FCC ID PXT-201706SC20A

LTE Module

by MobileHelp, LLC

Grantee Code: PXT   Product Code: 201706SC20A
Latest application date: 2019-06-27

FCC ID Device Details

FCC IDPXT-201706SC20A
Mirrorsfcc.id | gov | fccid.ai
Grantee CodePXT
Product Code201706SC20A
Applicant BusinessMobileHelp, LLC 🇺🇸
Related Domains go-m3.com
Equipment ClassLTE Module
Test FirmA Test Lab Techno Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-06-27
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2019-06-27
701.5-713.5 MHzClass II permissive change or modification of presently authorized equipment2019-06-26
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2019-06-26
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172019-06-13
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172019-06-13
701.5-713.5 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172019-06-13
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/20172019-06-13

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-12-24PDF 2.5 MB
Internal photosInternal Photos2019-12-24PDF 3.8 MB
External photoExternal Photos2019-12-24PDF 826 KB
External photoExternal Photos2019-06-13PDF 146.9 KB
Label and locationID Label/Location Info2019-06-27PDF 46.4 KB
Label and locationID Label/Location Info2019-06-13PDF 57.1 KB
DFS Test set-up PhotoTest Setup Photos2019-12-24PDF 576.2 KB
RF Test set-up Photo-LTETest Setup Photos2019-12-24PDF 708.2 KB
RF Test set-up Photo-WIFITest Setup Photos2019-12-24PDF 874 KB
RF Test set-up photoTest Setup Photos2019-12-24PDF 876.7 KB
RF Test set-up photoTest Setup Photos2019-12-24PDF 874 KB
RF Test set-up photo-BLETest Setup Photos2019-12-24PDF 874 KB
RF Test set-up photo-WCDMATest Setup Photos2019-12-24PDF 267.9 KB
SAR Test set-up photoTest Setup Photos2019-12-24PDF 559.8 KB
RF Test ReportTest Report2019-06-27PDF 1.6 MB
RF Test Report-BLETest Report2019-06-27PDF 1.3 MB
RF Test Report-WIFITest Report2019-06-27PDF 2.2 MB
SAR Test ReportRF Exposure Info2019-06-27PDF 5.2 MB
SAR Test reportRF Exposure Info2019-06-27PDF 5.2 MB
DFS Test ReportTest Report2019-06-26PDF 1.4 MB
RF Test ReportTest Report2019-06-26PDF 3.8 MB
RF Test Report-LTETest Report2019-06-26PDF 2 MB
RF Test Report-WCDMATest Report2019-06-26PDF 960 KB
Authorization LetterCover Letter(s)2019-06-27PDF 79.9 KB
Class II Permissive Change Request LetterCover Letter(s)2019-06-27PDF 56.7 KB
LTC/STC LetterCover Letter(s)2019-06-27PDF 116 KB
POACover Letter(s)2019-06-27PDF 44.7 KB
Authorization LetterCover Letter(s)2019-06-13PDF 17.6 KB
Authorization Letter from original applicantCover Letter(s)2019-06-13PDF 93.4 KB
Change ID Request LetterCover Letter(s)2019-06-13PDF 22.1 KB
NII Change ID Declaration letterCover Letter(s)2019-06-13PDF 17 KB
POACover Letter(s)2019-06-13PDF 49.2 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.1 MB
Operational Description-Antenna Metadata onlyOperational DescriptionPDF 1.1 MB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 8.7 KB

Application Information

Application IDzi/A3pmxgs0unq9Vg9qY/w==
Final Action Date2019-06-27
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022105803
Model201706SC20A
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLTE Module
Responsible PartyRobert Flippo, President, rob@go-m3.com , 561 347 6255
Test FirmFly LU, A Test Lab Techno Corp., Fly@atl-lab.com.tw , 88632710188
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/24/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.14 W/kg and 1.20 W/kg respectively. Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
zi/A3pmxgs0unq9Vg9qY/w==2019-06-27Class II permissive change or modification of presently authorized equipment
/IWdbhDBZLyslDAqziDe0w==2019-06-27Class II permissive change or modification of presently authorized equipment
jSFNNrzhYtVzHtittp0hvg==2019-06-26Class II permissive change or modification of presently authorized equipment
ZXxVkP3FN1Ltxs4N8UiQJQ==2019-06-26Class II permissive change or modification of presently authorized equipment
tuVEZ9LTXqh5gz08eId9Rw==2019-06-13Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
EzxvrVf2HsSvHYzHVyFcag==2019-06-13Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
5mqqKU8pciA5K7r9Cnm15w==2019-06-13Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017
3ddMYaaLHlVIdCgGewwMTw==2019-06-13Change in identification of presently authorized equipment. Original FCC ID: XMR201706SC20A Grant Date: 08/14/2017

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
701.5-713.5 MHz0.23070.0052ppm4M49W7D27
704-711 MHz0.28120.0052ppm9M11G7D27
704-711 MHz0.22750.0052ppm9M05W7D27
779.5-784.5 MHz0.34670.0035ppm4M52G7D27
779.5-784.5 MHz0.28640.0035ppm4M50W7D27
782 MHz0.33110.0035ppm9M03G7D27
782 MHz0.28250.0035ppm9M05W7D27
815.5-822.5 MHz0.21980.0045ppm2M73G7D22H, 9
821.5 MHz0.21380.0045ppm13M4G7D22H, 9
821.5 MHz0.1910.0045ppm13M4W7D22H, 9
825.5-847.5 MHz0.21630.0044ppm2M72G7D22H
826.5-846.5 MHz0.21180.0061ppm4M50G7D22H
829-844 MHz0.20460.0044ppm9M03W7D22H
829-844 MHz0.21280.0044ppm9M03G7D22H
831.5-841.5 MHz0.20370.0061ppm13M5G7D22H
831.5-841.5 MHz0.20.0061ppm13M5W7D22H
1712.4-1752.6 MHz0.37670.0144ppm4M15F9W27
1720-1745 MHz0.38110.0028ppm18M4G7D27
1720-1745 MHz0.33570.0028ppm18M6W7D27
1850.2-1909.8 MHz1.75790.0122ppm245KGXW24E
1850.2-1909.8 MHz0.68710.0117ppm248KG7W24E
1850.7-1914.3 MHz0.29380.0013ppm1M09W7D24E
1852.4-1907.6 MHz0.35810.0213ppm4M15F9W24E
1855-1910 MHz0.35560.0013ppm8M99G7D24E
1857.5-1902.5 MHz0.35810.0021ppm13M5G7D24E
1857.5-1902.5 MHz0.30480.0021ppm13M5W7D24E
1860-1905 MHz0.34670.0013ppm18M2G7D24E
1860-1905 MHz0.27670.0013ppm18M3W7D24E
1860-1900 MHz0.34040.0021ppm18M3G7D24E
1860-1900 MHz0.28640.0021ppm18M4W7D24E
2402-2480 MHz0.006500015CCC
2402-2480 MHz0.00215CCC
2412-2462 MHz0.146915CCC
2422-2452 MHz0.162615CCC
2507.5-2562.5 MHz0.44460.0009ppm13M5W7D27
2510-2560 MHz0.51050.0009ppm18M5G7D27
2510-2560 MHz0.43850.0009ppm18M5W7D27
5190-5230 MHz0.019915E38, CC
5260-5320 MHz0.024615E38, CC
5260-5320 MHz0.024615E38, CC, ND
5270-5310 MHz0.020915E38, CC
5270-5310 MHz0.020915E38, CC, ND
5500-5580 MHz0.019615E38, CC
5500-5580 MHz0.019615E38, CC, ND
5510-5550 MHz0.011615E38, CC
5510-5550 MHz0.011615E38, CC, ND
5660-5700 MHz0.020715E38, CC
5660-5700 MHz0.020715E38, CC, ND
5670 MHz0.01715E38, CC
5670 MHz0.01715E38, CC, ND
5745-5825 MHz0.015715E38, CC
5755-5795 MHz0.01215E38, CC

Grants

TCB Grant - Application ZXxVkP3FN1Ltxs4N8UiQJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/26/2019

Application Dated: 06/26/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC ND 15E 5260.0  -  5320.0 0.0246  
38 CC ND 15E 5270.0  -  5310.0 0.0209  
38 CC ND 15E 5500.0  -  5580.0 0.0196  
38 CC ND 15E 5660.0  -  5700.0 0.0207  
38 CC ND 15E 5510.0  -  5550.0 0.0116  
38 CC ND 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.21 W/kg and 1.31 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZXxVkP3FN1Ltxs4N8UiQJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/26/2019

Application Dated: 06/26/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC ND 15E 5260.0  -  5320.0 0.0246  
38 CC ND 15E 5270.0  -  5310.0 0.0209  
38 CC ND 15E 5500.0  -  5580.0 0.0196  
38 CC ND 15E 5660.0  -  5700.0 0.0207  
38 CC ND 15E 5510.0  -  5550.0 0.0116  
38 CC ND 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.21 W/kg and 1.31 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application zi/A3pmxgs0unq9Vg9qY/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/27/2019

Application Dated: 06/26/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  
CC 15C 2402.0  -  2480.0 0.002  

C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.14 W/kg and 1.20 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application zi/A3pmxgs0unq9Vg9qY/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/27/2019

Application Dated: 06/26/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  
CC 15C 2402.0  -  2480.0 0.002  

C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 0.14 W/kg and 1.20 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application tuVEZ9LTXqh5gz08eId9Rw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/13/2019

Application Dated: 06/12/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tuVEZ9LTXqh5gz08eId9Rw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/13/2019

Application Dated: 06/12/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application jSFNNrzhYtVzHtittp0hvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/26/2019

Application Dated: 06/26/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D

C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 1.06 W/kg and 1.31 W/kg respectively.

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.


EAS Grant - Application jSFNNrzhYtVzHtittp0hvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/26/2019

Application Dated: 06/26/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D

C2PC to add MobileHelp Tablet Base Station and disable frequency bands via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is 1.06 W/kg and 1.31 W/kg respectively.

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.



TCB Grant - Application EzxvrVf2HsSvHYzHVyFcag==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/13/2019

Application Dated: 06/12/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC 15E 5260.0  -  5320.0 0.0246  
38 CC 15E 5270.0  -  5310.0 0.0209  
38 CC 15E 5500.0  -  5580.0 0.0196  
38 CC 15E 5660.0  -  5700.0 0.0207  
38 CC 15E 5510.0  -  5550.0 0.0116  
38 CC 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EzxvrVf2HsSvHYzHVyFcag==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/13/2019

Application Dated: 06/12/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.024  
38 CC 15E 5190.0  -  5230.0 0.0199  
38 CC 15E 5260.0  -  5320.0 0.0246  
38 CC 15E 5270.0  -  5310.0 0.0209  
38 CC 15E 5500.0  -  5580.0 0.0196  
38 CC 15E 5660.0  -  5700.0 0.0207  
38 CC 15E 5510.0  -  5550.0 0.0116  
38 CC 15E 5670.0  -  5670.0 0.017  
38 CC 15E 5745.0  -  5825.0 0.0157  
38 CC 15E 5755.0  -  5795.0 0.012  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5mqqKU8pciA5K7r9Cnm15w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/13/2019

Application Dated: 06/12/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.7865 0.0203  PM 243KGXW
22H 824.2  -  848.8 0.4753 0.043  PM 247KG7W
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1850.2  -  1909.8 1.7579 0.0122  PM 245KGXW
24E 1850.2  -  1909.8 0.6871 0.0117  PM 248KG7W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
27 1712.4  -  1752.6 0.3767 0.0144  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 2510.0  -  2560.0 0.5105 0.0009  PM 18M5G7D
27 2510.0  -  2560.0 0.4385 0.0009  PM 18M5W7D
27 2507.5  -  2562.5 0.4446 0.0009  PM 13M5W7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D
27 782.0  -  782.0 0.3311 0.0035  PM 9M03G7D
27 782.0  -  782.0 0.2825 0.0035  PM 9M05W7D
27 779.5  -  784.5 0.3467 0.0035  PM 4M52G7D
27 779.5  -  784.5 0.2864 0.0035  PM 4M50W7D
24E 1860.0  -  1905.0 0.3467 0.0013  PM 18M2G7D
24E 1860.0  -  1905.0 0.2767 0.0013  PM 18M3W7D
24E 1855.0  -  1910.0 0.3556 0.0013  PM 8M99G7D
24E 1850.7  -  1914.3 0.2938 0.0013  PM 1M09W7D
22H 831.5  -  841.5 0.2037 0.0061  PM 13M5G7D
22H 831.5  -  841.5 0.2 0.0061  PM 13M5W7D
22H 826.5  -  846.5 0.2118 0.0061  PM 4M50G7D
90, 22H 821.5  -  821.5 0.2138 0.0045  PM 13M4G7D
90, 22H 821.5  -  821.5 0.191 0.0045  PM 13M4W7D
90, 22H 815.5  -  822.5 0.2198 0.0045  PM 2M73G7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.

EAS Grant - Application 5mqqKU8pciA5K7r9Cnm15w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/13/2019

Application Dated: 06/12/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.7865 0.0203  PM 243KGXW
22H 824.2  -  848.8 0.4753 0.043  PM 247KG7W
22H 826.4  -  846.6 0.2239 0.0215  PM 4M15F9W
24E 1850.2  -  1909.8 1.7579 0.0122  PM 245KGXW
24E 1850.2  -  1909.8 0.6871 0.0117  PM 248KG7W
24E 1852.4  -  1907.6 0.3581 0.0213  PM 4M15F9W
27 1712.4  -  1752.6 0.3767 0.0144  PM 4M15F9W
24E 1860.0  -  1900.0 0.3404 0.0021  PM 18M3G7D
24E 1860.0  -  1900.0 0.2864 0.0021  PM 18M4W7D
24E 1857.5  -  1902.5 0.3581 0.0021  PM 13M5G7D
24E 1857.5  -  1902.5 0.3048 0.0021  PM 13M5W7D
27 1720.0  -  1745.0 0.3811 0.0028  PM 18M4G7D
27 1720.0  -  1745.0 0.3357 0.0028  PM 18M6W7D
22H 829.0  -  844.0 0.2128 0.0044  PM 9M03G7D
22H 829.0  -  844.0 0.2046 0.0044  PM 9M03W7D
22H 825.5  -  847.5 0.2163 0.0044  PM 2M72G7D
27 2510.0  -  2560.0 0.5105 0.0009  PM 18M5G7D
27 2510.0  -  2560.0 0.4385 0.0009  PM 18M5W7D
27 2507.5  -  2562.5 0.4446 0.0009  PM 13M5W7D
27 704.0  -  711.0 0.2812 0.0052  PM 9M11G7D
27 704.0  -  711.0 0.2275 0.0052  PM 9M05W7D
27 701.5  -  713.5 0.2307 0.0052  PM 4M49W7D
27 782.0  -  782.0 0.3311 0.0035  PM 9M03G7D
27 782.0  -  782.0 0.2825 0.0035  PM 9M05W7D
27 779.5  -  784.5 0.3467 0.0035  PM 4M52G7D
27 779.5  -  784.5 0.2864 0.0035  PM 4M50W7D
24E 1860.0  -  1905.0 0.3467 0.0013  PM 18M2G7D
24E 1860.0  -  1905.0 0.2767 0.0013  PM 18M3W7D
24E 1855.0  -  1910.0 0.3556 0.0013  PM 8M99G7D
24E 1850.7  -  1914.3 0.2938 0.0013  PM 1M09W7D
22H 831.5  -  841.5 0.2037 0.0061  PM 13M5G7D
22H 831.5  -  841.5 0.2 0.0061  PM 13M5W7D
22H 826.5  -  846.5 0.2118 0.0061  PM 4M50G7D
90, 22H 821.5  -  821.5 0.2138 0.0045  PM 13M4G7D
90, 22H 821.5  -  821.5 0.191 0.0045  PM 13M4W7D
90, 22H 815.5  -  822.5 0.2198 0.0045  PM 2M73G7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 6 dBi at 700 MHz, 3 dBi at 800/850 MHz, 5 dBi at 1700 MHz, 2.5 dBi at 1900 MHz, and 8.5 dBi at 2500/2600 MHz, as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, Part 24 and Part 27.



TCB Grant - Application 3ddMYaaLHlVIdCgGewwMTw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/13/2019

Application Dated: 06/12/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  
CC 15C 2402.0  -  2480.0 0.002  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 3ddMYaaLHlVIdCgGewwMTw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/13/2019

Application Dated: 06/12/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1469  
CC 15C 2422.0  -  2452.0 0.1626  
CC 15C 2402.0  -  2480.0 0.002  

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /IWdbhDBZLyslDAqziDe0w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/27/2019

Application Dated: 06/26/2019
MobileHelp, LLC
5050 Conference Way N,
Suite 125
Boca Raton, FL 33431
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is <0.10 W/kg and 1.09 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /IWdbhDBZLyslDAqziDe0w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MobileHelp, LLC
5050 Conference Way N, Suite 125
Boca Raton, FL 33431
United States
  Date of Grant: 06/27/2019

Application Dated: 06/26/2019
 
Attention: Robert Flippo , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  PXT-201706SC20A
Name of Grantee:  MobileHelp, LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0065  

C2PC to add MobileHelp Tablet Base Station and reduce power via firmware. The highest reported SAR for body worn and simultaneous transmission exposure condition is <0.10 W/kg and 1.09 W/kg respectively.

Single Modular Approval. Power output listed is conducted. This device is to be used only for mobile and fixed application, with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with host antenna circuit trace layout design, antenna installation instructions, and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: