FCC ID ACJ9TGWW23D

Class II Permissive Change adding RF exposure condition for specific Panasonic Corporation of North America host model CF-33 as described in this filing and power reduction for LTE Band 42. The following bands have been disabled at factory via software: LTE Band 30 and Band 71, FR1 Bands n7/n12/n25/n41/n48/n71.

The highest reported Body SAR value is 0.73 W/kg. This module is co-located with a WLAN/BT module as detailed in this filing, the highest reported simultaneous transmission SAR value is 1.59 W/kg (1g simultaneous) for this host.

End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Bands 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/17; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/38/41/42

This device also supports CA UL on the LTE Bands 7/41/42

This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5; 5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66; 20 MHz, 30 MHz, 40MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR band n77 (n77 is only applicable in the ranges of 3450-3550 MHz and 3700-3980 MHz).

This device also contains LTE Band 48 (CBRS) transmitter.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

Class II Permissive Change adding RF exposure condition for specific Panasonic Corporation of North America host model CF-33 as described in this filing and power reduction for LTE Band 42. The following bands have been disabled at factory via software: LTE Band 30 and Band 71, FR1 Bands n7/n12/n25/n41/n48/n71.

The highest reported Body SAR value is 0.73 W/kg. This module is co-located with a WLAN/BT module as detailed in this filing, the highest reported simultaneous transmission SAR value is 1.59 W/kg (1g simultaneous) for this host.

End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/27/90. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Bands 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/17; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/38/41/42

This device also supports CA UL on the LTE Bands 7/41/42

This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5; 5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66; 20 MHz, 30 MHz, 40MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR band n77 (n77 is only applicable in the ranges of 3450-3550 MHz and 3700-3980 MHz).

This device also contains LTE Band 48 (CBRS) transmitter.

This device contains functions that are not operational in U.S. Territories; filings under this FCC ID are approved only for U.S. operations.

This device is certified for mobile and fixed applications. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use.

This device has 5 MHz, 10 MHz, 15 MHz and 20 MHZ bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band.

This device also contains LTE Bands 2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bands n2/n5/n7/n12/n25/n41/n66/n71/77.

This device is certified for mobile and fixed applications. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use.

This device has 5 MHz, 10 MHz, 15 MHz and 20 MHZ bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band.

This device also contains LTE Bands 2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bands n2/n5/n7/n12/n25/n41/n66/n71/77.

Class II Permissive Change adding RF exposure condition for specific Panasonic Corporation of North America host model CF-33 as described in this filing and power reduction for LTE Band 48. The following bands have been disabled at factory via software: LTE Band 30 and Band 71, FR1 Bands n7/n12/n25/n41/n48/n71.

The highest reported Body SAR value is 0.24 W/kg. This module is co-located with a WLAN/BT module as detailed in this filing., the highest reported simultaneous transmission SAR value is 1.59 W/kg (1g simultaneous) for this host.

Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use.

This device has 5 MHz, 10 MHz, 15 MHz and 20 MHZ bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band.

This device also contains LTE Bands 2/4/5/7/12/13/14/17/25/26/38/41/42/66/; and 5G NR (FR1, sub-5GHz) Bands n2/n5/n66/77.

Class II Permissive Change adding RF exposure condition for specific Panasonic Corporation of North America host model CF-33 as described in this filing and power reduction for LTE Band 48. The following bands have been disabled at factory via software: LTE Band 30 and Band 71, FR1 Bands n7/n12/n25/n41/n48/n71.

The highest reported Body SAR value is 0.24 W/kg. This module is co-located with a WLAN/BT module as detailed in this filing., the highest reported simultaneous transmission SAR value is 1.59 W/kg (1g simultaneous) for this host.

Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must ensure that the end user has no manual instructions to remove or install this module. Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use.

This device has 5 MHz, 10 MHz, 15 MHz and 20 MHZ bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band.

This device also contains LTE Bands 2/4/5/7/12/13/14/17/25/26/38/41/42/66/; and 5G NR (FR1, sub-5GHz) Bands n2/n5/n66/77.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits – this filing complies with KDB 447498 and is approved for mobile/fixed operation. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/227/90. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 20 MHZ bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Bands 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/17/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/38/41/42/71. This device also supports CA UL on the LTE Bands 7/38/41/42/66.

This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10 MHz and 15 MHz bandwidth modes for NR band n12; 5MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5/n7/n25/n71; 5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66; 20 MHz, 30 MHz, 40MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR bands n41/n77 (n77 is only applicable in the ranges of 3450-3550 MHz and 3700-3980 MHz).

This device also contains LTE Band 48 (CBRS) transmitter.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits – this filing complies with KDB 447498 and is approved for mobile/fixed operation. End -users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts 22/24/227/90. The Grantee is responsible for providing the documentation required for modular use.

This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 20 MHZ bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Bands 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands 13/14/17/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 7/38/41/42/71. This device also supports CA UL on the LTE Bands 7/38/41/42/66.

This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10 MHz and 15 MHz bandwidth modes for NR band n12; 5MHz, 10MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5/n7/n25/n71; 5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66; 20 MHz, 30 MHz, 40MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR bands n41/n77 (n77 is only applicable in the ranges of 3450-3550 MHz and 3700-3980 MHz).

This device also contains LTE Band 48 (CBRS) transmitter.