FCC ID BEJTM19FNEUHD2

This device is authorized for installation in LG Electronics USA, Inc. devices, and may not be marketed to the general public. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons during normal operation, and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

This device supports the following LTE bands and channel bandwidths: 1.4/3/5/10/15/20 MHz in Bands B2, B66; 1.4/3/5/10 MHz in Band B5; 5/10/15/20 MHz in Bands B7, B38, B41, B42;

This device supports the following 5G NR bands and channel bandwidths: 5/10/15/20 MHz in Band n5; 5/10/15/20/25/30/40 MHz in Band n7; 20/30/40/50/60/70/80/90/100 MHz in Bands n41, n77, n78;

This device is authorized for installation in LG Electronics USA, Inc. devices, and may not be marketed to the general public. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons during normal operation, and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

This device supports the following LTE bands and channel bandwidths: 1.4/3/5/10/15/20 MHz in Bands B2, B66; 1.4/3/5/10 MHz in Band B5; 5/10/15/20 MHz in Bands B7, B38, B41, B42;

This device supports the following 5G NR bands and channel bandwidths: 5/10/15/20 MHz in Band n5; 5/10/15/20/25/30/40 MHz in Band n7; 20/30/40/50/60/70/80/90/100 MHz in Bands n41, n77, n78;

CIIPC to add 5G NR Band n26.

This device is authorized for installation in LG Electronics USA, Inc. devices, and may not be marketed to the general public. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons during normal operation, and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

This device supports the following LTE bands and channel bandwidths: 1.4/3/5/10/15/20 MHz in Bands B2, B66; 1.4/3/5/10 MHz in Band B5; 5/10/15/20 MHz in Bands B7, B38, B41, B42;

This device supports the following 5G NR bands and channel bandwidths: 5/10/15/20 MHz in Band n5 and n26; 5/10/15/20/25/30/40 MHz in Band n7; 20/30/40/50/60/70/80/90/100 MHz in Bands n41, n77, n78;

CIIPC to add 5G NR Band n26.

This device is authorized for installation in LG Electronics USA, Inc. devices, and may not be marketed to the general public. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons during normal operation, and must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Installers and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

For LTE / 5GNR the line entries are the highest measured total power and widest bandwidth within each band for each emissions designator (G7D for QPSK, W7D for QAM) for single carrier LTE / 5GNR operations within each band.

This device supports the following LTE bands and channel bandwidths: 1.4/3/5/10/15/20 MHz in Bands B2, B66; 1.4/3/5/10 MHz in Band B5; 5/10/15/20 MHz in Bands B7, B38, B41, B42;

This device supports the following 5G NR bands and channel bandwidths: 5/10/15/20 MHz in Band n5 and n26; 5/10/15/20/25/30/40 MHz in Band n7; 20/30/40/50/60/70/80/90/100 MHz in Bands n41, n77, n78;