X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc

ASUSTeK Computer Inc ASUS Phone (Mobile phone)

Page 1 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 2 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 3 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 4 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 5 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 6 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 7 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 8 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 9 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 10 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 11 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 12 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 13 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 14 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 15 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 16 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 17 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 18 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 19 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 20 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 21 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 22 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 23 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 24 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 25 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 26 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 27 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 28 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 29 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 30 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 31 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 32 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 33 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 34 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 35 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 36 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 37 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 38 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 39 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 40 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 41 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 42 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 43 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 44 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 45 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 46 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 47 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 48 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 49 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Page 50 of X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc

Calibration Laboratory of
Schmid & Partner
Engineering AG
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No .:
Schweizerischer Kalibrierdienst
SCS 0108
The Swiss Accreditation Service is o ne of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton (Auden)
Certificate No:
D1900V2-5d041_Sep17
CALIBRATION CERTIFICATE
Object
D1900V2 - SN:5d041
Calibration procedure(s)
QA CAL-05.v9
Calibration procedure for dipole validation kits above 700 MHz
Calibration date:
September 28, 2017
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S I).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity< 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date (Certificate No.)
Power meter NAP
SN: 104778
04-Apr-17 (No. 217-02521/02522)
Scheduled Calibration
Apr-18
Power sensor NRP-291
Power sensor NRP-291
SN: 103244
04-Apr-17 (No. 217-02521)
Apr-18
SN: 103245
04-Apr-17 (No. 217-02522)
Apr-18
Reference 20 dB Attenuator
SN: 5058 (20k)
Type-N mismatch combination
Reference Probe EX3DV4
SN: 5047.2 I 06327
SN: 7349
07-Apr-17 (No. 217-02528)
07-Apr-17 (No. 217-02529)
Apr-18
Apr-18
31 -May-17 (No. EX3-7349_May17)
May-18
DAE4
SN: 601
28-Mar-17 (No. DAE4-601 _Mar17)
Mar-18
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
Power sensor HP 8481A
SN: GB37480704
SN: US37292783
07-0ct-1 5 (in house check Oct-16)
Power sensor HP 8481A
RF generator R&S SMT-06
SN: MY41092317
07-0ct-15 (in house check Oct-16)
In house check: Oct-18
In house check: Oct-18
SN: 100972
15-Jun-15 (in house check Oct-16)
Network Analyzer HP 8753E
SN: US37390585
18-0ct-01 (in house check Oct-16)
Name
Function
Signature
Calibrated by:
Leif Klysner
Laboratory Technician
ff~-~
Approved by:
Katja Pokovic
Technical Manager
In house check: Oct-18
In house check: Oct-17
~4-Issued: September 28, 2017
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: D1900V2-5d041_Sep17
Page 1 of 8
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditation No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for the assessment of Specific Absorption Rate
(SAR) from hand-held and body-mounted devices used next to the ear (frequency range of
300 MHz to 6 GHz)", July 2016
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)", March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D1900V2-5d041_Sep17
Page 2 of 8
Measurement Conditions
DASY sys em con f'1qurat1on, as ar as not given on page 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
V52.10.0
Modular Flat Phantom
Distance Dipole Center - TSL
10mm
with Spacer
= 5 mm
Zoom Scan Resolution
dx, dy, dz
Frequency
1900 MHz± 1 MHz
Head TSL parameters
Th e foII ow1nq
· parameters an d calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
40.0
1.40 mho/m
(22.0 ± 0.2) °C
39.0±6%
1.38 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Head TSL
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
Condition
250 mW input power
10.1 W/kg
normalized to 1W
40.5 W/kg ± 17.0 % (k=2}
SAR for nominal Head TSL parameters
SAR averaged over 10 cm 3 (10 g) of Head TSL
SAR measured
condition
250 mW input power
5.27 W/kg
normalized to 1W
21.1 W/kg ± 16.5 % (k=2}
SAR for nominal Head TSL parameters
Body TSL parameters
The followina parameters and calculations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
53.3
1.52 mho/m
(22.0 ± 0.2) °C
54.3 ±6 %
1.47 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (1 O g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D1900V2-5d041_Sep17
Condition
250 mW input power
9.92 W/kg
normalized to 1W
40.7 W/kg ± 17.0 % (k=2)
condition
250 mW input power
5.27 W/kg
normalized to 1W
21.4 W/kg ± 16.5 % (k=2)
Page 3 of 8
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
52.9 Q + 6.0 jQ
Return Loss
-23.7 dB
Antenna Parameters with Body TSL
47.2 Q + 6.6 jQ
Impedance, transformed to feed point
Return Loss
- 22.7 dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.201 ns
After long term use with 1DOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
July 04, 2003
Certificate No: D19DOV2-5d041_Sep17
Page 4 of 8
DASY5 Validation Report for Head TSL
Date: 28.09.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5d041
Communication System: UID O - CW; Frequency: 1900 MHz
Medium parameters used: f = 1900 MHz; cr = 1.38 Sim; Er= 39; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(8.43, 8.43, 8.43); Calibrated: 31.05.2017;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 28.03.2017
•
Phantom: Flat Phantom 5.0 (front); Type: QD 000 P50 AA; Serial: 1001
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Head Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value= 109.6 V/m; Power Drift= -0.07 dB
Peak SAR (extrapolated)= 19.3 W/kg
SAR(l g) = 10.1 W/kg; SAR(lO g) = 5.27 W/kg
Maximum value of SAR (measured)= 15.6 W/kg
dB
-3.00
-6.00
-9.00
-12.00
-15.00
0 dB= 15.6 W/kg = 11.93 dBW/kg
Certificate No: D1900V2-5d041_Sep17
Page 5 of 8
Impedance Measurement Plot for Head TSL
28 Sep 2017
[fill S11
1 U FS
1: 52. 947 !l
6.0117 !l
503.58 pH
09:47; 27
1 900. 000 000 MHz
Del
Cor
l.
Av9
15
Hid
CH2
S11
LO_G
5 d B/ REF - 20 dB
1:-23. 745 dB
1 900. 000 00 0 MHz
Cor
Av9
15
Hid
STOP 2 100. 000 000 MHz
START 1 700, 000 000 MHz
Certificate No: D1900V2-5d041 _Sep17
Page 6 of 8
DASY5 Validation Report for Body TSL
Date: 28.09.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 1900 MHz; Type: D1900V2; Serial: D1900V2 - SN: 5d041
Communication System: UID O - CW; Frequency: 1900 MHz
Medium parameters used: f = 1900 MHz; a= 1.47 Sim; er = 54.3; p = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(8.2, 8.2, 8.2); Calibrated: 31.05.2017;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 28.03.2017
•
Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Body Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 103.7 V/m; Power Drift= -0.07 dB
Peak SAR (extrapolated) = 17.6 W/kg
SAR(l g) =9.92 W/kg; SAR(lO g) =5.27 W/kg
Maximum value of SAR (measured)= 14.4 W/kg
dB
-3.00
-6.00
-9.00
-12.00
-15.00
0 dB= 14.4 W/kg = 11.58 dBW/kg
Certificate No: D1900V2-5d041_Sep17
Page 7 of 8
Impedance Measurement Plot for Body TSL
28 Sep 2017
[BJ]
sa
1 U FS
1 : 47. 234
6.6230
o 554. 7 8 pH
09: 46: 45
1 900.000 000 MHz
Del
'\
Cor
Av 9
16
Hld
CH2
S11
LOG
5 dB/ REF -20 dB
..
-,..-
1:-22.661 dB
....
•
•
•
1 900.000 000 t1Hz
...
..
•
Cor
Av9
16
..
_,,
___
Hld
START 1 7 00.000 000 MHz
Certificate No: D1900V2-5d041_Sep17
STOP 2 100.000 000 MHz
Page 8 of 8
~
®
'r,-'IT
..i~
!.------~'~~'/,~, ~
.......-...... 11~1iiA
p e a g ~~~
Tloollll'\RJ
cAUBRATION LABORATORY
Add: No.S I Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86- 10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl .cn
lac-• CNAS
~?t
~~~.:'/,,1,,~,,~,~'
Certificate No:
Sporton
Client
rh m.: 1 ..r
,,,11 1111,,
In Collaboration with
......_....,.
CALIBRATION
CNAS L0570
217-97148
CALIBRATION CERTIFICATE
Object
D2450V2 - SN : 736
Calibration Procedure(s)
FF-211-003-01
Calibration Procedures for dipole validation kits
Calibration date:
September 18, 2017
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)°C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
Power Meter NRVD
102196
02-Mar-17 (CTIL, No.J17X01254)
Mar-18
Power sensor
100596
02-Mar-17 (CTIL, No.J17X01254)
Mar-18
Reference Probe EX3DV4
SN 7433
26-Sep-16(SPEAG,No.EX3-7433_Sep16)
Sep-17
DAE4
SN 1331
19-Jan-17(CTIL-SPEAG,No.Z17-97015)
Jan-18
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
13-Jan-17 (CTTL, No.J17X00286)
Jan-18
Network Analyzer E5071 C
MY46110673
13-Jan-17 (CTTL, No.J17X00285)
Jan-18
NRV-Z5
Name
Calibrated by:
Reviewed by:
Approved by:
Scheduled Calibration
Function
Zhao Jing
SAR Test Engineer
Yu Zongying
SAR Test Engineer
Signature
i .t ~-t
~_;,
Qi Dianyuan
SAR Project Leader
_,
Issued: September 21, 201i· ' ·
Page I of 8
~~ . --
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: 217-97 148
...
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633 -2504
E-mail: cttl@chinattl.com
http://www.ch inattl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used next to the ear (Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom . The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required .
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
•
SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Zl7-97148
Page 2 of 8
In Collaboration with
s p
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100 191 , China
Tel: +86- I0-62304633-2079
Fax: + 86- I 0-62304633-2504
E-mai l: cttl@chinattl. com
http://www.chinattl.cn
Measurement Conditions
DASY svstem con f1Quraf,on, as f ar as not given on page 1
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1C
Distance Dipole Center - TSL
52.10.0.1446
10 mm
with Spacer
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
2450 MHz ± 1 MHz
Head TSL parameters
Th e f o II owinq
. oarameters and calculations were appr1ed.
Temperature
Nominal Head TSL parameters
22.0
Measured Head TSL parameters
SAR result with Head TSL
SAR averaged over 1 cm (1
< 1.0
39.2
---Condition
SAR for nominal Head TSL parameters
1. 79 mho/m ± 6 %
----
13.1 mW I g
250 mW input power
cm
Conductivity
1.80 mho/m
38.7 ±6 %
°c
g) of Head TSL
SAR measured
SAR averaged over 10
°c
(22.0 ± 0.2)
Head TSL temperature change during test
Permittivity
52.4 mW l g± 18.8 % (k=2)
normalized to 1W
Condition
(10 g) of Head TSL
SAR measured
6.08 mW I g
250 mW input power
SAR for nominal Head TSL parameters
24.3 mW lg± 18.7 % (k=2)
normalized to 1W
Body TSL parameters
Th e f o II ow1nq
. oarameters an d ca Icu Iat1ons
were app11e
r d.
Temperature
Nominal Body TSL parameters
22.0
Measured Body TSL parameters
SAR resu It WI"th BO dIY TSL
SAR averaged over 1 cm (1
<1.o
g) of Body TSL
SAR measured
----
cm 3 (1 O g) of Body TSL
----
12.8mW /g
50.8 mW lg± 18.8 % (k=2)
Condition
normalized to 1W
Page 3 of 8
1.98 mho/m ±6 %
Condition
250 mW input power
SAR for nominal Body TSL parameters
Conductivity
1.95 mho/m
52.5 ±6 %
normalized to 1W
SAR measured
Certificate No: 2 17-97 148
52.7
250 mW input power
SAR for nominal Body TSL parameters
SAR averaged over 1O
°c
(22 .0 ± 0.2)
Body TSL temperature change during test
Permittivity
5.94 mW I g
23.6 mW lg± 18.7 % (k=2)
In Collaboration with
a g
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100 191, China
Tel: +86-10-62304633 -2079
Fax: +86-10-62304633-2504
E-mai l: cttl@chinattl. com
http://www.chinattl.cn
Appendix (Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
52.70+ 4.59j0
Return Loss
- 25.7dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point
49.20+ 4.46j0
Return Loss
- 26 .8dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.269 ns
After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph . The SAR data are not
affected by this change. The overall dipole length is still according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
Manufactured by
Certificate No: Z l7-97 148
SPEAG
Page 4 of&
.....-......
® In Collaboration with
------......
- TTL s p e a g
CALIBRATION LABORATORY
Add: N o.51 Xueyuan Road, Haidian District, Beijing, I00191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http ://www.chinattl.cn
DASYS Validation Report for Head TSL
Date: 09.18.2017
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 736
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2450 MHz; cr = 1.788 S/m; er= 38.67; p = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN7433; ConvF(7.45, 7.45, 7.45); Calibrated: 9/26/2016;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1331 ; Calibrated: 1/19/2017
Phantom: Triple Flat Phantom 5.IC; Type: QD 000 P51 CA; Serial: 1161 / 1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 102.3 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 27.8 W/kg
SAR(l g) = 13.1 W /kg; SAR(lO g) = 6.08 W/kg
Maximum value of SAR (measured) = 22.1 W/kg
dB
-4.54
-9.08
-13.61
-18.15
-22.69
L.
0 dB= 22.1 W/kg = 13.44 dBW/kg
Certificate No: Zl 7-97148
Page 5 of8
In CoUaboration with
a g
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
http://www.chinattl.cn
E-mail: cttl@chinattl. com
Impedance Measurement Plot for Head TSL
Trl Sll Log Mag 10. 00dB/ Ref O.OOOdB [Fl]
50.00
! >1 2.4500000 GHZ -25 . 742 dB
40 . 00
30 . 00
20 . 00
10 . 00
0.000
-10 . 00
~0. 00
40. 00
50. uO
~ - Sll smith (R+j X) Scale 1.000U [Fl De1]
>l
2.4500000 GHZ
52. 657 0
4. 5920 0
298_:J..0-1'fl -
-._- ~
//
1 Start 2.25 Ga _ _ _ _ _ _ _ _ _ _ _ __
Certificate No: Z17-97148
·~
"\
IFBW 100Hz
Page6of8
Stop 2.65 GHz
111 1
.......-....... ®
- TTL
------..
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-1 0-62304633-2079
Fax: +86-10-62304633-2504
http ://www. chi nattl. en
E-mail: cttl@chinattl. com
DASY5 Validation Report for Body TSL
Date: 09.18.2017
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 - SN: 736
Communication System: UID 0, CW; Frequency: 2450 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2450 MHz; a= 1.983 S/m; Er= 52.51; p = 1000 kg/m3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63. l 9-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN7433; ConvF(7.46, 7.46, 7.46); Calibrated: 9/26/2016;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1331; Calibrated: 1/19/2017
Phantom: Triple Flat Phantom 5.1 C; Type: QD 000 P51 CA; Serial: 11 6 1/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.1 0
(74 17)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 99.56 V/m; Power Drift = -0.00 dB
Peak SAR (extrapolated) = 27.1 W/kg
SAR(l g) = 12.8 W/kg; SAR(lO g) = 5.94 W/kg
Maximum value of SAR (measured) = 21.7 W/kg
dB
-4.42
-8.84
-13.25
-17 .67
-22.09
0 dB = 21.7 W/kg = 13.36 dBW/kg
Certificate No: Z 17-97148
Page 7 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.5 1 Xueyuan Road, Haidian Di strict, Beijing, 10019 1, China
Fax: +86- 10-62304633 -2504
Tel: +86-1 0-62304633-2079
E-mail: cttl@chinattl.com
http://www. ch inattl.en
Impedance Measurement Plot for Body TSL
- ---------
Trl 511 Log Mag 10 . 00dB/ Ref O. OOOdB [Fl]~0 - 00
>l
2.4500000 GHZ -26 . 81 9 dB
40 . 00
30 . 0 0
20. 00
10. 00
0.000
-4 0. 00
, o.oo
~ - sll smith (R+j X) seal e 1. ooou [Fl oel]
>1
2.4500000 GHZ
49 . 225 0
4.4634 0
289 . ~.5-plf"~
- -- - --,,--.- - - - - - - - -- -- - - - - -
Certificate No: 217-97148
\ f--;
1 Start 2.25 GHz
'\
,//
IFBW 100 Hz
Page 8 of8
Stop 2.65 GHz
Ill !
~
®
.L.J
T r"'TTT
_L
,,~'\"I"/'~,,
ln Colleboration with
~_p_..__
,'"- ~ ;,,,
g .:,,.~~
~ -.........
Tl.llll'\"J
lllili~
~~f ~ CALIBRATION
"~,1,,Q.,,~,~
Certificate No:
Sporton
rhl!:l.!lji1'
lac--CNAs~~
CAUBRATIONLABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86- 10-62304633 -2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http ://www.chinattl.cn
Client
CNAS L0570
217-97149
CALIBRATION CERTIFICATE
Object
D2600V2 - SN: 1008
Calibration Procedure(s)
FF-Z11 -003-01
Calibration Procedures for dipole validation kits
Calibration date:
September 18, 2017
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate .
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)'C and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
Power Meter NRVD
102196
02-Mar-17 (CTTL, No.J17X01254)
Mar-18
Power sensor
100596
02-Mar-17 (CTIL, No.J17X01254)
Mar-18
Reference Probe EX3DV4
SN 7433
26-Sep-16(SPEAG,No.EX3-7433_Sep16)
Sep-17
DAE4
SN 1331
19-Jan-17(CTIL-SPEAG,No.Z17-97015)
Jan-18
Secondary Standards
ID#
Cal Date(Calibrated by, Certificate No.)
Signal Generator E4438C
MY49071430
13-Jan-17 (CTTL, No.J17X00286)
Jan-18
Network Analyzer E5071 C
MY46110673
13-Jan-17 (CTTL, No.J17X00285)
Jan-18
NRV-Z5
Name
Calibrated by:
Zhao Jing
Function
SAR Test Engineer
Scheduled Calibration
Signature
.Ju.~~
Reviewed by:
Yu Zongying
SAR Test Engineer
·-~--~
Approved by:
Qi Dianyuan
SAR Project Leader
· .... _
Issued: September 20, 2017
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: Z l ?-97 149
Page I of 8
In Collaboration with
p e a g
CALIBRATION LABORATORY
Add: No.S I Xueyuan Road, Haidian District, Beijing, 100 191 , China
Tel: +86 -1 0-62304633-20 79
Fax: +86- 10-62304633-2 504
E-mail: cttl@chinatll.com
http://www.chinaltl.cn
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORMx,y,z
not applicable or not measured
Calibration is Performed Accord ing to the Following Standards :
a) IEEE Std 1528-2013, "I EEE Recommended Practice for Determining the Peak
Spatial-Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1 , "Measurem ent procedure for assessment of specific absorption rate of human
exposure to radio frequency fields from hand-held and body-mounted wireless
communication devices- Part 1: Device used next to the ear (Frequency range of 300MHz to
6GHz)", July 2016
c) IEC 62209-2, "Procedure to measure the Specific Absorption Rate (SAR) For wireless
communication devices used in close proximity to the human body (frequency range of
30MHz to 6GHz)", March 2010
d) KDB865664, SAR Measurement Requirements for 100 MHz to 6 GHz
Additiona l Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions : Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required .
• SAR measured: SAR measured at the stated antenna input power.
•
SAR normalize d: SAR as measured , normalized to an input power of 1 Wat the antenna
connector.
•
SAR for nominal TSL paramete rs: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of
Measurement multiplied by the coverage factor k=2, which for a normal distribution
Corresponds to a coverage probability of approximately 95%.
Certificate No: Z 17-97 149
Page 2 of 8
In Collaboration with
s p
a g
CALIBRATION LABORATORY
Add: No.5 1 Xueyuan Road, Haidian District, Beijing, 100191 , China
Tel: +86-10-62304633-2079
Fax: +86- 10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Measurement Conditions
DASY syst em con f1qurat'10n, as f ar as not q1ven
on paqe
DASY Version
DASY52
Extrapolation
Advanced Extrapolation
Phantom
Triple Flat Phantom 5.1 C
Distance Dipole Center - TSL
52 .10.0.1446
10 mm
with Spacer
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
2600 MHz ± 1 MHz
Head TSL parameters
Th e f o II owing
. parameters an d ca Icu Ia rions were aoo r1e d .
Temperature
Nominal Head TSL parameters
22.0 °C
Measured Head TSL parameters
39.0
39.8 ±6 %
<1.0 °C
----
----
250 mW input power
SAR for nominal Head TSL parameters
cm
SAR averaged over 10
1.95 mho/m ± 6 %
Condition
g) of Head TSL
SAR measured
Conductivity
1.96 mho/m
(22.0 ± 0.2) °C
Head TSL temperature change during test
SAR result with Head TSL
SAR averaged over 1 cm (1
Permittivity
normalized to 1W
14.1 mW I g
56.8 mW lg± 18.8 % (k=2)
Condition
(10 g) of Head TSL
SAR measured
250 mW input power
SAR for nominal Head TSL parameters
normalized to 1W
6.32 mW/ g
25.4 mW lg
± 18.7 % (k=2)
Body TSL parameters
The following parameters and calculations were applied.
Temperature
Nominal Body TSL parameters
22.0 °C
Measured Body TSL parameters
<1 .0 °C
----
SAR for nominal Body TSL parameters
normalized to 1W
250 mW input power
SAR for nominal Body TSL parameters
Certificate No: Z 17-97149
----
13.7mW/g
55.0 mW lg ± 18.8 % (k=2)
Condition
(10 g) of Body TSL
SAR measured
2.15 mho/m ±6 %
Condition
g) of Body TSL
250 mW input power
cm 3
Conductivity
2.16 mho/m
52.7 ± 6 %
SAR measured
SAR averaged over 10
52.5
(22.0 ± 0.2) °C
Body TSL temperature change during test
SAR resu It WI"th B0 dIY TSL
SAR averaged over 1 cm 3 (1
Permittivity
normalized to 1W
Page 3 of8
6 .10 mW I g
24.5 mW /g ± 18.7 % (k=2)
~·-····,/~
iiiTTL
In Collaboration with
p e
a g
CALIBRATION LABORATORY
Add: No.SI Xueyuan Road, Haidian District, Beijing, 100 191 , China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl. cn
Appendix(Additional assessments outside the scope of CNAS L0570)
Antenna Parameters with Head TSL
Impedance, transformed to feed point
48.50- 3.12j0
Return Loss
- 29.1dB
Antenna Parameters with Body TSL
Impedance, transformed to feed point
46.40- 2.58j0
Return Loss
- 26 .?dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.256 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can
be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly
connected to the second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some
of the dipoles, small end caps are added to the dipole arms in order to improve matching when loaded
according to the position as explained in the "Measurement Conditions" paragraph . The SAR data are not
affected by this change. The overall dipole length is still according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered
connections near the feedpoint may be damaged.
Additional EUT Data
I Manufactured by
Certificate No: 2 17-971 49
SPEAG
Page 4 of8
~ ~
------.....
In CoReboration with
• TTL s p e a g
CALIBRATION LABORATORY
Add: No.5 1 Xueyuan Road, 1-laidian District, Beijing, 100191 , China
Tel: +86- 10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
DASYS Validation Report for Head TSL
Date: 09.18.2017
Test Laboratory: CTTL, Beijing, China
OUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 - SN: 1008
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1: 1
Medium parameters used: f = 2600 MHz; cr = 1.947 S/m; er = 39.75; p = 1000 kg/m3
Phantom section: Left Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63 .l 9-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN7433; ConvF(7.19 , 7.19, 7.19); Calibrated: 9/26/2016;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Snl331; Calibrated: 1/19/2017
Phantom: Triple Flat Phantom 5.IC; Type: QD 000 PSI CA; Serial: 1161/1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(7417)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 102.7 V/m; Power Drift = 0.01 dB
Peak SAR (extrapolated) = 30.2 W/kg
SAR(l g) = 14.1 W/kg; SAR(lO g) = 6.32 W/kg
Maximum value of SAR (measured )= 23.7 W/kg
dB
-4.71
-9.42
-14.12
-18.83
-23.54
L.
0 dB= 23.7 W/kg = 13.75 dBW/kg
Certificate No: Z 17-97 149
Page 5 of8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.5 1 Xueyuan Road, Haidian Di strict, Beijing, 10019 1, China
Tel: +86-10-62304633-2079
Fax: +86-10-62304633-2504
E-mail: cttl@chinattl.com
http://www.chinattl.cn
Impedance Measurement Plot for Head TSL
Tr1 S11 Log Mag f"O.OOdB/ Ref 0.000dB [F1 ]
o. OO >1 2.6000000 GHZ -29.097 dB
4 0 . 00
--------
, o.oo
20 . 00
10. 00
0.000
-10.00
- 20 .00
- 30. 00
-4 0 . 00
- 50 . 00 '--~~~~~~~~~~~~~~~~~--,.--~........~~~~~--~~~~~~~~~~
s11 sm1th (R+jx ) scale 1.ooou [F1 Del]
~1111
>1
2 . 6000000 GHZ
48 . 513 n -3 . 1222 o
~ .
f1 · Start 2.4 GHz
Certificate No: Z17-97149
IFBW 100 Hz
Page 6 of8
Stop 2.8 GHz •
•,
~
-----.
- TTL
In Colleboration with
p e a g
CALIBRATION LABORATORY
Add : No.5 1 Xuey uan Road, Haidian District, Beijing, 100191 , China
Tel : + 86- 10-62304633-2 079
Fax: + 86-10-6230463 3-2504
E-mail: cttl@chinaltl.c om
http://www.chinaltl.cn
DASYS Validation Report for Body TSL
Date: 09.18.2017
Test Laboratory: CTTL, Beijing, China
DUT: Dipole 2600 MHz; Type: D2600V2; Serial: D2600V2 - SN: 1008
Communication System: UID 0, CW; Frequency: 2600 MHz; Duty Cycle: 1:1
Medium parameters used: f = 2600 MHz; cr = 2.147 S/m; er = 52.74; p = 1000 kg/m3
Phantom section: Center Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63. l 9-2007)
DASY5 Configuration:
•
•
•
•
•
Probe: EX3DV4 - SN7433; ConvF(7.22 , 7.22, 7.22); Calibrated: 9/26/2016;
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
Electronics: DAE4 Sn1331; Calibrated: 1/19/2017
Phantom: Triple Flat Phantom 5.lC; Type: QD 000 P51 CA; Serial: 1161 / 1
Measurement SW: DASY52, Version 52.10 (O); SEMCAD X Version 14.6.10
(74 17)
Dipole Calibration/Zoom Scan (7x7x7) (7x7x7)/Cube 0: Measurement grid: dx=5mrn,
dy=5mrn, dz=5mm
Reference Value = 98.13 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 30.1 W/kg
SAR(J g) = 13.7 W/kg; SAR(lO g) = 6.1 W/kg
Maximum value of SAR (measured )= 23.6 W/kg
dB
-4.74
-9.49
-14.23
-18.98
-23.72
0 dB= 23.6 W/kg = 13.73 dBW/kg
Certificate No: Z 17-97 149
Page 7 of 8
In Collaboration with
a g
CALIBRATION LABORATORY
Add: No.SJ Xueyuan Road, I-laidian District, Beij ing. 100191 , China
Fax: +86- 10-62304633-2504
Tel: +86-1 0-62304633-2079
E-mail: cttl@chinattl.com
http ://www. ch inattl. en
Impedance Measurement Plot for Body TSL
Tr1 511 Log Mag 10 . 00dB/ Ref O. OOOde· [ F1]
so.oo
I>1
2.6000000 GHz -26.737 de
.JO. 00
;o . 00
20 . 00
10.00
0. 000
10. 00
- 20.00
-30 . OU
- 40 . 00
-'i0. 00
511 sm1th (R+j x) scale 1.ooou [F1 Del ]
•11111
>1
2. 6000000 GHz
46. 385 o -2. 5769 o
23 . 75,.5--pF'"_.-
--------~
//
~\
(-----t--- ;
1 Start 2.4 GHz
Certificate No: Z l 7-97 149
~-----~
IFBW 100 Hz
Page 8 of8
//
---------~~-
Stop 2.8 GHz
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
Swiss Calibration Service
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton (Auden)
Certificate No:
05GHzV2-1006_Sep17
!CALIBRATION CERTIFICATE
Object
D5GHzV2 - SN:1006
Calibration procedure(s)
QA CAL-22.v2
Calibration procedure for dipole validation kits between 3-6 GHz
Calibration date:
September 26, 2017
This calibration certificate documents the traceability to national standards. which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date (Certificate No.)
Scheduled Calibration
Power m eter NAP
04-Apr-17 (No. 217-02521/02522)
Apr-18
Power sensor NRP-Z91
SN: 104778
SN: 103244
04-Apr-17 (No. 217-02521)
Apr-18
Power sensor NRP-Z91
SN: 103245
Reference 20 dB Attenuator
Type-N m ismatch combination
SN: 5058 (20k)
04-Apr-17 (No. 217-02522)
07-Apr-17 (No. 217-02528)
Apr-1 8
Apr-18
SN: 5047.2 / 06327
07-Apr-17 (No. 217-02529)
Reference Probe EX3DV4
SN: 3503
31-Dec-16 (No. EX3-3503_Dec16)
Apr- 18
Dec-17
DAE4
SN: 601
28-Mar-17 (No. DAE4-601 _Mar17)
Mar-18
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-16 (No. 217-02222)
In house check: Oct-18
Power sensor HP 8481A
SN: US37292783
SN: MY41092317
07-0ct-16 (No. 217-02222)
In house check: Oct-1 8
07-0ct-16 (No. 217-02223)
In house check: Oct-18
RF generator R&S SMT-06
Network Analyzer HP 8753E
SN: 100972
15-Jun-15 (in house check Oct-16)
In house check: Oct-18
SN: US37390585
18-0ct-01 (in house check Oct-1 6)
In house check: Oct-17
Name
Function
Calibrated by:
Jeton Kastrati
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Power sensor HP 8481A
Issued: September 26, 2017
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: D5GHzV2-1006_Sep17
Page 1 of 13
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Service suisse d'etalonnage
Servizio svizzero di taratura
Accreditation No.:
Accredited by the Swiss Accreditation Service (SAS)
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Measurement procedure for the assessment of Specific Absorption Rate
(SAR) from hand-held and body-mounted devices used next to the ear (frequency range of
300 MHz to 6 GHz)", July 2016
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)", March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D5GHzV2-1006_Sep17
Page 2 of 13
Measurement Conditions
DASY system conf1qurat1on, as ar as not 1ven on paqe 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
Modular Flat Phantom V5.0
Distance Dipole Center - TSL
Zoom Scan Resolution
V52.10.0
10 mm
with Spacer
dx, dy=4.0 mm, dz= 1.4 mm
Graded Ratio = 1.4 (Z direction)
Frequency
5250 MHz ± 1 MHz
5600 MHz± 1 MHz
5750 MHz± 1 MHz
Head TSL parameters at 5250 MHz
Tehof low,nq
l ' parameters and
ca l
culat1ons
were appI'd
1e
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 "C
35.9
4.71 mho/m
(22.0 ± 0.2) "C
36.7±6%
4.59 mho/m ± 6 %
< 0.5 "C
----
----
SAR result with Head TSL at 5250 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
Condition
100 mW input power
7.80 W/kg
normalized to 1W
78.3 W/kg ± 19.9 % (k=2)
SAR for nominal Head TSL parameters
SAR averaged over 10 cm3 (10 g) of Head TSL
SAR measured
condition
100 mW input power
2.24 W/kg
normalized to 1W
22.5 W/kg ± 19.5 % (k=2)
SAR for nominal Head TSL parameters
Head TSL parameters at 5600 MHz
Teh
alfowinq
l ' parameters and
ca l
culat1ons
were appI'd
1e
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 "C
35.5
5.07 mho/m
(22.0 ± 0.2) "C
36.2±6%
4.95 mho/m ± 6 %
< 0.5 "C
----
----
SAR result with Head TSL at 5600 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 10 cm 3 (10 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1006_Sep17
Condition
100 mW input power
8.48 W/kg
normalized to 1W
85.0 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.42 W/kg
normalized to 1W
24.3 W/kg ± 19.5 % (k=2)
Page 3 of 13
Head TSL parameters at 5750 MHz
The followinq parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 "C
35.4
5.22 mho/m
(22.0 ± 0.2) "C
36.0±6 %
5.12 mho/m ± 6 %
< 0.5 "C
----
----
SAR result with Head TSL at 5750 MHz
SAR averaged over 1 cm' (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 1O cm' (10 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2·1006_Sep17
Condition
100 mW input power
7.83 W/kg
normalized to 1W
78.5 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.22 W/kg
normalized to 1W
22.3 W/kg ± 19.5 % (k=2)
Page 4 of 13
Body TSL parameters at 5250 MHz
Th e f oII owing
. parameters an d ca Icu Iat,ons
were app 1·1e d
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.9
5.36 mho/m
(22.0 ± 0.2) °C
47.0±6%
5.49 mho/m ± 6 %
< 0.5 °c
----
----
SAR result with Body TSL at 5250 MHz
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
Condition
100 mW input power
7.76 W/kg
normalized to 1W
77.0 W/kg ± 19.9 % (k=2)
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (1 O g) of Body TSL
SAR measured
condition
100 mW input power
2.15 W/kg
normalized to 1W
21.3 W/kg ± 19.5 % (k=2)
SAR for nominal Body TSL parameters
Body TSL parameters at 5600 MHz
The followina parameters and calculations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.5
5.77 mho/m
(22.0 ± 0.2) °C
46.4± 6 %
5.96 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL at 5600 MHz
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1o cm 3 (1 O g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1006_Sep17
Condition
100 mW input power
8.07W/kg
normalized to 1W
80.1 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.26 W/kg
normalized to 1W
22.4 W/kg ± 19.5 % (k=2)
Page 5 of 13
Body TSL parameters at 5750 MHz
The following oarameters and calculations were aoolied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.3
5.94 mho/m
46.1 ±6 %
6.17 mho/m ± 6 %
----
----
(22.0 ± 0.2)
< 0.5 °C
SAR result with Body TSL at 5750 MHz
SAR averaged over 1 cm' (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm' (1 O g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1006_Sep17
Condition
100 mW input power
7.57 W/kg
normalized to 1W
75.1 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.10 W/kg
normalized to 1W
20.8 W/kg ± 19.5 % (k=2)
Page 6 of 13
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL at 5250 MHz
Impedance, transformed to feed point
53.8 Q - 8.4 jQ
-21.0 dB
Return Loss
Antenna Parameters with Head TSL at 5600 MHz
55.8 Q - 6.9 jQ
Impedance, transformed to feed point
-21.4 dB
Return Loss
Antenna Parameters with Head TSL at 5750 MHz
60.0 Q + 3.9 jQ
Impedance, transformed to feed point
Return Loss
- 20.2 dB
Antenna Parameters with Body TSL at 5250 MHz
54.1 Q -5.2 jQ
Impedance, transformed to feed point
Return Loss
-24.0 dB
Antenna Parameters with Body TSL at 5600 MHz
Impedance, transformed to feed point
58.5 Q • 4.8 jQ
- 20.9 dB
Return Loss
Antenna Parameters with Body TSL at 5750 MHz
59.8 Q + 5.6 jQ
Impedance, transformed to feed point
-19.7 dB
Return Loss
General Antenna Parameters and Design
Electrical Delay (one direction)
1.201 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
August28,2003
Certificate No: D5GHzV2-1006_Sep17
Page 7 of 13
DASY5 Validation Report for Head TSL
Date: 25.09.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1006
Communication System: UID O - CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz
Medium parameters used: f = 5250 MHz; cr = 4.59 Sim; Sr= 36.7; p = 1000 kg/m 3 ,
Medium parameters used: f = 5600 MHz; cr = 4.95 Sim; s, = 36.2; p = 1000 kglm 3 ,
Medium parameters used: f = 5750 MHz; cr = 5.12 Sim; Sr= 36; p = 1000 kglm 3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IECIANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4- SN3503; ConvF(5.58, 5.58, 5.58); Calibrated: 31.12.2016, ConvF(5.09, 5.09,
5.09); Calibrated: 31.12.2016, ConvF(5.02, 5.02, 5.02); Calibrated: 31.12.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 28.03.2017
•
Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5250 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 67.79 Vim; Power Drift= -0.04 dB
Peak SAR (extrapolated)= 28.2 Wlkg
SAR(l g) = 7.8 W/kg; SAR(lO g) = 2.24 W/kg
Maximum value of SAR (measured)= 18.0 Wlkg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 69.36 Vim; Power Drift= -0.06 dB
Peak SAR (extrapolated)= 32.8 Wlkg
SAR(l g) = 8.48 W/kg; SAR(lO g) = 2.42 W/kg
Maximum value of SAR (measured) = 20.0 Wlkg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5750 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 66.53 VIm; Power Drift= -0.05 dB
Peak SAR (extrapolated)= 31.0 Wlkg
SAR(l g) = 7.83 W/kg; SAR(lO g) = 2.22 W/kg
Maximum value of SAR (measured)= 18.7 Wlkg
Certificate No: D5GHzV2-1006_Sep17
Page 8 of 13
dB
-6.00
-12.00
-18.00
-24.00
-30.00
0 dB= 18.0 W/kg = 12.55 dBW/kg
Certificate No: D5GHzV2-1006_Sep17
Page 9 of 13
Impedance Measurement Plot for Head TSL
jgill S 11
1: 53.818 ll
1 U FS
-8.3984
i'1
25 Sep 2017 15:53:07
3.6096 p F
5 2 5 0. 000 000 MHz
CH1 Marke r s
Del
2: 55. 771 (,
-6. 8887 ,,
5. 60000 GHz
Co r
3: 60. 000 ,,
3 . 9316 i,
5 . 75000 GHz
ftv9
16
Hld
CH2
S11
LOG
5 dB / REF -20 dB
•
...
Co r
1:- 21. 050 dB
5 2 50. 000 000 MHz
CH2 Markers
•
2:-21.433 dB
5.60000 GHz
3:-20. 207 dB
5.75000 GHz
Av 9
16
Hld
STOP
START 5 000. 000 000 MHz
Certificate No: D5GHzV2-1006_Sep17
Page 10 of 13
E,
000. 000 000 MHz
DASY5 Validation Report for Body TSL
Date: 26.09.2017
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN:1006
Communication System: UID O - CW; Frequency: 5250 MHz, Frequency: 5600 MHz, Frequency: 5750 MHz
Medium parameters used: f = 5250 MHz; CT= 5.49 S/m; s, = 47; p = 1000 kg/m 3 ,
Medium parameters used: f = 5600 MHz; CT= 5.96 S/m; s, = 46.4; p = I 000 kg/m3 ,
Medium parameters used: f = 5750 MHz; CT= 6.17 S/m; s, = 46.l; p = 1000 kg/m 3
Phantom section: Flat Section
Measurement Standard: DASY5 (lEEE/IEC/ANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4- SN3503; ConvF(5.14, 5.14, 5.14); Calibrated: 31.12.2016, ConvF(4.57, 4.57,
4.57); Calibrated: 31.12.2016, ConvF(4.51, 4.51, 4.51 ); Calibrated: 31.12.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 28.03.2017
•
Phantom: Flat Phantom 5.0 (back); Type: QD 000 P50 AA; Serial: 1002
•
DASY52 52.10.0(1446); SEMCAD X 14.6.10(7417)
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5250 MHz/Zoom Scan,
dist=l.4mm (Sx8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 64.96 V/m; Power Drift= -0.08 dB
Peak SAR (extrapolated)= 30.6 W/kg
SAR(l g) = 7.76 W/kg; SAR(lO g) = 2.15 W/kg
Maximum value of SAR (measured)= 18.7 W/kg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 64.94 V/m; Power Drift= -0.08 dB
Peak SAR (extrapolated)= 34.0 W/kg
SAR(l g) =8.07 W/kg; SAR(to g) =2.26 W/kg
Maximum value of SAR (measured)= 19.9 W/kg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5750 MHz/Zoom Scan,
dist=l.4mm (Sx8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 61.76 V/m; Power Drift= -0.08 dB
Peak SAR (extrapolated)= 33.5 W/kg
SAR(l g) =7.57 W/kg; SAR(lO g) =2.1 W/kg
Maximum value of SAR (measured)= 18.9 W/kg
Certificate No: D5GHzV2-1006_Sep17
Page 11 of 13
dB
-6.00
-12.00
-18.00
-24.00
-30.00
0 dB= 18.7 W/kg = 12.72 dBW/kg
Certificate No: D5GHzV2-1006_Sep17
Page 12 of 13
Impedance Measurement Plot for Body TSL
26 Sep 2017
[filJ S11
FS
1 : 54. 102 n
- 5.1 6 6 0 n
5. 8682 pF
15:56: 27
5 250. 000 0 00 11H z
'+
CH1 Mark e r s
D~· l
2: 58.5 27
- 4. 8~: 4 0 r.
5. 60 0 0 0 GHz
Co r
:::: 5 9.8 4 8 n
5.5 8 40 n
5. 75 0 00 GHz
:I
f'h 1:3
16
Hl d
CH2
S11
LOG
5 dB/ REF - 20 dB
1:-23. 972 dB
5 250.000 000 MHz
CH2 Markers
2:-2 0.8 89 dB
5. 60000 GH z
Cor
3:-1 9. 7 47 dB
5. 75 0 00 GHz
Hld
START 5 0 00. 0 00 0 0 0 MHz
Certificate No: D5GHzV2-1006_Sep17
STOP 6 00 0.000 000 MHz
Page 13 of 13

Download: X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Mirror Download [FCC.gov]X00QSA ASUS Phone (Mobile phone) RF Exposure Info RFExp. Appendix C-1 ASUSTeK Computer Inc
Document ID3799362
Application ID5OKY8F4uzH8MJTE8QY7yZQ==
Document DescriptionRFExp. Appendix C-1
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize186.93kB (2336628 bits)
Date Submitted2018-03-28 00:00:00
Date Available2018-04-09 00:00:00
Creation Date2018-03-22 18:09:16
Producing SoftwareFoxit PhantomPDF 印表機版本 7.2.0.0424
Document Lastmod2018-03-22 18:09:16
Document TitleRFExp. Appendix C-1

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Author                          : 
Create Date                     : 2018:03:22 18:09:16+08:00
Modify Date                     : 2018:03:22 18:09:16+08:00
Subject                         : 
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 5.6-c015 84.159810, 2016/09/10-02:41:30
Format                          : application/pdf
Creator                         : 
Description                     : 
Title                           : 
Creator Tool                    : 
Metadata Date                   : 2018:03:22 18:09:16+08:00
Keywords                        : 
Producer                        : Foxit PhantomPDF 印表機版本 7.2.0.0424
Document ID                     : uuid:4f3dc4ca-4af2-4438-b263-95a10295d056
Instance ID                     : uuid:9798c902-6bfe-4102-997f-f9aa566f0634
Page Count                      : 50