VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.

HP Inc. HP Sprocket 2-in-1 Printer

FCC ID Filing: B94VCVRA1714
Purchase on Amazon: HP Sprocket 2-in-1 Printer

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Page 2 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Page 3 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Page 4 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Page 5 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Page 6 of VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.

RF Exposure Report
Report No.: SA170726E03
FCC ID: B94VCVRA1714
Test Model: VCVRA-1714
Received Date: July 26, 2017
Test Date: Aug. 22, 2017
Issued Date: Sep. 07, 2017
Applicant: HP Inc.
Address: 3390 East Harmony Road, Fort Collins, Colorado , United States 80528
Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch
Hsin Chu Laboratory
Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300,
Taiwan R.O.C.
This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted
only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this
report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product
unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you
provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided,
however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time
shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific
mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report
must not be used by the client to claim product certification, approval, or endorsement by any government agencies.
Report No.: SA170726E03
Page No. 1 / 6
Report Format Version: 6.1.1
Table of Contents
Release Control Record .................................................................................................................................. 3
Certificate of Conformity ...................................................................................................................... 4
Evaluation Result .................................................................................................................................. 5
SAR Test Exclusion Thresholds .......................................................................................................... 6
Conclusion ............................................................................................................................................ 6
Report No.: SA170726E03
Page No. 2 / 6
Report Format Version: 6.1.1
Release Control Record
Issue No.
Description
Date Issued
SA170726E03
Original release.
Sep. 07, 2017
Report No.: SA170726E03
Page No. 3 / 6
Report Format Version: 6.1.1
1
Certificate of Conformity
Product: HP Sprocket 2-in-1 Printer
Brand: hp
Test Model: VCVRA-1714
Sample Status: MASS-PRODUCTION
Applicant: HP Inc.
Test Date: Aug. 22, 2017
Standards: FCC Part 2 (Section 2.1093)
KDB 447498 D01 General RF Exposure Guidance v06
IEEE C95.1-1992
The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd.,
Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data
evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts
of the measurements of the sample’s EMC characteristics under the conditions specified in this report.
Prepared by :
Date:
Sep. 07, 2017
Date:
Sep. 07, 2017
Wendy Wu / Specialist
Approved by :
May Chen / Manager
Report No.: SA170726E03
Page No. 4 / 6
Report Format Version: 6.1.1
2
Evaluation Result
Following FCC KDB 447498 D01 “General SAR test exclusion guidance”
The corresponding SAR Exclusion Threshold condition, listed below:
1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50
mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)]
≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where



The test exclusions are applicable only
when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100
MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied
to determine SAR test exclusion.
2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is
determined according to the following:
a) [Threshold at 50 mm in step 1) + (test separation distance - 50mm)·( f(MHz)/150)] mW, at 100MHz to
1500 MHz
b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6
GHz
3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion.
a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 +
log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm.
b) The threshold determined by the equation in a) for 50 mm and 100 MHz is multiplied by ½ for test
separation distances ≤ 50 mm.
c) SAR measurement procedures are not established below 100 MHz. When SAR test exclusion cannot
be applied, a KDB inquiry is required to determine SAR evaluation requirements for any test results to
be acceptable.
Report No.: SA170726E03
Page No. 5 / 6
Report Format Version: 6.1.1
3
SAR Test Exclusion Thresholds
BT-EDR Avg. Power Table
GFSK
Channel
Frequency (MHz)
Peak Power
8DPSK
Avg. Power
Peak Power
Avg. Power
(dBm)
(mW)
(dBm)
(mW)
(dBm)
(mW)
(dBm)
(mW)
2402
1.74
1.493
0.54
1.132
0.49
1.119
-1.12
0.7727
39
2441
1.91
1.552
0.69
1.172
0.83
1.211
-0.85
0.8222
78
2480
1.89
1.545
0.66
1.164
0.81
1.205
-0.91
0.811
For BT-EDR SAR Test Exclusion Thresholds
Frequency
(GHz)
Max Avg.
Power
(dBm)
*Max Time
Avg. Power
(dBm)
Max Time
Avg. Power
(mW)
Min. test
separation
distance
(mm)
SAR test
exclusion
calculation
(NOTE 1)
value
10-g
extremity
SAR test
exclusion
thresholds
Result
2.402 ~ 2.480
0.69
-14.36
0.037
0.012
7.5
Pass
1. Calculate SAR test exclusion thresholds from condition “1” formulas.
2. *Time Avg. Power=Avg. Power+Duty factor
NOTE:
BT-EDR Duty Cycle of Test Signal
Duty Cycle
Tx on
(ms)
Tx total
(ms)
Duty Factor (dB)
3.125
296.25
-15.05
NOTE: 1.The DH5 packet was the worse case duty cycle for a transmit dwell time on a channel, based upon
bluetooth theory the transmitter is on 0.625 * 5 per 296.25 ms per channel. Therefore, the duty cycle
correlation factor be equal to: 10log(3.125 / 100)= -15.05 dB
Conclusion
Since Source-base time average power is below SAR test exclusion power thresholds, the SAR evaluation is
not required.
--- END ---
Report No.: SA170726E03
Page No. 6 / 6
Report Format Version: 6.1.1
Download: VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Mirror Download [FCC.gov]VCVRA1714 HP Sprocket 2-in-1 Printer RF Exposure Info 1 HP Inc.
Document ID3557514
Application IDzQvTn2lhbVGSixq8KpgCBg==
Document DescriptionRF Exposure Information MPE
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize19.63kB (245332 bits)
Date Submitted2017-09-12 00:00:00
Date Available2017-09-12 00:00:00
Creation Date2017-09-07 19:39:40
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2017-09-07 19:39:50
Document TitleRF Exposure Info 1
Document CreatorMicrosoft® Office Word 2007
Document Author: Jim

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : Jim
Create Date                     : 2017:09:07 19:39:40+08:00
Modify Date                     : 2017:09:07 19:39:50+08:00
Language                        : zh-TW
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Format                          : application/pdf
Creator                         : Jim
Title                           : 1
Creator Tool                    : Microsoft® Office Word 2007
Metadata Date                   : 2017:09:07 19:39:50+08:00
Producer                        : Microsoft® Office Word 2007
Document ID                     : uuid:0048d94c-3f25-491e-83d1-bea261435835
Instance ID                     : uuid:7ec17a9b-d260-460f-b62c-dbcea72ac067
Page Count                      : 6

Facebook Twitter Google+ RSS © FCCID.io 2017