FCC ID P6ZC100063

UHF Base Station Transceiver

by Westel Wireless Systems Pty Ltd

Grantee Code: P6Z   Product Code: C100063
Latest application date: 2003-07-31

FCC ID Device Details

FCC IDP6ZC100063
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeP6Z
Product CodeC100063
Applicant BusinessWestel Wireless Systems Pty Ltd 🇦🇺
Related Domains westelwireless.com
Equipment ClassUHF Base Station Transceiver
Test FirmM. Flom Associates, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
400-470 MHzOriginal Equipment2003-07-31

Exhibits

DocumentTypeAvailableFile
MANUAL APPENDIX AUsers Manual2003-07-31PDF 33.2 KB
MANUAL APPENDIX BUsers Manual2003-07-31PDF 7.8 KB
MANUAL DIAGNOSTIC MONITERUsers Manual2003-07-31PDF 363.1 KB
MANUAL INSTALLATION INSTRUCTIONSUsers Manual2003-07-31PDF 326.3 KB
MANUAL INTRODUCTIONUsers Manual2003-07-31PDF 186.9 KB
OPERATOR MANUALUsers Manual2003-07-31PDF 40.5 KB
PRELIMINARY MANUALUsers Manual2003-07-31PDF 23.9 KB
PROGRAMMING AND CONFIGURATION MANUALUsers Manual2003-07-31PDF 732.7 KB
Internal Photos PA SOLDER SIDEInternal Photos2003-07-31PDF 145.6 KB
Internal Photos Transceiver Component of side 1 of 2Internal Photos2003-07-31PDF 1.5 MB
Internal Photos component of side 2 of 2Internal Photos2003-07-31PDF 399 KB
Internal Photos transceiver solder sideInternal Photos2003-07-31PDF 242.7 KB
internal photos PA COMPONET SIDEInternal Photos2003-07-31PDF 1.7 MB
External Photos PA FRONTExternal Photos2003-07-31PDF 538.9 KB
External Photos PA SIDEExternal Photos2003-07-31PDF 1.1 MB
External Photos PA REARExternal Photos2003-07-31PDF 990.4 KB
External Photos TRANSCEIVER FRONTExternal Photos2003-07-31PDF 971 KB
External Photos TRANSCEIVER SIDEExternal Photos2003-07-31PDF 2 MB
external Photo whole unit rearExternal Photos2003-07-31PDF 1.4 MB
whole unit frontExternal Photos2003-07-31PDF 1.2 MB
id label locationID Label/Location Info2003-07-31PDF 171.2 KB
id label sampleID Label/Location Info2003-07-31PDF 9.8 KB
block diagramBlock Diagram2003-07-31PDF 10.3 KB
operational descriptionOperational Description2003-07-31PDF 183.7 KB
plotsTest Report2003-07-31PDF 236.9 KB
test reportTest Report2003-07-31PDF 1.5 MB
attestation letterAttestation Statements2003-07-31PDF 121 KB
confidential letterCover Letter(s)2003-07-31PDF 18.8 KB
mpe reportRF Exposure Info2003-07-31PDF 594.7 KB
tune up infoParts List/Tune Up Info2003-07-31PDF 4.1 KB
SCHEMATICS DIGITAL CARD Metadata onlySchematicsPDF 430.2 KB
SCHEMATICS MODULE RF CARD Metadata onlySchematicsPDF 484.2 KB
SCHEMATICS PA MODULE Metadata onlySchematicsPDF 512.6 KB
controller module Metadata onlySchematicsPDF 449.7 KB
sCHEMATICS INTERFACE MODULE Metadata onlySchematicsPDF 345.8 KB
schematics 4 w card Metadata onlySchematicsPDF 1.1 MB
parts list Controler BOM Metadata onlyParts List/Tune Up InfoPDF 21.3 KB
parts list Digital Board BOM Metadata onlyParts List/Tune Up InfoPDF 21.8 KB
parts list Interface 4W Metadata onlyParts List/Tune Up InfoPDF 6.4 KB
parts list Interface PL 3300 Metadata onlyParts List/Tune Up InfoPDF 9 KB
parts list UHF PA BOM Metadata onlyParts List/Tune Up InfoPDF 21.5 KB
parts list UHF Transceiver BOM 3305 Metadata onlyParts List/Tune Up InfoPDF 36.3 KB

Application Information

Application IDPG/C/iWWrBZnQZ9PFf1kCA==
Final Action Date2003-07-31
Application PurposeOriginal Equipment
Applicant FRN0006350904
ModelC100063
Frequency Range400-470 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionUHF Base Station Transceiver
Responsible PartySteve Tucker, Chief Technical Officer, stucker@westelwireless.com , 61 2 9948 6564
Test FirmMorton Flom, M. Flom Associates, Inc., info@mflom.com , 480-926-3100
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 70cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 60W and the peak radiated output power must not exceed 100W EIRP. The duty factor is not to exceed 50%. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
PG/C/iWWrBZnQZ9PFf1kCA==2003-07-31Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
400-470 MHz61.5ppm16K0F3E90, 95A
400-470 MHz61.5ppm11K0F3E90.210, 95A
400-470 MHz601.5ppm16K0F3E9BD
400-470 MHz601.5ppm11K0F3E90.21BD

Grants

TCB Grant - Application PG/C/iWWrBZnQZ9PFf1kCA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 07/31/2003

Application Dated: 07/31/2003
Westel Wireless Systems Pty Ltd
23, The Corso
Level 1
Manly, NSW 2095
Australia
 
Attention: Steve Tucker , Chief Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P6ZC100063
Name of Grantee:  Westel Wireless Systems Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Base Station Transceiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90, 95A 400.0  -  470.0 6.0 1.5  PM 16K0F3E
95A, 90.210 400.0  -  470.0 6.0 1.5  PM 11K0F3E
BD 90 400.0  -  470.0 60.0 1.5  PM 16K0F3E
BD 90.210 400.0  -  470.0 60.0 1.5  PM 11K0F3E

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 70cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 60W and the peak radiated output power must not exceed 100W EIRP. The duty factor is not to exceed 50%. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

EAS Grant - Application PG/C/iWWrBZnQZ9PFf1kCA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Westel Wireless Systems Pty Ltd
23, The Corso Level 1
Manly, NSW 2095
Australia
  Date of Grant: 07/31/2003

Application Dated: 07/31/2003
 
Attention: Steve Tucker , Chief Technical Officer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  P6ZC100063
Name of Grantee:  Westel Wireless Systems Pty Ltd
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: UHF Base Station Transceiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
90, 95A 400.0  -  470.0 6.0 1.5  PM 16K0F3E
95A, 90.210 400.0  -  470.0 6.0 1.5  PM 11K0F3E
BD 90 400.0  -  470.0 60.0 1.5  PM 16K0F3E
BD 90.210 400.0  -  470.0 60.0 1.5  PM 11K0F3E

Power listed is conducted. The antenna(s) used for this transmitter must be fixed-mounted on outdoor permanent structures with a separation distance of at least 70cm from all persons during normal operation. The peak conducted output power at each antenna terminal must not exceed 60W and the peak radiated output power must not exceed 100W EIRP. The duty factor is not to exceed 50%. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of §1.1307(b)(3), for satisfying RF exposure compliance.


BD: The output power is continuously variable from the value listed in this entry to 10%-15% of the value listed.

Mail To: