TCB Grant - Application IYePFXcU3010gbZWvqxeyQ==
This application does not exist.
EAS Grant - Application IYePFXcU3010gbZWvqxeyQ==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION |
COPY |
| Certification |
Kenwood USA Corporation
3970 Johns Creek Court
Suite 100
Suwanee, GA 30024
United States
|
|
Date of Grant: 11/25/2008
Application Dated: 12/10/1999
|
| |
| Attention: Joel Berger , Staff Engineer |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ALH30923120 |
|
|
| Name of Grantee: |
Kenwood USA Corporation |
|
|
| Equipment Class: |
Licensed Non-Broadcast Transmitter Held to Face |
| Notes: |
UHF FM Hand Held Transceiver |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| BG |
22, 90.210 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
11K0F3E
|
| BG |
22, 90 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
16K0F3E
|
| This application was originally granted on 02/16/2000. |
| BG: |
The output power is continuously variable from the value listed in this entry to 25%-30% of the value listed. |
| Mail To: |
| Morton Flom, P. Eng. |
| M. Flom Associates, Inc. |
| 3356 N. San Marcos Pl., Suite 107 |
| Chandler, AZ 85225-7176 |
| |
TCB Grant - Application +UjnUcXS3MvBrQRFfOTqjg==
| TCB |
GRANT OF EQUIPMENT
AUTHORIZATION |
TCB |
| Certification |
| Issued Under the Authority of the |
| Federal Communications Commission |
| By: |
|
|
ACB, Inc.
6731 Whittier Avenue
Suite C110
McLean, VA 22101
|
Date of Grant: 10/03/2008
Application Dated: 10/03/2008
|
| Kenwood USA Corporation |
| 3970 Johns Creek Court |
| Suite 100 |
Suwanee, GA 30024
|
| |
| Attention: Joel Berger , Staff Engineer |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ALH30923120 |
|
|
| Name of Grantee: |
Kenwood USA Corporation |
|
|
| Equipment Class: |
Licensed Non-Broadcast Transmitter Held to Face |
| Notes: |
UHF FM Hand Held Transceiver |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| BG |
22, 90.210 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
11K0F3E
|
| BG |
22, 90 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
16K0F3E
|
| This application was originally granted on 02/16/2000. Output is at the antenna terminal of the device. Power out is variable from 1 to 4W. SAR for body worn operation has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the device with a minimum of 2.5cm from the body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. SAR was evaluated for body worn and held-to-face operating modes. Maximum SAR values reported are: Body 4.68 w/kg. |
| BG: |
The output power is continuously variable from the value listed in this entry to 25%-30% of the value listed. |
EAS Grant - Application +UjnUcXS3MvBrQRFfOTqjg==
| COPY |
FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554
GRANT OF EQUIPMENT
AUTHORIZATION |
COPY |
| Certification |
Kenwood USA Corporation
3970 Johns Creek Court
Suite 100
Suwanee, GA 30024
United States
|
|
Date of Grant: 10/03/2008
Application Dated: 10/03/2008
|
| |
| Attention: Joel Berger , Staff Engineer |
|
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for
the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
|
|
|
| FCC IDENTIFIER: |
ALH30923120 |
|
|
| Name of Grantee: |
Kenwood USA Corporation |
|
|
| Equipment Class: |
Licensed Non-Broadcast Transmitter Held to Face |
| Notes: |
UHF FM Hand Held Transceiver |
| Modular Type: |
Does not apply |
| Grant Notes
| FCC Rule Parts
| Frequency
Range (MHZ)
| Output
Watts
| Frequency
Tolerance
| Emission
Designator
|
| BG |
22, 90.210 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
11K0F3E
|
| BG |
22, 90 |
470.0
-
490.0
|
4.0
|
2.5
PM
|
16K0F3E
|
| This application was originally granted on 02/16/2000. Output is at the antenna terminal of the device. Power out is variable from 1 to 4W. SAR for body worn operation has been tested and meets the FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the device with a minimum of 2.5cm from the body. End users must be informed of the body worn requirements for satisfying RF Exposure compliance. This transmitter may operate only with antennas as described in this filing. This device must transmit with a source-based time-averaging duty factor not exceeding 50%. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment. SAR was evaluated for body worn and held-to-face operating modes. Maximum SAR values reported are: Body 4.68 w/kg. |
| BG: |
The output power is continuously variable from the value listed in this entry to 25%-30% of the value listed. |
kenwoodusa.com 
mflom.com