SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

FCC ID Filing: A3LSMN935KOR
Purchase on Amazon: Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 2 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 3 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 4 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 5 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 6 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 7 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 8 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 9 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 10 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 11 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 12 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 13 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 14 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 15 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 16 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 17 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 18 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 19 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 20 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 21 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 22 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 23 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 24 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 25 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 26 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 27 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Page 28 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd

PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21046 USA
Tel. 410.290.6652 / Fax 410.290.6654
http://www.pctestlab.com
MEASUREMENT REPORT
FCC PART 15.249 ANT+
Applicant Name:
Samsung Electronics Co., Ltd.
129, Samsung-ro,
Yeongtong-gu, Suwon-si
Gyeonggi-do, 16677, Korea
Date of Testing:
6/1 - 6/29/2016
Test Site/Location:
PCTEST Lab. Columbia, MD, USA
Test Report Serial No.:
1M1703230122-09.A3L
FCC ID:
A3LSMN935KOR
APPLICANT:
Samsung Electronics Co., Ltd.
Application Type:
Certification
Model(s):
SM-N935S, SM-N935K, SM-N935L
EUT Type:
Portable Handset
Frequency Range:
2402 – 2480MHz
FCC Classification:
Low Power Communications Device Transmitter (DXX)
FCC Rule Part(s):
Part 15 Subpart C (15.249)
Test Procedure(s):
ANSI C63.10-2013, KDB 648474 D03 v01r04
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement
report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2013. Test results reported herein relate
only to the item(s) tested.
I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for
the qualifications of all persons taking them.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 1 of 28
V 6.3
03/24/2017
T A B L E
O F
C O N T E N T S
FCC PART 15.249 MEASUREMENT REPORT .................................................................................................. 3
1.0
2.0
3.0
INTRODUCTION......................................................................................................................................4
1.1
Scope ............................................................................................................................................................. 4
1.2
PCTEST Test Location ................................................................................................................................... 4
PRODUCT INFORMATION .....................................................................................................................5
2.1
Equipment Description ................................................................................................................................... 5
2.2
Device Capabilities ......................................................................................................................................... 5
2.3
Test Configuration .......................................................................................................................................... 5
2.4
EMI Suppression Device(s)/Modifications ...................................................................................................... 5
DESCRIPTION OF TESTS ......................................................................................................................6
3.1
Evaluation Procedure ..................................................................................................................................... 6
3.2
AC Line Conducted Emissions ....................................................................................................................... 6
3.3
Radiated Emissions ........................................................................................................................................ 7
3.4
Environmental Conditions .............................................................................................................................. 7
4.0
ANTENNA REQUIREMENTS ..................................................................................................................8
5.0
MEASUREMENT UNCERTAINTY ..........................................................................................................9
6.0
TEST EQUIPMENT CALIBRATION DATA ............................................................................................10
7.0
TEST RESULTS ....................................................................................................................................11
8.0
7.1
Summary ...................................................................................................................................................... 11
7.2
Occupied Bandwidth Measurement.............................................................................................................. 12
7.3
Duty Cycle Calculation ................................................................................................................................. 13
7.4
Fundamental Field Strength Level Measurement ......................................................................................... 15
7.5
Radiated Spurious Emission Measurements ................................................................................................ 16
7.6
Radiated Restricted Band Edge Measurements........................................................................................... 20
7.7
Line Conducted Measurement Data ............................................................................................................. 24
CONCLUSION .......................................................................................................................................28
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 2 of 28
V 6.3
03/24/2017
MEASUREMENT REPORT
FCC Part 15.249
§ 2.1033 General Information
APPLICANT:
Samsung Electronics Co., Ltd.
APPLICANT ADDRESS:
129, Samsung-ro,
Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea
TEST SITE:
PCTEST ENGINEERING LABORATORY, INC.
TEST SITE ADDRESS:
7185 Oakland Mills Road, Columbia, MD 21046 USA
FCC RULE PART(S):
Part 15 Subpart C (15.249)
MODEL:
SM-N935S
FCC ID:
A3LSMN935KOR
Test Device Serial No.:
066AA, 05A93, 0548E
FCC CLASSIFICATION:
Low Power Communications Device Transmitter (DXX)
DATE(S) OF TEST:
6/2 - 6/28/2016
TEST REPORT S/N:
1M1703230122-09.A3L
Production
Pre-Production
Engineering
Test Facility / Accreditations
Measurements were performed at PCTEST Engineering Lab located in Columbia, MD 21046, U.S.A.




PCTEST facility is an FCC registered (PCTEST Reg. No. 159966) test facility with the
site description report on file and has met all the requirements specified in Section 2.948
of the FCC Rules and Industry Canada (2451B-1).
PCTEST Lab is accredited to ISO 17025 by U.S. National Institute of Standards and
Technology (NIST) under the National Voluntary Laboratory Accreditation Program
(NVLAP Lab code: 100431-0) in EMC, FCC and Telecommunications.
PCTEST Lab is accredited to ISO 17025-2005 by the American Association for
Laboratory Accreditation (A2LA) in Specific Absorption Rate (SAR) testing, Hearing Aid
Compatibility (HAC) testing, CTIA Test Plans, and wireless testing for FCC and Industry
Canada Rules.
PCTEST Lab is a recognized U.S. Conformity Assessment Body (CAB) in EMC and
R&TTE (n.b. 0982) under the U.S.-EU Mutual Recognition Agreement (MRA).

PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC
Guide 65 by the American National Standards Institute (ANSI) in all scopes of FCC Rules
and Industry Canada Standards (RSS).

PCTEST facility is an IC registered (2451B-1) test laboratory with the site description on
file at Industry Canada.

PCTEST is a CTIA Authorized Test Laboratory (CATL) for AMPS, CDMA, and EvDO
wireless devices and for Over-the-Air (OTA) Antenna Performance testing for AMPS,
CDMA, GSM, GPRS, EGPRS, UMTS (W-CDMA), CDMA 1xEVDO, and CDMA 1xRTT.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 3 of 28
V 6.3
03/24/2017
1.0
1.1
INTRODUCTION
Scope
Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including
intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal
Communications Commission and the Industry Canada Certification and Engineering Bureau.
1.2
PCTEST Test Location
The map below shows the location of the PCTEST LABORATORY, its proximity to the FCC Laboratory, the
Columbia vicinity, the Baltimore-Washington Internt’l (BWI) airport, the city of Baltimore and the Washington,
DC area. (See Figure 1-1).
These measurement tests were conducted at the PCTEST Engineering Laboratory, Inc. facility located at
7185 Oakland Mills Road, Columbia, MD 21046. The site coordinates are 39o 10’23” N latitude and 76o 49’50”
W longitude. The facility is 0.4 miles North of the FCC laboratory, and the ambient signal and ambient signal
strength are approximately equal to those of the FCC laboratory. The detailed description of the measurement
facility was found to be in compliance with the requirements of § 2.948 according to ANSI C63.4-2014 on
January 22, 2015.
Figure 1-1. Map of the Greater Baltimore and Metropolitan Washington, D.C. area
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 4 of 28
V 6.3
03/24/2017
2.0
2.1
PRODUCT INFORMATION
Equipment Description
The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMN935KOR. The test
data contained in this report pertains only to the emissions due to the EUT’s ANT+ transmitter.
2.2
Device Capabilities
This device contains the following capabilities:
1900 GPRS/EDGE, 850/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, 802.11a/n/ac UNII,
Bluetooth (1x, EDR, LE), NFC, ANT+
Note: This device is capable of operating in hopping and non-hopping mode. The EUT can hop between 79
different channels in the 2400 – 2483.5MHz band.
2.3
Test Configuration
The Samsung Portable Handset FCC ID: A3LSMN935KOR was tested per the guidance of ANSI C63.102013. ANSI C63.10-2013 was used to reference the appropriate EUT setup for radiated spurious emissions
testing and AC line conducted testing. See Sections 3.2 for AC line conducted emissions test setups, 3.3 for
radiated emissions test setups, and 7.2 for antenna port conducted emissions test setups.
This device supports wireless charging capability and, thus, is subject to the test requirements of KDB 648474
D03 v01r04. Additional radiated spurious emission measurements were performed with the EUT lying flat on a
certified wireless charging pad (WCP) while operating under normal conditions in a simulated call or data
transmission configuration. The worst case radiated emissions data is shown in this report.
2.4
EMI Suppression Device(s)/Modifications
No EMI suppression device(s) were added and no modifications were made during testing.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 5 of 28
V 6.3
03/24/2017
3.0
3.1
DESCRIPTION OF TESTS
Evaluation Procedure
The measurement procedure described in the American National Standard of Procedures for Compliance
Testing of Unlicensed Wireless Devices (ANSI C63.10-2013) was used in the measurement of the Samsung
Portable Handset FCC ID: A3LSMN935KOR.
Deviation from measurement procedure…………………………………………….....................................None
3.2
AC Line Conducted Emissions
The line-conducted facility is located inside a 10'x16'x9' shielded enclosure. The shielded enclosure is
manufactured by ETS Lindgren RF Enclosures. The shielding effectiveness of the shielded room is in
accordance with MIL-Std-285 or NSA 65-5. A 1m x 1.5m wooden table 80cm high is placed 40cm away from
the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz-30MHz, 50/50H LineImpedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is
filtered by external high-current high-insertion loss power line filters. The external power line filter is an ETS
Lindgren Model LPRX-4X30 (100dB Attenuation, 14kHz-18GHz) and the two EMI/RFI filters are ETS Lindgren
Model LRW-2030-S1 (100dB Minimum Insertion Loss, 14kHz – 10GHz). These filters attenuate ambient signal
noise from entering the measurement lines. These filters are also bonded to the shielded enclosure.
The EUT is powered from one LISN and the support equipment is powered from the second LISN. If the EUT
is a DC-powered device, power will be derived from the source power supply it normally will be powered from
and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter
were shortened to a 1 meter length by non-inductive bundling (serpentine fashion) and draped over the back
edge of the test table. All cables were at least 40cm above the horizontal reference groundplane. Power
cables for support equipment were routed down to the second LISN while ensuring that that cables were not
draped over the second LISN.
Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up
to their normal operating condition. The RF output of the LISN was connected to the spectrum analyzer and
exploratory measurements were made to determine the frequencies producing the maximum emission from
the EUT. The spectrum was scanned from 150kHz to 30MHz with a spectrum analyzer. The detector function
was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 10kHz.
The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each
emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement
and mode of operation that produced these emissions is used for final measurements on the same test site.
The analyzer is set to CISPR quasi-peak and average detectors with a 9kHz resolution bandwidth for final
measurements.
Line conducted emissions test results are shown in Section 7.7. The EMI Receiver mode of the Agilent MXE
was used to perform AC line conducted emissions testing.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 6 of 28
V 6.3
03/24/2017
3.3
Radiated Emissions
The radiated test facilities consisted of an indoor 3 meter semi-anechoic chamber used for final measurements
and exploratory measurements, when necessary. The measurement area is contained within the semianechoic chamber which is shielded from any ambient interference. The test site inside the chamber is a 6m x
5.2m elliptical, obstruction-free area in accordance with Figure 5.7 of Clause 5 in ANSI C63.4-2014. A raised
turntable is used for radiated measurement. It is a continuously rotatable, remote-controlled, metallic turntable
and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to
maintain its function as a ground plane. Absorbers are arranged on the floor between the turn table and the
antenna mast in such a way so as to maximize the reduction of reflections for measurements above 1GHz. A
72.4cm high PVC support structure is placed on top of the turntable. A 3” (~7.6cm) sheet of high density
polystyrene is used as the table top and is placed on top of the PVC supports to bring the total height of the
table to 80cm. For measurements above 1GHz, a high density expanded polystyrene block is placed on top of
the test table to bring the total table height to 1.5m.
For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive
antenna height using a broadband antenna from 30MHz up to the upper frequency shown in 15.33(b)(1)
depending on the highest frequency generated or used in the device or on which the device operates or tunes.
For frequencies above 1GHz, linearly polarized double ridge horn antennas were used. For frequencies below
30MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were
performed at 1 meter test distance inside the semi-anechoic chamber using broadband antennas, broadband
amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum
emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them
to warm up to their normal operating condition. The test set-up was placed on top of the 1 x 1.5 meter table.
The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each
emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and
investigated. The system configuration, mode of operation, turntable azimuth, and receive antenna height was
noted for each frequency found.
Final measurements were made in the semi-anechoic chamber using calibrated, linearly polarized broadband
and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The
spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated
disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360
degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height
producing the maximum emission. Each emission was maximized by changing the orientation of the EUT
through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the
worst-case emissions.
3.4
Environmental Conditions
The temperature is controlled within range of 15oC to 35oC. The relative humidity is controlled within range of
10% to 75%. The atmospheric pressure is monitored within the range 86-106kPa (860-1060mbar).
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 7 of 28
V 6.3
03/24/2017
4.0
ANTENNA REQUIREMENTS
Excerpt from §15.203 of the FCC Rules/Regulations:
“An intentional radiator antenna shall be designed to ensure that no antenna other than that furnished by the
responsible party can be used with the device. The use of a permanently attached antenna or of an antenna
that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the
provisions of this section.”

The antennas of the Samsung Portable Handset are permanently attached.

There are no provisions for connection to an external antenna.
Conclusion:
The Samsung Portable Handset FCC ID: A3LSMN935KOR unit complies with the requirement of §15.203.
Ch.
Frequency (MHz)
00
2402
39
2441
78
2480
Table 4-1. Frequency/ Channel Operations
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 8 of 28
V 6.3
03/24/2017
5.0
MEASUREMENT UNCERTAINTY
The measurement uncertainties shown below were calculated in accordance with the requirements of
ANSI C63.4-2014. All measurement uncertainty values are shown with a coverage factor of k = 2 to indicate a
95% level of confidence. The measurement data shown herein meets or exceeds the UCISPR measurement
uncertainty values specified in CISPR 16-4-2 and, thus, can be compared directly to specified limits to
determine compliance.
Contribution
Expanded Uncertainty (±dB)
Conducted Bench Top
Measurements
1.13
Line Conducted Disturbance
3.09
Radiated Disturbance (<1GHz)
4.98
Radiated Disturbance (>1GHz)
5.07
Radiated Disturbance (>18GHz)
5.09
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 9 of 28
V 6.3
03/24/2017
6.0
TEST EQUIPMENT CALIBRATION DATA
Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
Manufacturer
Model
Description
‐
RE1
Radiated Emissions Cable Set (UHF/EHF)
‐
WL25‐1
Conducted Cable Set (25GHz)
Agilent
8447D
Broadband Amplifier
Agilent
N9020A
MXA Signal Analyzer
Agilent
N9038A
MXE EMI Receiver
Agilent
N9030A
PXA Signal Analyzer (44GHz)
Com‐Power
AL‐130
9kHz ‐ 30MHz Loop Antenna
Emco
3115
Horn Antenna (1‐18GHz)
Espec
ESX‐2CA
Environmental Chamber
ETS Lindgren
3117
1‐18 GHz DRG Horn (Medium)
ETS Lindgren
3160‐09
18‐26.5 GHz Standard Gain Horn
ETS‐Lindgren
3816/2NM
Line Impedance Stabilization Network
Huber+Suhner
Sucoflex 102A
40GHz Radiated Cable
K&L
11SH10‐3075/U18000
High Pass Filter
Pasternack
NMLC‐1
Line Conducted Emissions Cable (NM)
Rhode & Schwarz
TS‐PR18
Pre‐Amplifier
Rohde & Schwarz
TS‐PR18
1‐18 GHz Pre‐Amplifier
Rohde & Schwarz
TS‐PR26
18‐26.5 GHz Pre‐Amplifier
Rohde & Schwarz
ESU26
EMI Test Receiver (26.5GHz)
Rohde & Schwarz
TS‐PR40
26.5‐40 GHz Pre‐Amplifier
Rohde & Schwarz
ESU40
EMI Test Receiver (40GHz)
Rohde & Schwarz
FSW67
Signal / Spectrum Analyzer
Seekonk
NC‐100
Torque Wrench 5/16", 8" lbs
Sunol
JB5
Bi‐Log Antenna (30M ‐ 5GHz)
Cal Date
Cal Interval
4/28/2015
4/8/2015
6/12/2015
11/5/2015
4/21/2016
3/1/2016
7/30/2015
3/10/2016
3/4/2016
4/26/2016
6/17/2014
11/11/2014
4/20/2015
7/18/2015
4/28/2015
3/7/2016
3/7/2016
3/7/2016
3/12/2015
3/7/2016
7/17/2015
6/2/2015
3/2/2016
3/14/2016
Annual
Annual
Annual
Annual
Annual
Annual
Biennial
Biennial
Annual
Biennial
Biennial
Biennial
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Annual
Biennial
Biennial
Cal Due
Serial Number
7/28/2016
RE1
7/8/2016
WL25‐1
6/12/2016
1937A03348
11/5/2016
US46470561
4/21/2017
MY51210133
3/1/2017
MY52350166
7/30/2017
121034
3/10/2018
9704‐5182
3/4/2017
17620
4/26/2018
125518
6/17/2016
135427
11/11/2016
114451
7/20/2016
251425001
7/18/2016 11SH10‐3075/U18000‐2
7/28/2016
NMLC‐1
3/7/2017
101622
3/7/2017
100071
3/7/2017
100040
6/12/2016
100342
3/7/2017
100037
7/17/2016
100348
6/2/2016
103200
3/2/2018
N/A
A051107
3/14/2018
Table 6-1. Annual Test Equipment Calibration Schedule
Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date
range, care was taken to ensure that this equipment was used after the calibration date and before the
calibration due date.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 10 of 28
V 6.3
03/24/2017
7.0
TEST RESULTS
7.1
Summary
Company Name:
Samsung Electronics Co., Ltd.
FCC ID:
A3LSMN935KOR
Method/System:
Frequency Hopping Spread Spectrum (FHSS)
Number of Channels:
79
FCC Part
Section(s)
Test Description
Test Limit
Test
Condition
Test
Result
Reference
CONDUCTED
PASS
Section 7.2
N/A
Section 7.3
PASS
Section 7.4
TRANSMITTER MODE (Tx)
2.1049
Occupied Bandwidth
N/A
15.35(c)
Duty Cycle Calculation
N/A
15.249(a)(e)
Fundamental Field Strength
Level
< 50 mV/m
15.249(a)(e)
Harmonic Field Strength
Level
< 500 V/m
PASS
Section 7.5
15.205, 15.209,
15.249(d)(e)
General Field Strength Limits
(Restricted Bands and
Radiated Emission Limits)
< 15.209 limits or 50dB below
the level of the fundamental
PASS
Sections 7.5,
7.6
15.207
AC Conducted Emissions
150kHz – 30MHz
< FCC 15.207 limits
PASS
Section 7.7
RADIATED
LINE
CONDUCTED
Table 7-1. Summary of Test Results
Notes:
1) All modes of operation were investigated. The test results shown in the following sections represent the
worst case emissions.
2) For radiated band edge, automated test software was used to measure emissions and capture the
corresponding plots necessary to show compliance. The measurement software utilized is PCTEST
“Chamber Automation,” Version 1.1.5.
3) All antenna port conducted emissions testing was performed on a test bench with the antenna port of the
EUT connected to the spectrum analyzer through calibrated cables, attenuators, and couplers.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 11 of 28
V 6.3
03/24/2017
7.2
Occupied Bandwidth Measurement
§2.1049
The occupied bandwidth, that is the frequency bandwidth such that, below its lower and above its upper
frequency limits, the mean powers radiated are each equal to 0.5 percent of the total mean power radiated by
a given emission shall be measured. The spectrum analyzers’ “occupied bandwidth” measurement function
was used to record the occupied bandwidth.
Measured
Frequency Channel Operating
Bandwidth
[MHz]
No.
Mode
[MHz]
ANT+
1.0189
(non-hop)
Table 7-2. Occupied Bandwidth Measurement
2441
39
Figure 7-1. Test Instrument & Measurement Setup
Plot 7-1. Occupied Bandwidth Plot (ANT+ – Ch. 39)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 12 of 28
V 6.3
03/24/2017
7.3
Duty Cycle Calculation
§15.35(c)
Per FCC Part 15.35(c), an average radiated field strength can be determined by applying a duty cycle
correction factor to a measured peak radiated field strength level. The duty cycle correction factor is
determined based on the worst case operation over a 100ms time period on any given channel. Two plots are
included below to determine the appropriate duty cycle correction factor.
In Plot 7-2 below, it is shown that the pulse width for one transmission burst of the ANT+ transmitter while
operating in non-hopping mode is N/As.
Plot 7-2. Pulse Width Measurement
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 13 of 28
V 6.3
03/24/2017
Duty Cycle Calculation
§15.35(c)
In Plot 7-3 below, a video trigger is used to determine the maximum number of times the transmitter operates
at maximum power over a 100ms period.
Plot 7-3. Worst Case 100ms Operation
Since it is determined that the transmitter burst appears a maximum of 2 times over a 100ms window with a
pulse width of N/As, then the appropriate duty cycle correction factor is determined from the following
formula, based on 15.35(c):
DCCF = 20log10 (number of hits x (worst case 100ms operation / 100ms))
= 20log10 (2 x (0.2760ms/100ms)) = -45.16dB
DCCF = -45.16dB
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 14 of 28
V 6.3
03/24/2017
7.4
Fundamental Field Strength Level Measurement
§15.249(a)(e)
Measurement is made while the EUT is operating in non-hopping transmission mode. The field strengths
shown below were measured using a spectrum analyzer. Peak field strength measurements are performed in
the analyzers’ swept spectrum mode using a peak detector with RBW = 3MHz and VBW ≥ RBW. Average field
strength data is determined by applying the duty cycle correction factor (DCCF) found in Section 7.3 to the
measured peak field strength values.
The maximum permissible average field strength level is 50mV/m (93.98dBV/m). The maximum
permissible peak field strength level is 500mV/m (113.98 dBV/m).
Ant. Antenna Turntable Analyzer
Frequency
Level
Azimuth
Detector Pol. Height
[MHz]
[dBm]
[degree]
[cm]
[H/V]
AFCL
[dB/m]
Duty Cycle
Field
Strength Correction
[dB]
[dBμV/m]
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
2402.00
Peak
210
54
-73.84
31.74
64.90
-45.16
19.74
93.98
-74.24
2402.00
Peak
210
54
-73.84
31.74
64.90
0.00
64.90
113.98
-49.08
2441.00
Peak
214
12
-73.50
31.74
65.25
-45.16
20.09
93.98
-73.89
2441.00
Peak
214
12
-73.50
31.74
65.25
0.00
65.25
113.98
-48.73
2480.00
Peak
205
16
-73.44
31.75
65.31
-45.16
20.15
93.98
-73.83
2480.00
Peak
205
16
-73.44
31.75
65.31
0.00
65.31
113.98
-48.67
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
Table 7-3. Field Strength Measurements
Ant. Antenna Turntable Analyzer
Frequency
Azimuth
Detector Pol. Height
Level
[MHz]
[cm]
[degree]
[H/V]
[dBm]
AFCL
[dB/m]
Field
Duty Cycle
Strength Correction
[dBμV/m]
[dB]
2402.00
Peak
216
54
-74.97
31.74
63.77
-45.16
18.61
93.98
-75.37
2402.00
Peak
216
54
-74.97
31.74
63.77
0.00
63.77
113.98
-50.21
2441.00
Peak
156
24
-74.45
31.74
64.29
-45.16
19.13
93.98
-74.85
2441.00
Peak
156
24
-74.45
31.74
64.29
0.00
64.29
113.98
-49.69
2480.00
Peak
142
278
-73.93
31.75
64.82
-45.16
19.66
93.98
-74.32
2480.00
Peak
142
278
-73.93
31.75
64.82
0.00
64.82
113.98
-49.16
Table 7-4. Field Strength Measurements with WCP
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 15 of 28
V 6.3
03/24/2017
7.5
Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e)
Field Strength
[V/m]
Measured Distance
[Meters]
0.009 – 0.490 MHz
2400/F (kHz)
300
0.490 – 1.705 MHz
24000/F (kHz)
30
1.705 – 30.00 MHz
30
30
30.00 – 88.00 MHz
100
88.00 – 216.0 MHz
150
216.0 – 960.0 MHz
200
Above 960.0 MHz
500
Frequency
Table 7-5. Radiated Limits
Test Setup
The EUT and measurement equipment were set up as shown in the diagram below.
Figure 7-2. Radiated Test Setup
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 16 of 28
V 6.3
03/24/2017
Sample Calculation
Avg. Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m] + Duty Cycle Correction [dB]
Pk. Field Strength Level [dBV/m] = Analyzer Level [dBm] + 107 + AFCL [dB/m]
AFCL [dB/m] = Antenna Factor [dB/m] + Cable Loss [dB]
Margin [dB] = Field Strength Level [dBV/m] – Limit [dBV/m]
Test Notes
1. The spectrum is measured from 9kHz to the 10th harmonic and the worst-case emissions are reported.
There were no non-harmonic emissions detected whose levels were within 20dB of the applicable limits so
only harmonic emissions data is shown in this section.
2. All emissions lying in restricted bands specified in §15.205 are below the limit shown in Table 7-5. Per
15.249(d), the radiated emissions limits from 15.209 were used since they were less than the limit of 50dB
of attenuation from the measured fundamental field strength level.
3. Peak measurements > 1GHz using RBW = 1MHz and VBW = 3MHz.
4. The antenna is manipulated through typical positions, polarity and length during the tests. The EUT is
manipulated through three orthogonal planes.
5. This unit was tested with its standard battery.
6. The "-" shown in the following RSE tables are used to denote a noise floor measurement.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 17 of 28
V 6.3
03/24/2017
Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e)
Worst Case Mode:
Measurement Distance:
Operating Frequency:
Channel:
ANT+ (non-hopping)
3 Meters
2402MHz
00
Ant. Antenna Turntable Analyzer
Frequency
Detector Pol. Height
Azimuth
Level
[MHz]
[H/V]
[cm]
[degree]
[dBm]
AFCL
[dB/m]
Field
Duty Cycle
Strength Correction
[dBμV/m]
[dB]
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
4804.00
Peak
-98.65
40.43
48.78
-45.16
3.62
53.98
-50.36
4804.00
Peak
-98.65
40.43
48.78
0.00
48.78
73.98
-25.20
12010.00
Peak
-97.56
51.20
60.63
-45.16
15.47
53.98
-38.50
12010.00
Peak
-97.56
51.20
60.63
0.00
60.63
73.98
-13.34
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
Table 7-6. Radiated Measurements
Worst Case Mode:
Measurement Distance:
Operating Frequency:
Channel:
ANT+ (non-hopping)
3 Meters
2441MHz
39
Ant. Antenna Turntable Analyzer
Frequency
Detector Pol. Height
Level
Azimuth
[MHz]
[H/V]
[dBm]
[cm]
[degree]
AFCL
[dB/m]
Field
Duty Cycle
Strength Correction
[dBμV/m]
[dB]
4882.00
Peak
-97.62
39.94
49.32
-45.16
4.16
53.98
-49.82
4882.00
Peak
-97.62
39.94
49.32
0.00
49.32
73.98
-24.66
7323.00
Peak
-98.36
43.81
52.44
-45.16
7.28
53.98
-46.70
7323.00
Peak
-98.36
43.81
52.44
0.00
52.44
73.98
-21.54
12205.00
Peak
-96.40
51.21
61.81
-45.16
16.65
53.98
-37.33
12205.00
Peak
-96.40
51.21
61.81
0.00
61.81
73.98
-12.16
Table 7-7. Radiated Measurements
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 18 of 28
V 6.3
03/24/2017
Radiated Spurious Emission Measurements
§15.205 §15.209 §15.249 (d)(e)
Worst Case Mode:
Measurement Distance:
Operating Frequency:
Channel:
ANT+ (non-hopping)
3 Meters
2480MHz
78
Ant. Antenna Turntable Analyzer
Frequency
Detector Pol. Height
Level
Azimuth
[MHz]
[H/V]
[dBm]
[cm]
[degree]
AFCL
[dB/m]
Field
Duty Cycle
Strength Correction
[dBμV/m]
[dB]
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
4960.00
Peak
-97.75
40.02
49.27
-45.16
4.11
53.98
-49.87
4960.00
Peak
-97.75
40.02
49.27
0.00
49.27
73.98
-24.71
7440.00
Peak
-98.27
44.42
53.14
-45.16
7.98
53.98
-45.99
7440.00
Peak
-98.27
44.42
53.14
0.00
53.14
73.98
-20.83
12400.00
Peak
-96.32
51.65
62.33
-45.16
17.17
53.98
-36.81
12400.00
Peak
-96.32
51.65
62.33
0.00
62.33
73.98
-11.65
Corrected
Field
Strength
[dBμV/m]
Limit
[dBμV/m]
Margin
[dB]
Table 7-8. Radiated Measurements
Worst Case Mode:
Measurement Distance:
Operating Frequency:
Channel:
ANT+ (non-hopping)
3 Meters
2480MHz
78
Ant. Antenna Turntable Analyzer
Frequency
Azimuth
Detector Pol. Height
Level
[MHz]
[H/V]
[cm]
[degree]
[dBm]
AFCL
[dB/m]
Duty Cycle
Field
Strength Correction
[dB]
[dBμV/m]
4960.00
Peak
-98.16
40.02
48.86
-45.16
3.70
53.98
-50.28
4960.00
Peak
-98.16
40.02
48.86
0.00
48.86
73.98
-25.12
7440.00
Peak
-99.45
44.42
51.96
-45.16
6.80
53.98
-47.17
7440.00
Peak
-99.45
44.42
51.96
0.00
51.96
73.98
-22.01
12400.00
Peak
-96.90
51.65
61.75
-45.16
16.59
53.98
-37.39
12400.00
Peak
-96.90
51.65
61.75
0.00
61.75
73.98
-12.23
Table 7-9. Radiated Measurements with WCP
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 19 of 28
V 6.3
03/24/2017
7.6
Radiated Restricted Band Edge Measurements
§15.205 §15.209 §15.249 (d)
The radiated restricted band edge measurements are measured with an EMI test receiver connected to the
receive antenna while the EUT is transmitting. Two different amplitude offsets were used depending on
whether peak or average measurements were measured. The average measurements use a duty cycle
correction factor (DCCF).
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss) – Preamplifier Gain + DCCF
Worst Case Mode:
ANT+ (non-hopping)
Measurement Distance:
3 Meters
Operating Frequency:
2480MHz
Back Cover
Standard
Channel:
78
* RBW 1 MHz
* VBW 10 kHz
Ref
* Att
75.5 dBµV
Offset
0 dB
SWT 2.5 ms
Marker 1 [T1 ]
5.25 dBµV
2.483500000 GHz
-31.5 dB
LIMIT CHECK
70
PASS
SGL
1 PK
MAXH
60
FCC15CAV
LVL
50
40
PS
30
20
SWP
100 of
100
3DB
AC
10
-10
-20
Center
2.4835 GHz
Date: 29.JUN.2016
1 MHz/
Span
10 MHz
16:00:51
Plot 7-4. Radiated Restricted Upper Band Edge Measurement (Average)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 20 of 28
V 6.3
03/24/2017
Radiated Restricted Band Edge Measurements
§15.205 §15.209 §15.249 (d)
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss) – Preamplifier Gain
* RBW 1 MHz
* VBW 3 MHz
Ref
120.5 dBµV
120 Offset
* Att
0 dB
SWT 2.5 ms
Marker 2 [T2 ]
56.48 dBµV
2.483580128 GHz
13.5 dB
LIMIT CHECK
PASS
110
100
2 PK
MAXH
LVL
90
PS
80
FCC15CPK
70
60
3DB
AC
50
40
30
Center
2.4835 GHz
Date: 29.JUN.2016
1 MHz/
Span
10 MHz
16:01:25
Plot 7-5. Radiated Restricted Upper Band Edge Measurement (Peak)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 21 of 28
V 6.3
03/24/2017
Radiated Restricted Band Edge Measurements
§15.205 §15.209 §15.249 (d)
The amplitude offset shown in the following plots for average measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss) – Preamplifier Gain + DCCF
Worst Case Mode:
ANT+ (non-hopping)
Measurement Distance:
3 Meters
Operating Frequency:
2480MHz
Back Cover
Standard
Channel:
78
* RBW 1 MHz
* VBW 10 kHz
Ref
* Att
75.5 dBµV
Offset
0 dB
SWT 2.5 ms
Marker 1 [T1 ]
5.10 dBµV
2.483500000 GHz
-31.5 dB
LIMIT CHECK
70
PASS
SGL
1 PK
MAXH
60
FCC15CAV
LVL
50
40
PS
30
20
SWP
100 of
100
3DB
AC
10
-10
-20
Center
2.4835 GHz
Date: 29.JUN.2016
1 MHz/
Span
10 MHz
16:10:25
Plot 7-6. Radiated Restricted Upper Band Edge Measurement with WCP (Average)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 22 of 28
V 6.3
03/24/2017
Radiated Restricted Band Edge Measurements
§15.205 §15.209 §15.249 (d)
The amplitude offset shown in the following plots for peak measurements was calculated using the formula:
Offset (dB) = (Antenna Factor + Cable Loss) – Preamplifier Gain
* RBW 1 MHz
* VBW 3 MHz
Ref
120.5 dBµV
120 Offset
* Att
0 dB
SWT 2.5 ms
Marker 2 [T2 ]
55.27 dBµV
2.483564103 GHz
13.5 dB
LIMIT CHECK
PASS
110
100
2 PK
MAXH
LVL
90
PS
80
FCC15CPK
70
3DB
AC
60
50
40
30
Center
2.4835 GHz
Date: 29.JUN.2016
1 MHz/
Span
10 MHz
16:12:48
Plot 7-7. Radiated Restricted Upper Band Edge Measurement with WCP (Peak)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 23 of 28
V 6.3
03/24/2017
7.7
Line Conducted Measurement Data
§15.207
Test Overview and Limit
All AC line conducted spurious emissions are measured with a receiver connected to a grounded LISN while
the EUT is operating at its maximum duty cycle, at maximum power, and at the appropriate frequencies. All
data rates and modes were investigated for conducted spurious emissions. Only the conducted emissions of
the configuration that produced the worst case emissions are reported in this section.
All conducted emissions must not exceed the limits shown in the table below, per §15.207.
Frequency of emission
(MHz)
Conducted Limit (dBV)
Quasi-peak
66 to 56*
56
60
0.15 – 0.5
0.5 – 5
5 – 30
Average
56 to 46*
46
50
Table 7-10. Conducted Limits
*Decreases with the logarithm of the frequency.
Test Procedures Used
ANSI C63.10-2013, Section 6.2
Test Settings
Quasi-Peak Field Strength Measurements
1. Analyzer center frequency was set to the frequency of the spurious emission of interest
2. RBW = 9kHz (for emissions from 150kHz – 30MHz)
3. Detector = quasi-peak
4. Sweep time = auto couple
5. Trace mode = max hold
6. Trace was allowed to stabilize
Average Field Strength Measurements
1. Analyzer center frequency was set to the frequency of the spurious emission of interest
2. RBW = 9kHz (for emissions from 150kHz – 30MHz)
3. Detector = RMS
4. Sweep time = auto couple
5. Trace mode = max hold
6. Trace was allowed to stabilize
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 24 of 28
V 6.3
03/24/2017
Test Setup
The EUT and measurement equipment were set up as shown in the diagram below.
Figure 7-3. Test Instrument & Measurement Setup
Test Notes
1.
All modes of operation were investigated and the worst-case emissions are reported using mid channel.
The emissions found were not affected by the choice of channel used during testing.
2.
The limit for an intentional radiator from 150kHz to 30MHz are specified in 15.207.
3.
Corr. (dB) = Cable loss (dB) + LISN insertion factor (dB)
4.
QP/AV Level (dBV) = QP/AV Analyzer/Receiver Level (dBV) + Corr. (dB)
5.
Margin (dB) = QP/AV Limit (dBV) - QP/AV Level (dBV)
6.
Traces shown in plot are made using a peak detector.
7.
Deviations to the Specifications: None.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 25 of 28
V 6.3
03/24/2017
Line Conducted Measurement Data
§15.207
Plot 7-8. Line-Conducted Test Plot (L1)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 26 of 28
V 6.3
03/24/2017
Line Conducted Measurement Data
§15.207
Plot 7-9. Line-Conducted Test Plot (N)
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 27 of 28
V 6.3
03/24/2017
8.0
CONCLUSION
The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
FCC ID: A3LSMN935KOR is in compliance with Part 15 Subpart C (15.249) of the FCC Rules.
FCC ID:
A3LSMN935KOR
FCC Pt. 15.249 ANT+ TEST REPORT
(CERTIFICATION)
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-09.A3L
6/1 - 6/29/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 28 of 28
V 6.3
03/24/2017
Download: SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report ANT+ Samsung Electronics Co Ltd
Document ID3370914
Application IDm9wFPb1/4Fgz3blYtJe5SA==
Document DescriptionANT+ Test Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize82.65kB (1033134 bits)
Date Submitted2017-04-25 00:00:00
Date Available2017-05-04 00:00:00
Creation Date2017-04-20 18:23:59
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2017-04-25 16:44:02
Document TitleANT+ Test Report
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2017:04:20 18:23:59-04:00
Modify Date                     : 2017:04:25 16:44:02-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:04:25 16:44:02-04:00
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:d044f960-d062-41ec-bdb2-005ab6f4192e
Instance ID                     : uuid:e682fb51-0ee7-40aa-a554-0c6c71d181af
Page Count                      : 28

Facebook Twitter Google+ RSS © FCCID.io 2017