FCC ID A4RGR83Y

Output power listed is ERP for operations below 1 GHz, EIRP for operations above 1 GHz, and conducted power for Part 90S (814-824 MHz).

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 14, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 38, Band 41, Band 71; 1.4/3/5/10 MHz in Band 5, Band 12; 1.4/3/5/10/15 MHz in Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66.

This device supports intra-band uplink carrier aggregation.

This device supports the following 5GNR bands and channel bandwidths: 5/10 MHz in Bands n14, n30; 5/10/15 MHz in Bands n12, n70; 5/10/15/20 MHz in Bands n5, n26, n71; 10/15/20/25/30/40 MHz in Bands n38; 5/10/15/20/25/30/40 MHz in Bands n2, n25, n66; 5/10/15/20/25/30/40/50 MHz in Bands n7; 10/15/20/25/30/40/50/60/70/80/90/100 MHz in Bands n41, n77 (3.5 and 3.7 GHz sub-bands), n78.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

The highest reported SAR values for head, body-worn, product specific (hot spot), extremity (10g), and simultaneous transmission exposure conditions are 0.99 W/kg, 0.99 W/kg, 0.85 W/kg, 2.48 W/kg(10g), and 1.59 W/kg & 2.51 W/kg (10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

Output power listed is ERP for operations below 1 GHz, EIRP for operations above 1 GHz, and conducted power for Part 90S (814-824 MHz).

This device supports the following LTE bands and channel bandwidths: 5/10 MHz in Band 13, Band 14, Band 17, Band 30; 5/10/15/20 MHz in Band 7, Band 38, Band 41, Band 71; 1.4/3/5/10 MHz in Band 5, Band 12; 1.4/3/5/10/15 MHz in Band 26; 1.4/3/5/10/15/20 MHz in Band 2, Band 4, Band 25, Band 66.

This device supports intra-band uplink carrier aggregation.

This device supports the following 5GNR bands and channel bandwidths: 5/10 MHz in Bands n14, n30; 5/10/15 MHz in Bands n12, n70; 5/10/15/20 MHz in Bands n5, n26, n71; 10/15/20/25/30/40 MHz in Bands n38; 5/10/15/20/25/30/40 MHz in Bands n2, n25, n66; 5/10/15/20/25/30/40/50 MHz in Bands n7; 10/15/20/25/30/40/50/60/70/80/90/100 MHz in Bands n41, n77 (3.5 and 3.7 GHz sub-bands), n78.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

The highest reported SAR values for head, body-worn, product specific (hot spot), extremity (10g), and simultaneous transmission exposure conditions are 0.99 W/kg, 0.99 W/kg, 0.85 W/kg, 2.48 W/kg(10g), and 1.59 W/kg & 2.51 W/kg (10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 230 kHz bandwidths for Band 255 (1.6 GHz) and Band 23 (2 GHz).

The highest reported SAR values for body-worn and extremity (10g) exposure conditions are 0.43 W/Kg and 1.83 W/Kg (10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device supports 230 kHz bandwidths for Band 255 (1.6 GHz) and Band 23 (2 GHz).

The highest reported SAR values for body-worn and extremity (10g) exposure conditions are 0.43 W/Kg and 1.83 W/Kg (10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

This device supports 2x2 MIMO operations and bandwidths up to 160MHz.

The highest reported SAR values for head, body-worn accessory, extremity (10g), and simultaneous transmission exposure conditions are 0.63 W/Kg, 0.14 W/Kg, 0.13 W/kg, 0.36 W/kg (10g), and 1.59 W/Kg & 2.51 W/kg(10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 2x2 MIMO operations and bandwidths up to 160MHz.

The highest reported SAR values for head, body-worn accessory, extremity (10g), and simultaneous transmission exposure conditions are 0.63 W/Kg, 0.14 W/Kg, 0.13 W/kg, 0.36 W/kg (10g), and 1.59 W/Kg & 2.51 W/kg(10g) respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 2x2 MIMO operations and bandwidths up to 20MHz for 802.11.

The highest reported SAR values for head, body-worn, product specific (hot spot) and simultaneous transmission exposure conditions are 1.12 W/kg, 0.85 W/kg, 0.45 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.

This device supports 2x2 MIMO operations and bandwidths up to 20MHz for 802.11.

The highest reported SAR values for head, body-worn, product specific (hot spot) and simultaneous transmission exposure conditions are 1.12 W/kg, 0.85 W/kg, 0.45 W/kg and 1.59 W/kg respectively. To satisfy FCC RF exposure compliance requirements, body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 10 mm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

HAC-2019. Conversational gain values of 16.89 dB (with hearing aid) and 18.00 dB (without hearing aid). HAC compliance assessed under waiver DA 23-914.