FCC ID LDK102038

102038

by Cisco Systems Inc

Grantee Code: LDK   Product Code: 102038
Latest application date: 2000-03-20

FCC ID Device Details

FCC IDLDK102038
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeLDK
Product Code102038
Applicant BusinessCisco Systems Inc 🇺🇸
Related Domains cisco.com
Equipment Class102038
Test FirmM. Flom Associates, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: LOZ102038 Grant Date: 11/15/19992000-03-20

Exhibits

DocumentTypeAvailableFile
External PhotoExternal Photos2000-03-20PDF 115.9 KB
LabelID Label/Location Info2000-03-20PDF 60.6 KB
Label DrawingID Label/Location Info2000-03-20PDF 60.6 KB
InfoOperational Description2000-03-20PDF 44.5 KB
Letters of authorizationOperational Description2000-03-20PDF 24 KB

Application Information

Application IDvv0irXUFKMhc76L9oVOc3Q==
Final Action Date2000-03-20
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: LOZ102038 Grant Date: 11/15/1999
Applicant FRN0004968939
Model102038
Frequency Range2412-2462 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Responsible PartySamuel Kim, Manager, Engineering, samukim@cisco.com , 408-527-1446
Technical ContactDavid A Case, Cisco Systems, dcase@aironet.com , 330-664-7396
Test FirmMorton Flom, M. Flom Associates, Inc., info@mflom.com , 480-926-3100
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput is EIRP based on a 0 dBi integral antenna molded as part of this PCMCIA card. This device has two output settings: MPE limits apply to the high output setting (74 mW EIRP), and operations with respect to Section 2.1093 of our rules is limited to the lower power setting (12 mW EIRP) for satisfying SAR compliance: output levels are preset at the factory.

Applications

Application IDDatePurpose
vv0irXUFKMhc76L9oVOc3Q==2000-03-20Change in identification of presently authorized equipment. Original FCC ID: LOZ102038 Grant Date: 11/15/1999

Equipment Authorization

FrequencyOutputToleranceRules
2412-2462 MHz0.0740000ppm15C

Grants

TCB Grant - Application vv0irXUFKMhc76L9oVOc3Q==

This application does not exist.

EAS Grant - Application vv0irXUFKMhc76L9oVOc3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cisco Systems Inc
125 West Tasman Drive
San Jose, CA 95134-1706
United States
  Date of Grant: 03/20/2000

Application Dated: 01/21/2000
 
Attention: Samuel Kim , Manager, Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  LDK102038
Name of Grantee:  Cisco Systems Inc
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes:
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.074  

Output is EIRP based on a 0 dBi integral antenna molded as part of this PCMCIA card. This device has two output settings: MPE limits apply to the high output setting (74 mW EIRP), and operations with respect to Section 2.1093 of our rules is limited to the lower power setting (12 mW EIRP) for satisfying SAR compliance: output levels are preset at the factory.



Mail To:
David Case, Sr. Compliance Engineer
Cisco Systems
3875 Embassy Parkway
Akron, OH 44333