1. FCC ID
  2. ALH
  3. ALH31103120

FCC ID ALH31103120

SINGLE CHANNEL MODE

by Kenwood USA Corporation

Grantee Code: ALH   Product Code: 31103120
Latest application date: 2004-11-24

FCC ID Device Details

FCC IDALH31103120
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeALH
Product Code31103120
Applicant BusinessKenwood USA Corporation 🇺🇸
Related Domains us.jvckenwood.com
Equipment ClassSINGLE CHANNEL MODE
Test FirmM. Flom Associates, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
136-152 MHzClass II permissive change or modification of presently authorized equipment2004-11-24
136-152 MHzOriginal Equipment2000-11-07

Exhibits

DocumentTypeAvailableFile
users manualUsers Manual2000-11-07PDF 19.5 KB
display card bottomInternal Photos2000-11-07PDF 14.1 KB
display card topInternal Photos2000-11-07PDF 12.8 KB
final bottomInternal Photos2000-11-07PDF 11.5 KB
final topInternal Photos2000-11-07PDF 14.8 KB
vco bottomInternal Photos2000-11-07PDF 17.9 KB
vco topInternal Photos2000-11-07PDF 16.6 KB
bottomExternal Photos2000-11-07PDF 16.6 KB
frontExternal Photos2000-11-07PDF 10 KB
leftExternal Photos2000-11-07PDF 9.5 KB
rearExternal Photos2000-11-07PDF 12 KB
rightExternal Photos2000-11-07PDF 9.3 KB
topExternal Photos2000-11-07PDF 14.9 KB
locationID Label/Location Info2000-11-07PDF 11 KB
sampleID Label/Location Info2000-11-07PDF 541.8 KB
RX VCOSchematics2000-11-07PDF 1.2 MB
TX VCOSchematics2000-11-07PDF 1.2 MB
TXRX leftSchematics2000-11-07PDF 1.1 MB
TXRX rightSchematics2000-11-07PDF 1.2 MB
control unit bottom leftSchematics2000-11-07PDF 498.9 KB
control unit bottom rightSchematics2000-11-07PDF 554.5 KB
control unit top leftSchematics2000-11-07PDF 490.2 KB
control unit top rightSchematics2000-11-07PDF 463.2 KB
display schematic leftSchematics2000-11-07PDF 1.1 MB
display schematic rightSchematics2000-11-07PDF 1.2 MB
final unit leftSchematics2000-11-07PDF 365.6 KB
final unit rightSchematics2000-11-07PDF 330.4 KB
circuit descriptionOperational Description2000-11-07PDF 24.2 KB
test reportTest Report2000-11-07PDF 246.8 KB
COVER LETTERCover Letter(s)2004-11-24PDF 739.3 KB
01 December reply to OET requestCover Letter(s)2000-11-07PDF 21 KB
MPE reportRF Exposure Info2000-11-07PDF 56.2 KB
parts listParts List/Tune Up Info2000-11-07PDF 81.4 KB
semiconductor 1Parts List/Tune Up Info2000-11-07PDF 120.4 KB
semiconductor 2Parts List/Tune Up Info2000-11-07PDF 20.5 KB
semiconductor 3Parts List/Tune Up Info2000-11-07PDF 22.3 KB
tune up procedureParts List/Tune Up Info2000-11-07PDF 16.2 KB

Application Information

Application IDIx+FVJWYcJGb7BQKdxCvqw==
Final Action Date2004-11-24
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0004356960
Model31103120
Frequency Range136-152 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionSINGLE CHANNEL MODE
Responsible PartyAngelina Seay, Regulatory Support Engineer, aseay@us.jvckenwood.com , 6784744701
Test FirmMorton Flom, M. Flom Associates, Inc., info@mflom.com , 480-926-3100
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThe antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 50 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance

Applications

Application IDDatePurpose
Ix+FVJWYcJGb7BQKdxCvqw==2004-11-24Class II permissive change or modification of presently authorized equipment
58wwL30lhMZQuTdxEBStNQ==2000-11-07Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
136-152 MHz502ppm16K0F3E9BM
136-152 MHz152ppm16K0F3E90, 90.21BM
136-152 MHz502ppm11K0F3E90.21BM
136-152 MHz502ppm16K0F3E90, 90.21BM
136-152 MHz152ppm11K0F3E90, 90.21BM
136-152 MHz502ppm11K0F3E90, 90.21BM

Grants

TCB Grant - Application Ix+FVJWYcJGb7BQKdxCvqw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 11/24/2004

Application Dated: 11/24/2004
Kenwood USA Corporation
5000 Research Ct
Suite 700
Suwanee, GA 30024
 
Attention: Angelina Seay , Regulatory Support Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ALH31103120
Name of Grantee:  Kenwood USA Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SINGLE CHANNEL MODE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BM 90, 90.210 136.0  -  152.0 15.0 2.0  PM 16K0F3E
BM 90, 90.210 136.0  -  152.0 50.0 2.0  PM 16K0F3E
BM 90, 90.210 136.0  -  152.0 15.0 2.0  PM 11K0F3E
BM 90, 90.210 136.0  -  152.0 50.0 2.0  PM 11K0F3E

The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 50 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance

BM: The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed.

EAS Grant - Application Ix+FVJWYcJGb7BQKdxCvqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Kenwood USA Corporation
5000 Research Ct Suite 700
Suwanee, GA 30024
United States 		  Date of Grant: 11/24/2004

Application Dated: 11/24/2004
 
Attention: Angelina Seay , Regulatory Support Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ALH31103120
Name of Grantee:  Kenwood USA Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: SINGLE CHANNEL MODE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BM 90, 90.210 136.0  -  152.0 15.0 2.0  PM 16K0F3E
BM 90, 90.210 136.0  -  152.0 50.0 2.0  PM 16K0F3E
BM 90, 90.210 136.0  -  152.0 15.0 2.0  PM 11K0F3E
BM 90, 90.210 136.0  -  152.0 50.0 2.0  PM 11K0F3E

The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 50 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance


BM: The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed.

TCB Grant - Application 58wwL30lhMZQuTdxEBStNQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
 Date of Grant: 11/07/2000

Application Dated: 11/07/2000
Kenwood USA Corporation
5000 Research Ct
Suite 700
Suwanee, GA 30024
 
Attention: Angelina Seay , Regulatory Support Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ALH31103120
Name of Grantee:  Kenwood USA Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Channel Mode
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BM 90 136.0  -  152.0 50.0 2.0  PM 16K0F3E
BM 90.210 136.0  -  152.0 50.0 2.0  PM 11K0F3E

The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 50 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.

BM: The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed.

EAS Grant - Application 58wwL30lhMZQuTdxEBStNQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Kenwood USA Corporation
5000 Research Ct Suite 700
Suwanee, GA 30024
United States 		  Date of Grant: 11/07/2000

Application Dated: 11/07/2000
 
Attention: Angelina Seay , Regulatory Support Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ALH31103120
Name of Grantee:  Kenwood USA Corporation
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: Single Channel Mode
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
BM 90 136.0  -  152.0 50.0 2.0  PM 16K0F3E
BM 90.210 136.0  -  152.0 50.0 2.0  PM 11K0F3E

The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 6 meters from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 50 W and the peak radiated output power must not exceed 1000 W EIRP. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of section 1.1307(b)(3), for satisfying RF exposure compliance.


BM: The output power is continuously variable from the value listed in this entry to 50%-55% of the value listed.

Mail To: