SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd

Samsung Electronics Co Ltd Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

FCC ID Filing: A3LSMN935KOR
Purchase on Amazon: Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 2 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 3 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 4 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 5 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 6 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 7 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 8 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 9 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 10 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 11 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 12 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 13 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 14 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 15 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 16 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Page 17 of SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd

PCTEST ENGINEERING LABORATORY, INC.
7185 Oakland Mills Road, Columbia, MD 21045 USA
Tel. 410.290.6652 / Fax 410.290.6654
http://www.pctestlab.com
MEASUREMENT REPORT
FCC PART 15.407 DFS
Company Name:
Samsung Electronics Co., Ltd.
129, Samsung-ro,
Yeongtong-gu, Suwon-si
Gyeonggi-do, 16677, Korea
Date of Testing:
6/22/2016
Test Site/Location:
PCTEST Lab. Columbia, MD, USA
Test Report Serial No.:
1M1703230122-06.A3L
FCC ID:
A3LSMN935KOR
COMPANY:
Samsung Electronics Co., Ltd.
Model(s):
SM-N935S, SM-N935K, SM-N935L
EUT Type:
Portable Handset
Type of Device:
Client Only Device, No Radar Detection Capability
Frequency Range:
5260 – 5320 MHz (UNII-2A Band)
5500 – 5720 MHz (UNII-2C Band)
55.976 mW (17.48 dBm) Conducted (802.11n UNII Band 2A)
Output Power:
53.827 mW (17.31 dBm) Conducted (802.11n UNII Band 2C)
FCC Classification:
Unlicensed National Information Infrastructure (UNII)
FCC Rule Part(s):
Part 15.407(UNII)
Test Procedure(s):
KDB 905462 D02 v02
This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement
report and was tested in accordance with the measurement procedures specified in KDB 905462 D02 v02 Compliance Measurement
Procedures for Unlicensed-National Information Infrastructure Devices Operating in the 5.25 – 5.35 GHz and 5.47 – 5.725 GHz Bands
Incorporating Dynamic Frequency Selection. Test results reported herein relate only to the item(s) tested.
I attest to the accuracy of data. All measurements reported herein were performed by me or were made under my supervision and are
correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for
the qualifications of all persons taking them.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 1 of 17
V 6.3
03/24/2017
T A B L E
O F
C O N T E N T S
FCC PART 15.407 MEASUREMENT REPORT .................................................................................................. 3
1.0
2.0
3.0
4.0
INTRODUCTION......................................................................................................................................4
1.1
Scope ............................................................................................................................................................. 4
1.2
Evaluation Procedure ..................................................................................................................................... 4
1.3
Summary of Test Results ............................................................................................................................... 4
PRODUCT INFORMATION .....................................................................................................................5
2.1
Equipment Description ................................................................................................................................... 5
2.2
EUT Capabilities............................................................................................................................................. 5
2.3
Modifications .................................................................................................................................................. 5
DESCRIPTION OF DYNAMIC FREQUENCY SELECTION TEST .........................................................6
3.1
Applicability .................................................................................................................................................... 6
3.2
Requirements ................................................................................................................................................. 6
3.3
DFS Detection Threshold Values ................................................................................................................... 8
3.4
Parameters of DFS Test Signals .................................................................................................................... 8
3.5
Procedure ....................................................................................................................................................... 9
TEST EQUIPMENT................................................................................................................................10
4.1
Additional Equipment ................................................................................................................................... 10
5.0
TEST RESULTS ....................................................................................................................................11
6.0
CONCLUSION .......................................................................................................................................17
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 2 of 17
V 6.3
03/24/2017
DFS MEASUREMENT REPORT
FCC Part 15.407
§ 2.1033 General Information
APPLICANT:
Samsung Electronics Co., Ltd.
APPLICANT ADDRESS:
129, Samsung-ro,
Yeongtong-gu, Suwon-si, Gyeonggi-do, 16677, Korea
TEST SITE:
PCTEST ENGINEERING LABORATORY, INC.
TEST SITE ADDRESS:
7185 Oakland Mills Road, Columbia, MD 21046 USA
FCC RULE PART(S):
Part 15.407(h)
BASE MODEL:
SM-N935S
FCC ID:
A3LSMN935KOR
Test Device Serial No.:
066AA
DEVICE CLASSIFICATION:
Client Only, No Radar Detection
DATE(S) OF TEST:
6/2 - 6/28/2016
TEST REPORT S/N:
1M1703230122-06.A3L
Production
Pre-Production
Engineering
Test Facility / Accreditations
Measurements were performed at PCTEST Engineering Lab located in Columbia, MD 21045, U.S.A.




PCTEST facility is an FCC registered (PCTEST Reg. No. 159966) test facility with the
site description report on file and has met all the requirements specified in Section 2.948
of the FCC Rules and Industry Canada (2451B-1).
PCTEST Lab is accredited to ISO 17025 by U.S. National Institute of Standards and
Technology (NIST) under the National Voluntary Laboratory Accreditation Program
(NVLAP Lab code: 100431-0) in EMC, FCC and Telecommunications.
PCTEST Lab is accredited to ISO 17025-2005 by the American Association for
Laboratory Accreditation (A2LA) in Specific Absorption Rate (SAR) testing, Hearing Aid
Compatibility (HAC) testing, CTIA Test Plans, and wireless testing for FCC and Industry
Canada Rules.
PCTEST Lab is a recognized U.S. Conformity Assessment Body (CAB) in EMC and
R&TTE (n.b. 0982) under the U.S.-EU Mutual Recognition Agreement (MRA).

PCTEST TCB is a Telecommunication Certification Body (TCB) accredited to ISO/IEC
Guide 65 by the American National Standards Institute (ANSI) in all scopes of FCC Rules
and Industry Canada Standards (RSS).

PCTEST facility is an IC registered (2451B-1) test laboratory with the site description on
file at Industry Canada.

PCTEST is a CTIA Authorized Test Laboratory (CATL) for AMPS, CDMA, and EvDO
wireless devices and for Over-the-Air (OTA) Antenna Performance testing for AMPS,
CDMA, GSM, GPRS, EGPRS, UMTS (W-CDMA), CDMA 1xEVDO, and CDMA 1xRTT.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 3 of 17
V 6.3
03/24/2017
1.0 I N T R O D U C T I O N
1.1 Scope
This report has been prepared to demonstrate compliance with the requirements for Dynamic Frequency
Selection (DFS) as stated in KDB 905462 D02 v02. Testing was performed on the Samsung Portable
Handset FCC ID: A3LSMN935KOR. As of July 20, 2007 all devices operating in the 5250 – 5350 MHz
and/or the 5470 – 5725 MHz bands must comply with the DFS requirements. As the EUT does not have radar
detection capability it was evaluated as a Client Only Device. All test results reported herein are applicable to
the sample selected for testing. The unit used for testing was supplied by Samsung Electronics Co., Ltd..
1.2 Evaluation Procedure
Conducted test methodology was used for the DFS evaluation procedure of the Samsung Portable Handset
FCC ID: A3LSMN935KOR. No deviations to the test procedure and test methods occurred during the
evaluation of the EUT.
1.3 Summary of Test Results
The Samsung Portable Handset FCC ID: A3LSMN935KOR was found to be compliant with the
requirements for DFS as required for a Client Device per Part 15.407(h) and KDB 905462 D02 v02. The
following table lists the measured parameters. The actual data and plots can be found in Section 5 and 6 of
this report.
Limit
Result
5260 – 5320 MHz
UNII – 2A Band
Measured
Channel Move Time
9.18 s
10 seconds
Pass
Channel Closing Transmission Time
< 200ms
+ 11.78 ms
(aggregate)
200ms + aggregate of
60ms over remaining
10 second period
Pass
Client beacon test
Monitored for 10
minutes with no client
transmission
No client transmission
occurred
Pass
5470 – 5725
MHz
UNII – 2C Band
Parameter
Channel Move Time
7.27 s
10 seconds
Pass
200ms + aggregate of
< 200ms
+ 17.55 ms
60ms over remaining
(aggregate)
10 second period
Monitored for 10
No client transmission
minutes with no client
occurred
transmission
Table 1-1. DFS Test Results Summary
Channel Closing Transmission Time
Pass
Client beacon test
Pass
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 4 of 17
V 6.3
03/24/2017
2.0 P R O D U C T I N F O R M A T I O N
2.1 Equipment Description
The Equipment Under Test (EUT) is the Samsung Portable Handset FCC ID: A3LSMN935KOR.
Mode of Operation:
Master Device
Client Device (No radar detection)
Client Device with Radar Detection
Parameters of EUT:
5260 – 5320 MHz
5500 – 5720 MHz
Frequency
55.976 mW (17.48 dBm) Conducted (802.11n UNII Band 2A)
Output Power:
53.827 mW (17.31 dBm) Conducted (802.11n UNII Band 2C)
Modulation:
OFDM
Channel Bandwidth:
20, 40, 80 MHz
2.2 EUT Capabilities
This device contains the following capabilities:
1900 GPRS/EDGE, 850/1900 WCDMA/HSPA, Multi-band LTE, 802.11b/g/n WLAN, 802.11a/n/ac UNII,
Bluetooth (1x, EDR, LE), NFC, ANT+
2.3 Modifications
No modifications to the EUT were required in order to comply with the DFS specifications.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 5 of 17
V 6.3
03/24/2017
3.0 D E S C R I P T I O N O F D Y N A M I C F R E Q U E N C Y S E L E C T I O N T E S T
3.1 Applicability
The following table from KDB 905462 D02 v02 lists the applicable requirements for the DFS testing. The
device evaluated in this report is considered a client device without radar detection capability.
Requirement
Operational Mode
Master
Client Without
Radar Detection
Client With Radar
Detection
Non-Occupancy Period
Yes
Not required
Yes
DFS Detection Threshold
Yes
Not required
Yes
Channel Availability Check Time
Yes
Not required
Not required
Uniform Spreading
Yes
Not required
Not required
U-NII Detection Bandwidth
Yes
Not required
Yes
Table 3-1. DFS Applicability
Requirement
Operational Mode
Master
Client
Without Radar
Detection
Client
With Radar
Detection
DFS Detection Threshold
Yes
Not required
Yes
Channel Closing Transmission Time
Yes
Yes
Yes
Channel Move Time
Yes
Yes
Yes
U-NII Detection Bandwidth
Yes
Not required
Yes
Client Beacon Test
N/A
Yes
Yes
Table 3-2. DFS Applicability During Normal Operation
3.2 Requirements
Per KDB 905462 D02 v02 the following are the requirements for Client Devices:
a) A Client Device will not transmit before having received appropriate control signals from a Master Device.
b) A Client Device will stop all its transmissions whenever instructed by a Master Device to which it is
associated and will meet the Channel Move Time and Channel Closing Transmission Time requirements.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 6 of 17
V 6.3
03/24/2017
The Client Device will not resume any transmissions until it has again received control signals from a
Master Device.
c) If a Client Device is performing In-Service Monitoring and detects a Radar Waveform above the DFS
Detection Threshold, it will inform the Master Device. This is equivalent to the Master Device detecting the
Radar Waveform and d) through f) of section 5.1.1 apply.
d) Irrespective of Client Device or Master Device detection the Channel Move Time and Channel Closing
Transmission Time requirements remain the same.
Channel Move Time and Channel Closing Transmission Time requirements are listed in the following table.
Parameter
Value
Non-occupancy period
Minimum 30 minutes
Channel Availability Check Time
60 seconds
10 seconds
Channel Move Time
See Note 1.
200 milliseconds + an
Channel Closing Transmission Time
aggregate of 60 milliseconds over
remaining 10 second period. See Notes
1 and 2.
Minimum 80% of the UNII 99% transmission
power bandwidth. See Note 3.
U-NII Detection Bandwidth
Note 1: The instant that the Channel Move Time and the Channel Closing Transmission Time begins is
as follows:
• For the Short Pulse Radar Test Signals this instant is the end of the Burst.
• For the Frequency Hopping radar Test Signal, this instant is the end of the last radar
Burst generated.
• For the Long Pulse Radar Test Signal this instant is the end of the 12 second period
defining the Radar Waveform.
Note 2: The Channel Closing Transmission Time is comprised of 200 milliseconds starting at
the beginning of the Channel Move Time plus any additional intermittent control signals required
to facilitate a Channel move (an aggregate of 60 milliseconds) during the remainder of the 10
second period. The aggregate duration of control signals will not count quiet periods in between
transmissions.
Note 3: During the U-NII Detection Bandwidth detection test, radar type 1 is used and for each
frequency step the minimum percentage of detection is 90 percent. Measurements are performed
with no data traffic.
Table 3-3: DFS Response Requirements
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 7 of 17
V 6.3
03/24/2017
3.3 DFS Detection Threshold Values
The DFS detection thresholds are defined for Master devices and Client Devices with In-service monitoring.
These detection thresholds are listed in the following table.
Maximum Transmit Power
Value
(See Notes 1 and 2)
≥ 200 milliwatt
-64 dBm
< 200 milliwatt
-62 dBm
Note 1: This is the level at the input of the receiver assuming a 0 dBi receive antenna.
Note 2: Throughout these test procedures an additional 1 dB has been added to the amplitude of
the test transmission waveforms to account for variations in measurement equipment. This will
ensure that the test signal is at or above the detection threshold level to trigger a DFS response.
Table 3-4: Detection Thresholds for Master Devices and Client Devices with Radar Detection
3.4 Parameters of DFS Test Signals
As the EUT is a Client Device with no Radar Detection only one type radar pulse is required for the testing.
Radar Pulse type 1 was used in the evaluation of the Client device for the purpose of measuring the Channel
Move Time and the Channel Closing Transmission Time. Table 3-5 lists the parameters for the Short Pulse
Radar Waveforms. A plot of the Radar Pulse Type 1 used for testing is included in Section 5.0 of this report.
Radar Type
Pulse Width
(μsec)
PRI
(μsec)
Number
of
Pulses
Minimum
Percentage of
Successful
Detection
Minimum
Number of
Trials
1428
18
60%
30
1-5
150-230
23-29
60%
30
6-10
200-500
16-18
60%
30
11-20
200-500
12-16
60%
30
80%
120
Aggregate (Radar Types 1-4)
Table 3-5: Parameters for Short Pulse Radar Waveforms
Radar
Type
Pulse
Width
(μsec)
Chirp
Width
(MHz)
PRI
(μsec)
Number
of Pulses
per Burst
Number
of Bursts
Minimum
Percentage of
Successful
Detection
Minimum
Number of
Trials
50 - 100
5 - 20
5 – 20
1-3
8 - 20
60%
30
Table 3-6. Parameters for Long Pulse Radar Waveforms
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 8 of 17
V 6.3
03/24/2017
Radar
Type
Pulse
Width
(μsec)
PRI
(μsec)
Pulses
per
Hop
Hopping
Rate
(kHz)
333
0.333
Hopping
Minimum
Sequence Percentage of
Length
Successful
(msec)
Detection
300
70%
Minimum
Number
of
Trials
30
Table 3-7. Parameters for Frequency Hopping Radar Waveforms
3.5 Procedure
KDB 905462 D02 v02 describes a radiated test setup and a conducted test setup. The conducted test setup
was used for this testing. Figure 3-1 shows the typical test setup. In Band 2A, one channel selected between
5260 and 5350 MHz is chosen for the testing. In Band 2C, one channel selected between 5500 and 5720
MHz was chosen for testing.
Figure 3-1. Conducted Test Setup for DFS
1. The “Aeroflex PXI DFS Radar Simulator and Analyzer Test Suite” is setup to provide a simulated
radar pulse at the frequency that the Master and Client are operating. A Type 0 radar pulse was used.
2. The Client Device (EUT) is set up per the diagram in Figure 3-1 and communications between the
Master device and the Client is established.
3. An MPEG or data file that is typical for the device is streamed from the Master to the Client to properly
load the network.
4. The “Aeroflex PXI DFS Radar Simulator and Analyzer Test Suite” is set to record and display 12
seconds of time, starting from where the simulated radar is generated. This time domain plot captures
any transmissions occurring up to and after 10sec. Aggregate time is computed to ensure
compliance. (Note: the channel may be different since the Master and Client have changed channels
due to the detection of the initial radar pulse.)
5. After the initial radar burst the channel is monitored for 10 minutes to ensure no transmissions or
beacons occur. A second monitoring setup is used to verify that the Master and Client have both
moved to different channels.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 9 of 17
V 6.3
03/24/2017
4.0 T E S T E Q U I P M E N T
Test Equipment Calibration is traceable to the National Institute of Standards and Technology (NIST).
Manufacturer Model
Aeroflex
Agilent
Seekonk
Description
Cal Date Cal Interval Cal Due Serial Number
PXI 82531 PXI DFS Radar Simulator & Analyzer 8/20/2014
E4448A PSA (3Hz‐50GHz) Spectrum Analyzer 3/1/2016
NC‐100
Torque Wrench 5/16", 8" lbs
3/2/2016
Biennial
Annual
Biennial
8/20/2016
1082329
3/1/2017 US42510244
3/2/2018
N/A
Table 4-1. Annual Test Equipment Calibration Schedule
Note:
For equipment listed above that has a calibration date or calibration due date that falls within the test date
range, care was taken to ensure that this equipment was used after the calibration date and before the
calibration due date.
4.1 Additional Equipment
The following equipment was used in support of the DFS testing.
Device
Master
Manufacturer
Model/Description
Description
S/N:
AIR-CAP2702E-A-K9
Access Point
FTX1834S05B
AIR-CT2504-K9 V03
Controller
PSZ18381P6K
Cisco Systems
Table 4-2. Support Equipment
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 10 of 17
V 6.3
03/24/2017
5.0 T E S T R E S U L T S
Channel Loading Notes:
Per KDB 905462 D02 v01, timing plots are required with calculations demonstrating a minimum channel
loading of approximately 17% or greater. For example, you can zero span the spectrum analyzer and
approximate the transmission time.
Figure 5-1. Band 2A Pulse Width
Figure 5-2. Band 2A Period
Channel Loading = Pulse Width / Period = 40 µs / 195 µs = 20.51 %
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 11 of 17
V 6.3
03/24/2017
Figure 5-3. Band 2C Pulse Width
Figure 5-4. Band 2C Period
Channel Loading = Pulse Width / Period = 70 µs / 145 µs = 48.28 %
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 12 of 17
V 6.3
03/24/2017
Move Time and Aggregate Time Notes:
1. Trigger Threshold was configured to only capture client pulses. The pulses shown in the plots below
have been determined to be from the Master AP.
2. Marker Info and Aggregate time results are shown on the right side of the plots below.
Figure 5-5. Band 2A Move Time and Aggregate Time
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 13 of 17
V 6.3
03/24/2017
Figure 5-6. Band 2C Move Time and Aggregate Time
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 14 of 17
V 6.3
03/24/2017
Figure 5-7. Band 2A Client Beacon Test – Monitoring live spectrum – Elapse time 10 minutes
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 15 of 17
V 6.3
03/24/2017
Figure 5-8. Band 2C Client Beacon Test – Monitoring live spectrum – Elapse time 10 minutes
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 16 of 17
V 6.3
03/24/2017
6.0 C O N C L U S I O N
The data collected relate only to the item(s) tested and show that the Samsung Portable Handset
FCC ID: A3LSMN935KOR is in compliance with the DFS requirements for a Client Device without radar
detection in accordance with Part 15.407 of the FCC Rules.
FCC Pt. 15.407 DFS TEST REPORT
(CERTIFICATION)
FCC ID:
A3LSMN935KOR
Test Report S/N:
Test Dates:
EUT Type:
1M1703230122-06.A3L
6/22/2016
Portable Handset
© 2017 PCTEST Engineering Laboratory, Inc.
Reviewed by:
Quality Manager
Page 17 of 17
V 6.3
03/24/2017
Download: SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Mirror Download [FCC.gov]SMN935KOR Multi-band GSM/EDGE/UMTS/LTE Phone with Bluetooth, WLAN, RFID and ANT+ Test Report DFS Samsung Electronics Co Ltd
Document ID3370846
Application IDtjv0swLDNzZioItdb7vbYg==
Document DescriptionDFS Test Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize67.11kB (838847 bits)
Date Submitted2017-04-25 00:00:00
Date Available2017-05-04 00:00:00
Creation Date2017-04-20 18:27:02
Producing SoftwareAcrobat Distiller 10.1.16 (Windows)
Document Lastmod2017-04-25 16:40:11
Document TitleDFS Test Report
Document CreatorPScript5.dll Version 5.2.2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : 
Create Date                     : 2017:04:20 18:27:02-04:00
Modify Date                     : 2017:04:25 16:40:11-04:00
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Creator Tool                    : PScript5.dll Version 5.2.2
Metadata Date                   : 2017:04:25 16:40:11-04:00
Producer                        : Acrobat Distiller 10.1.16 (Windows)
Format                          : application/pdf
Creator                         : 
Title                           : 
Document ID                     : uuid:0a9d31b7-f9cf-4763-aecd-24a2e0450052
Instance ID                     : uuid:17a7fa20-fb36-4f57-94bd-17242920b2da
Page Count                      : 17
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2017