FCC ID MFMTT-2400
802.11b/g wLAN AP
by Teletronics International Inc
Grantee Code: MFM Product Code: TT2400
Latest application date: 2006-06-06
FCC ID Device Details
| FCC ID | MFMTT-2400 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | MFM |
| Product Code | TT2400 |
| Applicant Business | Teletronics International Inc 🇺🇸 |
| Related Domains |  teletronics.com |
| Equipment Class | 802.11b/g wLAN AP |
| Test Firm | Compliance Certification Services Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2006-06-06 |
| 2412-2462 MHz | Original Equipment | 2006-04-25 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2006-06-06 | PDF 32.4 KB |
| Users Manual | Users Manual | 2006-04-25 | PDF 28.3 KB |
| Internal Photos | Internal Photos | 2006-06-06 | PDF 2.4 MB |
| Internal Photos | Internal Photos | 2006-04-25 | PDF 2.4 MB |
| External Photos | External Photos | 2006-06-06 | PDF 948.8 KB |
| External Photos | External Photos | 2006-04-25 | PDF 1.2 MB |
| ID Label | ID Label/Location Info | 2006-06-06 | PDF 187.3 KB |
| ID Label | ID Label/Location Info | 2006-04-25 | PDF 169.3 KB |
| Test Setup Photos | Test Setup Photos | 2006-06-06 | PDF 399 KB |
| Test Setup Photos | Test Setup Photos | 2006-04-25 | PDF 329.9 KB |
| Test Report | Test Report | 2006-06-06 | PDF 2.2 MB |
| Test Report | Test Report | 2006-04-25 | PDF 1.5 MB |
| Authorization Letter | Cover Letter(s) | 2006-06-06 | PDF 57.4 KB |
| Request for Confidentiality | Cover Letter(s) | 2006-06-06 | PDF 32.1 KB |
| Authorization Letter | Cover Letter(s) | 2006-04-25 | PDF 54.8 KB |
| Request for Confidentiality | Cover Letter(s) | 2006-04-25 | PDF 19.9 KB |
| Antenna | Parts List/Tune Up Info | 2006-06-06 | PDF 65.9 KB |
| Antenna | Parts List/Tune Up Info | 2006-04-25 | PDF 54.5 KB |
| Block Diagram Module Metadata only | Block Diagram | PDF 43.3 KB | |
| Block Diagram System Metadata only | Block Diagram | PDF 9.3 KB | |
| Schematics Module Metadata only | Schematics | PDF 123.9 KB | |
| Schematics System Metadata only | Schematics | PDF 99.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 44 KB |
Application Information
| Application ID | WYFIsjDAybe3uj776cT13g== |
|---|---|
| Final Action Date | 2006-06-06 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0007415805 |
| Model | TT-2400 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g wLAN AP |
| Responsible Party | Dickson Fang, President, dickson@teletronics.com , 301-309-8500 |
| Test Firm | Harris Lai, Compliance Certification Services Inc., harris@ccsemc.com.tw  , 886-3-324-0332 |
| TCB Email | mike.kuo@ccsemc.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is Conducted. Professional installation is required, and may only be use in point-to-point applications. Only the antenna documented in this filing and installed in the manner specified may be used with this device. The antennas must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with operating instructions for satisfying RF exposure compliance requirements. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| WYFIsjDAybe3uj776cT13g== | 2006-06-06 | Original Equipment |
| IaiMf1Apq/LcB4hzrFvESQ== | 2006-04-25 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application WYFIsjDAybe3uj776cT13g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 06/06/2006 Application Dated: 06/06/2006 |
| Teletronics International Inc |
| 2 Choke Cherry Road |
| Suite 100 |
| Rockville, MD 20850 |
| Attention: Dickson Fang , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MFMTT-2400 |
| Name of Grantee: | Teletronics International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g wLAN AP |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.2228 |
| Power Output is Conducted. Professional installation is required, and may only be use in point-to-point applications. Only the antenna documented in this filing and installed in the manner specified may be used with this device. The antennas must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application WYFIsjDAybe3uj776cT13g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Teletronics International Inc 2 Choke Cherry Road Suite 100 Rockville, MD 20850 United States |
Date of Grant: 06/06/2006 Application Dated: 06/06/2006 |
| Attention: Dickson Fang , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MFMTT-2400 |
| Name of Grantee: | Teletronics International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g wLAN AP |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.2228 |
| Power Output is Conducted. Professional installation is required, and may only be use in point-to-point applications. Only the antenna documented in this filing and installed in the manner specified may be used with this device. The antennas must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 04/25/2006 Application Dated: 04/25/2006 |
| Teletronics International Inc |
| 2 Choke Cherry Road |
| Suite 100 |
| Rockville, MD 20850 |
| Attention: Dickson Fang , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MFMTT2400 |
| Name of Grantee: | Teletronics International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g WLAN AP |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.043 |
| Power Output is Conducted. Professional installation is required, and may only be use in point-to-point applications. Only the antenna documented in this filing and installed in the manner specified may be used with this device. The antennas must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
EAS Grant - Application IaiMf1Apq/LcB4hzrFvESQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Teletronics International Inc 2 Choke Cherry Road Suite 100 Rockville, MD 20850 United States |
Date of Grant: 04/25/2006 Application Dated: 04/25/2006 |
| Attention: Dickson Fang , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | MFMTT2400 |
| Name of Grantee: | Teletronics International Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g WLAN AP |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 36 | 15C | 2412.0 - 2462.0 | 0.043 |
| Power Output is Conducted. Professional installation is required, and may only be use in point-to-point applications. Only the antenna documented in this filing and installed in the manner specified may be used with this device. The antennas must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installer must be provided with operating instructions for satisfying RF exposure compliance requirements. |
| 36: | Certain antennas used with this equipment require a minimum cable length, or have output power limitations as documented in the application. |
| Mail To: |