SMG973U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Alternate Views: PDF [Zoom] Download [PDF]

                                        PCTEST ENGINEERING LABORATORY, INC.
                                                        7185 Oakland Mills Road, Columbia, MD 21046 USA
                                                              Tel. 410.290.6652 / Fax 410.290.6654
                                                                      http://www.pctest.com

                                                               MEASUREMENT REPORT
                                                     FCC PART 15.249 / ISED RSS-210 ANT+

  Applicant Name:                                                                                Date of Testing:
  Samsung Electronics Co., Ltd.                                                                  10/23 - 12/19/2018
  129, Samsung-ro,                                                                               Test Site/Location:
  Yeongtong-gu, Suwon-si                                                                         PCTEST Lab. Columbia, MD, USA
  Gyeonggi-do, 16677, Korea                                                                      Test Report Serial No.:
                                                                                                 1M1810250195-10.A3L


  FCC ID:                                                            A3LSMG973U
  IC:                                                                649E-SMG973U
  APPLICANT:                                                         Samsung Electronics Co., Ltd.



  Application Type:                                                  Certification
  Model:                                                             SM-G973U
  Additional Model(s):                                               SM-G973U1, SM-G973W, SM-G973XU
  HVIN:                                                              SM-G973W
  EUT Type:                                                          Portable Handset
  Frequency Range:                                                   2402 – 2480MHz
  FCC Classification:                                                Low Power Communications Device Transmitter (DXX)
  FCC Rule Part(s):                                                  Part 15 Subpart C (15.249)
  ISED Specification:                                                RSS-210 Issue 9
  Test Procedure(s):                                                 ANSI C63.10-2013, KDB 648474 D03 v01r04




  This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report
  and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate only to
  the item(s) tested.

  I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
  correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the
  qualifications of all persons taking them.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 1 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


                                               T A B L E                        O F             C O N T E N T S



1.0          INTRODUCTION .......................................................................................................................................... 3
             1.1      Scope ................................................................................................................................................................... 3
             1.2      PCTEST Test Location ......................................................................................................................................... 3
             1.3      Test Facility / Accreditations ................................................................................................................................. 3
2.0          PRODUCT INFORMATION.......................................................................................................................... 4
             2.1      Equipment Description ......................................................................................................................................... 4
             2.2      Device Capabilities ............................................................................................................................................... 4
             2.3      Test Configuration ................................................................................................................................................ 4
             2.4      EMI Suppression Device(s)/Modifications ............................................................................................................ 4
3.0          DESCRIPTION OF TESTS .......................................................................................................................... 5
             3.1      Evaluation Procedure ........................................................................................................................................... 5
             3.2      AC Line Conducted Emissions ............................................................................................................................. 5
             3.3      Radiated Emissions .............................................................................................................................................. 6
             3.4      Environmental Conditions..................................................................................................................................... 6
4.0          ANTENNA REQUIREMENTS ...................................................................................................................... 7
5.0          MEASUREMENT UNCERTAINTY ............................................................................................................... 8
6.0          TEST EQUIPMENT CALIBRATION DATA .................................................................................................. 9
7.0          TEST RESULTS ......................................................................................................................................... 10
             7.1      Summary ............................................................................................................................................................ 10
             7.2      Occupied Bandwidth Measurement .................................................................................................................... 11
             7.3      Duty Cycle Calculation ....................................................................................................................................... 12
             7.4      Fundamental Field Strength Level Measurement ............................................................................................... 14
             7.5      Radiated Spurious Emission Measurements ...................................................................................................... 15
             7.6      Radiated Restricted Band Edge Measurements ................................................................................................. 19
             7.7      Line Conducted Measurement Data ................................................................................................................... 20
8.0          CONCLUSION ............................................................................................................................................ 24




                                                                                 MEASUREMENT REPORT                                                                Approved by:
FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                                Quality Manager
Test Report S/N:                       Test Dates:                     EUT Type:
                                                                                                                                                                   Page 2 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


1.0           INTRODUCTION

 1.1           Scope
 Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including
 intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal
 Communications Commission and the Innovation, Science and Economic Development Canada.

 1.2           PCTEST Test Location
 These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at 7185
 Oakland Mills Road, Columbia, MD 21046. The measurement facility is compliant with the test site requirements
 specified in ANSI C63.4-2014.

 1.3           Test Facility / Accreditations
 Measurements were performed at PCTEST Engineering Lab located in Columbia, MD 21046, U.S.A.

      PCTEST is an ISO 17025-2005 accredited test facility under the American Association for Laboratory
       Accreditation (A2LA) with Certificate number 2041.01 for Specific Absorption Rate (SAR), Hearing Aid
       Compatibility (HAC) testing, where applicable, and Electromagnetic Compatibility (EMC) testing for FCC and
       Innovation, Science, and Economic Development Canada rules.

      PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC 17065-2012 by A2LA
       (Certificate number 2041.03) in all scopes of FCC Rules and ISED Standards (RSS).

      PCTEST facility is a registered (2451B) test laboratory with the site description on file with ISED.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 3 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


2.0           PRODUCT INFORMATION

 2.1           Equipment Description
 The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMG973U. The test data
 contained in this report pertains only to the emissions due to the EUT’s ANT+ transmitter.

 Test Device Serial No.: 0050M, 0162M, 1083M, 0160M

 2.2           Device Capabilities
 This device contains the following capabilities:

 800/850/1900 CDMA (BC0, BC1, BC10), 850/1900 GPRS/EDGE, 850/1700/1900 WCDMA/HSPA, Multi-band
 LTE, 802.11b/g/n/ax-SU WLAN, 802.11a/n/ac/ax UNII, Bluetooth (1x, EDR, LE), NFC, ANT+

                                                              Ch.                      Frequency (MHz)

                                                               00                                 2402

                                                                :                                     :

                                                               39                                 2441

                                                                :                                     :

                                                               78                                 2480

                                                          Table 2-1. Frequency/ Channel Operations

 2.3           Test Configuration
 The EUT was tested per the guidance of ANSI C63.10-2013. ANSI C63.10-2013 was used to reference the
 appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. See Sections 3.2
 for AC line conducted emissions test setups, 3.3 for radiated emissions test setups, and 7.2 for antenna port
 conducted emissions test setups.

 This device supports wireless charging capability and, thus, is subject to the test requirements of KDB 648474
 D03 v01r04. Additional radiated spurious emission measurements were performed with the EUT placed flush
 against the flat surface of authorized wireless charging pad (WCP) Model:EP-N5100 while operating under
 normal conditions in a simulated call or data transmission configuration. The WCP is designed with the flat
 charging surface angled 45 degrees relative to a horizontal surface on which the WCP rests. The worst case
 radiated emissions data is shown in this report.

 2.4           EMI Suppression Device(s)/Modifications

 No EMI suppression device(s) were added and no modifications were made during testing.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 4 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


3.0           DESCRIPTION OF TESTS

 3.1           Evaluation Procedure
 The measurement procedure described in the American National Standard of Procedures for Compliance Testing
 of Unlicensed Wireless Devices (ANSI C63.10-2013) was used in the measurement of the EUT.

 Deviation from measurement procedure…………………………………………….....................................None

 3.2           AC Line Conducted Emissions
 The line-conducted facility is located inside a 10'x16'x9' shielded enclosure. The shielded enclosure is
 manufactured by ETS Lindgren RF Enclosures. The shielding effectiveness of the shielded room is in accordance
 with MIL-Std-285 or NSA 65-5. A 1m x 1.5m wooden table 80cm high is placed 40cm away from the vertical wall
 and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H Line-Impedance
 Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external
 high-current high-insertion loss power line filters. The external power line filter is an ETS Lindgren Model LPRX-
 4X30 (100dB Attenuation, 14kHz-18GHz) and the two EMI/RFI filters are ETS Lindgren Model LRW-2030-S1
 (100dB Minimum Insertion Loss, 14kHz – 10GHz). These filters attenuate ambient signal noise from entering the
 measurement lines. These filters are also bonded to the shielded enclosure.

 The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT is a
 DC-powered device, power will be derived from the source power supply it normally will be powered from and this
 supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened
 to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back edge of the test
 table. All cables were at least 40cm above the horizontal reference groundplane. Power cables for support
 equipment were routed down to the second LISN while ensuring that that cables were not draped over the second
 LISN.

 Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to
 their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and
 exploratory measurements were made to determine the frequencies producing the maximum emission from the
 EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function was set
 to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz. The EUT,
 support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Once
 the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of
 operation that produced these emissions is used for final measurements on the same test site. The analyzer is set
 to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final measurements.

 Line conducted emissions test results are shown in Section 7.7. The EMI Receiver mode of the Agilent MXE was
 used to perform AC line conducted emissions testing.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 5 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


3.3           Radiated Emissions
The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements
and exploratory measurements, when necessary. The measurement area is contained within the semi-anechoic
chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x 5.2m
elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. Absorbers are
arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction
of reflections for measurements above 1GHz. An 80cm tall test table made of Styrodur is placed on top of the turn
table. For measurements above 1GHz, an additional Styrodur pedestal is placed on top of the test table to bring
the total table height to 1.5m.

For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive
antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33 depending on
the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies
above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below 30MHz, a
calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1
meter test distance inside the semi-anechoic chamber using broadband antennas, broadband amplifiers, and
spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time
for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal
operating condition. The test set-up was placed on top of the 1 x 1.5 meter table. The EUT, support equipment,
and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution
was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration,
mode of operation, turntable azimuth, and receive antenna height was noted for each frequency found.

Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband and
horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum
analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances
with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the
height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the
maximum emission. Each emission was maximized by changing the orientation of the EUT through three
orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst-case
emissions.

All radiated measurements are performed in a chamber that meets the site requirements per ANSI C63.4-2014.
Additionally, radiated emissions below 30MHz are also validated on an Open Area Test Site to assert correlation
with the chamber measurements per the requirements of KDB 474788 D01.

3.4           Environmental Conditions
The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of 10%
to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar).




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 6 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


4.0           ANTENNA REQUIREMENTS

 Excerpt from §15.203 of the FCC Rules/Regulations:
 “An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the
 responsible party can be used with the device. The use of a permanently attached antenna or of an antenna that
 uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of
 this section.”


         The antennas of the EUT are permanently attached.

         There are no provisions for connection to an external antenna.


 Conclusion:
 The EUT complies with the requirement of §15.203.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 7 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


5.0           MEASUREMENT UNCERTAINTY

 The measurement uncertainties shown below were calculated in accordance with the requirements of
 ANSI C63.10-2013. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a
 95% level of confidence. The measurement uncertainty shown below meets or exceeds the UCISPR measurement
 uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to determine
 compliance.


                                                   Contribution                                        Expanded Uncertainty (±dB)

                                            Conducted Bench Top
                                                                                                                             1.13
                                               Measurements
                                       Line Conducted Disturbance                                                            3.09

                                     Radiated Disturbance (<1GHz)                                                            4.98

                                     Radiated Disturbance (>1GHz)                                                            5.07

                                    Radiated Disturbance (>18GHz)                                                            5.09




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 8 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


6.0           TEST EQUIPMENT CALIBRATION DATA

 Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
 Measurements antennas used during testing were calibrated in accordance to the requirements of ANSI C63.5-
 2017.

 Manufacturer                   Model                                    Description                               Cal Date       Cal Interval        Cal Due        Serial Number

        ‐                BT1                   Bluetooth Cable Set          1/23/2018                                                Annual          1/23/2019    BT1
    Agilent            N9020A                 MXA Signal Analyzer           1/24/2018                                                Annual          1/24/2019 US46470561
    Agilent            N9030A              PXA Signal Analyzer (44GHz)      5/25/2018                                                Annual          5/25/2019 MY52350166
  Com‐Power            AL‐130              9kHz ‐ 30MHz Loop Antenna       10/10/2017                                               Biennial        10/10/2019   121034
  Com‐Power           PAM‐103              Pre‐Amplifier (1‐1000MHz)        9/17/2018                                                Annual          9/17/2019   441119
  ETS‐Lindgren           3115      Double Ridged Guide Horn 750MHz ‐ 18GHz 3/28/2018                                                 Annual          3/28/2019   150693
   Pasternack          NMLC‐2        Line Conducted Emissions Cable (NM)    8/23/2018                                                Annual          8/23/2019  NMLC‐2
Rohde & Schwarz         ESU40               EMI Test Receiver (40GHz)       8/9/2018                                                 Annual          8/9/2019    100348
Rohde & Schwarz      SFUNIT‐Rx                 Shielded Filter Unit         6/18/2018                                                Annual          6/18/2019   102134
Solar Electronics 8012‐50‐R‐24‐BNC   Line Impedance Stabilization Network   8/14/2017                                               Biennial         8/14/2019   310233
      Sunol           DRH‐118                Horn Antenna (1‐18GHz)         8/11/2017                                               Biennial         8/11/2019  A050307
      Sunol              JB5              Bi‐Log Antenna (30M ‐ 5GHz)       4/19/2018                                               Biennial         4/19/2020  A051107
                                             Table 6-1. Annual Test Equipment Calibration Schedule




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 9 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.0           TEST RESULTS

 7.1           Summary

           Company Name:                                   Samsung Electronics Co., Ltd.
           FCC ID:                                         A3LSMG973U
           Method/System:                                  Low Power Communications Device Transmitter (DXX)
           Number of Channels:                             79

      FCC Part                                                                                                                         Test                 Test
                          RSS Section(s)                  Test Description                            Test Limit                                                           Reference
      Section(s)                                                                                                                     Condition             Result

  2.1049                  RSS-Gen [6.6]              Occupied Bandwidth                      N/A                                   CONDUCTED                 PASS           Section 7.2


  15.35(c)                N/A                        Duty Cycle Calculation                  N/A                                                              N/A           Section 7.3


                                                     Fundamental Field Strength
  15.249(a)(e)            RSS-210 [B.10]                                        < 50 mV/m                                                                    PASS           Section 7.4
                                                     Level


                                                     Harmonic Field Strength                                                         RADIATED
  15.249(a)(e)            RSS-210 [B.10]                                                     < 500 V/m                                                      PASS           Section 7.5
                                                     Level


                                                     General Field Strength                  < 15.209 limits or 50dB
  15.205, 15.209,                                    Limits (Restricted Bands                below the level of the                                                        Sections 7.5,
                  RSS-Gen [8.9]                                                                                                                              PASS
  15.249(d)(e)                                       and Radiated Emission                   fundamental (RSS-Gen                                                               7.6
                                                     Limits)                                 [8.9])


                                                     AC Conducted Emissions                  < FCC 15.207 limits                      LINE
  15.207                  RSS-Gen [8.8]                                                                                                                      PASS           Section 7.7
                                                     150kHz – 30MHz                          (RSS-Gen [8.8])                       CONDUCTED

                                                                Table 7-1. Summary of Test Results

 Notes:

 1) All modes of operation were investigated. The test results shown in the following sections represent the worst
    case emissions.
 2) For radiated band edge, automated test software was used to measure emissions and capture the
    corresponding plots necessary to show compliance. The measurement software utilized is PCTEST
    “Chamber Automation,” Version 0.2.16.
 3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the EUT
    connected to the spectrum analyzer through calibrated cables, attenuators, and couplers.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 10 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.2           Occupied Bandwidth Measurement
§2.1049; RSS-Gen (6.6)

The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper
frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by a
given emission shall be measured. The spectrum analyzers’ “occupied bandwidth” measurement function was
used to record the occupied bandwidth.

                                                                                                                     Measured
                                                     Frequency Channel                        Operating
                                                                                                                     Bandwidth
                                                       [MHz]     No.                           Mode
                                                                                                                       [kHz]
                                                                              ANT+
                                                          2441                  39      1001.1
                                                                            (non-hop)
                                                      Table 7-2. Occupied Bandwidth Measurement




                                                  Figure 7-1. Test Instrument & Measurement Setup




                                                 Plot 7-1. Occupied Bandwidth Plot (ANT+ – Ch. 39)




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 11 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.3           Duty Cycle Calculation
§15.35(c)

Per FCC Part 15.35(c), an average radiated field strength can be determined by applying a duty cycle correction
factor to a measured peak radiated field strength level. The duty cycle correction factor is determined based on
the worst case operation over a 100ms time period on any given channel. Two plots are included below to
determine the appropriate duty cycle correction factor.

In Plot 7-2 below, it is shown that the pulse width for one transmission burst of the ANT+ transmitter while
operating in non-hopping mode is 247.0s.




                                                               Plot 7-2. Pulse Width Measurement




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 12 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Duty Cycle Calculation
§15.35(c)

In Plot 7-3 below, a video trigger is used to determine the maximum number of times the transmitter operates at
maximum power over a 100ms period.




                                                            Plot 7-3. Worst Case 100ms Operation

Since it is determined that the transmitter burst appears a maximum of 21 times over a 100ms window with a
pulse width of 247.0s, then the appropriate duty cycle correction factor is determined from the following formula,
based on 15.35(c):

DCCF = 20log10 (number of hits x (worst case 100ms operation / 100ms))
     = 20log10 (21 x (0.2470ms/100ms)) = -25.70dB



                                                                        DCCF = -25.70dB




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 13 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.4           Fundamental Field Strength Level Measurement
§15.249(a)(e); RSS-210 (B.10)

Measurement is made while the EUT is operating in non-hopping transmission mode. The field strengths shown
below were measured using a spectrum analyzer. Peak field strength measurements are performed in the
analyzers’ swept spectrum mode using a peak detector with RBW = 3MHz and VBW ≥ RBW. Average field
strength data is determined by applying the duty cycle correction factor (DCCF) found in Section 7.3 to the
measured peak field strength values.

The maximum permissible average field strength level is 50mV/m (93.98dBV/m). The maximum
permissible peak field strength level is 500mV/m (113.98 dBV/m).



                                                                                                                                              Corrected
                                  Ant.      Antenna Turntable Analyzer                                       Field          Duty Cycle
 Frequency                                                                                  AFCL                                                Field            Limit           Margin
           Detector               Pol.       Height  Azimuth    Level                                      Strength         Correction
   [MHz]                                                                                   [dB/m]                                             Strength         [dBμV/m]           [dB]
                                 [H/V]        [cm]  [degree]   [dBm]                                      [dBμV/m]             [dB]
                                                                                                                                              [dBμV/m]

   2402.00           Peak           H           360              2           -17.11          6.79            97.07             -25.70            71.37            93.98           -22.61

   2402.00           Peak           H           360              2           -17.11          6.79            97.07               0.00            97.07            113.98          -16.91

   2441.00           Peak           H           269            283           -16.75          6.90            97.15             -25.70            71.45            93.98           -22.53

   2441.00           Peak           H           269            283           -16.75          6.90            97.15               0.00            97.15            113.98          -16.83

   2480.00           Peak           H           271            277           -19.01          6.93            96.17             -25.70            70.47            93.98           -23.51

   2480.00           Peak           H           271            277           -19.01          6.93            96.17               0.00            96.17            113.98          -17.81

                                                           Table 7-3. Field Strength Measurements

                                                                                                                                              Corrected
                                  Ant.      Antenna Turntable Analyzer                                       Field          Duty Cycle
 Frequency                                                                                  AFCL                                                Field            Limit           Margin
           Detector               Pol.       Height  Azimuth    Level                                      Strength         Correction
   [MHz]                                                                                   [dB/m]                                             Strength         [dBμV/m]           [dB]
                                 [H/V]        [cm]  [degree]   [dBm]                                      [dBμV/m]             [dB]
                                                                                                                                              [dBμV/m]

   2402.00           Peak           H           362            292           -21.54          6.79            92.25             -25.70             0.00            93.98           -93.98

   2402.00           Peak           H           362            292           -21.54          6.79            92.25               0.00             0.00            113.98         -113.98

   2441.00           Peak           H           260            277           -18.24          6.90            95.66             -25.70             0.00            93.98           -93.98

   2441.00           Peak           H           260            277           -18.24          6.90            95.66               0.00             0.00            113.98         -113.98

   2480.00           Peak           H           275            280           -22.66          6.93            91.27             -25.70             0.00            93.98           -93.98

   2480.00           Peak           H           275            280           -22.66          6.93            91.27               0.00             0.00            113.98         -113.98

                                                  Table 7-4. Field Strength Measurements with WCP




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                        Test Dates:                   EUT Type:
                                                                                                                                                                Page 14 of 24
1M1810250195-10.A3L                     10/23 - 12/19/2018            Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.5           Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e); RSS-210 (B.10), RSS-Gen (8.9)

                                                                                  Field Strength                           Measured Distance
                                       Frequency
                                                                                      [V/m]                                   [Meters]

                                     0.009 – 0.490 MHz                               2400/F (kHz)                                        300

                                     0.490 – 1.705 MHz                              24000/F (kHz)                                         30

                                     1.705 – 30.00 MHz                                       30                                           30

                                     30.00 – 88.00 MHz                                      100                                            3

                                     88.00 – 216.0 MHz                                      150                                            3

                                     216.0 – 960.0 MHz                                      200                                            3

                                      Above 960.0 MHz                                       500                                            3

                                                                       Table 7-5. Radiated Limits

Test Setup

The EUT and measurement equipment were set up as shown in the diagram below.




                                                                  Figure 7-2. Radiated Test Setup




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 15 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Sample Calculation

       o     Avg. Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m] + Duty Cycle Correction [dB]
       o     Pk. Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
       o     AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
       o     Margin [dB] = Field Strength Level [dBV/m] – Limit [dBV/m]

Test Notes

1. The spectrum is measured from 9kHz to the 10th harmonic and the worst-case emissions are reported. There
      were no non-harmonic emissions detected whose levels were within 20dB of the applicable limits so only
      harmonic emissions data is shown in this section.
2. All emissions lying in restricted bands specified in §15.205 and Section 8.10 of RSS-Gen are below the limit
      shown in Table 7-5. Per 15.249(d) and RSS-210 (B.10), the radiated emissions limits from 15.209 and RSS-
      Gen Section 8.10 were used since they were less than the limit of 50dB of attenuation from the measured
      fundamental field strength level.
3. Peak measurements > 1GHz using RBW = 1MHz and VBW = 3MHz.
4. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is
      manipulated through three orthogonal planes.
5. This unit was tested with its standard battery.
6. The "-" shown in the following RSE tables are used to denote a noise floor measurement.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 16 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e); RSS-210 (B.10), RSS-Gen (8.9)


           Worst Case Mode:                                     ANT+ (non-hopping)
           Measurement Distance:                                3 Meters
           Operating Frequency:                                 2402MHz
           Channel:                                             00

                                                                                                                                            Corrected
                                   Ant.      Antenna Turntable Analyzer                                       Field  Duty Cycle
Frequency                                                                                      AFCL                                           Field              Limit           Margin
          Detector                 Pol.       Height  Azimuth   Level                                       Strength Correction
  [MHz]                                                                                       [dB/m]                                        Strength           [dBμV/m]           [dB]
                                  [H/V]        [cm]   [degree]  [dBm]                                      [dBμV/m]     [dB]
                                                                                                                                            [dBμV/m]
   4804.00           Peak            H             -               -           -62.55          3.55           48.00           -25.70            22.30             53.98           -31.68

   4804.00           Peak            H             -               -           -62.55          3.55           48.00            0.00             48.00             73.98           -25.98

  12010.00           Peak            H             -               -           -62.73          16.45          60.72           -25.70            35.02             53.98           -18.96

  12010.00           Peak            H             -               -           -62.73          16.45          60.72            0.00             60.72             73.98           -13.26

                                                                Table 7-6. Radiated Measurements

           Worst Case Mode:                                     ANT+ (non-hopping)
           Measurement Distance:                                3 Meters
           Operating Frequency:                                 2441MHz
           Channel:                                             39

                                                                                                                                            Corrected
                                   Ant.      Antenna Turntable Analyzer                                       Field  Duty Cycle
Frequency                                                                                      AFCL                                           Field              Limit           Margin
          Detector                 Pol.       Height  Azimuth   Level                                       Strength Correction
  [MHz]                                                                                       [dB/m]                                        Strength           [dBμV/m]           [dB]
                                  [H/V]        [cm]   [degree]  [dBm]                                      [dBμV/m]     [dB]
                                                                                                                                            [dBμV/m]
   4882.00           Peak            H             -               -           -62.38          3.72           48.34           -25.70            22.64             53.98           -31.34

   4882.00           Peak            H             -               -           -62.38          3.72           48.34            0.00             48.34             73.98           -25.64

   7323.00           Peak            H             -               -           -62.95          8.99           53.04           -25.70            27.34             53.98           -26.64

   7323.00           Peak            H             -               -           -62.95          8.99           53.04            0.00             53.04             73.98           -20.94

  12205.00           Peak            H             -               -           -63.12          15.96          59.84           -25.70            34.14             53.98           -19.84

  12205.00           Peak            H             -               -           -63.12          15.96          59.84            0.00             59.84             73.98           -14.13

                                                                Table 7-7. Radiated Measurements




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                     EUT Type:
                                                                                                                                                                Page 17 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018              Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e); RSS-210 (B.10), RSS-Gen (8.9)

           Worst Case Mode:                                     ANT+ (non-hopping)
           Measurement Distance:                                3 Meters
           Operating Frequency:                                 2480MHz
           Channel:                                             78

                                                                                                                                            Corrected
                                   Ant.      Antenna Turntable Analyzer                                       Field  Duty Cycle
Frequency                                                                                      AFCL                                           Field              Limit           Margin
          Detector                 Pol.       Height  Azimuth   Level                                       Strength Correction
  [MHz]                                                                                       [dB/m]                                        Strength           [dBμV/m]           [dB]
                                  [H/V]        [cm]   [degree]  [dBm]                                      [dBμV/m]     [dB]
                                                                                                                                            [dBμV/m]
   4960.00           Peak            H             -               -           -62.29          4.04           48.75           -25.70            23.05             53.98           -30.93

   4960.00           Peak            H             -               -           -62.29          4.04           48.75            0.00             48.75             73.98           -25.23

   7440.00           Peak            H             -               -           -62.84          8.81           52.97           -25.70            27.27             53.98           -26.71

   7440.00           Peak            H             -               -           -62.84          8.81           52.97            0.00             52.97             73.98           -21.01

  12400.00           Peak            H             -               -           -62.22          15.40          60.18           -25.70            34.48             53.98           -19.50

  12400.00           Peak            H             -               -           -62.22          15.40          60.18            0.00             60.18             73.98           -13.80

                                                                Table 7-8. Radiated Measurements


           Worst Case Mode:                                     ANT+ (non-hopping)
           Measurement Distance:                                3 Meters
           Operating Frequency:                                 2402MHz
           Channel:                                             00

                                                                                                                                            Corrected
                                   Ant.      Antenna Turntable Analyzer                                       Field  Duty Cycle
Frequency                                                                                      AFCL                                           Field              Limit           Margin
          Detector                 Pol.       Height  Azimuth   Level                                       Strength Correction
  [MHz]                                                                                       [dB/m]                                        Strength           [dBμV/m]           [dB]
                                  [H/V]        [cm]   [degree]  [dBm]                                      [dBμV/m]     [dB]
                                                                                                                                            [dBμV/m]
   4804.00           Peak            V             -               -           -62.68          3.55           47.87           -25.70            22.17             53.98           -31.81

   4804.00           Peak            V             -               -           -62.68          3.55           47.87            0.00             47.87             73.98           -26.11

  12010.00           Peak            V             -               -           -62.81          16.45          60.64           -25.70            34.94             53.98           -19.04

  12010.00           Peak            V             -               -           -62.81          16.45          60.64            0.00             60.64             73.98           -13.34

                                                       Table 7-9. Radiated Measurements with WCP




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                     EUT Type:
                                                                                                                                                                Page 18 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018              Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.6           Radiated Restricted Band Edge Measurements
§15.205 §15.209 §15.249 (d); RSS-210 (B.10), RSS-Gen (8.9)

The radiated restricted band edge measurements are measured with an EMI test receiver connected to the
receive antenna while the EUT is transmitting. Two different amplitude offsets were used depending on whether
peak or average measurements were measured. The average measurements use a duty cycle correction factor
(DCCF).

The amplitude offset shown in the following plots for average measurements was calculated using the formula:

Offset (dB) = (Antenna Factor + Cable Loss) – Preamplifier Gain + DCCF

Worst Case Mode:                                 ANT+ (non-hopping)
Measurement Distance:                            3 Meters
Operating Frequency:                             2480MHz
Back Cover                                       Standard
Channel:                                         78




    Plot 7-4. Radiated Restricted Upper Band Edge                                                   Plot 7-5. Radiated Restricted Upper Band Edge
                Measurement (Average)                                                                             Measurement (Peak)




    Plot 7-6. Radiated Restricted Upper Band Edge                                                    Plot 7-7. Radiated Restricted Upper Band Edge
           Measurement with WCP (Average)                                                                     Measurement with WCP (Peak)




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 19 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


7.7           Line Conducted Measurement Data
§15.207; RSS-Gen (8.8)

Test Overview and Limit

All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while the
EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All data rates
and modes were investigated for conducted spurious emissions. Only the conducted emissions of the
configuration that produced the worst case emissions are reported in this section.

All conducted emissions must not exceed the limits shown in the table below, per §15.207 and RSS-Gen
(8.8).


                            Frequency of emission                                               Conducted Limit (dBV)
                                   (MHz)
                                                                                     Quasi-peak                                      Average
                                          0.15 – 0.5                                  66 to 56*                                      56 to 46*
                                           0.5 – 5                                       56                                             46
                                            5 – 30                                       60                                             50
                                                                    Table 7-10. Conducted Limits

*Decreases with the logarithm of the frequency.

Test Procedures Used

ANSI C63.10-2013, Section 6.2

Test Settings

             Quasi-Peak Field Strength Measurements

             1. Analyzer center frequency was set to the frequency of the spurious emission of interest
             2. RBW = 9kHz (for emissions from 150kHz – 30MHz)
             3. Detector = quasi-peak
             4. Sweep time = auto couple
             5. Trace mode = max hold
             6. Trace was allowed to stabilize
             Average Field Strength Measurements

             1. Analyzer center frequency was set to the frequency of the spurious emission of interest
             2. RBW = 9kHz (for emissions from 150kHz – 30MHz)
             3. Detector = RMS
             4. Sweep time = auto couple
             5. Trace mode = max hold
             6. Trace was allowed to stabilize



                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 20 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


Test Setup

The EUT and measurement equipment were set up as shown in the diagram below.




                                                  Figure 7-3. Test Instrument & Measurement Setup

Test Notes

1.        All modes of operation were investigated and the worst-case emissions are reported using mid channel.
          The emissions found were not affected by the choice of channel used during testing.
2.        The limit for an intentional radiator from 150kHz to 30MHz are specified in 15.207 and RSS-Gen (8.8).
3.        Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB)
4.        QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB)
5.        Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV)
6.        Traces shown in plot are made using a peak detector.
7.        Deviations to the Specifications: None.




                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 21 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


                                                            Plot 7-8. Line-Conducted Test Plot (L1)




                                                             Plot 7-9. Line-Conducted Test Plot (N)


                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 22 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


                                                  Plot 7-10. Line-Conducted Test Plot with WCP (L1)




                                                  Plot 7-11. Line-Conducted Test Plot with WCP (N)



                                                                                MEASUREMENT REPORT                                                              Approved by:
FCC ID: A3LSMG973U
                                                                                   (CERTIFICATION)                                                              Quality Manager
Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                Page 23 of 24
1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
© 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.


8.0           CONCLUSION


 The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
 FCC ID: A3LSMG973U is in compliance with Part 15 Subpart C (15.249) of the FCC Rules and RSS-210 of the
 Innovation, Science and Economic Development Canada Rules.




                                                                                 MEASUREMENT REPORT                                                              Approved by:
 FCC ID: A3LSMG973U
                                                                                    (CERTIFICATION)                                                              Quality Manager
 Test Report S/N:                       Test Dates:                    EUT Type:
                                                                                                                                                                 Page 24 of 24
 1M1810250195-10.A3L                    10/23 - 12/19/2018             Portable Handset
 © 2018 PCTEST Engineering Laboratory, Inc.                                                                                                                                    V 8.8 11/19/2018
 All rights reserved. Unless otherwise specified, no part of this report may be reproduced or utilized in any part, form or by any means, electronic or mechanical, including photocopying and
 microfilm, without permission in writing from PCTEST Engineering Laboratory, Inc. If you have any questions about this international copyright or have an enquiry about obtaining additional
 rights to this report or assembly of contents thereof, please contact INFO@PCTEST.COM.



Document Created: 2019-03-27 14:45:41
Document Modified: 2019-03-27 14:45:41
Download: SMG973U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMG973U Multi-band GSM/EDGE/CDMA/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report  Samsung Electronics Co Ltd
Document ID4148154
Application IDEmiaTXigvA44ena7Ktqnug==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize57.99kB (724858 bits)
Date Submitted2019-01-28 00:00:00
Date Available2019-02-01 00:00:00
Creation Date2018-12-21 21:15:02
Producing SoftwareAcrobat Distiller 15.0 (Windows)
Document Lastmod2019-01-28 10:12:28
Document TitleTest Report
Document CreatorPScript5.dll Version 5.2.2