description
S/N:
AIR-CAP2702E-A-K9
Access Point
FTX1834S05B
AIR-CT2504-K9 V03
Controller
PSZ18381P6K
Cisco Systems
Table 4-2. Support Equipment
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 9 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
5.0 T E S T R E S U L T S
Channel Loading Notes:
Per KDB 905462 D02 v02, timing plots are required with calculations demonstrating a minimum channel loading
of approximately 17% or greater. For example, you can zero span the spectrum analyzer and approximate the
transmission time.
Figure 5-1. Band 2A Pulse Width and Period
Channel Loading = Pulse Width / Period = 34 µs / 86 µs = 39.5 %
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 10 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Figure 5-2. Band 2C Pulse Width and Period
Channel Loading = Pulse Width / Period = 36 µs / 88 µs = 40.9 %
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 11 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Move Time and Aggregate Time Notes:
1. Trigger Threshold was configured to only capture client pulses. The pulses shown in the plots below
have been determined to be from the Master AP.
2. Marker Info and Aggregate time results are shown on the right side of the plots below.
Figure 5-3. Band 2A Move Time and Aggregate Time
Figure 5-4. Band 2C Move Time and Aggregate Time
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 12 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Figure 5-5. Band 2A Client Beacon Test – Monitoring live spectrum – Elapse time 10 minutes
Figure 5-6. Band 2C Client Beacon Test – Monitoring live spectrum – Elapse time 10 minutes
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 13 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
6.0 C O N C L U S I O N
The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
FCC ID: A3LSMA730F is in compliance with the DFS requirements for a Client Device without radar detection in
accordance with Part 15.407 of the FCC Rules.
MEASUREMENT REPORT
(CERTIFICATION)
FCC ID: A3LSMA730F
Test Report S/N:
Test Dates:
EUT Type:
1M1710050266-06.A3L
10/5-11/3/2017
Portable Handset
Approved by:
Quality Manager
Page 14 of 14
© 2017 PCTEST Engineering Laboratory, Inc.
V 7 9/25/2017
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Download: SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Document ID3633966
Application IDKk1CSAgjHYhi9NhG1bGcDQ==
Document DescriptionDFS Test Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize49.73kB (621685 bits)
Date Submitted2017-11-09 00:00:00
Date Available2017-11-09 00:00:00
Creation Date2017-10-31 20:32:59
Producing SoftwareAcrobat Distiller 15.0 (Windows)
Document Lastmod2017-11-09 14:42:42
Document TitleDFS Test Report
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:10:31 20:32:59-04:00
Modify Date                     : 2017:11:09 14:42:42-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Producer                        : Acrobat Distiller 15.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:11:09 14:42:42-05:00
Format                          : application/pdf
Title                           : Microsoft Word - MASTER RF DFS Dual Band Test Report
Creator                         : 
Document ID                     : uuid:a56dcb6b-899d-4e9d-9168-a11ef5617f57
Instance ID                     : uuid:854ced66-8f20-44f1-8be9-bb93c260a7c5
Page Count                      : 14
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017