SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

FCC ID Filing: A3LSMA730F
Purchase on Amazon: Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 2 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 3 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 4 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 5 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 6 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 7 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 8 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 9 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 10 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 11 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 12 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 13 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 14 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 15 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 16 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 17 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Page 18 of SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd

PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21046 USA
Tel. 410.290.6652 / Fax 410.290.6654
http://www.pctest.com
MEASUREMENT REPORT
GSM / GPRS / EDGE
Date of Testing:
11/14/2017
Test Site/Location:
PCTEST Lab. Columbia, MD, USA
Test Report Serial No.:
1M1711130296-02.A3L
Applicant Name:
Samsung Electronics Co., Ltd.
129, Samsung-ro,
Yeongtong-gu, Suwon-si
Gyeonggi-do, 16677, Korea
FCC ID:
A3LSMA730F
APPLICANT:
Samsung Electronics Co., Ltd.
Application Type:
Model:
Additional Model(s):
EUT Type:
FCC Classification:
FCC Rule Part(s):
Test Procedure(s):
Class II Permissive Change
SM-A730F/DS
SM-A730F
Portable Handset
PCS Licensed Transmitter Held to Ear (PCE)
Part 22
ANSI C63.26-2015, ANSI/TIA-603-E-2016, KDB 971168 D01 v03
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report
and was tested in accordance with the measurement procedures specified in §2.947. Test results reported herein relate only to the item(s)
tested.
I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the
qualifications of all persons taking them.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 1 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
T A B L E
1.0
2.0
3.0
O F
C O N T E N T S
INTRODUCTION ........................................................................................................................................... 4
1.1
Scope ................................................................................................................................................................. 4
1.2
PCTEST Test Location ....................................................................................................................................... 4
1.3
Test Facility / Accreditations ............................................................................................................................... 4
PRODUCT INFORMATION........................................................................................................................... 5
2.1
Equipment Description ....................................................................................................................................... 5
2.2
Device Capabilities ............................................................................................................................................. 5
2.3
Test Configuration .............................................................................................................................................. 5
2.4
EMI Suppression Device(s)/Modifications .......................................................................................................... 5
DESCRIPTION OF TESTS ........................................................................................................................... 6
3.1
Evaluation Procedure ......................................................................................................................................... 6
3.2
Cellular - Base Frequency Blocks ...................................................................................................................... 6
3.3
Cellular - Mobile Frequency Blocks .................................................................................................................... 6
3.4
Radiated Measurements .................................................................................................................................... 7
4.0
MEASUREMENT UNCERTAINTY ................................................................................................................ 8
5.0
TEST EQUIPMENT CALIBRATION DATA ................................................................................................... 9
6.0
SAMPLE CALCULATIONS ......................................................................................................................... 10
7.0
TEST RESULTS .......................................................................................................................................... 11
8.0
7.1
Summary .......................................................................................................................................................... 11
7.2
Radiated Power (ERP/EIRP) ............................................................................................................................ 12
7.3
Radiated Spurious Emissions Measurements .................................................................................................. 15
CONCLUSION ............................................................................................................................................. 18
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 2 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
MEASUREMENT REPORT
GSM / GPRS / EDGE
ERP
Mode
FCC Rule
Part
Tx Frequency (MHz)
GPRS850
22H
824.2 - 848.8
EIRP
Max.
Power
(W)
Max.
Power
(dBm)
Max.
Power
(W)
Max.
Power
(dBm)
Emission
Designator
0.617
27.90
1.013
30.05
243KGXW
EUT Overview
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 3 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
1.0
1.1
INTRODUCTION
Scope
Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including
intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal
Communications Commission and the Innovation, Science and Economic Development Canada.
1.2
PCTEST Test Location
These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 7185
Oakland Mills Road, Columbia, MD 21046. The facility is 0.4 miles North of the FCC laboratory, and the ambient
signal and ambient signal strength are approximately equal to those of the FCC laboratory. The measurement
facility is compliant with the test site requirements specified in ANSI C63.4-2014.
1.3
Test Facility / Accreditations
Measurements were performed at PCTEST Engineering Lab located in Columbia, MD 21046, U.S.A.

PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory
Accreditation (A2LA) with Certificate number 2041.01 for Specific Absorption Rate (SAR), Hearing Aid
Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and
Innovation, Science, and Economic Development Canada rules.

PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
(Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS).

PCTEST facility is a registered (22831) test laboratory with the site description on file with ISED.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 4 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
2.0
2.1
PRODUCT INFORMATION
Equipment Description
The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMA730F. The test data
contained in this report pertains only to the emissions due to the EUT’s 2G/3G licensed transmitters.
Test Device Serial No.: 12531
2.2
Device Capabilities
This device contains the following capabilities:
850/1900 GSM/GPRS/EDGE, 850/1700/1900 WCDMA, Multi-band LTE, 802.11b/g/n WLAN, 802.11a/n/ac UNII,
Bluetooth (1x, EDR, LE), NFC, ANT+
2.3
Test Configuration
The EUT was tested per the guidance of ANSI/TIA-603-E-2016 and KDB 971168 D01 v03. See Section 7.0 of this
test report for a description of the radiated and antenna port conducted emissions tests.
2.4
EMI Suppression Device(s)/Modifications
No EMI suppression device(s) were added and no modifications were made during testing.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 5 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
3.0
DESCRIPTION OF TESTS
3.1
Evaluation Procedure
The measurement procedures described in the “Land Mobile FM or PM – Communications Equipment –
Measurements and Performance Standards” (ANSI/TIA-603-E-2016) and “Measurement Guidance for
Certification of Licensed Digital Transmitters” (KDB 971168 D01 v03) were used in the measurement of the EUT.
Deviation from Measurement Procedure…………………………………………………………………..None
3.2
Cellular - Base Frequency Blocks
§22.905
A*
Low
869
880
A*
High
B*
890
894
BLOCK 1: 869 – 880 MHz (A* Low + A)
BLOCK 3: 890 – 891.5 MHz (A* High)
BLOCK 2: 880 – 890 MHz (B)
BLOCK 4: 891.5 – 894 MHz (B*)
3.3
Cellular - Mobile Frequency Blocks
§22.905
A*
Low
824
835
A*
High
B*
845
849
BLOCK 1: 824 – 835 MHz (A* Low + A)
BLOCK 3: 845 – 846.5 MHz (A* High)
BLOCK 2: 835 – 845 MHz (B)
BLOCK 4: 846.5 – 849 MHz (B*)
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 6 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
3.4
Radiated Measurements
§2.1053 §22.913(a.2) §22.917(a)
The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements
and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic
chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m
elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are
arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction
of reflections for measurements above 1GHz. For measurements below 1GHz, the absorbers are removed. A
raised turntable is used for radiated measurement. The turn table is a continuously rotatable, remote-controlled,
metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in
order to maintain its function as a ground plane. An 80cm tall test table made of Styrodur is placed on top of the
turn table. A Styrodur pedestal is placed on top of the test table to bring the total table height to 1.5m.
The equipment under test was transmitting while connected to its integral antenna and is placed on a turntable 3
meters from the receive antenna. The receive antenna height is adjusted between 1 and 4 meter height, the
turntable is rotated through 360 degrees, and the EUT is manipulated through all orthogonal planes
representative of its typical use to achieve the highest reading on the receive spectrum analyzer.
Per the guidance of ANSI/TIA-603-E-2016, a half-wave dipole is then substituted in place of the EUT. For
emissions above 1GHz, a horn antenna is substituted in place of the EUT. The substitute antenna is driven by a
signal generator with the level of the signal generator being adjusted to obtain the same receive spectrum
analyzer level previously recorded from the spurious emission from the EUT. The power of the emission is
calculated using the following formula:
Pd [dBm] = Pg [dBm] – cable loss [dB] + antenna gain [dBd/dBi]
Where, Pd is the dipole equivalent power, Pg is the generator output into the substitution antenna, and the
antenna gain is the gain of the substitute antenna used relative to either a half-wave dipole (dBd) or an isotropic
source (dBi). The substitute level is equal to Pg [dBm] – cable loss [dB].
Radiated power and radiated spurious emission levels are investigated with the receive antenna horizontally and
vertically polarized per ANSI/TIA-603-E-2016.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 7 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
4.0
MEASUREMENT UNCERTAINTY
The measurement uncertainties shown below were calculated in accordance with the requirements of
ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a
95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement
uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine
compliance.
Contribution
Expanded Uncertainty (±dB)
Conducted Bench Top
Measurements
1.13
Radiated Disturbance (<1GHz)
4.98
Radiated Disturbance (>1GHz)
5.07
Radiated Disturbance (>18GHz)
5.09
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 8 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
5.0
TEST EQUIPMENT CALIBRATION DATA
Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
Measurements antennas used during testing were calibrated in accordance to the requirements of
ANSI C63.5-2017.
Manufacturer
Model
Description
Cal Date
‐
RE1
Radiated Emissions Cable Set (UHF/EHF) 6/21/2017
Agilent
N9030A
PXA Signal Analyzer (26.5GHz)
8/28/2017
Agilent
N5183A
MXG Analog Signal Generator
2/24/2016
Anritsu
MT8820C
Radio Communication Analyzer
5/23/2017
Com‐Power
AL‐130
9kHz ‐ 30MHz Loop Antenna
10/10/2017
ETS Lindgren
3117
1‐18 GHz DRG Horn (Medium)
12/1/2016
Mini Circuits
TVA‐11‐422
RF Power Amp
Mini Circuits
PWR‐SEN‐4GHS
USB Power Sensor
3/24/2017
Mini‐Circuits
SSG‐4000HP
Synthesized Signal Generator
Rhode & Schwarz
TC‐TA18
Cross‐Pol Antenna (400MHz ‐ 18GHz)
10/30/2017
Rohde & Schwarz
FSW67
Signal / Spectrum Analyzer
8/11/2017
Rohde & Schwarz
SFUNIT‐Rx
Shielded Filter Unit
7/3/2017
Schwarzbeck
UHA 9105
Dipole Antenna (400 ‐ 1GHz) Tx
8/26/2016
Seekonk
NC‐100
Torque Wrench 5/16", 8" lbs
3/2/2016
Cal Interval
Annual
Annual
Biennial
Annual
Biennial
Biennial
N/A
Annual
N/A
Annual
Annual
Annual
Biennial
Biennial
Cal Due
Serial Number
6/21/2018
RE1
8/28/2018 MY49432391
2/24/2018 MY50141900
5/23/2018 6201240328
10/10/2019
121034
12/1/2018
125518
QA1317001
3/24/2018 11401010036
11208010032
10/30/2018
101058
8/11/2018
103200
7/3/2018
102135
8/26/2018
2696
3/2/2018
N/A
Table 5-1. Test Equipment
Notes:
Equipment with a calibration date of “N/A” shown in this list was not used to make direct calibrated
measurements.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 9 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
6.0
SAMPLE CALCULATIONS
GPRS Emission Designator
Emission Designator = 250KGXW
GPRS BW = 250 kHz
G = Phase Modulation
X = Cases not otherwise covered
W = Combination (Audio/Data)
Spurious Radiated Emission
Example: Spurious emission at 3700.40 MHz
The receive spectrum analyzer reading at 3 meters with the EUT on the turntable was –81.0 dBm. The gain of the
substituted antenna is 8.1 dBi. The signal generator connected to the substituted antenna terminals is adjusted to
produce a reading of –81.0 dBm on the spectrum analyzer. The loss of the cable between the signal generator
and the terminals of the substituted antenna is 2.0 dB at 3700.40 MHz. So 6.1 dB is added to the signal generator
reading of –30.9 dBm yielding –24.80 dBm. The fundamental EIRP was 25.50 dBm so this harmonic was 25.50
dBm – (-24.80) = 50.3 dBc.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 10 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
7.0
TEST RESULTS
7.1
Summary
Company Name:
Samsung Electronics Co., Ltd.
FCC ID:
A3LSMA730F
FCC Classification:
PCS Licensed Transmitter Held to Ear (PCE)
Mode(s):
GSM / GPRS / EDGE
FCC Part
Section(s)
22.913(a)(2)
RSS
Section(s)
RSS-132(5.4)
Test Description
Effective Radiated
Power
Test Limit
Test
Condition
< 7 Watts max. ERP
Test
Result
Reference
PASS
Section 7.2
PASS
Section 7.3
RADIATED
22.917(a)
RSS-132(5.5)
Radiated Spurious
Emissions
> 43 + log10 (P[Watts]) for all
out-of-band emissions
Table 7-1. Summary of Test Results
Notes:
All modes of operation and data rates were investigated. The test results shown in the following sections
represent the worst-case emissions.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 11 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
7.2
Radiated Power (ERP/EIRP)
§22.913(a)(2) 24.232(c) RSS-132(5.4)
Test Overview
Effective Radiated Power (ERP) and Equivalent Isotropic Radiated Power (EIRP) measurements are performed
using the substitution method described in ANSI/TIA-603-E-2016 with the EUT transmitting into an integral
antenna. Measurements on signals operating below 1GHz are performed using vertically and horizontally
polarized tuned dipole antennas. Measurements on signals operating above 1GHz are performed using vertically
and horizontally polarized broadband horn antennas. All measurements are performed as RMS average
measurements while the EUT is operating at maximum power, and at the appropriate frequencies.
Test Procedures Used
KDB 971168 D01 v03 – Section 5.2.1
ANSI/TIA-603-E-2016 – Section 2.2.17
Test Settings
1. Radiated power measurements are performed using the signal analyzer’s “channel power” measurement
capability for signals with continuous operation. For signals with burst transmission, the signal analyzer’s
“time domain power” measurement capability is used
2. RBW = 1 – 5% of the expected OBW, not to exceed 1MHz
3. VBW ≥ 3 x RBW
4. Span = 1.5 times the OBW
5. No. of sweep points > 2 x span / RBW
6. Detector = RMS
7. Trigger is set to “free run” for signals with continuous operation with the sweep times set to “auto”. Trigger
is set to enable triggering only on full power bursts with the sweep time set less than or equal to the
transmission burst duration
8. The integration bandwidth was roughly set equal to the measured OBW of the signal for signals with
continuous operation. For signals with burst transmission, the “gating” function was enabled to ensure
that measurements are performed during times in which the transmitter is operating at its maximum
power
9. Trace mode = trace averaging (RMS) over 100 sweeps
10. The trace was allowed to stabilize
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 12 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Test Setup
The EUT and measurement equipment were set up as shown in the diagram below.
Figure 7-1. Radiated Test Setup
Test Notes
1) This device employs GSM, GPRS, and EDGE capabilities. The EUT was tested under all configurations
and the highest power is reported in GPRS mode while transmitting with one slot active.
2) This unit was tested with its standard battery.
3) The EUT was tested in three orthogonal planes and in all possible test configurations and positioning.
The worst case setup is reported in the tables below.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 13 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Radiated Power (ERP/EIRP) (Cont’d)
§22.913(a)(2) 24.232(c) RSS-132(5.4)
Ant. Antenna Turntable Substitute Ant.
Gain
Height
Azimuth
Pol.
Level
[dBi]
[cm]
[degree]
[H/V]
[dBm]
ERP
[dBm]
ERP
[Watts]
ERP
Limit
[dBm]
Margin
[dB]
EIRP
[dBm]
EIRP
[Watts]
EIRP
Limit
[dBm]
Margin
[dB]
1.50
27.62
0.578
38.45
-10.83
29.77
0.948
40.61
-10.84
28.37
1.50
27.72
0.591
38.45
-10.74
29.87
0.969
40.61
-10.74
28.55
1.50
27.90
0.617
38.45
-10.55
30.05
1.013
40.61
-10.55
Frequency
[MHz]
Mode
824.20
GPRS850
150
33
28.27
836.60
GPRS850
150
34
848.80
GPRS850
150
40
Table 7-2. ERP/EIRP (Cellular GPRS)
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 14 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
7.3
Radiated Spurious Emissions Measurements
§2.1053 §22.917(a)RSS-132(5.5)
Test Overview
Radiated spurious emissions measurements are performed using the substitution method described in ANSI/TIA603-E-2016 with the EUT transmitting into an integral antenna. Measurements on signals operating below 1GHz
are performed using horizontally and vertically polarized tuned dipole antennas. Measurements on signals
operating above 1GHz are performed using vertically and horizontally polarized broadband horn antennas. All
measurements are performed as peak measurements while the EUT is operating at maximum power, and at the
appropriate frequencies.
Test Procedures Used
KDB 971168 D01 v03 – Section 5.8
ANSI/TIA-603-E-2016 – Section 2.2.12
Test Settings
1. RBW = 100kHz for emissions below 1GHz and 1MHz for emissions above 1GHz
2. VBW ≥ 3 x RBW
3. Span = 1.5 times the OBW
4. No. of sweep points > 2 x span / RBW
5. Detector = RMS
6. Trace mode = Average (Max Hold for pulsed emissions)
7. The trace was allowed to stabilize
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 15 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Test Setup
The EUT and measurement equipment were set up as shown in the diagram below.
Figure 7-2. Test Instrument & Measurement Setup
Test Notes
1) This device employs GSM, GPRS, and EDGE capabilities. The EUT was tested under all configurations
and the highest power is reported in GPRS mode while transmitting with one slot active.
2) This unit was tested with its standard battery.
3) The EUT was tested in three orthogonal planes and in all possible test configurations and positioning.
The worst-case setup is reported in the tables below.
4) The spectrum is measured from 9kHz to the 10th harmonic of the fundamental frequency of the
transmitter. The worst-case emissions are reported.
5) Emissions below 18GHz were measured at a 3-meter test distance while emissions above 18GHz were
measured at a 1 meter test distance with the application of a distance correction factor.
6) The "-" shown in the following RSE tables are used to denote a noise floor measurement.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 16 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Cellular GPRS Mode
824.20
OPERATING FREQUENCY:
128
CHANNEL:
MODULATION SIGNAL:
GPRS (GMSK)
DISTANCE:
LIMIT:
MHz
-13
Ant. Antenna Turntable
Level at
Frequency
Azimuth
Pol. Height
Antenna
[MHz]
[cm]
[degree] Terminals [dBm]
[H/V]
meters
dBm
Substitute
Antenna Gain
[dBi]
Spurious
Emission Level
[dBm]
Margin
[dB]
1648.40
150
-60.99
4.81
-56.18
-43.2
2472.60
150
17
-61.62
4.99
-56.63
-43.6
3296.80
150
-59.55
6.24
-53.30
-40.3
4121.00
150
324
-60.78
7.57
-53.21
-40.2
4945.20
-60.34
8.37
-51.97
-39.0
Table 7-3. Radiated Spurious Data (Cellular GPRS Mode – Ch. 128)
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 17 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
8.0
CONCLUSION
The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
FCC ID: A3LSMA730F complies with all the requirements of Part 22 of the FCC Rules.
MEASUREMENT REPORT
(CLASS II PERMISSIVE CHANGE)
FCC ID: A3LSMA730F
Test Report S/N:
1M1711130296-02.A3L
Test Dates:
11/14/2017
EUT Type:
Portable Handset
Approved by:
Quality Manager
Page 18 of 18
© 2017 PCTEST Engineering Laboratory, Inc.
V7
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact [email protected]
Download: SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMA730F Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Document ID3645953
Application IDa2VLfl+cAOfzJyA0DdtMZw==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeYes
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize31.33kB (391589 bits)
Date Submitted2017-11-20 00:00:00
Date Available2017-11-20 00:00:00
Creation Date2017-11-15 14:14:19
Producing SoftwareAcrobat Distiller 17.0 (Windows)
Document Lastmod2017-11-20 12:03:30
Document TitleTest Report
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2017:11:15 14:14:19-05:00
Modify Date                     : 2017:11:20 12:03:30-05:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Format                          : application/pdf
Creator                         : 
Title                           : Microsoft Word - A3LSMA730F C2PC RF 2G3G Test Report
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:11:20 12:03:30-05:00
Producer                        : Acrobat Distiller 17.0 (Windows)
Document ID                     : uuid:bf94b35a-5608-4d3c-ac40-8f512560f872
Instance ID                     : uuid:f0d0c0dd-c112-4e8d-a13d-c0ce3868cfc7
Page Count                      : 18
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017