TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.

Philips Medical Systems North America Co. Range Extender for SRR measurements via WLAN

Page 1 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 2 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 3 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 4 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 5 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 6 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 7 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 8 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 9 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 10 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 11 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 12 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 13 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 14 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 15 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 16 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 17 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 18 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 19 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 20 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 21 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 22 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 23 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 24 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 25 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 26 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 27 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 28 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 29 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 30 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 31 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 32 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 33 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 34 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 35 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 36 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 37 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 38 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 39 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 40 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 41 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 42 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 43 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 44 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 45 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 46 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 47 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 48 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 49 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 50 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 51 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 52 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 53 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Page 54 of TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.

TEST REPORT
Test Report No.: 1-2856/16-01-03
D-PL-12076-01-03
BNetzA-CAB-02/21-102
Testing Laboratory
Applicant
Philips Medizin Systeme Böblingen GmbH
Hewlett-Packard-Strasse 2
71034 Böblingen/GERMANY
CTC advanced GmbH
Untertuerkheimer Strasse 6 – 10
66117 Saarbruecken/Germany
Phone:
+ 49 681 5 98 - 0
Fax:
+ 49 681 5 98 - 9075
Internet: http://www.ctcadvanced.com
e-mail:
mail@ctcadvanced.com
Accredited Test Laboratory:
The testing laboratory (area of testing) is accredited
according to DIN EN ISO/IEC 17025 (2005) by the
Deutsche Akkreditierungsstelle GmbH (DAkkS)
The accreditation is valid for the scope of testing
procedures as stated in the accreditation certificate with
the registration number: D-PL-12076-01-03
Contact:
e-mail:
Phone:
Fax:
Markus Stacha
markus.stacha@philips.com
+49 7031 463-2840
+49 7031 463-2442
Manufacturer
Philips Medizin Systeme Böblingen GmbH
Hewlett-Packard-Strasse 2
71034 Böblingen/GERMANY
Test Standard/s
IEEE 1528-2013
Recommended Practice for Determining the Peak Spatial-Average Specific Absorption Rate
(SAR) in the Human Head from Wireless Communications Devices: Measurement
Techniques
For further applied test standards please refer to section 3 of this test report.
Test Item
Kind of test item:
Device type:
Model name:
Product Number:
S/N serial number:
FCC-ID:
Hardware status:
Software status:
Frequency:
Antenna:
Battery option:
Auxiliary equipment:
Test sample status:
Exposure category:
Range Extender for SRR measurements via WLAN
portable device
IntelliVue CL Transmitter 865221
865221
D932Y0201
PQC-TRNSBV1
PW100120BA
3.2.0.137 api 3
see technical details
integrated antenna
Integrated battery
Laptop computer with control software
identical prototype
general population / uncontrolled environment
This test report is electronically signed and valid without handwriting signature. For verification of the electronic
signatures, the public keys can be requested at the testing laboratory.
Test Report authorised:
Test performed:
cn=Alexander Hnatovskiy, o=CTC
advanced GmbH,
ou=HNA-161129,
email=Alexander.Hnatovskiy@ctca
dvanced.com, c=DE
2018.03.12 11:57:09 +01'00'
Alexander Hnatovskiy
Lab Manager
Radio Communications & EMC
© CTC advanced GmbH
cn=Marco Scigliano, o=CTC
advanced GmbH, ou=SCI-161125,
email=marco.scigliano@ctcadvanc
ed.com, c=DE
2018.03.12 11:58:36 +01'00'
Marco Scigliano
Testing Manager
Radio Communications & EMC
Page 1 of 54
Test report no.: 1-2856/16-01-03
Table of contents
Table of contents .......................................................................................................................................2
General information ..................................................................................................................................4
2.1
2.2
2.3
2.4
2.5
Notes and disclaimer .....................................................................................................................4
Application details .........................................................................................................................4
Statement of compliance ...............................................................................................................4
Technical details ............................................................................................................................5
Transmitter and Antenna Operating Configurations ..................................................................5
Test standards/ procedures references ..................................................................................................6
3.1
RF exposure limits .........................................................................................................................7
Summary of Measurement Results .........................................................................................................8
Test Environment ......................................................................................................................................8
Test Set-up .................................................................................................................................................9
6.1
Measurement system .....................................................................................................................9
6.1.1
System Description ................................................................................................................9
6.1.2
Test environment .................................................................................................................10
6.1.3
Probe description .................................................................................................................10
6.1.4
Phantom description ............................................................................................................11
6.1.5
Device holder description ....................................................................................................12
6.1.6
Scanning procedure ............................................................................................................13
6.1.7
Spatial Peak SAR Evaluation ..............................................................................................14
6.1.8
Data Storage and Evaluation...............................................................................................15
6.1.9
Tissue simulating liquids: dielectric properties ....................................................................17
6.1.10 Tissue simulating liquids: parameters .................................................................................17
6.1.11 Measurement uncertainty evaluation for SAR test ..............................................................18
6.1.12 Measurement uncertainty evaluation for System Check .....................................................22
6.1.13 System check ......................................................................................................................24
6.1.14 System check procedure .....................................................................................................25
6.1.15 System validation ................................................................................................................26
Detailed Test Results ..............................................................................................................................27
7.1
Conducted power measurements...............................................................................................27
7.1.1
Conducted power measurements WLAN 2.4 GHz ..............................................................27
7.1.2
Conducted power measurements WLAN 5 GHz .................................................................27
7.1.3
Standalone SAR Test Exclusion .........................................................................................28
7.1.4
SAR measurement positions ...............................................................................................29
7.2
SAR test results ............................................................................................................................30
7.2.1
Results overview .................................................................................................................30
7.2.2
General description of test procedures ...............................................................................31
7.2.3
Multiple Transmitter Information ..........................................................................................32
Test equipment and ancillaries used for tests .....................................................................................33
Observations ...........................................................................................................................................33
Annex A:
System performance check .....................................................................................................34
Annex B:
DASY5 measurement results...................................................................................................42
Annex B.1: WLAN 2450 MHz ..................................................................................................................42
Annex B.2: WLAN 5GHz ..........................................................................................................................43
Annex B.3: Liquid depth .........................................................................................................................47
© CTC advanced GmbH
Page 2 of 54
Test report no.: 1-2856/16-01-03
Annex C:
Photo documentation ...............................................................................................................48
Annex D:
Calibration parameters .............................................................................................................54
Annex E:
Document History .....................................................................................................................54
Annex F:
Further Information ..................................................................................................................54
© CTC advanced GmbH
Page 3 of 54
Test report no.: 1-2856/16-01-03
General information
2.1
Notes and disclaimer
The test results of this test report relate exclusively to the test item specified in this test report. CTC
advanced GmbH does not assume responsibility for any conclusions and generalisations drawn from the test
results with regard to other specimens or samples of the type of the equipment represented by the test item.
The test report may only be reproduced or published in full. Reproduction or publication of extracts from the
report requires the prior written approval of CTC advanced GmbH.
This test report is electronically signed and valid without handwriting signature. For verification of the
electronic signatures, the public keys can be requested at the testing laboratory.
The testing service provided by CTC advanced GmbH has been rendered under the current "General Terms
and Conditions for CTC advanced GmbH".
CTC advanced GmbH will not be liable for any loss or damage resulting from false, inaccurate, inappropriate
or incomplete product information provided by the customer.
Under no circumstances does the CTC advanced GmbH test report include any endorsement or warranty
regarding the functionality, quality or performance of any other product or service provided.
Under no circumstances does the CTC advanced GmbH test report include or imply any product or service
warranties from CTC advanced GmbH, including, without limitation, any implied warranties of
merchantability, fitness for purpose, or non-infringement, all of which are expressly disclaimed by CTC
advanced GmbH.
All rights and remedies regarding vendor’s products and services for which CTC advanced GmbH has
prepared this test report shall be provided by the party offering such products or services and not by CTC
advanced GmbH.
In no case this test report can be considered as a Letter of Approval.
2.2
Application details
Date of receipt of order:
Date of receipt of test item:
Start of test:
End of test:
Person(s) present during the test:
2.3
2013-02-01
2013-10-18
2013-10-22
2013-10-29
Statement of compliance
The SAR values found for the IntelliVue CL Transmitter 865221 Range Extender for SRR measurements via
WLAN are below the maximum recommended levels of 1.6 W/Kg as averaged over any 1 g tissue according
to the FCC rule §2.1093, the ANSI/IEEE C 95.1:1992, the NCRP Report Number 86 for uncontrolled
environment, according to the Health Canada’s Safety Code 6 and the Industry Canada Radio Standards
Specification RSS-102 for General Population/Uncontrolled exposure.
For body worn operation, this device has been tested and meets FCC RF exposure guidelines when used
with any accessory that contains no metal and that positions the handset a minimum of 10 mm from the
body.
© CTC advanced GmbH
Page 4 of 54
Test report no.: 1-2856/16-01-03
2.4
Technical details
The DUT contains multiple transmitters:
1.
IEEE 802.11 a/b/g/n WLAN Module (Model name: WLANBV2-A) with integrated PCB antenna
2.
Dual IEEE 802.15.4 Short Range Radio (SRR) transmitter with integrated chip antennas
3.
Medical Body Area Network (MBAN)
Lowest transmit frequency/MHz
Highest transmit frequency/MHz
Lowest receive Frequency/MHz
Highest receive Frequency/MHz
Tested power control level
Test channel low
Test channel middle
Test channel high
Max. average output power/dBm
WLAN
2412
2472
2412
2472
CCK
OFDM
max
13
---
WLAN
US
2412
2462
2412
2462
CCK
OFDM
max
11
13.7
WLAN
5180
5240
5180
5240
OFDM
max 36
--
--
15.8
WLAN
5260
5320
5260
5320
OFDM
max
--
60
--
15.5
WLAN
5500
5700
5500
5700
OFDM
max
--
112
--
15.7
WLAN
5745
5825
5745
5825
OFDM
max
--
--
Kind of modulation
Technology
Band tested for this test report
The transmitters have the following capabilities:
161 14.8
SRR 1 ID248
2405MHz … 2480MHz
DSSS
max
--
--
--
5.4
SRR 2 ID251
2405MHz … 2480MHz
DSSS
max
--
--
--
3.9
MBAN 1 ID248
2360MHz … 2400MHz
---
max
--
--
--
7.1
MBAN 2 ID251
2360MHz … 2400MHz
---
max
--
--
--
5.5
Note: SRR (Short Range Radio) was not tested for SAR (output power < 60/f mW)
2.5
Transmitter and Antenna Operating Configurations
Simultaneous transmission conditions
MBAN + SRR + WLAN 2.4GHz
MBAN + SRR + WLAN 5GHz
Table 1: Simultaneous transmission conditions
© CTC advanced GmbH
Page 5 of 54
Test report no.: 1-2856/16-01-03
Test standards/ procedures references
Test Standard
IEEE 1528-2013
Version
2013-06
Test Standard Description
Recommended Practice for Determining the Peak SpatialAverage Specific Absorption Rate (SAR) in the Human
Head from Wireless Communications Devices:
Measurement Techniques
IEEE Std. C95-3
2002
IEEE Recommended Practice for the Measurement of
Potentially Hazardous Electromagnetic Fields – RF and
Microwave
IEEE Std. C95-1
2005
IEEE Standard for Safety Levels with Respect to Human
Exposure to Radio Frequency Electromagnetic Fields, 3 kHz
to 300 GHz.
IEC 62209-2
2010
Human exposure to radio frequency fields from hand-held
and body mounted wireless communication devices. Human
models, instrumentation, and procedures. Procedure to
determine the specific absorption rate (SAR) for wireless
communication devices used in close proximity to the
human body (frequency range of 30 MHz to 6 GHz)
FCC KDBs:
KDB 865664D01v01
KDB 865664D02v01
KDB 447498D01v05
KDB 648474D04v01
KDB 248227D01v01
KDB 450824D01v01
KDB 450824D01v01
© CTC advanced GmbH
May 28,
2013
May 28,
2013
May 28,
2013
May 28,
2013
May, 2007
FCC OET SAR measurement requirements 100 MHz to 6 GHz
January,
2007
March 4,
2012
SAR Probe Calibration and System Verification considerations for
measurements from 150 MHz to 3 GHz
Dipole Requirements for SAR System Validation and Verification
RF Exposure Compliance Reporting and Documentation
Considerations
Mobile and Portable Devices RF Exposure Procedures and
Equipment Authorization Policies
SAR Evaluation Considerations for Wireless Handsets
SAR Measurement Procedures for 802.11 a/b/g Transmitters
Page 6 of 54
Test report no.: 1-2856/16-01-03
3.1
RF exposure limits
Human Exposure
Spatial Peak SAR*
(Brain and Trunk)
Spatial Average SAR**
(Whole Body)
Spatial Peak SAR***
(Hands/Feet/Ankle/Wrist)
Uncontrolled Environment
General Population
Controlled Environment
Occupational
1.60 mW/g
8.00 mW/g
0.08 mW/g
0.40 mW/g
4.00 mW/g
20.00 mW/g
Table 2: RF exposure limits
The limit applied in this test report is shown in bold letters
Notes:
The Spatial Peak value of the SAR averaged over any 1 gram of tissue (defined as a tissue volume
in the shape of a cube) and over the appropriate averaging time
**
The Spatial Average value of the SAR averaged over the whole body.
***
The Spatial Peak value of the SAR averaged over any 10 grams of tissue (defined as a tissue
volume in the shape of a cube) and over the appropriate averaging time.
Uncontrolled Environments are defined as locations where there is the exposure of individuals who have no
knowledge or control of their exposure.
Controlled Environments are defined as locations where there is exposure that may be incurred by persons
who are aware of the potential for exposure, (i.e. as a result of employment or occupation).
© CTC advanced GmbH
Page 7 of 54
Test report no.: 1-2856/16-01-03
Summary of Measurement Results
No deviations from the technical specifications ascertained
Deviations from the technical specifications ascertained
Maximum SAR value reported for 1g (W/kg)
DTS
UNII
body worn front side 10 mm distance
0.285
0.335
body worn 0 mm distance
0.743
0.302
collocated
situations
ΣSAR evaluation 10 mm
distance
0.407
ΣSAR evaluation 0 mm
distance
0.888
Test Environment
Ambient temperature:
Tissue Simulating liquid:
20 – 24 °C
20 – 24 °C
Relative humidity content:
Air pressure:
Power supply:
40 – 50 %
not relevant for this kind of testing
230 V / 50 Hz
Exact temperature values for each test are shown in the table(s) under 7.1 and/or on the measurement plots.
© CTC advanced GmbH
Page 8 of 54
Test report no.: 1-2856/16-01-03
Test Set-up
6.1
Measurement system
6.1.1 System Description

The DASY system for performing compliance tests consists of the following items:

A standard high precision 6-axis robot (Stäubli RX/TX family) with controller and software. An arm
extension for accommodating the data acquisition electronics (DAE).

A dosimetric probe, i.e. an isotropic E-field probe optimized and calibrated for usage in tissue
simulating liquid.

A data acquisition electronic (DAE) which performs the signal amplification, signal multiplexing, ADconversion, offset measurements, mechanical surface detection, collision detection, etc. The unit is
battery powered with standard or rechargeable batteries. The signal is optically transmitted to the
EOC.
The Electro-Optical Coupler (EOC) performs the conversion from the optical into a digital electric
signal of the DAE. The EOC is connected to the DASY measurement server.
The DASY measurement server, which performs all real-time data evaluation for field measurements
and surface detection, controls robot movements and handles safety operation. A computer
operating Windows 7.
DASY software and SEMCAD data evaluation software.
Remote control with teach panel and additional circuitry for robot safety such as warning lamps, etc.
The generic twin phantom enabling the testing of left-hand and right-hand usage.
The triple flat and eli phantom for the testing of handheld and body-mounted wireless devices.
The device holder for handheld mobile phones and mounting device adaptor for laptops
Tissue simulating liquid mixed according to the given recipes.
System check dipoles allowing to validate the proper functioning of the system.









© CTC advanced GmbH
Page 9 of 54
Test report no.: 1-2856/16-01-03
6.1.2 Test environment
The DASY measurement system is placed in a laboratory room within an environment which avoids
influence on SAR measurements by ambient electromagnetic fields and any reflection from the environment.
The pictures at the beginning of the photo documentation show a complete view of the test environment. The
system allows the measurement of SAR values larger than 0.005 mW/g.
6.1.3 Probe description
Isotropic E-Field Probe ET3DV6 for Dosimetric Measurements
Technical data according to manufacturer information
Construction
Calibration
Frequency
Directivity
Dynamic range
Optical Surface Detection
Dimensions
Application
© CTC advanced GmbH
Symmetrical design with triangular core
Built-in optical fiber for surface detection system
Built-in shielding against static charges
PEEK enclosure material (resistant to organic solvents,
e.g., glycolether)
In air from 10 MHz to 2.5 GHz
In head tissue simulating liquid (HSL) at 900 (800-1000)
MHz and 1.8 GHz (1700-1910 MHz) (accuracy ± 9.5%;
k=2) Calibration for other liquids and frequencies upon
request
10 MHz to 3 GHz (dosimetry); Linearity: ± 0.2 dB (30 MHz
to 3 GHz)
± 0.2 dB in HSL (rotation around probe axis)
± 0.4 dB in HSL (rotation normal to probe axis)
5 µW/g to > 100 mW/g; Linearity: ± 0.2 dB
± 0.2 mm repeatability in air and clear liquids over diffuse
reflecting surfaces (ET3DV6 only)
Overall length: 330 mm
Tip length: 16 mm
Body diameter: 12 mm
Tip diameter: 6.8 mm
Distance from probe tip to dipole centers: 2.7 mm
General dosimetry up to 3 GHz
Compliance tests of mobile phones
Fast automatic scanning in arbitrary phantoms (ET3DV6)
Page 10 of 54
Test report no.: 1-2856/16-01-03
6.1.4 Phantom description
The used SAM Phantom meets the requirements specified in FCC KDB865664 D01 for Specific Absorption
Rate (SAR) measurements.
The phantom consists of a fibreglass shell integrated in a wooden table. It allows left-hand and right-hand
head as well as body-worn measurements with a maximum liquid depth of 18 cm in head position and 22 cm
in planar position (body measurements). The thickness of the Phantom shell is 2 mm +/- 0.1 mm.
ear reference point right hand side
ear reference point left hand side
reference point flat position
Triple Modular Phantom consists of three identical
modules which can be installed and removed
separately without emptying the liquid. It includes
three reference points for phantom installation. Covers
prevent evaporation of the liquid. Phantom material is
resistant to DGBE based tissue simulating liquids.
© CTC advanced GmbH
Page 11 of 54
Test report no.: 1-2856/16-01-03
6.1.5 Device holder description
The DASY device holder has two scales for device rotation (with respect to the body axis) and the device
inclination (with respect to the line between the ear openings). The plane between the ear openings and the
mouth tip has a rotation angle of 65°. The bottom plate contains three pair of bolts for locking the device
holder. The device holder positions are adjusted to the standard measurement positions in the three
sections. This device holder is used for standard mobile phones or PDA’s only. If necessary an additional
support of polystyrene material is used.
Larger DUT’s (e.g. notebooks) cannot be tested using this device holder.
Instead a support of bigger polystyrene cubes and thin polystyrene plates is
used to position the DUT in all relevant positions to find and measure spots
with maximum SAR values.
Therefore those devices are normally only tested at the flat part of the SAM.
© CTC advanced GmbH
Page 12 of 54
Test report no.: 1-2856/16-01-03
6.1.6 Scanning procedure

The DASY installation includes predefined files with recommended procedures for measurements
and system check. They are read-only document files and destined as fully defined but unmeasured
masks. All test positions (head or body-worn) are tested with the same configuration of test steps
differing only in the grid definition for the different test positions.

The „reference“ and „drift“ measurements are located at the beginning and end of the batch process.
They measure the field drift at one single point in the liquid over the complete procedure. The
indicated drift is mainly the variation of the DUT’s output power and should vary max. +/- 5 %.

The highest integrated SAR value is the main concern in compliance test applications. These values
can mostly be found at the inner surface of the phantom and cannot be measured directly due to the
sensor offset in the probe. To extrapolate the surface values, the measurement distances to the
surface must be known accurately. A distance error of 0.5mm could produce SAR errors of 6% at
1800 MHz. Using predefined locations for measurements is not accurate enough. Any shift of the
phantom (e.g., slight deformations after filling it with liquid) would produce high uncertainties. For an
automatic and accurate detection of the phantom surface, the DASY5 system uses the mechanical
surface detection. The detection is always at touch, but the probe will move backward from the
surface the indicated distance before starting the measurement.

The „area scan“ measures the SAR above the DUT or verification dipole on a parallel plane to the
surface. It is used to locate the approximate location of the peak SAR with 2D spline interpolation.
The robot performs a stepped movement along one grid axis while the local electrical field strength is
measured by the probe. The probe is touching the surface of the SAM during acquisition of
measurement values. The scan uses different grid spacings for different frequency measurements.
Standard grid spacing for head measurements in frequency ranges ≤ 2GHz is 15 mm in x- and ydimension. For higher frequencies a finer resolution is needed, thus for the grid spacing is reduced
according the following table:
Area scan grid spacing for different frequency ranges
Frequency range
Grid spacing
≤ 2 GHz
≤ 15 mm
2 – 4 GHz
≤ 12 mm
4 – 6 GHz
≤ 10 mm
Grid spacing and orientation have no influence on the SAR result. For special applications where the
standard scan method does not find the peak SAR within the grid, e.g. mobile phones with flip cover,
the grid can be adapted in orientation. Results of this coarse scan are shown in annex B.

A „zoom scan” measures the field in a volume around the 2D peak SAR value acquired in the
previous „coarse“ scan. It uses a fine meshed grid where the robot moves the probe in steps along
all the 3 axis (x,y and z-axis) starting at the bottom of the Phantom. The grid spacing for the cube
measurement is varied according to the measured frequency range, the dimensions are given in the
following table:
Zoom scan grid spacing and volume for different frequency ranges
Grid spacing
Grid spacing
Minimum zoom
Frequency range
for x, y axis
for z axis
scan volume
≤ 2 GHz
≤ 8 mm
≤ 5 mm
≥ 30 mm
2 – 3 GHz
≤ 5 mm
≤ 5 mm
≥ 28 mm
3 – 4 GHz
≤ 5 mm
≤ 4 mm
≥ 28 mm
4 – 5 GHz
≤ 4 mm
≤ 3 mm
≥ 25 mm
5 – 6 GHz
≤ 4 mm
≤ 2 mm
≥ 22 mm
DASY is also able to perform repeated zoom scans if more than 1 peak is found during area scan. In
this document, the evaluated peak 1g and 10g averaged SAR values are shown in the 2D-graphics
in annex B. Test results relevant for the specified standard (see section 3) are shown in table form in
section 7.
© CTC advanced GmbH
Page 13 of 54
Test report no.: 1-2856/16-01-03
6.1.7 Spatial Peak SAR Evaluation
The spatial peak SAR - value for 1 and 10 g is evaluated after the Cube measurements have been done.
The basis of the evaluation are the SAR values measured at the points of the fine cube grid consisting of all
points in the three directions x, y and z. The algorithm that finds the maximal averaged volume is separated
into three different stages.

The data between the dipole center of the probe and the surface of the phantom are extrapolated.
This data cannot be measured since the center of the dipole is 1 to 2.7 mm away from the tip of the
probe and the distance between the surface and the lowest measuring point is about 1 mm (see
probe calibration sheet). The extrapolated data from a cube measurement can be visualized by
selecting ‘Graph Evaluated’.

The maximum interpolated value is searched with a straight-forward algorithm. Around this
maximum the SAR - values averaged over the spatial volumes (1g or 10 g) are computed using the
3d-spline interpolation algorithm. If the volume cannot be evaluated (i.e., if a part of the grid was cut
off by the boundary of the measurement area) the evaluation will be started on the corners of the
bottom plane of the cube.

All neighbouring volumes are evaluated until no neighbouring volume with a higher average value is
found.
Extrapolation
The extrapolation is based on a least square algorithm [W. Gander, Computermathematik, p.168-180].
Through the points in the first 3 cm along the z-axis, polynomials of order four are calculated. These
polynomials are then used to evaluate the points between the surface and the probe tip. The points,
calculated from the surface, have a distance of 1 mm from each other.
Interpolation
The interpolation of the points is done with a 3d-Spline. The 3d-Spline is composed of three one-dimensional
splines with the "Not a knot"-condition [W. Gander, Computermathematik, p.141-150] (x, y and z -direction)
[Numerical Recipes in C, Second Edition, p.123ff ].
Volume Averaging
At First the size of the cube is calculated. Then the volume is integrated with the trapezoidal algorithm. 8000
points (20x20x20) are interpolated to calculate the average.
Advanced Extrapolation
DASY uses the advanced extrapolation option which is able to compensate boundary effects on E-field
probes.
© CTC advanced GmbH
Page 14 of 54
Test report no.: 1-2856/16-01-03
6.1.8 Data Storage and Evaluation
Data Storage
The DASY software stores the acquired data from the data acquisition electronics as raw data (in microvolt
readings from the probe sensors), together with all necessary software parameters for the data evaluation
(probe calibration data, liquid parameters and device frequency and modulation data) in measurement files
with the extension ".DA4", “.DA5x”. The software evaluates the desired unit and format for output each time
the data is visualized or exported. This allows verification of the complete software setup even after the
measurement and allows correction of incorrect parameter settings. For example, if a measurement has
been performed with a wrong crest factor parameter in the device setup, the parameter can be corrected
afterwards and the data can be re-evaluated.
The measured data can be visualized or exported in different units or formats, depending on the selected
probe type ([V/m], [A/m], [°C], [mW/g], [mW/cm²], [dBrel], etc.). Some of these units are not available in
certain situations or show meaningless results, e.g., a SAR output in a lossless media will always be zero.
Raw data can also be exported to perform the evaluation with other software packages.
Data Evaluation by SEMCAD
The SEMCAD software automatically executes the following procedures to calculate the field units from the
microvolt readings at the probe connector. The parameters used in the evaluation are stored in the
configuration modules of the software:
Probe parameters:
Device parameters:
Media parameters:
- Sensitivity
- Conversion factor
- Diode compression point
- Frequency
- Crest factor
- Conductivity
- Density
Normi, ai0, ai1, ai2
ConvFi
Dcpi
cf


These parameters must be set correctly in the software. They can be found in the component documents or
they can be imported into the software from the configuration files issued for the DASY components. In the
direct measuring mode of the multimeter option, the parameters of the actual system setup are used. In the
scan visualization and export modes, the parameters stored in the corresponding document files are used.
The first step of the evaluation is a linearization of the filtered input signal to account for the compression
characteristics of the detector diode. The compensation depends on the input signal, the diode type and the
DC-transmission factor from the diode to the evaluation electronics.
© CTC advanced GmbH
Page 15 of 54
Test report no.: 1-2856/16-01-03
If the exciting field is pulsed, the crest factor of the signal must be known to correctly compensate for peak
power. The formula for each channel can be given as:
Vi = Ui + Ui2 cf/dcpi

with
Vi
Ui
cf
dcpi
= compensated signal of channel i
= input signal of channel i
= crest factor of exciting field
= diode compression point
(i = x, y, z)
(i = x, y, z)
(DASY parameter)
(DASY parameter)
From the compensated input signals the primary field data for each channel can be
evaluated:
E-field probes:
Ei = (Vi / Normi ConvF)1/2
H-field probes:

with
Vi
Normi
Hi = (Vi)1/2 (ai0 + ai1f + ai2f2)/f
ConvF
aij
Ei
Hi


= compensated signal of channel i
= sensor sensitivity of channel i
[mV/(V/m)2] for E-field Probes
= sensitivity enhancement in solution
= sensor sensitivity factors for H-field probes
= carrier frequency [GHz]
= electric field strength of channel i in V/m
= magnetic field strength of channel i in A/m
(i = x, y, z)
(i = x, y, z)
The RSS value of the field components gives the total field strength (Hermitian magnitude):
Etot = (Ex2 + EY2 + Ez2)1/2
The primary field data are used to calculate the derived field units.
SAR = (Etot2 ) / ( 1000)


with
SAR
Etot

= local specific absorption rate in mW/g
= total field strength in V/m
= conductivity in [mho/m] or [Siemens/m]
= equivalent tissue density in g/cm3


Note that the density is normally set to 1 (or 1.06), to account for actual brain density rather than the density
of the simulation liquid.The power flow density is calculated assuming the excitation field to be a free space
field.
Ppwe = Etot2 / 3770
with
or
Ppwe = Htot2 37.7
Ppwe = equivalent power density of a plane wave in mW/cm 2
Etot = total electric field strength in V/m
Htot = total magnetic field strength in A/m
© CTC advanced GmbH
Page 16 of 54

Test report no.: 1-2856/16-01-03
6.1.9 Tissue simulating liquids: dielectric properties
The following materials are used for producing the tissue-equivalent materials.
(Liquids used for tests described in section 7. are marked with
Ingredients
(% of weight)
frequency
band
Tissue Type
Water
Salt (NaCl)
Sugar
HEC
Bactericide
Triton X-100
DGBE
Emulsifiers
Mineral Oil
):
Frequency (MHz)
450
Body
51.16
1.49
46.78
0.52
0.05
0.0
0.0
0.0
0.0
750
Body
51.7
0.9
47.2
0.0
0.1
0.0
0.0
0.0
0.0
835
Body
52.4
1.40
45.0
1.0
0.1
0.0
0.0
0.0
0.0
900
Body
56.0
0.76
41.76
1.21
0.27
0.0
0.0
0.0
0.0
1450
Body
70.97
0.43
0.0
0.0
0.0
0.0
28.60
0.0
0.0
1800
Body
69.91
0.13
0.0
0.0
0.0
0.0
29.96
0.0
0.0
1900
Body
69.91
0.13
0.0
0.0
0.0
0.0
29.96
0.0
0.0
2450
Body
73.2
0.04
0.0
0.0
0.0
0.0
26.7
0.0
0.0
5000
Body
64 - 78
2-3
0.0
0.0
0.0
0.0
0.0
9 - 15
11 - 18
Table 3: Body tissue dielectric properties
Salt: 99+% Pure Sodium Chloride
Water: De-ionized, 16M+ resistivity
Sugar: 98+% Pure Sucrose
HEC: Hydroxyethyl Cellulose
DGBE: 99+% Di(ethylene glycol) butyl ether, [2-(2-butoxyethoxy)ethanol]
Triton X-100(ultra pure): Polyethylene glycol mono [4-(1,1,3,3-tetramethylbutyl)phenyl]ether
6.1.10 Tissue simulating liquids: parameters
Target body tissue
Measurement body tissue
Freq.
Measurement
Conductivity
Conductivity
(MHz) Permittivity
date
Permittivity Dev. %
Dev. %
[S/m]
[S/m]
2450
2412
52.7
1.95
51.4
-2.6%
1.93
-0.9%
2013-10-22
2437
52.7
1.95
51.3
-2.7%
1.96
0.3%
2450
52.7
1.95
51.3
-2.7%
1.97
1.2%
2462
52.7
1.95
51.2
-2.8%
1.99
2.2%
5GHz
5180
49.0
5.30
48.0
-2.0%
5.34
0.8%
2013-10-24
5200
49.0
5.30
48.0
-2.0%
5.34
0.8%
5300
48.9
5.40
47.8
-2.3%
5.46
1.1%
5500
48.6
5.65
47.3
-2.7%
5.71
1.1%
5560
48.6
5.65
47.2
-2.9%
5.78
2.3%
5800
48.2
6.00
46.7
-3.1%
6.10
1.7%
5805
48.2
6.00
46.7
-3.2%
6.12
2.0%
Table 4: Parameter of the body tissue simulating liquid
Note: The dielectric properties have been measured using the contact probe method at 22°C.
Liquid
MSL
© CTC advanced GmbH
Page 17 of 54
Test report no.: 1-2856/16-01-03
6.1.11 Measurement uncertainty evaluation for SAR test
Relative DASY5 Uncertainty Budget for SAR Tests
According to IEEE 1528/2011 and IEC62209-1/2011 (0.3-3GHz range)
ci
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor
Error Description
Value
Distribution
(1g) (10g) ± %, (1g) ± %, (10g) veff
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Modulation Response
Readout electronics
Response time
Integration time
RF ambient noise
RF ambient reflections
Probe positioner
Probe positioning
Max. SAR evaluation
Test Sample Related
Device positioning
Device holder uncertainty
Power drift
Phantom and Set-up
Phantom uncertainty
SAR correction
Liquid conductivity (meas.)
Liquid permittivity (meas.)
Temp. Unc. - Conductivity
Temp. Unc. - Permittivity
Combined Uncertainty
Expanded Std.
Uncertainty
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.0
4.7
9.6
1.0
4.7
1.0
2.4
0.3
0.8
2.6
3.0
3.0
0.4
2.9
2.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
± 2.9 %
± 3.6 %
± 5.0 %
Normal
Normal
Rectangular
√3
±
±
±
±
±
±
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
√
6.1
1.9
5.0
5.0
3.4
0.4
√
√
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.0
1.9
3.9
0.6
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.2
1.7
1.2
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.0
1.9
3.9
0.6
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.2
1.7
1.2
±
±
±
2.9 %
3.6 %
2.9 %
±
±
±
2.9 %
3.6 %
2.9 %
0.78
0.26
0.78
0.23
0.84
0.71
0.26
0.71
0.26
± 3.5
± 1.1
± 2.3
± 0.8
± 1.5
± 0.1
± 11.3
± 22.7 %
± 3.5
± 0.9
± 2.0
± 0.8
± 1.4
± 0.1
± 11.3
± 22.5 %
Table 5: Measurement uncertainties
Worst-Case uncertainty budget for DASY5 assessed according to IEEE 1528/2011
and IEC 62209-1/2011 draft standards. The budget is valid for the frequency range 300MHz -3 GHz and
represents a worst-case analysis. For specific tests and configurations, the uncertainty could be
considerable smaller.
© CTC advanced GmbH
Page 18 of 54
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
145
∞
∞
∞
∞
∞
∞
∞
330
Test report no.: 1-2856/16-01-03
Relative DASY5 Uncertainty Budget for SAR Tests
Error Description
According to IEC62209-2/2010 (30 MHz - 6 GHz range)
ci
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor
Value
Distribution
(1g) (10g) ± %, (1g) ± %, (10g) veff
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Modulation Response
Readout electronics
Response time
Integration time
RF ambient noise
RF ambient reflections
Probe positioner
Probe positioning
Post-processing
Test Sample Related
Device positioning
Device holder uncertainty
Power drift
Phantom and Set-up
Phantom uncertainty
SAR correction
Liquid conductivity (meas.)
Liquid permittivity (meas.)
Temp. Unc. - Conductivity
Temp. Unc. - Permittivity
Combined Uncertainty
Expanded Std.
Uncertainty
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
4.7
9.6
2.0
4.7
1.0
2.4
0.3
0.8
2.6
3.0
3.0
0.8
6.7
4.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
± 2.9 %
± 3.6 %
± 5.0 %
Normal
Normal
Rectangular
√3
±
±
±
±
±
±
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
√
7.9
1.9
5.0
5.0
3.4
0.4
√
√
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
2.9 %
3.6 %
2.9 %
±
±
±
2.9 %
3.6 %
2.9 %
0.78
0.26
0.78
0.23
0.84
0.71
0.26
0.71
0.26
± 4.6
± 1.1
± 2.3
± 0.8
± 1.5
± 0.1
± 12.7
± 25.4 %
± 4.6
± 0.9
± 2.0
± 0.8
± 1.4
± 0.1
± 12.6
± 25.3 %
Table 6: Measurement uncertainties. Worst-Case uncertainty budget for DASY5 assessed according to
according to IEC 62209-2/2010 standard. The budget is valid for the frequency range 30MHz - 6 GHz and
represents a worst-case analysis. For specific tests and configurations, the uncertainty could be
considerable smaller.
© CTC advanced GmbH
Page 19 of 54
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
145
∞
∞
∞
∞
∞
∞
∞
330
Test report no.: 1-2856/16-01-03
Relative DASY5 Uncertainty Budget for SAR Tests
According to IEEE 1528-2003, IEC 62209-1 for the 3-6 GHz range
ci
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor
Error Description
Value
Distribution
(1g) (10g) ± %, (1g) ± %, (10g) veff
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Readout electronics
Response time
Integration time
RF ambient noise
RF ambient reflections
Probe positioner
Probe positioning
Max. SAR evaluation
Test Sample Related
Device positioning
Device holder uncertainty
Power drift
Phantom and Set-up
Phantom uncertainty
Liquid conductivity (target)
Liquid conductivity (meas.)
Liquid permittivity (target)
Liquid permittivity (meas.)
Combined Uncertainty
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
4.7
9.6
2.0
4.7
1.0
0.3
0.8
2.6
3.0
3.0
0.8
6.7
4.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
± 2.9 %
± 3.6 %
± 5.0 %
Normal
Normal
Rectangular
√3
±
±
±
±
±
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
4.0
5.0
5.0
5.0
5.0
√
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
2.9 %
3.6 %
2.9 %
±
±
±
2.9 %
3.6 %
2.9 %
0.64
0.64
0.6
0.6
0.43
0.43
0.49
0.49
± 2.3
± 1.8
± 1.8
± 1.7
± 1.7
± 12.1
± 24.3 %
Expanded Std. Uncertainty
± 2.3
± 1.2
± 1.2
± 1.4
± 1.4
± 11.9
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
145
∞
∞
∞
∞
∞
∞
330
± 23.8 %
Table 7: Measurement uncertainties
Worst-Case uncertainty budget for DASY5 valid for 3G communication signals and frequency range 3 - 6 GHz.
Probe calibration error reflects uncertainty of the EX3D probe. For specific tests and configurations, the uncertainty
could be considerable smaller.
© CTC advanced GmbH
Page 20 of 54
Test report no.: 1-2856/16-01-03
Relative DASY5 Uncertainty Budget for SAR Tests
According to IEEE 1528/2011 and IEC62209-1/2011 (3-6GHz range)
ci
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor
Error Description
Value
Distribution
(1g) (10g) ± %, (1g) ± %, (10g) veff
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Modulation Response
Readout electronics
Response time
Integration time
RF ambient noise
RF ambient reflections
Probe positioner
Probe positioning
Max. SAR evaluation
Test Sample Related
Device positioning
Device holder uncertainty
Power drift
Phantom and Set-up
Phantom uncertainty
SAR correction
Liquid conductivity (meas.)
Liquid permittivity (meas.)
Temp. Unc. - Conductivity
Temp. Unc. - Permittivity
Combined Uncertainty
Expanded Std.
Uncertainty
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
4.7
9.6
2.0
4.7
1.0
2.4
0.3
0.8
2.6
3.0
3.0
0.8
6.7
4.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
± 2.9 %
± 3.6 %
± 5.0 %
Normal
Normal
Rectangular
√3
±
±
±
±
±
±
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
√
6.6
1.9
5.0
5.0
3.4
0.4
√
√
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
3.9
1.2
2.7
0.6
1.4
0.3
0.5
1.5
1.7
1.7
0.5
3.9
2.3
±
±
±
2.9 %
3.6 %
2.9 %
±
±
±
2.9 %
3.6 %
2.9 %
0.78
0.26
0.78
0.23
0.84
0.71
0.26
0.71
0.26
± 3.8
± 1.1
± 2.3
± 0.8
± 1.5
± 0.1
± 12.4
± 24.9 %
± 3.8
± 0.9
± 2.0
± 0.8
± 1.4
± 0.1
± 12.4
Page 21 of 54
± 24.8 %
Table 8: Measurement uncertainties
Worst-Case uncertainty budget for DASY5 assessed according to IEEE 1528/2011
and IEC 62209-1/2011 draft standards. The budget is valid for the frequency range 3GHz -6GHz and
represents a worst-case analysis. For specific tests and configurations, the uncertainty could be
considerable smaller.
© CTC advanced GmbH
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
145
∞
∞
∞
∞
∞
∞
∞
330
Test report no.: 1-2856/16-01-03
6.1.12 Measurement uncertainty evaluation for System Check
Uncertainty of a System Performance Check with DASY5 System
for the 0.3 - 3 GHz range
Source of
uncertainty
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Readout electronics
Response time
Integration time
RF ambient conditions
Probe positioner
Probe positioning
Max. SAR evaluation
Test Sample Related
Dev. of experimental dipole
Source to liquid distance
Power drift
Phantom and Set-up
Phantom uncertainty
SAR correction
Liquid conductivity (meas.)
Liquid permittivity (meas.)
Temp. unc. - Conductivity
Temp. unc. - Permittivity
Combined Uncertainty
Expanded Std.
Uncertainty
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor ci
Value
Distribution
±
%,
(1g)
±
%,
(10g)
(1g) (10g)
veff
±
±
±
±
±
±
±
±
±
±
±
±
±
6.0
4.7
0.0
1.0
4.7
1.0
0.3
0.0
0.0
3.0
0.4
2.9
1.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
± 0.0 % Rectangular
± 2.0 % Rectangular
± 3.4 % Rectangular
√3
√3
√3
±
±
±
±
±
±
√3
√3
√3
√3
0.78
0.26
0.78
0.23
0.84
0.71
0.26
0.71
0.26
4.0
1.9
5.0
5.0
1.7
0.3
Rectangular
Rectangular
Normal
Normal
Rectangular
Rectangular
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
± 0.0 % ±
± 1.2 % ±
± 2.0 % ±
0.0 %
1.2 %
2.0 %
∞
∞
∞
±
±
±
±
±
±
±
2.3
0.9
3.6
1.3
0.7
0.0
8.9
±
±
±
±
±
±
±
±
±
±
±
±
±
2.3
1.1
3.9
1.3
0.8
0.0
9.1
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
±
6.0
1.9
0.0
0.6
2.7
0.6
0.3
0.0
0.0
1.7
0.2
1.7
0.6
± 18.2 % ± 17.9 %
Table 9: Measurement uncertainties of the System Check with DASY5 (0.3-3GHz)
© CTC advanced GmbH
6.0
1.9
0.0
0.6
2.7
0.6
0.3
0.0
0.0
1.7
0.2
1.7
0.6
Page 22 of 54
∞
∞
∞
∞
∞
∞
330
Test report no.: 1-2856/16-01-03
Uncertainty of a System Performance Check with DASY5 System
for the 3 - 6 GHz range
Source of
uncertainty
Measurement System
Probe calibration
Axial isotropy
Hemispherical isotropy
Boundary effects
Probe linearity
System detection limits
Readout electronics
Response time
Integration time
RF ambient conditions
Probe positioner
Probe positioning
Max. SAR evaluation
Test Sample Related
Dev. of experimental dipole
Source to liquid distance
Power drift
Phantom and Set-up
Phantom uncertainty
SAR correction
Liquid conductivity (meas.)
Liquid permittivity (meas.)
Temp. unc. - Conductivity
Temp. unc. - Permittivity
Combined Uncertainty
Expanded Std.
Uncertainty
ci
Standard Uncertainty v 2 or
Uncertainty Probability Divisor ci
Value
Distribution
±
%,
(1g)
±
%,
(10g)
(1g) (10g)
veff
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
4.7
0.0
1.0
4.7
1.0
0.3
0.0
0.0
3.0
0.8
6.7
1.0
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Normal
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
Rectangular
√
√
√
√
√
√
√
√
√
√
√
0.7
0.7
0.7
0.7
± 0.0 % Rectangular
± 2.0 % Rectangular
± 3.4 % Rectangular
√3
√3
√3
±
±
±
±
±
±
√3
√3
√3
√3
0.78
0.26
0.78
0.23
0.84
0.71
0.26
0.71
0.26
4.0
1.9
5.0
5.0
1.7
0.3
Rectangular
Rectangular
Normal
Normal
Rectangular
Rectangular
±
±
±
±
±
±
±
±
±
±
±
±
±
6.6
1.9
0.0
0.6
2.7
0.6
0.3
0.0
0.0
1.7
0.5
3.9
0.6
±
±
±
±
±
±
±
±
±
±
±
±
±
± 0.0 % ±
± 1.2 % ±
± 2.0 % ±
±
±
±
±
±
±
±
2.3
1.1
3.9
1.3
0.8
0.0
10.1
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
∞
0.0 %
1.2 %
2.0 %
∞
∞
∞
± 2.3
± 0.9
± 3.6
± 1.3
± 0.7
± 0.0
± 10.0
± 20.2 % ± 19.9 %
Table 10: Measurement uncertainties of the System Check with DASY5 (3-6GHz)
Note: Worst case probe calibration uncertainty has been applied for all probes used during the
measurements.
© CTC advanced GmbH
6.6
1.9
0.0
0.6
2.7
0.6
0.3
0.0
0.0
1.7
0.5
3.9
0.6
Page 23 of 54
∞
∞
∞
∞
∞
∞
330
Test report no.: 1-2856/16-01-03
6.1.13 System check
The system check is performed for verifying the accuracy of the complete measurement system and
performance of the software. The system check is performed with tissue equivalent material according to
IEEE 1528. The following table shows system check results for all frequency bands and tissue liquids used
during the tests (plot(s) see annex A).
System
validation
Kit
Frequency
System performence check (1000 mW)
Target
Target
Measured
SAR1g
Measured
SAR1g
SAR10g
SAR1g
SAR10g
dev.
/mW/g
/mW/g
(+/- 10%) (+/- 10%)
mW/g
mW/g
D2450V2
2450 MHz
51.20
S/N: 710
body
D2450V2
2450 MHz
51.20
S/N: 710
body
D5GHzV2 5200 MHz
74.20
S/N: 1055
body
D5GHzV2 5500 MHz
77.90
S/N: 1055
body
D5GHzV2 5800 MHz
73.30
S/N: 1055
body
D5GHzV2 5200 MHz
74.20
S/N: 1055
body
D5GHzV2 5500 MHz
77.90
S/N: 1055
body
D5GHzV2 5800 MHz
73.30
S/N: 1055
body
Table 11: Results system check
© CTC advanced GmbH
SAR10g
dev.
Measured
date
23.90
54.00
5.5%
24.50
2.5%
2013-10-22
23.90
54.10
5.7%
24.30
1.7%
2013-10-30
20.80
73.30
-1.2%
20.50
-1.4%
2013-10-24
21.70
79.30
1.8%
21.90
0.9%
2013-10-24
20.20
75.70
3.3%
21.00
4.0%
2013-10-24
20.80
72.70
-2.0%
20.20
-2.9%
2013-10-29
21.70
79.40
1.9%
22.10
1.8%
2013-10-29
20.20
73.60
0.4%
20.30
0.5%
2013-10-29
Page 24 of 54
Test report no.: 1-2856/16-01-03
6.1.14 System check procedure
The system check is performed by using a validation dipole which is positioned parallel to the planar part of
the SAM phantom at the reference point. The distance of the dipole to the SAM phantom is determined by a
plexiglass spacer. The dipole is connected to the signal source consisting of signal generator and amplifier
via a directional coupler, N-connector cable and adaption to SMA. It is fed with a power of 1000 mW for
frequencies below 2 GHz or 100 mW for frequencies above 2 GHz. To adjust this power a power meter is
used. The power sensor is connected to the cable before the system check to measure the power at this
point and do adjustments at the signal generator. At the outputs of the directional coupler both return loss as
well as forward power are controlled during the validation to make sure that emitted power at the dipole is
kept constant. This can also be checked by the power drift measurement after the test (result on plot).
System check results have to be equal or near the values determined during dipole calibration (target SAR in
table above) with the relevant liquids and test system.
© CTC advanced GmbH
Page 25 of 54
Test report no.: 1-2856/16-01-03
6.1.15 System validation
The system validation is performed in a similar way as a system check. It needs to be performed once a
SAR measurement system has been established and allows an evaluation of the system accuracy with all
components used together with the specified system. It has to be repeated at least once a year or when new
system components are used (DAE, probe, phantom, dipole, liquid type).
In addition to the procedure used during system check a system validation also includes checks of probe
isotropy, probe modulation factor and RF signal.
The following table lists the system validations relevant for this test report:
Frequency/
MHz
Liquid
type
2450
Body
5200
Body
5300
Body
5500
Body
5600
Body
5800
Body
© CTC advanced GmbH
Probe /
SN
ET3DV6/
1558
EX3DV4/
3944
EX3DV4/
3944
EX3DV4/
3944
EX3DV4/
3944
EX3DV4/
3944
DAE
type /
SN
DAE3 /
477
DAE3 /
477
DAE3 /
477
DAE3 /
477
DAE3 /
477
DAE3 /
477
Dipole
type
/ SN
D2450V2 /
710
D5GHzV2
/ 1055
D5GHzV2
/ 1055
D5GHzV2
/ 1055
D5GHzV2
/ 1055
D5GHzV2
/ 1055
Page 26 of 54
DASY
software
Date
V52.8
2013-09
V52.8
2013-09
V52.8
2013-09
V52.8
2013-09
V52.8
2013-09
V52.8
2013-09
Test report no.: 1-2856/16-01-03
Detailed Test Results
7.1 Conducted power measurements
7.1.1 Conducted power measurements WLAN 2.4 GHz
Channel / frequency
modulation
bit rate
1 / 2412 MHz
6 / 2437 MHz
11 / 2462 MHz
1 / 2412 MHz
6 / 2437 MHz
11 / 2462 MHz
1 / 2412 MHz
6 / 2437 MHz
11 / 2462 MHz
CCK
CCK
CCK
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
1 MBit/s
1 MBit/s
1 MBit/s
6 MBit/s
6 MBit/s
6 MBit/s
6.5 MBit/s
6.5 MBit/s
6.5 MBit/s
time based avg. power
13.3dBm
13.4dBm
13.7dBm
13.2dBm
13.3dBm
13.3dBm
8.6dBm
13.5dBm
9dBm
Table 12: Test results conducted power measurement WLAN 2.4 GHz
7.1.2 Conducted power measurements WLAN 5 GHz
Conducted time based avg. power measurement WLAN 5 GHz (dBm)
Channel
36
40
44
48
52
56
60
64
100
104
108
112
116
120
124
128
132
136
140
149
153
157
161
165
Frequency
(MHz)
5180
5200
5220
5240
5260
5280
5300
5320
5500
5520
5540
5560
5580
5600
5620
5640
5660
5680
5700
5745
5765
5785
5805
5825
modulation
6 MBit/s
6.5 MBit/s
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
OFDM
15.8
15.6
15.0
14.8
15.1
15.4
15.5
15.3
15.3
15.5
15.4
15.7
15.5
15.1
15.3
15.5
15.6
15.6
15.6
14.3
14.8
14.5
14.8
14.7
14.4
14.7
14.0
13.9
14.1
14.0
13.7
14.9
15.2
15.7
15.4
15.1
15.1
15.3
15.8
15.7
15.4
15.6
15.7
14.2
14.8
14.7
14.7
14.6
Table 13: Test results conducted power measurement WLAN 5 GHz
© CTC advanced GmbH
Page 27 of 54
13.5 MBit/s
11.2
15.5
15.1
13.3
15.2
15.6
15.7
15.7
15.4
--14.2
14.7
---
Test report no.: 1-2856/16-01-03
7.1.3 Standalone SAR Test Exclusion
Standalone SAR test exclusion considerations for body position
threshold1-g
Pavg*
freq. distance Pavg*
SAR test exclusion
comparison
(MHz)
(mm)
(dBm) (mW)
value
WLAN 2450
2450
10
15.0
31.6
4.9
no
WLAN 5.2 GHz
5200
10
16.0
39.8
9.1
no
WLAN 5.3 GHz
5300
10
16.0
39.8
9.2
no
WLAN 5.6 GHz
5600
10
16.0
39.8
9.4
no
WLAN 5.8 GHz
5800
10
15.0
31.6
7.6
no
7.1
5.1
MBAN 1 ID248
2400
10
0.8
yes
3.9
2.5
MBAN 2 ID251
2400
10
0.4
yes
5.4
3.5
SRR1
2450
10
0.5
yes
3.9
2.5
SRR2
2450
10
0.4
yes
Table 14: Standalone SAR test exclusion considerations in body worn position
Pavg* - maximum possible output power declared by manufacturer
Communication
system
The 1-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤ 50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·
[√f(GHz)] ≤ 3.0 for 1-g SAR, where:
 f(GHz) is the RF channel transmit frequency in GHz
 Power and distance are rounded to the nearest mW and mm before calculation
 The result is rounded to one decimal place for comparison
 When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine
SAR test exclusion
© CTC advanced GmbH
Page 28 of 54
Test report no.: 1-2856/16-01-03
7.1.4 SAR measurement positions
mode
WLAN 2450
WLAN 5.2 GHz
WLAN 5.3 GHz
WLAN 5.6 GHz
WLAN 5.8 GHz
front
yes
yes
yes
yes
yes
SAR measurement positions
rear
left edge
right edge
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
yes
top edge
no
no
no
no
no
bottom edge
yes
yes
yes
yes
yes
top
left
right
bottom
Antenna dimensions and separation distances
Note:
The min. 100 mm distance of the WLAN antenna to top side SAR test exclusion for adjacent edge is possible
according to KDB 447498 D01v05 chapter 4.3.1 2) or Appendix A/B.
Adjacent edge SAR test exclusion considerations
Communication
system
WLAN 2450
WLAN 5.2 GHz
WLAN 5.3 GHz
WLAN 5.6 GHz
WLAN 5.8 GHz
freq.
(MHz)
Pavg*
(dBm)
2450
5200
5300
5600
5800
15.0
16.0
16.0
16.0
15.0
exclusion
Pavg* distance
threshold1g
(mm)
(mW)
(mW)
31.6
100.0
191.7
39.8
100.0
131.6
39.8
100.0
130.3
39.8
100.0
126.8
31.6
100.0
124.6
Table 15: Adjacent edge SAR test exclusion considerations
© CTC advanced GmbH
Page 29 of 54
SAR test exclusion
yes
yes
yes
yes
yes
Test report no.: 1-2856/16-01-03
7.2 SAR test results
7.2.1 Results overview
measured / extrapolated SAR numbers - WLAN 2450 MHz
Ch.
Freq.
Test
distance
(MHz) condition
(mm)
Position
11
11
11
11
11
2412
2437
2462
2462
2462
2462
2462
front
front
front
rear
bottom
left
right
1Mbit/s
1Mbit/s
1Mbit/s
1Mbit/s
1Mbit/s
1Mbit/s
1Mbit/s
10
10
10
cond. Pmax (dBm)
SAR1g results(W/kg)
declared* measured measured extrapolated
15.0
15.0
15.0
15.0
15.0
15.0
15.0
13.3
13.4
13.7
13.7
13.7
13.7
13.7
0.193
0.177
0.139
0.101
0.551
0.044
0.089
0.285
0.256
0.188
0.136
0.743
0.059
0.120
liquid
(°C)
21.6
21.6
21.6
21.6
21.6
21.6
21.6
Table 16: Test results SAR WLAN 2450 MHz (see max. SAR plots Annex B.1: WLAN 2450 MHz)
* - maximum possible output power declared by manufacturer
measured / extrapolated SAR numbers - Body worn - WLAN 5 GHz
Ch.
Freq.
(MHz)
Test
condition
distance
(mm)
Position
36
60
112
161
36
60
112
161
36
60
112
161
36
60
112
161
36
60
112
161
5180
5300
5560
5805
5180
5300
5560
5805
5180
5300
5560
5805
5180
5300
5560
5805
5180
5300
5560
5805
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
6Mbit/s
10
10
10
10
front
front
front
front
rear
rear
rear
rear
bottom
bottom
bottom
bottom
left
left
left
left
right
right
right
right
cond. Pmax (dBm)
SAR1g results(W/kg)
declared** measured measured extrapolated
16.0
16.0
16.0
15.0
16.0
16.0
16.0
15.0
16.0
16.0
16.0
15.0
16.0
16.0
16.0
15.0
16.0
16.0
16.0
15.0
15.8
15.5
15.7
14.8
15.8
15.5
15.7
14.8
15.8
15.5
15.7
14.8
15.8
15.5
15.7
14.8
15.8
15.5
15.7
14.8
0.214
0.132
0.224
0.320
0.035
0.034
0.023
0.036
0.288
0.213
0.201
0.131
0.070
0.081
0.102
0.073
0.099
0.080
0.044
0.035
0.224
0.148
0.240
0.335
0.037
0.038
0.025
0.038
0.302
0.239
0.215
0.137
0.073
0.091
0.109
0.076
0.104
0.090
0.047
0.037
liquid
(°C)
21.2
21.2
21.2
21.2
21.2
21.6
21.6
21.6
21.2
21.6
21.6
21.6
21.2
21.6
21.6
21.6
21.2
21.6
21.6
21.6
Table 17: Test results body worn SAR WLAN 5 GHz (see max. SAR plots Annex B.2: WLAN 5GHz)
** - maximum possible output power declared by manufacturer
© CTC advanced GmbH
Page 30 of 54
Test report no.: 1-2856/16-01-03
7.2.2 General description of test procedures







The DUT is tested using the test software to set test channels and maximum output power to the
DUT, as well as for measuring the conducted peak power.
Test positions as described in the tables above are in accordance with the specified test standard.
WLAN was tested in 802.11a/b mode with 1 MBit/s and 6 MBit/s. According to KDB 248227 the
SAR testing for 802.11g/n is not required since the maximum power of 802.11g/n is less ¼ dB higher
than maximum power of 802.11a/b.
Required WLAN test channels were selected according to KDB 248227
According to IEEE 1528 the SAR test shall be performed at middle channel. Testing of top and
bottom channel is optional.
According to KDB 447498 D01 testing of other required channels within the operating mode of a
frequency band is not required when the reported 1-g or 10-g SAR for the mid-band or highest
output power channel is:
 ≤ 0.8 W/kg or 2.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≤ 100 MHz
 ≤ 0.6 W/kg or 1.5 W/kg, for 1-g or 10-g respectively, when the transmission band is between 100
MHz and 200 MHz
 ≤ 0.4 W/kg or 1.0 W/kg, for 1-g or 10-g respectively, when the transmission band is ≥ 200 MHz
The DUT is tested using the test software to set test channels and maximum output power to the
DUT, as well as for measuring the conducted peak power. The followings power settings declared by
the manufacturer were used by the control software. All measurements were performed with the
specified settings.
Band
2.400 – 2.483 GHz
5.180 GHz
5.300 GHz
5.560 GHz
5.805 GHz
© CTC advanced GmbH
Power setting
14 dBm
14 dBm
12 dBm
12 dBm
11 dBm
Page 31 of 54
Test report no.: 1-2856/16-01-03
7.2.3 Multiple Transmitter Information
The following tables list information which is relevant for the decision if a simultaneous transmit evaluation is
necessary according to FCC KDB 447498D01 General RF Exposure Guidance v05.
reported SAR WLAN 2.4GHz / 5GHz, MBAN and SRR, ΣSAR1g evaluation
Frequency band
Position
WLAN 2.4GHz
WLAN 5GHz
front
front
Frequency band
Position
SARmax with 10 mm distance / W/kg
WLAN
0.285
0.335
MBAN
0.106
0.106
SRR
0.072
0.072
SARmax with 0 mm distance / W/kg
WLAN
MBAN
WLAN 2.4GHz
bottom
0.743
0.212
WLAN 5GHz
bottom
0.302
0.212
Table 18: SARmax WLAN and SRR 2.4GHz, ΣSAR evaluation.
SRR
0.145
0.145
ΣSAR1g
<1.6W/kg
0.357
0.407
ΣSAR1g
<1.6W/kg
0.888
0.447
Minimum antenna separation distance between MAIN WLAN antenna and SRR antenna –110 mm
Estimated stand alone SAR1g
Communication
system
freq. (GHz)
distance
(mm)
Pavg (dBm)
Pavg (mW)
MBAN 1 ID248
MBAN 2 ID251
SRR1
SRR2
MBAN 1 ID248
MBAN 2 ID251
SRR1
SRR2
2.4
2.4
2.45
2.45
2.4
2.4
2.45
2.45
10
10
10
10
7.1
5.5
5.4
3.9
7.1
5.5
5.4
3.9
5.1
3.5
3.5
2.5
5.1
3.5
3.5
2.5
estimated1-g
(W/kg)
0.212
0.147
0.145
0.102
0.106
0.073
0.072
0.051
Table 19: Estimated stand alone SARmax for SRR and MBAN body
When standalone SAR test exclusion applies to an antenna that transmits simultaneously with other
antennas, the standalone SAR must be estimated according to following to determine simultaneous
transmission SAR test exclusion:
(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)]·[√f(GHz)/x]
W/kg for test separation distances ≤ 50 mm;
where x = 7.5 for 1-g SAR.
When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test
exclusion
Conclusion:
ΣSAR < 1.6 W/kg therefore simultaneous transmissions SAR measurement with the enlarged zoom scan
measurement and volume scan post-processing procedures is not required.
© CTC advanced GmbH
Page 32 of 54
Test report no.: 1-2856/16-01-03
Test equipment and ancillaries used for tests
To simplify the identification of the test equipment and/or ancillaries which were used, the reporting of the
relevant test cases only refer to the test item number as specified in the table below.
Frequency
Equipment
Type
Manufacturer
Serial No.
Last Calibration
(months)
Dosimetric E-Field Probe
ET3DV6 Schmid & Partner 1558
August 22, 2013 12
Engineering AG
Dosimetric E-Field Probe
EX3DV4 Schmid & Partner 3944
August 02, 2013 12
Engineering AG
2450 MHz System Validation D2450V2 Schmid & Partner 710
August 13, 2012 24
Dipole
Engineering AG
5 GHz System Validation
D5GHzV Schmid & Partner 1055
August 19, 2013 24
Dipole
Engineering AG
Data acquisition electronics DAE3V1 Schmid & Partner 477
May 13, 2013
12
Engineering AG
Software
DASY52 Schmid & Partner --N/A
-52.8.7
Engineering AG
Phantom
SAM
Schmid & Partner --N/A
-Engineering AG
Network Analyser
8753ES Hewlett Packard)* US39174436 February 24,
24
300 kHz to 6 GHz
2012
Dielectric Probe Kit
85070C Hewlett Packard
US99360146 N/A
12
Signal Generator
8671B
Hewlett Packard
2823A00656 January 15, 2013 24
Amplifier
25S1G4 Amplifier
20452
N/A
-(25 Watt) Reasearch
Power Meter
NRP
Rohde & Schwarz 101367
January 15, 2013 24
Power Meter Sensor
NRP Z22 Rohde & Schwarz 100227
January 14, 2013 12
Power Meter Sensor
NRP Z22 Rohde & Schwarz 100234
January 14, 2013 12
Directional Coupler
778D
Hewlett Packard
19171
January 14, 2013 12
)* : Network analyzer probe calibration against air, distilled water and a shorting block performed before measuring liquid
parameters.
Observations
No observations exceeding those reported with the single test cases have been made.
© CTC advanced GmbH
Page 33 of 54
Test report no.: 1-2856/16-01-03
Annex A: System performance check
Date/Time: 22.10.2013 10:05:13
SystemPerformanceCheck-D2450 body 2013-10-22
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 710
Communication System: UID 0, CW (0); Communication System Band: D2450 (2450.0 MHz); Frequency:
2450 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 2450 MHz; σ = 1.973 S/m; εr = 51.281; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: ET3DV6 - SN1558; ConvF(3.81, 3.81, 3.81); Calibrated: 22.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection), z = 2.7, 32.7
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL2450/d=10mm, Pin=100 mW, dist=4.0mm/Area Scan (51x51x1):
Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 7.60 W/kg
MSL2450/d=10mm, Pin=100 mW, dist=4.0mm/Zoom Scan/Cube 0: Measurement
grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 56.505 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 13.2 W/kg
SAR(1 g) = 5.4 W/kg; SAR(10 g) = 2.45 W/kg
Maximum value of SAR (measured) = 5.95 W/kg
0 dB = 5.95 W/kg = 7.75 dBW/kg
Additional information:
ambient temperature: 22.0°C; liquid temperature: 21.6°C
© CTC advanced GmbH
Page 34 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 30.10.2013 15:48:28
SystemPerformanceCheck-D2450 head 2013-10-30
DUT: Dipole 2450 MHz; Type: D2450V2; Serial: 710
Communication System: UID 0, CW (0); Communication System Band: D2450 (2450.0 MHz); Frequency:
2450 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 2450 MHz; σ = 1.973 S/m; εr = 51.281; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: ET3DV6 - SN1558; ConvF(3.81, 3.81, 3.81); Calibrated: 22.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection), z = 2.7, 32.7
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL2450/d=10mm, Pin=100 mW, dist=4.0mm/Area Scan (51x51x1):
Interpolated grid: dx=1.500 mm, dy=1.500 mm
Maximum value of SAR (interpolated) = 7.63 W/kg
MSL2450/d=10mm, Pin=100 mW, dist=4.0mm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 56.341 V/m; Power Drift = -0.01 dB
Peak SAR (extrapolated) = 13.2 W/kg
SAR(1 g) = 5.41 W/kg; SAR(10 g) = 2.43 W/kg
Maximum value of SAR (measured) = 6.00 W/kg
0 dB = 6.00 W/kg = 7.78 dBW/kg
Additional information:
ambient temperature: 22.2°C; liquid temperature: 21.8°C
© CTC advanced GmbH
Page 35 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 24.10.2013 09:20:04
SystemPerformanceCheck-D5GHz-body 2013-10-24
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5200 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5200 MHz; σ = 5.34 S/m; εr = 48.02; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.47, 4.47, 4.47); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.2GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 9.87 W/kg
MSL/d=10mm, Pin=100mW 5.2GHz/Zoom Scan (8x8x8) (8x8x8)/Cube 0:
Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 41.083 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 28.8 W/kg
SAR(1 g) = 7.33 W/kg; SAR(10 g) = 2.05 W/kg
Maximum value of SAR (measured) = 14.4 W/kg
0 dB = 14.4 W/kg = 11.58 dBW/kg
Additional information:
ambient temperature: 22.0°C; liquid temperature: 21.6°C
© CTC advanced GmbH
Page 36 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 24.10.2013 10:44:23
SystemPerformanceCheck-D5GHz-body 2013-10-24
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5500 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5500 MHz; σ = 5.71 S/m; εr = 47.27; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.09, 4.09, 4.09); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.5GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 10.1 W/kg
MSL/d=10mm, Pin=100mW 5.5GHz/Zoom Scan (8x8x8) (8x8x8)/Cube 0:
Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 40.919 V/m; Power Drift = -0.07 dB
Peak SAR (extrapolated) = 32.8 W/kg
SAR(1 g) = 7.93 W/kg; SAR(10 g) = 2.19 W/kg
Maximum value of SAR (measured) = 16.1 W/kg
0 dB = 16.1 W/kg = 12.07 dBW/kg
Additional information:
ambient temperature: 22.0°C; liquid temperature: 21.6°C
© CTC advanced GmbH
Page 37 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 24.10.2013 11:07:06
SystemPerformanceCheck-D5GHz-body 2013-10-24
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5800 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5800 MHz; σ = 6.1 S/m; εr = 46.69; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.2, 4.2, 4.2); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.8GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 9.41 W/kg
MSL/d=10mm, Pin=100mW 5.8GHz/Zoom Scan (8x8x8) (8x8x8)/Cube 0:
Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 38.160 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 32.9 W/kg
SAR(1 g) = 7.57 W/kg; SAR(10 g) = 2.1 W/kg
Maximum value of SAR (measured) = 15.2 W/kg
0 dB = 15.2 W/kg = 11.82 dBW/kg
Additional information:
ambient temperature: 22.0°C; liquid temperature: 21.6°C
© CTC advanced GmbH
Page 38 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 7:54:42
SystemPerformanceCheck-D5GHz-body 2013-10-29
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5200 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5200 MHz; σ = 5.34 S/m; εr = 48.02; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.47, 4.47, 4.47); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.2GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 8.83 W/kg
MSL/d=10mm, Pin=100mW 5.2GHz/Zoom Scan (8x8x8)/Cube 0: Measurement
grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 40.909 V/m; Power Drift = -0.05 dB
Peak SAR (extrapolated) = 28.6 W/kg
SAR(1 g) = 7.27 W/kg; SAR(10 g) = 2.02 W/kg
Maximum value of SAR (measured) = 14.4 W/kg
0 dB = 14.4 W/kg = 11.58 dBW/kg
Additional information:
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 39 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 8:26:37
SystemPerformanceCheck-D5GHz-body 2013-10-29
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5500 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5500 MHz; σ = 5.71 S/m; εr = 47.27; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.09, 4.09, 4.09); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.5GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 9.40 W/kg
MSL/d=10mm, Pin=100mW 5.5GHz/Zoom Scan (8x8x8)/Cube 0: Measurement
grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 41.072 V/m; Power Drift = -0.06 dB
Peak SAR (extrapolated) = 32.4 W/kg
SAR(1 g) = 7.94 W/kg; SAR(10 g) = 2.21 W/kg
Maximum value of SAR (measured) = 15.8 W/kg
0 dB = 15.8 W/kg = 11.99 dBW/kg
Additional information:
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 40 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 8:57:59
SystemPerformanceCheck-D5GHz-body 2013-10-29
DUT: Dipole 5 GHz; Type: D5GHzV2; Serial: 1055
Communication System: UID 0, CW; Communication System Band: 5 GHz; Frequency: 5800 MHz;
Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5800 MHz; σ = 6.1 S/m; εr = 46.69; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.2, 4.2, 4.2); Calibrated: 02.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 22.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL/d=10mm, Pin=100mW 5.8GHz/Area Scan (91x91x1): Interpolated grid:
dx=1.000 mm, dy=1.000 mm
Maximum value of SAR (interpolated) = 8.70 W/kg
MSL/d=10mm, Pin=100mW 5.8GHz/Zoom Scan (8x8x8)/Cube 0: Measurement
grid: dx=4.3mm, dy=4.3mm, dz=3mm
Reference Value = 37.175 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 32.5 W/kg
SAR(1 g) = 7.36 W/kg; SAR(10 g) = 2.03 W/kg
Maximum value of SAR (measured) = 15.3 W/kg
0 dB = 15.3 W/kg = 11.85 dBW/kg
Additional information:
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 41 of 54
Test report no.: 1-2856/16-01-03
Annex B: DASY5 measurement results
SAR plots for the highest measured SAR in each exposure configuration, wireless mode and frequency
band combination according to FCC KDB 865664 D02
Annex B.1: WLAN 2450 MHz
Date/Time: 30.10.2013 14:27:15
FCC_EN62209-2 WLAN2450 body worn - 10mm
DUT: Philips; Type: CL Transmitter; Serial: D932Y0201
Communication System: UID 0, WLAN 2450 (0); Communication System Band: 2.4 GHz; Frequency: 2412
MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 2412 MHz; σ = 1.933 S/m; εr = 51.351; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: ET3DV6 - SN1558; ConvF(3.81, 3.81, 3.81); Calibrated: 22.08.2013;
- Sensor-Surface: 4mm (Mechanical Surface Detection), z = 2.7, 32.7
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL2450/Front Low 10mm/Area Scan (91x161x1): Interpolated grid: dx=1.000 mm,
dy=1.000 mm
Maximum value of SAR (interpolated) = 0.205 W/kg
MSL2450/Front Low 10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm,
dy=5mm, dz=5mm
Reference Value = 9.709 V/m; Power Drift = 0.14 dB
Peak SAR (extrapolated) = 0.488 W/kg
SAR(1 g) = 0.193 W/kg; SAR(10 g) = 0.085 W/kg
Maximum value of SAR (measured) = 0.211 W/kg
0 dB = 0.211 W/kg = -6.76 dBW/kg
Additional information:
position or distance of DUT to SAM: 10mm
ambient temperature: 22.2°C; liquid temperature: 21.8°C
© CTC advanced GmbH
Page 42 of 54
Test report no.: 1-2856/16-01-03
Annex B.2: WLAN 5GHz
Date/Time: 29.10.2013 10:25:06
FCC_EN62209-2 WLAN 5GHz body worn
DUT: Philips; Type: CL Transmitter; Serial: D932Y0201
Communication System: UID 0, WLAN 5GHz (0); Communication System Band: 5 GHz Band; Frequency:
5180 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5180 MHz; σ = 5.34 S/m; εr = 48.02; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.47, 4.47, 4.47); Calibrated: 02.08.2013;
- Sensor-Surface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL-5/Front Ch36 10mm/Area Scan (91x161x1): Interpolated grid: dx=1.000 mm,
dy=1.000 mm
Maximum value of SAR (interpolated) = 0.372 W/kg
MSL-5/Front Ch36 10mm/Zoom Scan (8x8x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 8.644 V/m; Power Drift = 0.06 dB
Peak SAR (extrapolated) = 0.713 W/kg
SAR(1 g) = 0.214 W/kg; SAR(10 g) = 0.084 W/kg
Maximum value of SAR (measured) = 0.368 W/kg
0 dB = 0.368 W/kg = -4.34 dBW/kg
Additional information:
position or distance of DUT to SAM: 10mm
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 43 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 10:59:34
FCC_EN62209-2 WLAN 5GHz body worn
DUT: Philips; Type: CL Transmitter; Serial: D932Y0201
Communication System: UID 0, WLAN 5GHz (0); Communication System Band: 5 GHz Band; Frequency:
5300 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5300 MHz; σ = 5.46 S/m; εr = 47.79; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.3, 4.3, 4.3); Calibrated: 02.08.2013;
- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL-5/Front Ch60 10mm/Area Scan (91x161x1): Interpolated grid: dx=1.000 mm,
dy=1.000 mm
Maximum value of SAR (interpolated) = 0.240 W/kg
MSL-5/Front Ch60 10mm/Zoom Scan (8x8x12)/Cube 0: Measurement grid: dx=4mm,
dy=4mm, dz=2mm
Reference Value = 7.057 V/m; Power Drift = -0.03 dB
Peak SAR (extrapolated) = 0.474 W/kg
SAR(1 g) = 0.132 W/kg; SAR(10 g) = 0.052 W/kg
Maximum value of SAR (measured) = 0.241 W/kg
0 dB = 0.241 W/kg = -6.18 dBW/kg
Additional information:
position or distance of DUT to SAM: 10mm
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 44 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 11:34:35
FCC_EN62209-2 WLAN 5GHz body worn
DUT: Philips; Type: CL Transmitter; Serial: D932Y0201
Communication System: UID 0, WLAN 5GHz (0); Communication System Band: 5 GHz Band; Frequency:
5560 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5560 MHz; σ = 5.78 S/m; εr = 47.17; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.33, 4.33, 4.33); Calibrated: 02.08.2013;
- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL-5/Front Ch112 10mm/Area Scan (91x161x1): Interpolated grid: dx=1.000 mm,
dy=1.000 mm
Maximum value of SAR (interpolated) = 0.424 W/kg
MSL-5/Front Ch112 10mm/Zoom Scan (8x8x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 8.981 V/m; Power Drift = -0.16 dB
Peak SAR (extrapolated) = 0.894 W/kg
SAR(1 g) = 0.224 W/kg; SAR(10 g) = 0.082 W/kg
Maximum value of SAR (measured) = 0.412 W/kg
0 dB = 0.412 W/kg = -3.85 dBW/kg
Additional information:
position or distance of DUT to SAM: 10mm
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 45 of 54
Test report no.: 1-2856/16-01-03
Date/Time: 29.10.2013 12:02:06
FCC_EN62209-2 WLAN 5GHz body worn
DUT: Philips; Type: CL Transmitter; Serial: D932Y0201
Communication System: UID 0, WLAN 5GHz (0); Communication System Band: 5 GHz Band; Frequency:
5805 MHz; Communication System PAR: 0 dB; PMF: 1
Medium parameters used: f = 5805 MHz; σ = 6.12 S/m; εr = 46.68; ρ = 1000 kg/m3
Phantom section: Flat Section
Measurement Standard: DASY5
DASY5 Configuration:
- Probe: EX3DV4 - SN3944; ConvF(4.2, 4.2, 4.2); Calibrated: 02.08.2013;
- Sensor-Surface: 2mm (Mechanical Surface Detection (Locations From Previous Scan Used)), SensorSurface: 2mm (Mechanical Surface Detection), z = 1.0, 23.0
- Electronics: DAE3 Sn477; Calibrated: 13.05.2013
- Phantom: SAM front; Type: QD000P40CC; Serial: TP-1042
- DASY52 52.8.7(1137); SEMCAD X 14.6.10(7164)
MSL-5/Front Ch161 10mm/Area Scan (91x161x1): Interpolated grid: dx=1.000 mm,
dy=1.000 mm
Maximum value of SAR (interpolated) = 0.585 W/kg
MSL-5/Front Ch161 10mm/Zoom Scan (9x8x12)/Cube 0: Measurement grid:
dx=4mm, dy=4mm, dz=2mm
Reference Value = 10.872 V/m; Power Drift = -0.12 dB
Peak SAR (extrapolated) = 1.24 W/kg
SAR(1 g) = 0.320 W/kg; SAR(10 g) = 0.115 W/kg
Maximum value of SAR (measured) = 0.605 W/kg
0 dB = 0.605 W/kg = -2.18 dBW/kg
Additional information:
position or distance of DUT to SAM: 10mm
ambient temperature: 21.5°C; liquid temperature: 21.2°C
© CTC advanced GmbH
Page 46 of 54
Test report no.: 1-2856/16-01-03
Annex B.3: Liquid depth
Photo 1: Liquid depth 2450 MHz body simulating liquid
Photo 2: Liquid depth 5 GHz body simulating liquid
© CTC advanced GmbH
Page 47 of 54
Test report no.: 1-2856/16-01-03
Annex C: Photo documentation
Photo 1: Measurement System DASY 5
Photo 2: DUT - front view
© CTC advanced GmbH
Page 48 of 54
Test report no.: 1-2856/16-01-03
Photo 3: DUT - side view
Photo 4: DUT - rear view
© CTC advanced GmbH
Page 49 of 54
Test report no.: 1-2856/16-01-03
Photo 5: DUT - rear view (label)
Photo 6: DUT - rear view (label)
© CTC advanced GmbH
Page 50 of 54
Test report no.: 1-2856/16-01-03
Photo 7: Test position body worn front side with 10 mm distance
Photo 8: Test position body worn left side with 0 mm distance
© CTC advanced GmbH
Page 51 of 54
Test report no.: 1-2856/16-01-03
Photo 9: Test position body worn right side with 0 mm distance
Photo 10: Test position body worn rear side with 0 mm distance
© CTC advanced GmbH
Page 52 of 54
Test report no.: 1-2856/16-01-03
Photo 11: Test position body worn bottom side with 0 mm distance
© CTC advanced GmbH
Page 53 of 54
Test report no.: 1-2856/16-01-03
Annex D: Calibration parameters
Calibration parameters are described in the additional document:
Appendix to test report no. 1-2856/16-01-03
Calibration data, Phantom certificate
and detail information of the DASY5 System
Annex E:
Version
Document History
Applied Changes
Date of Release
Initial Release
2018-03-07
Annex F:
Further Information
Glossary
DTS
DUT
EUT
FCC
FCC ID
HW
IC
Inv. No.
N/A
SAR
S/N
SW
UNII
Distributed Transmission System
Device under Test
Equipment under Test
Federal Communication Commission
Company Identifier at FCC
Hardware
Industry Canada
Inventory number
not applicable
Specific Absorption Rate
Serial Number
Software
Unlicensed National Information Infrastructure
© CTC advanced GmbH
Page 54 of 54
Download: TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Mirror Download [FCC.gov]TRNSBV1 Range Extender for SRR measurements via WLAN RF Exposure Info SAR test report Philips Medical Systems North America Co.
Document ID3825875
Application IDjw0K7yj6MVVchYSKVXN8Gg==
Document DescriptionSAR Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize201.98kB (2524806 bits)
Date Submitted2018-04-23 00:00:00
Date Available2018-05-09 00:00:00
Creation Date2018-03-12 10:53:13
Producing SoftwareMicrosoft® Word 2013
Document Lastmod2018-03-12 11:58:36
Document TitleSAR test report
Document CreatorMicrosoft® Word 2013
Document Author: scigliano

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : scigliano
Create Date                     : 2018:03:12 10:53:13+01:00
Modify Date                     : 2018:03:12 11:58:36+01:00
Has XFA                         : No
Language                        : de-DE
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Format                          : application/pdf
Creator                         : scigliano
Title                           : SAR test report
Creator Tool                    : Microsoft® Word 2013
Metadata Date                   : 2018:03:12 11:58:36+01:00
Producer                        : Microsoft® Word 2013
Document ID                     : uuid:e431789c-ea71-4d30-90f2-529d4d969268
Instance ID                     : uuid:6152ce0e-ae01-4c86-bcd0-1fe5023c44ce
Page Count                      : 54