FCC ID PKRNVWV620
PCMCIA
by Inseego Corp.
Grantee Code: PKR Product Code: NVWV620
Latest application date: 2005-07-18
FCC ID Device Details
| FCC ID | PKRNVWV620 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | PKR |
| Product Code | NVWV620 |
| Applicant Business | Inseego Corp. 🇺🇸 |
| Related Domains |  inseego.com |
| Equipment Class | PCMCIA |
| Test Firm | M. Flom Associates, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 824.7-848.3 MHz | Class II permissive change or modification of presently authorized equipment | 2005-07-18 |
| 824.7-848.3 MHz | Original Equipment | 2004-09-01 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| USERS MANUAL | Users Manual | 2005-07-18 | PDF 1.4 MB |
| USERS MANUAL | Users Manual | 2004-09-01 | PDF 365.8 KB |
| EXTERNAL PHOTOS | External Photos | 2004-09-01 | PDF 13.7 KB |
| ID LABEL SAMPLE | ID Label/Location Info | 2004-09-01 | PDF 51.6 KB |
| antenna spec sheet | Operational Description | 2005-07-18 | PDF 61 KB |
| TEST REPORT | Test Report | 2005-07-18 | PDF 309.8 KB |
| TEST REPORT 1 | Test Report | 2004-09-01 | PDF 126.6 KB |
| TEST REPORT 2 | Test Report | 2004-09-01 | PDF 1.2 MB |
| COVER LETTER | Cover Letter(s) | 2005-07-18 | PDF 337.2 KB |
| CONFIDENTIALITY LETTER | Cover Letter(s) | 2004-09-01 | PDF 41.8 KB |
| Page 6 of 6 revised MPE | RF Exposure Info | 2005-07-18 | PDF 14.7 KB |
| RF EXPOSURE | RF Exposure Info | 2004-09-01 | PDF 3.3 MB |
| INTERNAL PHOTOS Metadata only | Internal Photos | PDF 321.5 KB | |
| BLOCK DIAGRAM Metadata only | Block Diagram | PDF 17.7 KB | |
| SCHEMATICS Metadata only | Schematics | PDF 510.9 KB | |
| OPERATIONAL DESCRIPTION Metadata only | Operational Description | PDF 40.8 KB | |
| ACTIVE DEVICES Metadata only | Parts List/Tune Up Info | PDF 3.9 KB | |
| PARTS LIST Metadata only | Parts List/Tune Up Info | PDF 11.9 KB | |
| TUNE UP Metadata only | Parts List/Tune Up Info | PDF 37.7 KB |
Application Information
| Application ID | w9FfC2hQyyLY0LztWh74Yw== |
|---|---|
| Final Action Date | 2005-07-18 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0003757176 |
| Model | NVWV620 |
| Frequency Range | 824.7-848.3 MHz |
| Equipment Class | PCB - PCS Licensed Transmitter |
| Device Description | PCMCIA |
| Responsible Party | Roman Olmos, Staff Regulatory Engineer, Roman.Olmos@inseego.com , 858-812-3400 |
| Test Firm | Morton Flom, M. Flom Associates, Inc., info@mflom.com  , 480-926-3100 |
| TCB Email | TEI@TIMCOENGR.COM  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For use in RF exposure portable conditions: The maximum ERP for part 22 is 646mW and the maximum EIRP for part 24 is 324mW. SAR compliance has been established in the host product(s) with PCMCIA slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for the filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR levels are: Part 22: Body: 1.21 W/kg, and Part 24 Body: 1.33W/kg. For use in RF exposure mobile conditions: The maximum ERP for part 22 is 790mW and the maximum EIRP for part 24 is 980mW measured for antenna(s) described in this filing. For vehicle-mounted operations, the antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| w9FfC2hQyyLY0LztWh74Yw== | 2005-07-18 | Class II permissive change or modification of presently authorized equipment |
| mc1sF2plSNhflcEUwThnqw== | 2004-09-01 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application w9FfC2hQyyLY0LztWh74Yw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/18/2005 Application Dated: 07/18/2005 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWV620 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCMCIA |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 0.251 | 1.0 PM | 1M25F9W | |
| 22 | 824.7 - 848.3 | 0.282 | 1.0 PM | 1M25F9W |
| Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For use in RF exposure portable conditions: The maximum ERP for part 22 is 646mW and the maximum EIRP for part 24 is 324mW. SAR compliance has been established in the host product(s) with PCMCIA slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for the filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR levels are: Part 22: Body: 1.21 W/kg, and Part 24 Body: 1.33W/kg. For use in RF exposure mobile conditions: The maximum ERP for part 22 is 790mW and the maximum EIRP for part 24 is 980mW measured for antenna(s) described in this filing. For vehicle-mounted operations, the antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. |
EAS Grant - Application w9FfC2hQyyLY0LztWh74Yw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inseego Corp. 9710 Scranton Road Suite 200 San Diego, CA 92121 United States |
Date of Grant: 07/18/2005 Application Dated: 07/18/2005 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWV620 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCMCIA |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 0.251 | 1.0 PM | 1M25F9W | |
| 22 | 824.7 - 848.3 | 0.282 | 1.0 PM | 1M25F9W |
| Power listed is conducted. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For use in RF exposure portable conditions: The maximum ERP for part 22 is 646mW and the maximum EIRP for part 24 is 324mW. SAR compliance has been established in the host product(s) with PCMCIA slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for the filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR levels are: Part 22: Body: 1.21 W/kg, and Part 24 Body: 1.33W/kg. For use in RF exposure mobile conditions: The maximum ERP for part 22 is 790mW and the maximum EIRP for part 24 is 980mW measured for antenna(s) described in this filing. For vehicle-mounted operations, the antenna installation and operating configurations of this transmitter, including any applicable source-based time-averaging duty factor, antenna gain and cable loss must satisfy MPE categorical Exclusion Requirements of §2.1091. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 09/01/2004 Application Dated: 09/01/2004 |
| Inseego Corp. |
| 9710 Scranton Road |
| Suite 200 |
| San Diego, CA 92121 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWV620 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCMCIA |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 0.251 | 1.0 PM | 1M25F9W | |
| 22 | 824.7 - 848.3 | 0.282 | 1.0 PM | 1M25F9W |
| Power listed is conducted. The maximum ERP for part 22 is 646mW and the maximum EIRP for part 24 is 324mW. SAR compliance has been established in the host product(s) with PCMCIA slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for the filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR levels are: Part 22: Body: 1.21 W/kg, and Part 24 Body: 1.33W/kg. |
EAS Grant - Application mc1sF2plSNhflcEUwThnqw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Inseego Corp. 9710 Scranton Road Suite 200 San Diego, CA 92121 United States |
Date of Grant: 09/01/2004 Application Dated: 09/01/2004 |
| Attention: Roman Olmos , Staff Regulatory Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | PKRNVWV620 |
| Name of Grantee: | Inseego Corp. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | PCMCIA |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1851.25 - 1908.75 | 0.251 | 1.0 PM | 1M25F9W | |
| 22 | 824.7 - 848.3 | 0.282 | 1.0 PM | 1M25F9W |
| Power listed is conducted. The maximum ERP for part 22 is 646mW and the maximum EIRP for part 24 is 324mW. SAR compliance has been established in the host product(s) with PCMCIA slot configurations as tested in this filing, and can be used in host product(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. This transmitter is restricted for use with the specific antenna(s) tested for the filing. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific information required to satisfy RF exposure compliance for all final host devices. The highest reported SAR levels are: Part 22: Body: 1.21 W/kg, and Part 24 Body: 1.33W/kg. |
| Mail To: |