FCC ID B94-HNC04PDCP2

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

HP Inc.

3390 East Harmony Road

Fort Collins, CO 80528

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5250.0	0.188
CC MO	15E	5260.0  -  5320.0	0.193
CC MO	15E	5500.0  -  5720.0	0.201
CC MO	15E	5745.0  -  5825.0	0.212

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5250.0	0.188
CC MO	15E	5260.0  -  5320.0	0.193
CC MO	15E	5500.0  -  5720.0	0.201
CC MO	15E	5745.0  -  5825.0	0.212

Power Output listed is conducted. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multitransmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.95W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application ygx8T9oIYYlM2/YsmAJLHA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

HP Inc.

3390 East Harmony Road

Fort Collins, CO 80528

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	826.4  -  846.6	0.319	0.005  PM	4M09F9W
	22H	824.7  -  848.3	0.25	0.005  PM	9M01G7D
	22H	824.7  -  848.3	0.192	0.005  PM	9M00W7D
	22H	824.7  -  848.3	0.251	0.005  PM	13M5G7D
	22H	824.7  -  848.3	0.193	0.005  PM	13M5W7D
	24E	1852.4  -  1907.6	0.594	0.002  PM	4M08F9W
	24E	1850.7  -  1909.3	0.64	0.002  PM	18M0G7D
	24E	1850.7  -  1909.3	0.502	0.002  PM	18M0W7D
	27	2502.5  -  2567.5	0.785	0.002  PM	18M0G7W
	27	2502.5  -  2567.5	0.627	0.002  PM	18M0W7D
	27	2572.5  -  2617.5	0.601	0.002  PM	18M0G7D
	27	2572.5  -  2617.5	0.468	0.002  PM	18M0W7D
	27	2498.5  -  2687.5	0.635	0.002  PM	18M0G7D
	27	2498.5  -  2687.5	0.504	0.002  PM	18M0W7D
	27	2307.5  -  2312.5	0.249	0.002  PM	8M97G7D
	27	2307.5  -  2312.5	0.077	0.002  PM	8M98W7D
	27	1712.4  -  1752.6	0.859	0.002  PM	4M08F9W
	27	1710.7  -  1754.3	0.647	0.002  PM	18M0G7D
	27	1710.7  -  1754.3	0.508	0.002  PM	18M0W7D
	27	699.7  -  715.3	0.241	0.006  PM	9M00G7D
	27	699.7  -  715.3	0.185	0.006  PM	9M00W7D
	27	779.5  -  784.5	0.253	0.005  PM	8M97G7D
	27	779.5  -  784.5	0.2	0.005  PM	8M96W7D
	27	706.5  -  713.5	0.247	0.006  PM	8M99G7D
	27	706.5  -  713.5	0.195	0.006  PM	9M99W7D
	27	1710.7  -  1779.3	0.687	0.002  PM	18M0G7D
	27	1710.7  -  1779.3	0.538	0.002  PM	18M0W7D
	90	814.7  -  823.3	0.23	0.005  PM	9M02G7D
	90	814.7  -  823.3	0.172	0.005  PM	9M01W7D

Limited Modular Approval.Output power is ERP for Part 22, Part 27(Below 1 GHz) and Part 90; EIRP for Part 24 and Part 27 (Above 1 GHz). This grant is valid only when the module is sold to OEM integrator and must be installed by the OEM or OEM integrator. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.49W/kg respectively. SAR Testing was performed to demonstrate mobile/portable RF compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	22H	826.4  -  846.6	0.319	0.005  PM	4M09F9W
	22H	824.7  -  848.3	0.25	0.005  PM	9M01G7D
	22H	824.7  -  848.3	0.192	0.005  PM	9M00W7D
	22H	824.7  -  848.3	0.251	0.005  PM	13M5G7D
	22H	824.7  -  848.3	0.193	0.005  PM	13M5W7D
	24E	1852.4  -  1907.6	0.594	0.002  PM	4M08F9W
	24E	1850.7  -  1909.3	0.64	0.002  PM	18M0G7D
	24E	1850.7  -  1909.3	0.502	0.002  PM	18M0W7D
	27	2502.5  -  2567.5	0.785	0.002  PM	18M0G7W
	27	2502.5  -  2567.5	0.627	0.002  PM	18M0W7D
	27	2572.5  -  2617.5	0.601	0.002  PM	18M0G7D
	27	2572.5  -  2617.5	0.468	0.002  PM	18M0W7D
	27	2498.5  -  2687.5	0.635	0.002  PM	18M0G7D
	27	2498.5  -  2687.5	0.504	0.002  PM	18M0W7D
	27	2307.5  -  2312.5	0.249	0.002  PM	8M97G7D
	27	2307.5  -  2312.5	0.077	0.002  PM	8M98W7D
	27	1712.4  -  1752.6	0.859	0.002  PM	4M08F9W
	27	1710.7  -  1754.3	0.647	0.002  PM	18M0G7D
	27	1710.7  -  1754.3	0.508	0.002  PM	18M0W7D
	27	699.7  -  715.3	0.241	0.006  PM	9M00G7D
	27	699.7  -  715.3	0.185	0.006  PM	9M00W7D
	27	779.5  -  784.5	0.253	0.005  PM	8M97G7D
	27	779.5  -  784.5	0.2	0.005  PM	8M96W7D
	27	706.5  -  713.5	0.247	0.006  PM	8M99G7D
	27	706.5  -  713.5	0.195	0.006  PM	9M99W7D
	27	1710.7  -  1779.3	0.687	0.002  PM	18M0G7D
	27	1710.7  -  1779.3	0.538	0.002  PM	18M0W7D
	90	814.7  -  823.3	0.23	0.005  PM	9M02G7D
	90	814.7  -  823.3	0.172	0.005  PM	9M01W7D

Limited Modular Approval.Output power is ERP for Part 22, Part 27(Below 1 GHz) and Part 90; EIRP for Part 24 and Part 27 (Above 1 GHz). This grant is valid only when the module is sold to OEM integrator and must be installed by the OEM or OEM integrator. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions.OEM integrator and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 1.27W/kg and 1.49W/kg respectively. SAR Testing was performed to demonstrate mobile/portable RF compliance.

TCB Grant - Application xFl9YIXTMDivrgLZ/pVTTw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

HP Inc.

3390 East Harmony Road

Fort Collins, CO 80528

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Part 15 Class B Computing Device Peripheral
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15B	-

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Nhj6s0Eiy/eNwTgnbe0e/g==

EAS Grant - Application Nhj6s0Eiy/eNwTgnbe0e/g==

TCB Grant - Application ISUqRpH1ISVvxGprNu+0xQ==

EAS Grant - Application ISUqRpH1ISVvxGprNu+0xQ==

TCB Grant - Application iLLGDWHm0v7xKXmlYg9AEQ==

EAS Grant - Application iLLGDWHm0v7xKXmlYg9AEQ==

TCB Grant - Application e+f0bJ8bxMoIVYGzGJhyzA==

EAS Grant - Application e+f0bJ8bxMoIVYGzGJhyzA==

TCB Grant - Application dEb5aG6A+I59mk+FEp2xsA==

EAS Grant - Application dEb5aG6A+I59mk+FEp2xsA==

TCB Grant - Application ddr8/lK/hW8jsNli+GisVg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

HP Inc.

3390 East Harmony Road

Fort Collins, CO 80528

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Digital Transmission System
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.009
CC MO	15C	2412.0  -  2472.0	1.0

Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device has 20 and 40 MHz bandwidth modes. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Digital Transmission System
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.009
CC MO	15C	2412.0  -  2472.0	1.0

Power Output listed is conducted. Power output has been reduced at the upper bandedge channels as shown in filings under this FCC ID. Limited Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. This device has 20 and 40 MHz bandwidth modes. The highest reported Body and Simultaneous SAR values are 0.92W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application D5sVGnlgGo5CHbNcS09gFA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

HP Inc.

3390 East Harmony Road

Fort Collins, CO 80528

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.01

Power Output listed is conducted. Limited Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

HP Inc. 3390 East Harmony Road Fort Collins, CO 80528 United States

Date of Grant: 09/26/2019 Application Dated: 09/26/2019

Attention: Richard Tarsio , US Canada Technical Regulations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	B94HNC04PDCP2
Name of Grantee:	HP Inc.
Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Model HSN-C04C PC
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.01

Power Output listed is conducted. Limited Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.11W/kg and 1.49W/kg respectively. SAR testing was performed to demonstrate mobile/portable RF compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: