FCC ID APIAP72598V
AP72598V
by Harman International Industries, Inc
Grantee Code: API Product Code: AP72598V
Latest application date: 2024-04-14
FCC ID Device Details
| FCC ID | APIAP72598V |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | API |
| Product Code | AP72598V |
| Applicant Business | Harman International Industries, Inc 🇺🇸 |
| Related Domains |  harman.com |
| Equipment Class | AP72598V |
| Test Firm | TUV Rheinland (Shenzhen) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-14 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-14 |
| 2402-2480 MHz | Original Equipment | 2024-02-28 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-02-08 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-06-22 |
| 5745-5825 MHz | Original Equipment | 2022-05-16 |
| 2412-2462 MHz | Original Equipment | 2022-05-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual_Host_Compliance info | Users Manual | 2024-10-09 | PDF 1.7 MB |
| User Manual_Host_MA710 | Users Manual | 2024-10-09 | PDF 5.4 MB |
| User Manual_Host_MA7100HP, MA9100HP | Users Manual | 2024-10-09 | PDF 804.2 KB |
| User Manual | Users Manual | 2024-02-28 | PDF 1.1 MB |
| User Manual_Rev1 | Users Manual | 2024-02-08 | PDF 1.1 MB |
| User Manual_Rev1 | Users Manual | 2022-05-16 | PDF 2.2 MB |
| Internal Photos_Host_MA710 | Internal Photos | 2024-10-09 | PDF 4.9 MB |
| Internal Photos_MA7100HP | Internal Photos | 2024-10-09 | PDF 5 MB |
| Internal Photos_MA9100HP | Internal Photos | 2024-10-09 | PDF 4.9 MB |
| Internal photo | Internal Photos | 2024-02-28 | PDF 1.3 MB |
| External Photos_Host_MA710 | External Photos | 2024-10-09 | PDF 634.3 KB |
| External Photos_Host_MA7100HP | External Photos | 2024-10-09 | PDF 620.4 KB |
| External Photos_Host_MA9100HP | External Photos | 2024-10-09 | PDF 658.5 KB |
| External Photos | External Photos | 2024-02-28 | PDF 1.2 MB |
| External Photos_Rev1 | External Photos | 2022-06-22 | PDF 1.2 MB |
| Product Label and Location_Host_MA710 | ID Label/Location Info | 2024-04-14 | PDF 716.7 KB |
| Product Label and Location_Host_MA710 | ID Label/Location Info | 2024-04-14 | PDF 4.9 MB |
| Product Label and Location_Host_MA7100HP | ID Label/Location Info | 2024-04-14 | PDF 690.6 KB |
| Product Label and Location_Host_MA7100HP | ID Label/Location Info | 2024-04-14 | PDF 4.9 MB |
| Product Label and Location_Host_MA9100HP | ID Label/Location Info | 2024-04-14 | PDF 710.1 KB |
| Product Label and Location_Host_MA9100HP | ID Label/Location Info | 2024-04-14 | PDF 5 MB |
| Label and location_Rev1 | ID Label/Location Info | 2024-02-28 | PDF 182.2 KB |
| Confidential_Schematic | RF Exposure Info | 2022-05-16 | PDF 183.7 KB |
| Test Setup Photos | Test Setup Photos | 2024-10-09 | PDF 760.3 KB |
| Test Setup Photos | Test Setup Photos | 2024-02-28 | PDF 730.4 KB |
| Test Setup Photos_Rev1 | Test Setup Photos | 2022-06-22 | PDF 392.1 KB |
| Test Setup Photos | Test Setup Photos | 2022-05-16 | PDF 418 KB |
| Antenna Gain Info | Test Report | 2024-04-14 | PDF 1 MB |
| Test Report | Test Report | 2024-04-14 | PDF 1.3 MB |
| 240100930SHA-001_Report_15.247-BT_1 | Test Report | 2024-02-28 | PDF 5.3 MB |
| 240100930SHA-001_Report_15.247-BT_2 | Test Report | 2024-02-28 | PDF 2.3 MB |
| 220201028SHA-007_ Appendix A_Ant0_Band edge_Rev1 | Test Report | 2022-06-22 | PDF 1.9 MB |
| 220201028SHA-007_ Appendix A_Ant0_RSE_Rev1 | Test Report | 2022-06-22 | PDF 3.4 MB |
| 220201028SHA-007_ Appendix A_Ant1_Band edge_Rev1 | Test Report | 2022-06-22 | PDF 1.9 MB |
| 220201028SHA-007_ Appendix A_Ant1_RSE_Rev1 | Test Report | 2022-06-22 | PDF 3.4 MB |
| 220201028SHA-007_Report_15.247-WIFI_Rev1 | Test Report | 2022-06-22 | PDF 711.5 KB |
| 220201028SHA-008_ Appendix A_Ant0_Band edge_Rev2_Part1 | Test Report | 2022-06-22 | PDF 5.5 MB |
| 220201028SHA-008_ Appendix A_Ant0_Band edge_Rev2_Part2 | Test Report | 2022-06-22 | PDF 2.9 MB |
| 220201028SHA-008_ Appendix A_Ant0_RSE_Rev1_Part1 | Test Report | 2022-06-22 | PDF 5.4 MB |
| 220201028SHA-008_ Appendix A_Ant0_RSE_Rev1_Part2 | Test Report | 2022-06-22 | PDF 5.5 MB |
| 220201028SHA-008_ Appendix A_Ant0_RSE_Rev1_Part3 | Test Report | 2022-06-22 | PDF 5.2 MB |
| 220201028SHA-008_ Appendix A_Ant1_Band edge_Rev1_Part1 | Test Report | 2022-06-22 | PDF 5.5 MB |
| 220201028SHA-008_ Appendix A_Ant1_Band edge_Rev1_Part2 | Test Report | 2022-06-22 | PDF 2.9 MB |
| 220201028SHA-008_ Appendix A_Ant1_RSE_Rev1_Part1 | Test Report | 2022-06-22 | PDF 5.4 MB |
| 220201028SHA-008_ Appendix A_Ant1_RSE_Rev1_Part2 | Test Report | 2022-06-22 | PDF 5.5 MB |
| 220201028SHA-008_ Appendix A_Ant1_RSE_Rev1_Part3 | Test Report | 2022-06-22 | PDF 5.2 MB |
| 220201028SHA-008_Report_15.407-5G WiFi_Rev2 | Test Report | 2022-06-22 | PDF 774.9 KB |
| 220201028SHA-009_ Appendix A_Ant0_Band edge | Test Report | 2022-06-22 | PDF 1.6 MB |
| 220201028SHA-009_ Appendix A_Ant0_RSE | Test Report | 2022-06-22 | PDF 2.8 MB |
| 220201028SHA-009_ Appendix A_Ant1_Band edge | Test Report | 2022-06-22 | PDF 1.6 MB |
| 220201028SHA-009_ Appendix A_Ant1_RSE | Test Report | 2022-06-22 | PDF 2.9 MB |
| 220201028SHA-009_Report_15.247-BLE_Rev1 | Test Report | 2022-06-22 | PDF 723.6 KB |
| 220201028SHA-001_Report_15.247-WIFI | Test Report | 2022-05-16 | PDF 962.9 KB |
| 220201028SHA-001_Report_15.247-WIFI Appendix A_1_Rev2 | Test Report | 2022-05-16 | PDF 4.8 MB |
| 220201028SHA-001_Report_15.247-WIFI Appendix A_2_Rev2 | Test Report | 2022-05-16 | PDF 4.7 MB |
| 220201028SHA-002_Report_15.407-5G WiFi Appendix A_Rev1 | Test Report | 2022-05-16 | PDF 5.2 MB |
| 220201028SHA-002_Report_15.407-5G WiFi Appendix B_Rev1 | Test Report | 2022-05-16 | PDF 5.2 MB |
| 220201028SHA-002_Report_15.407-5G WiFi Appendix C_1_Rev1 | Test Report | 2022-05-16 | PDF 2.9 MB |
| 220201028SHA-002_Report_15.407-5G WiFi Appendix C_2_Rev1 | Test Report | 2022-05-16 | PDF 3.4 MB |
| 220201028SHA-002_Report_15.407-5G WiFi Appendix D_Rev1 | Test Report | 2022-05-16 | PDF 4.8 MB |
| 220201028SHA-002_Report_15.407-5G WiFi_Rev1 | Test Report | 2022-05-16 | PDF 1.5 MB |
| 220201028SHA-003_Report_15.247-BLE Appendix A_Rev1 | Test Report | 2022-05-16 | PDF 1.5 MB |
| 220201028SHA-003_Report_15.247-BLE Appendix A_Rev2 | Test Report | 2022-05-16 | PDF 1.5 MB |
| 220201028SHA-003_Report_15.247-BLE_Rev1 | Test Report | 2022-05-16 | PDF 874.4 KB |
| 220201028SHA-006_Report_DFS_FCC Part 15.407_Rev1 | Test Report | 2022-05-16 | PDF 657.1 KB |
| Attestation of US Agent | Attestation Statements | 2024-04-14 | PDF 86.8 KB |
| Not Covered Entity Applicant Attestation | Attestation Statements | 2024-04-14 | PDF 92 KB |
| Not Covered Equipment Attestation | Attestation Statements | 2024-04-14 | PDF 93.5 KB |
| ACB-FORM-FCC-Application-Letters-Covered-List-Attestation | Attestation Statements | 2024-02-28 | PDF 184.3 KB |
| ACB-FORM-FCC-Application-Letters-U.S.-Agent-Letter-for-Service-of-Process - | Attestation Statements | 2024-02-28 | PDF 151.3 KB |
| Agency Letter | Cover Letter(s) | 2024-04-14 | PDF 104.6 KB |
| C2PC letter | Cover Letter(s) | 2024-04-14 | PDF 87 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-04-14 | PDF 125.2 KB |
| ACB-FORM-FCC-Application-Letters-Agency-Letter | Cover Letter(s) | 2024-02-28 | PDF 83.2 KB |
| ACB-FORM-FCC-Application-Letters-Confidentiality-Letter | Cover Letter(s) | 2024-02-28 | PDF 266.8 KB |
| FCC C2PC Cover letter | Cover Letter(s) | 2024-02-28 | PDF 152.1 KB |
| ACB-FORM-FCC-Application-Letters-Agency-Letter | Cover Letter(s) | 2022-06-22 | PDF 193.2 KB |
| Cover Letter-PC II_FCC | Cover Letter(s) | 2022-06-22 | PDF 119.1 KB |
| ACB-FORM-FCC-Application-Letters-Confidentiality-Letter | Cover Letter(s) | 2022-05-16 | PDF 258.2 KB |
| ACB-FORM-FCC-Modular-Letter_Rev1 | Cover Letter(s) | 2022-05-16 | PDF 182.2 KB |
| Declaration letter 12,13 channel | Cover Letter(s) | 2022-05-16 | PDF 176.5 KB |
| SDR or Non-SDR device Cover Letter | Cover Letter(s) | 2022-05-16 | PDF 159.8 KB |
| RF Exposure Info | RF Exposure Info | 2024-04-14 | PDF 120.5 KB |
| 240100930SHA-002_Report_FCC_MPE rev1 | RF Exposure Info | 2024-02-28 | PDF 291.5 KB |
| 220201028SHA-004_Report_FCC_MPE | RF Exposure Info | 2022-05-16 | PDF 319.4 KB |
| Confidential_Block Diagram Metadata only | Block Diagram | PDF 114.1 KB | |
| Confidential_Schematic Metadata only | Schematics | PDF 183.7 KB | |
| Confidential_Operation Description Metadata only | Operational Description | PDF 126.5 KB | |
| Confidential_Operation Description Metadata only | Operational Description | PDF 203 KB | |
| Security for sofware Metadata only | SDR Software/Security Inf | PDF 192.8 KB |
Application Information
| Application ID | MlVHXo+ekyqE0EeymtwmMw== |
|---|---|
| Final Action Date | 2024-04-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024748147 |
| Model | AP72598V |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | AP72598V |
| Responsible Party | Terry Shi, Prin.Engineer,Regulatory Compliance, Quality, terry.shi@harman.com , 86-75523189391 |
| Technical Contact | Terry Shi, Harman International Industries, Inc, terry.shi@harman.com , 818-895-8173 |
| Test Firm | Gina Yang, TUV Rheinland (Shenzhen) Co., Ltd., Gina.Yang@tuv.com  , 86 755 8268 1497 |
| TCB Email | tcb-hotline@tuv.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 10/08/2024 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class 2 Permissive Change to incorporate the subject approved modular into the JBL MA series AV Receiver (Models: MA710, MA7100HP, MA9100HP). The Host devices also contains an approved Bluetooth Modular with FCC ID: API-QCC5181. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains 5 GHz WLAN transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| MlVHXo+ekyqE0EeymtwmMw== | 2024-04-14 | Class II permissive change or modification of presently authorized equipment |
| ErqUTebDQSUVWdYwr6kYXw== | 2024-04-14 | Class II permissive change or modification of presently authorized equipment |
| FDVowJpzgZrzFc/+1YE1Ow== | 2024-02-28 | Original Equipment |
| hzin9N5hmv2fMV6kFDGc7w== | 2024-02-08 | Class II permissive change or modification of presently authorized equipment |
| SKGHdjIXiS/e0jTkrVkozQ== | 2024-02-08 | Class II permissive change or modification of presently authorized equipment |
| XURzG7WoSwx0gTQIuLPMTg== | 2022-06-22 | Class II permissive change or modification of presently authorized equipment |
| RpHVgcvwBHPxLC1Cez4opg== | 2022-06-22 | Class II permissive change or modification of presently authorized equipment |
| yiPiM5k72/QkyD73q06P2w== | 2022-05-16 | Original Equipment |
| p2MUEqbPsBK+fsU235qgtw== | 2022-05-16 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application yiPiM5k72/QkyD73q06P2w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/16/2022 Application Dated: 05/16/2022 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application yiPiM5k72/QkyD73q06P2w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 05/16/2022 Application Dated: 05/16/2022 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/22/2022 Application Dated: 06/21/2022 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| This is a C2PC application to add three antennas. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application XURzG7WoSwx0gTQIuLPMTg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 06/22/2022 Application Dated: 06/21/2022 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| This is a C2PC application to add three antennas. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 02/08/2024 Application Dated: 02/06/2024 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE, Bluetooth and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application SKGHdjIXiS/e0jTkrVkozQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 02/08/2024 Application Dated: 02/06/2024 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains BLE, Bluetooth and 2.4 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 06/22/2022 Application Dated: 06/21/2022 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| This is a C2PC application to add three antennas. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains BLE, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application RpHVgcvwBHPxLC1Cez4opg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 06/22/2022 Application Dated: 06/21/2022 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| This is a C2PC application to add three antennas. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains BLE, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 05/16/2022 Application Dated: 05/16/2022 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains BLE, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application p2MUEqbPsBK+fsU235qgtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 05/16/2022 Application Dated: 05/16/2022 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains BLE, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 04/14/2024 Application Dated: 04/12/2024 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| Class 2 Permissive Change to incorporate the subject approved modular into the JBL MA series AV Receiver (Models: MA710, MA7100HP, MA9100HP). The Host devices also contains an approved Bluetooth Modular with FCC ID: API-QCC5181. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains 5 GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application MlVHXo+ekyqE0EeymtwmMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 04/14/2024 Application Dated: 04/12/2024 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| Class 2 Permissive Change to incorporate the subject approved modular into the JBL MA series AV Receiver (Models: MA710, MA7100HP, MA9100HP). The Host devices also contains an approved Bluetooth Modular with FCC ID: API-QCC5181. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains 5 GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 02/08/2024 Application Dated: 02/06/2024 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains Bluetooth, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application hzin9N5hmv2fMV6kFDGc7w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 02/08/2024 Application Dated: 02/06/2024 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.24 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device has only 20 MHz bandwidth mode at 2.4 GHz WLAN and it contains Bluetooth, and 5 GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 313 Park Avenue Suite 300 Falls Church, VA 22046 |
Date of Grant: 02/28/2024 Application Dated: 02/06/2024 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AP72598V |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device also contains BLE, 2.4GHz WLAN and 5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application FDVowJpzgZrzFc/+1YE1Ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 02/28/2024 Application Dated: 02/06/2024 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AP72598V |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| This is a C2PC application to add Bluetooth Classical (BR+EDR) function by updating software version. Power Output listed is conducted. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device also contains BLE, 2.4GHz WLAN and 5GHz WLAN transmitters. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV Rheinland of North America, Inc. 1279 Quarry Lane Suite A Pleasanton, CA 94566 |
Date of Grant: 04/14/2024 Application Dated: 04/14/2024 |
| Harman International Industries, Inc |
| 8500 Balboa Boulevard |
| Northridge, CA 91329 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| Class 2 Permissive Change to incorporate the subject approved modular into the JBL MA series AV Receiver (Models: MA710, MA7100HP, MA9100HP). The Host devices also contains an approved Bluetooth Modular with FCC ID: API-QCC5181. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains a 2.4 GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application ErqUTebDQSUVWdYwr6kYXw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Harman International Industries, Inc 8500 Balboa Boulevard Northridge, CA 91329 United States |
Date of Grant: 04/14/2024 Application Dated: 04/14/2024 |
| Attention: Terry Shi , Prin.Engineer,Regulatory Compliance, Quality |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | APIAP72598V |
| Name of Grantee: | Harman International Industries, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP72598V |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.111 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.104 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.107 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.107 |
| Class 2 Permissive Change to incorporate the subject approved modular into the JBL MA series AV Receiver (Models: MA710, MA7100HP, MA9100HP). The Host devices also contains an approved Bluetooth Modular with FCC ID: API-QCC5181. Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This DUT can only be installed at 20 cm minimum separation distance from human. This device supports 20 MHz, 40 MHz and 80 MHz BW modes in 5G WLAN transmitter. It also contains a 2.4 GHz WLAN transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |