FCC ID ACJ9TGWW21B

Class II Permissive Change to allow use in portable host FZ-40(mk2) with co-located WLAN module ACJ9TGWL23B and RFID module ACJ9TGRI21A or ACJ9TGRI23A. Band 48 Antenna Gain is increased and output power is reduced to a maximum conducted power as addressed in the filing and Band 30 is disabled when installed in this host. Power out is conducted at the antenna terminal. Limited Single Modular Approval. This device is certified for mobile and fixed applications. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5MHz and 10 MHz bandwidth modes for LTE Bands 13/14/17; 5 MHz, 10 MHz, 15 MHz and20 MHz bandwidth modes for LTE Bands 7/38/41/71. This device also supports CA UL on the LTE Bands 7/38/41/66. This device also supports LTE Band 48 (CBRS) transmitter.