FCC ID QIPALAS66A-US

QIP-ALAS66A-US, QIP ALAS66AUS, QIPALAS66A-US, QIPALA566A-U5, Q1PALAS66A-US, OIPALAS66A-US, 0IPALAS66A-US

Gemalto M2M GmbH Cinterion ALAS66A-US ALAS66A-US

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: QIPALAS66A-US is QIP. The remaining characters of the FCC ID, ALAS66A-US, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Cinterion ALAS66A-US

App # Purpose Date Unique ID
1 Original Equipment 2019-02-27 ogcrsX5MF7jGe8T0aiTbuA==
2 Class II Permissive Change 2019-04-26 c9cMZYcDERseC8xR98b+lQ==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: LTE 41,TD 2500 DOWN | LTE 7,2600 UP | UMTS CH 7 UP |
Frequency RangePower OutputToleranceEmission DesignatorRule Parts App #
699.7-715.3 MHz245 mW0.1ppm4M51G7D27 1.13
699.7-715.3 MHz242 mW0.1ppm9M06G7D27 1.14
699.7-715.3 MHz203 mW0.1ppm4M55W7D27 1.15
699.7-715.3 MHz196 mW0.1ppm9M06W7D27 1.16
699.7-715.3 MHz245 mW0.1ppm4M51G7D27 2.13
699.7-715.3 MHz242 mW0.1ppm9M06G7D27 2.14
699.7-715.3 MHz203 mW0.1ppm4M55W7D27 2.15
699.7-715.3 MHz196 mW0.1ppm9M06W7D27 2.16
779.5-784.5 MHz180 mW0.1ppm8M93W7D27 1.2
779.5-784.5 MHz245 mW0.1ppm4M49G7D27 1.17
779.5-784.5 MHz232 mW0.1ppm8M94G7D27 1.18
779.5-784.5 MHz191 mW0.1ppm4M53W7D27 1.19
779.5-784.5 MHz180 mW0.1ppm8M93W7D27 2.2
779.5-784.5 MHz245 mW0.1ppm4M49G7D27 2.17
779.5-784.5 MHz232 mW0.1ppm8M94G7D27 2.18
779.5-784.5 MHz191 mW0.1ppm4M53W7D27 2.19
824.7-848.3 MHz234 mW0.1ppm4M53G7D22H 1.3
824.7-848.3 MHz230 mW0.1ppm9M02G7D22H 1.4
824.7-848.3 MHz192 mW0.1ppm4M55W7D22H 1.5
824.7-848.3 MHz185 mW0.1ppm9M02W7D22H 1.6
824.7-848.3 MHz234 mW0.1ppm4M53G7D22H 2.3
824.7-848.3 MHz230 mW0.1ppm9M02G7D22H 2.4
824.7-848.3 MHz192 mW0.1ppm4M55W7D22H 2.5
824.7-848.3 MHz185 mW0.1ppm9M02W7D22H 2.6
1.7107-1.7543 GHz223 mW0.1ppm18M1G7D27 1.22
1.7107-1.7543 GHz183 mW0.1ppm18M2W7D27 1.23
1.7107-1.7793 GHz229 mW0.1ppm9M01G7D27 1.24
1.7107-1.7793 GHz214 mW0.1ppm18M1G7D27 1.25
1.7107-1.7793 GHz188 mW0.1ppm18M1W7D27 1.26
1.7107-1.7543 GHz223 mW0.1ppm18M1G7D27 2.22
1.7107-1.7543 GHz183 mW0.1ppm18M2W7D27 2.23
1.7107-1.7793 GHz229 mW0.1ppm9M01G7D27 2.24
1.7107-1.7793 GHz214 mW0.1ppm18M1W7D27 2.25
1.7107-1.7793 GHz188 mW0.1ppm18M1W7D27 2.26
1.7124-1.7526 GHz337 mW0.1ppm4M13F9W27 1.21
1.7124-1.7526 GHz337 mW0.1ppm4M13F9W27 2.21
1.8502-1.9098 GHz1.268 Watts0.1ppm242KGXW24E 1.7
1.8502-1.9098 GHz1.268 Watts0.1ppm242KGXW24E 2.7
1.8507-1.9093 GHz234 mW0.1ppm18M1G7D24E 1.1
1.8507-1.9093 GHz247 mW0.1ppm13M5G7D24E 1.9
1.8507-1.9093 GHz192 mW0.1ppm13M5W7D24E 1.11
1.8507-1.9093 GHz185 mW0.1ppm18M1W7D24E 1.12
1.8507-1.9093 GHz234 mW0.1ppm18M1G7D24E 2.1
1.8507-1.9093 GHz247 mW0.1ppm13M5G7D24E 2.9
1.8507-1.9093 GHz192 mW0.1ppm13M5W7D24E 2.11
1.8507-1.9093 GHz185 mW0.1ppm18M1W7D24E 2.12
1.8524-1.9076 GHz352 mW0.1ppm4M13F9W24E 1.8
1.8524-1.9076 GHz352 mW0.1ppm4M13F9W24E 2.8
2.5025-2.5675 GHz222 mW0.1ppm18M2G7D27 1.27
2.5025-2.5675 GHz179 mW0.1ppm9M02W7D27 1.28
2.5025-2.5675 GHz177 mW0.1ppm18M2W7D27 1.29
2.5025-2.5675 GHz222 mW0.1ppm18M2G7D27 2.27
2.5025-2.5675 GHz179 mW0.1ppm9M02W7D27 2.28
2.5025-2.5675 GHz177 mW0.1ppm18M2W7D27 2.29

Exhibits

Available Exhibits

App #Document Type Submitted
Available
2 confidentialityCover Letter(s)
Adobe Acrobat PDF (63 kB)
2019-04-12
2019-04-26
2 declarationCover Letter(s)
Adobe Acrobat PDF (88 kB)
2019-04-12
2019-04-26
2 class II letterCover Letter(s)
Adobe Acrobat PDF (50 kB)
2019-04-12
2019-04-26
2 authorization letterCover Letter(s)
Adobe Acrobat PDF (40 kB)
2019-04-12
2019-04-26
2 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (571 kB)
2019-04-12
2019-04-26
2 Test reportTest Report
Adobe Acrobat PDF (4997 kB)
2019-04-12
2019-04-26
2 ID label/Location infoID Label/Location Info
Adobe Acrobat PDF (84 kB)
2019-04-12
2019-04-26
1 RF Exposure Info MPERF Exposure Info
Adobe Acrobat PDF (557 kB)
2019-02-27
2019-02-27
1 Test Report_FCCc_FINALTest Report
Adobe Acrobat PDF (4554 kB)
2019-02-27
2019-02-27
1 Test Report_FCCb_rev01-FINALTest Report
Adobe Acrobat PDF (4685 kB)
2019-02-27
2019-02-27
1 ConfidentialityCover Letter(s)
Adobe Acrobat PDF (68 kB)
2019-02-27
2019-02-27
1 Modular Approval RequestCover Letter(s)
Adobe Acrobat PDF (155 kB)
2019-02-27
2019-02-27
1 Authorization letterCover Letter(s)
Adobe Acrobat PDF (40 kB)
2019-02-27
2019-02-27
1 ID Label/Location InfoID Label/Location Info
Adobe Acrobat PDF (84 kB)
2019-02-27
2019-02-27

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 confidentiality Cover Letter(s)
Adobe Acrobat PDF (63 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 declaration Cover Letter(s)
Adobe Acrobat PDF (88 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 class II letter Cover Letter(s)
Adobe Acrobat PDF (50 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 authorization letter Cover Letter(s)
Adobe Acrobat PDF (40 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (571 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 Test report Test Report
Adobe Acrobat PDF (4997 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00
2 ID label/Location info ID Label/Location Info
Adobe Acrobat PDF (84 kB)
2019-04-12 00:00:00
2019-04-26 00:00:00

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 RF Exposure Info MPE RF Exposure Info
Adobe Acrobat PDF (557 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 Test Report_FCCc_FINAL Test Report
Adobe Acrobat PDF (4554 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 Test Report_FCCb_rev01-FINAL Test Report
Adobe Acrobat PDF (4685 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 Confidentiality Cover Letter(s)
Adobe Acrobat PDF (68 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 Modular Approval Request Cover Letter(s)
Adobe Acrobat PDF (155 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 Authorization letter Cover Letter(s)
Adobe Acrobat PDF (40 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00
1 ID Label/Location Info ID Label/Location Info
Adobe Acrobat PDF (84 kB)
2019-02-27 00:00:00
2019-02-27 00:00:00

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Test setup photo Test Setup Photos
Adobe Acrobat PDF (368 kB)
2019-04-12 00:00:00
2019-10-10 00:00:00

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Test Setup Photos Test Setup Photos
Adobe Acrobat PDF (368 kB)
2019-02-27 00:00:00
2019-06-30 00:00:00

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Parts list (BOM) Parts List/Tune Up Info
Adobe Acrobat PDF (249 kB)
2019-04-12 00:00:00
N/A

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Schematics Schematics
Adobe Acrobat PDF (880 kB)
2019-02-27 00:00:00
N/A
1 Label BOM Parts List/Tune Up Info
Adobe Acrobat PDF (249 kB)
2019-02-27 00:00:00
N/A

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 User manual Users Manual
Adobe Acrobat PDF (1000 kB)
2019-04-12 00:00:00
2019-10-10 00:00:00

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Users Manual Users Manual
Adobe Acrobat PDF (1062 kB)
2019-02-27 00:00:00
2019-06-30 00:00:00

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 External photo External Photos
Adobe Acrobat PDF (407 kB)
2019-04-12 00:00:00
2019-10-10 00:00:00

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 External Photos External Photos
Adobe Acrobat PDF (407 kB)
2019-02-27 00:00:00
2019-06-30 00:00:00

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Operational descripti_MPE mode of PAG (pre-PAG plan) Operational Description
Adobe Acrobat PDF (17 kB)
2019-04-16 00:00:00
N/A

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Operational Description Operational Description
Adobe Acrobat PDF (2211 kB)
2019-02-27 00:00:00
N/A
1 Block Diagram Block Diagram
Adobe Acrobat PDF (105 kB)
2019-02-27 00:00:00
N/A

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Tune up procedure Parts List/Tune Up Info
Adobe Acrobat PDF (99 kB)
2019-04-12 00:00:00
N/A

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Tune-up Procedure Parts List/Tune Up Info
Adobe Acrobat PDF (135 kB)
2019-02-27 00:00:00
N/A

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Internal photo Internal Photos
Adobe Acrobat PDF (433 kB)
2019-04-12 00:00:00
2019-10-10 00:00:00

APP # 1 (2019-02-27)

App # Document Type Submitted
Available
1 Internal Photos Internal Photos
Adobe Acrobat PDF (433 kB)
2019-02-27 00:00:00
2019-06-30 00:00:00

APP # 2 (2019-04-26)

App # Document Type Submitted
Available
2 Schematics Schematics
Adobe Acrobat PDF (880 kB)
2019-04-12 00:00:00
N/A
2 Block diagram Block Diagram
Adobe Acrobat PDF (105 kB)
2019-04-12 00:00:00
N/A
2 Operational description Operational Description
Adobe Acrobat PDF (2157 kB)
2019-04-12 00:00:00
N/A

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Gemalto M2M GmbH
FCC Registration Number (FRN): 0007412448
Alphanumeric FCC ID: QIPALAS66AUS
Unique Application Identifier: ogcrsX5MF7jGe8T0aiTbuA==
Line one: Siemensdamm 50
City: Berlin
State: N/A
Country: Germany
Zip Code: 13629

TCB Information
TCB Application Email Address: certification@telefication.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID
Grantee Code: QIP
Product Code: ALAS66A-US

Person at the applicant's address to receive grant or for contact
Name: Axel Heike
Title: Manager Approval
Telephone Number: 004930311028146 Extension:
Fax Number: 004930311028305
Email: axel.heike@gemalto.com

Technical Contact
Firm Name:
Gemalto M2M GmbH
First Name: Axel
Last Name: Heike
Line 1:
Siemensdamm 50
City: Berlin
Country:
Germany
Telephone Number:
004930311028146

Extension:
Fax Number: 004930311028305
E-Mail:

Non Technical Contact
Firm Name: Gemalto M2M GmbH
First Name: Axel
Last Name: Heike
Line 1: Siemensdamm 50
City: Berlin
Country: Germany
Telephone Number: 004930311028146 Extension:
Fax Number: 004930311028305
E-Mail: axel.heike@gemalto.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   06/30/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Cinterion ALAS66A-US

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  No

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Original Equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   7layers GmbH
First Name:   Bernhard
Last Name:   Retka
Telephone Number: 0049 2102 749 452 Extension:
Fax Number:  0049 2102 749 350
E-mail:  Bernhard.Retka@7layers.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Andreas Tuebel
Title of authorized signature:  Project Manager

Complete items below if agent signs the application:

Firm Name:  7Layers GmbH
Name:  Andreas Andreas Andreas
Line 1:  Andreas
Line 2:  Andreas
P.O. Box:  Andreas
City:  Andreas
State:  Andreas
Country:  Andreas
Zip Code:  Andreas
Telephone Number:  4902102749336
E-mail:  Andreas.Tuebel@7Layers.com

Application for Equipment Authorization FCC Form 731 TCB Version


Applicant Information
Applicant's complete, legal business name: Gemalto M2M GmbH
FCC Registration Number (FRN): 0007412448
Alphanumeric FCC ID: QIPALAS66AUS
Unique Application Identifier: c9cMZYcDERseC8xR98b+lQ==
Line one: Siemensdamm 50
City: Berlin
State: N/A
Country: Germany
Zip Code: 13629

TCB Information
TCB Application Email Address: certification@telefication.com
TCB Scope: B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27

FCC ID
Grantee Code: QIP
Product Code: ALAS66A-US

Person at the applicant's address to receive grant or for contact
Name: Axel Heike
Title: Manager Approval
Telephone Number: 004930311028146 Extension:
Fax Number: 004930311028305
Email: axel.heike@gemalto.com

Technical Contact
Firm Name:
Gemalto M2M GmbH
First Name: Axel
Last Name: Heike
Line 1:
Siemensdamm 50
Line 2:
Berlin
Country:
Germany
Telephone Number:
49 30 31102-8146

Extension:
Fax Number: 49 30 31102-8305
E-Mail:

Non Technical Contact
Firm Name: Gemalto M2M GmbH
First Name: Axel
Last Name: Heike
Line 1: Siemensdamm 50
Line 2: Berlin
Country: Germany
Telephone Number: 49 30 31102-8146 Extension:
Fax Number: 49 30 31102-8305
E-Mail: axel.heike@gemalto.com

Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:   Yes

Short-Term Confidentiality
Does short-term confidentiality apply to this application?:   Yes
If so, specify the short-term confidentiality release date (MM/DD/YYYY format):   10/10/2019
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio
Is this application for software defined/cognitive radio authorization?   No

Equipment Class
Equipment Class:   PCB - PCS Licensed Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant): Cinterion ALAS66A-US

Related OET KnowledgeDataBase Inquiry
Is there a KDB inquiry associated with this application?  Yes

Modular Equipment
Modular Type:  Single Modular Approval

Application Purpose
Application is for:   Class II permissive change or modification of presently authorized equipment

Composite/Related Equipment
Is the equipment in this application a composite device subject to an additional equipment authorization?   No
Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?   No


Test Firm Information
Name of test firm and contact person on file with the FCC:
Firm Name:   7layers GmbH
First Name:   Bernhard
Last Name:   Retka
Telephone Number: 0049 2102 749 452 Extension:
Fax Number:  0049 2102 749 350
E-mail:  Bernhard.Retka@7layers.com

Grant Comments
Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Class II Permissive Change : This module add to support the following LTE Carrier Aggregation modes enabled by software: CA_5A-7A and CA_7C. Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.
Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver
Is there an equipment authorization waiver associated with this application?  No
If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?:  No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:
The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify?  Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing:  Andreas Tubel
Title of authorized signature:  Project Manager

Complete items below if agent signs the application:

Firm Name:  7Layers GmbH
Name:  Andreas Andreas Andreas
Line 1:  Andreas
Line 2:  Andreas
P.O. Box:  Andreas
City:  Andreas
State:  Andreas
Country:  Andreas
Zip Code:  Andreas
E-mail:  Andreas.Tuebel@7Layers.com

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

Grants

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 04/26/2019

Application Dated: 04/12/2019
Gemalto M2M GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPALAS66A-US
Name of Grantee:  Gemalto M2M GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Cinterion ALAS66A-US
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.495 0.1  PM 245KGXW
22H 826.4  -  846.6 0.356 0.1  PM 4M13F9W
22H 824.7  -  848.3 0.234 0.1  PM 4M53G7D
22H 824.7  -  848.3 0.23 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.192 0.1  PM 4M55W7D
22H 824.7  -  848.3 0.185 0.1  PM 9M02W7D
24E 1850.2  -  1909.8 1.268 0.1  PM 242KGXW
24E 1852.4  -  1907.6 0.352 0.1  PM 4M13F9W
24E 1850.7  -  1909.3 0.247 0.1  PM 13M5G7D
24E 1850.7  -  1909.3 0.234 0.1  PM 18M1G7D
24E 1850.7  -  1909.3 0.192 0.1  PM 13M5W7D
24E 1850.7  -  1909.3 0.185 0.1  PM 18M1W7D
27 699.7  -  715.3 0.245 0.1  PM 4M51G7D
27 699.7  -  715.3 0.242 0.1  PM 9M06G7D
27 699.7  -  715.3 0.203 0.1  PM 4M55W7D
27 699.7  -  715.3 0.196 0.1  PM 9M06W7D
27 779.5  -  784.5 0.245 0.1  PM 4M49G7D
27 779.5  -  784.5 0.232 0.1  PM 8M94G7D
27 779.5  -  784.5 0.191 0.1  PM 4M53W7D
27 779.5  -  784.5 0.18 0.1  PM 8M93W7D
27 1712.4  -  1752.6 0.337 0.1  PM 4M13F9W
27 1710.7  -  1754.3 0.223 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.183 0.1  PM 18M2W7D
27 1710.7  -  1779.3 0.229 0.1  PM 9M01G7D
27 1710.7  -  1779.3 0.214 0.1  PM 18M1W7D
27 1710.7  -  1779.3 0.188 0.1  PM 18M1W7D
27 2502.5  -  2567.5 0.222 0.1  PM 18M2G7D
27 2502.5  -  2567.5 0.179 0.1  PM 9M02W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M2W7D

Class II Permissive Change : This module add to support the following LTE Carrier Aggregation modes enabled by software: CA_5A-7A and CA_7C.

Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemalto M2M GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 04/26/2019

Application Dated: 04/12/2019
 
Attention: Axel Heike , Manager Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPALAS66A-US
Name of Grantee:  Gemalto M2M GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Cinterion ALAS66A-US
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.495 0.1  PM 245KGXW
22H 826.4  -  846.6 0.356 0.1  PM 4M13F9W
22H 824.7  -  848.3 0.234 0.1  PM 4M53G7D
22H 824.7  -  848.3 0.23 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.192 0.1  PM 4M55W7D
22H 824.7  -  848.3 0.185 0.1  PM 9M02W7D
24E 1850.2  -  1909.8 1.268 0.1  PM 242KGXW
24E 1852.4  -  1907.6 0.352 0.1  PM 4M13F9W
24E 1850.7  -  1909.3 0.247 0.1  PM 13M5G7D
24E 1850.7  -  1909.3 0.234 0.1  PM 18M1G7D
24E 1850.7  -  1909.3 0.192 0.1  PM 13M5W7D
24E 1850.7  -  1909.3 0.185 0.1  PM 18M1W7D
27 699.7  -  715.3 0.245 0.1  PM 4M51G7D
27 699.7  -  715.3 0.242 0.1  PM 9M06G7D
27 699.7  -  715.3 0.203 0.1  PM 4M55W7D
27 699.7  -  715.3 0.196 0.1  PM 9M06W7D
27 779.5  -  784.5 0.245 0.1  PM 4M49G7D
27 779.5  -  784.5 0.232 0.1  PM 8M94G7D
27 779.5  -  784.5 0.191 0.1  PM 4M53W7D
27 779.5  -  784.5 0.18 0.1  PM 8M93W7D
27 1712.4  -  1752.6 0.337 0.1  PM 4M13F9W
27 1710.7  -  1754.3 0.223 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.183 0.1  PM 18M2W7D
27 1710.7  -  1779.3 0.229 0.1  PM 9M01G7D
27 1710.7  -  1779.3 0.214 0.1  PM 18M1W7D
27 1710.7  -  1779.3 0.188 0.1  PM 18M1W7D
27 2502.5  -  2567.5 0.222 0.1  PM 18M2G7D
27 2502.5  -  2567.5 0.179 0.1  PM 9M02W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M2W7D

Class II Permissive Change : This module add to support the following LTE Carrier Aggregation modes enabled by software: CA_5A-7A and CA_7C.

Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.



Mail To:


EA361219
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Edisonstraat 12a
Zevenaar, NL-6902 PK
Netherlands
Date of Grant: 02/27/2019

Application Dated: 02/27/2019
Gemalto M2M GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPALAS66A-US
Name of Grantee:  Gemalto M2M GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Cinterion ALAS66A-US
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.495 0.1  PM 245KGXW
22H 826.4  -  846.6 0.356 0.1  PM 4M13F9W
22H 824.7  -  848.3 0.234 0.1  PM 4M53G7D
22H 824.7  -  848.3 0.23 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.192 0.1  PM 4M55W7D
22H 824.7  -  848.3 0.185 0.1  PM 9M02W7D
24E 1850.2  -  1909.8 1.268 0.1  PM 242KGXW
24E 1852.4  -  1907.6 0.352 0.1  PM 4M13F9W
24E 1850.7  -  1909.3 0.247 0.1  PM 13M5G7D
24E 1850.7  -  1909.3 0.234 0.1  PM 18M1G7D
24E 1850.7  -  1909.3 0.192 0.1  PM 13M5W7D
24E 1850.7  -  1909.3 0.185 0.1  PM 18M1W7D
27 699.7  -  715.3 0.245 0.1  PM 4M51G7D
27 699.7  -  715.3 0.242 0.1  PM 9M06G7D
27 699.7  -  715.3 0.203 0.1  PM 4M55W7D
27 699.7  -  715.3 0.196 0.1  PM 9M06W7D
27 779.5  -  784.5 0.245 0.1  PM 4M49G7D
27 779.5  -  784.5 0.232 0.1  PM 8M94G7D
27 779.5  -  784.5 0.191 0.1  PM 4M53W7D
27 779.5  -  784.5 0.18 0.1  PM 8M93W7D
27 1712.4  -  1752.6 0.337 0.1  PM 4M13F9W
27 1710.7  -  1754.3 0.223 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.183 0.1  PM 18M2W7D
27 1710.7  -  1779.3 0.229 0.1  PM 9M01G7D
27 1710.7  -  1779.3 0.214 0.1  PM 18M1G7D
27 1710.7  -  1779.3 0.188 0.1  PM 18M1W7D
27 2502.5  -  2567.5 0.222 0.1  PM 18M2G7D
27 2502.5  -  2567.5 0.179 0.1  PM 9M02W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M2W7D

Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.


COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Gemalto M2M GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 02/27/2019

Application Dated: 02/27/2019
 
Attention: Axel Heike , Manager Approval

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPALAS66A-US
Name of Grantee:  Gemalto M2M GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Cinterion ALAS66A-US
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.495 0.1  PM 245KGXW
22H 826.4  -  846.6 0.356 0.1  PM 4M13F9W
22H 824.7  -  848.3 0.234 0.1  PM 4M53G7D
22H 824.7  -  848.3 0.23 0.1  PM 9M02G7D
22H 824.7  -  848.3 0.192 0.1  PM 4M55W7D
22H 824.7  -  848.3 0.185 0.1  PM 9M02W7D
24E 1850.2  -  1909.8 1.268 0.1  PM 242KGXW
24E 1852.4  -  1907.6 0.352 0.1  PM 4M13F9W
24E 1850.7  -  1909.3 0.247 0.1  PM 13M5G7D
24E 1850.7  -  1909.3 0.234 0.1  PM 18M1G7D
24E 1850.7  -  1909.3 0.192 0.1  PM 13M5W7D
24E 1850.7  -  1909.3 0.185 0.1  PM 18M1W7D
27 699.7  -  715.3 0.245 0.1  PM 4M51G7D
27 699.7  -  715.3 0.242 0.1  PM 9M06G7D
27 699.7  -  715.3 0.203 0.1  PM 4M55W7D
27 699.7  -  715.3 0.196 0.1  PM 9M06W7D
27 779.5  -  784.5 0.245 0.1  PM 4M49G7D
27 779.5  -  784.5 0.232 0.1  PM 8M94G7D
27 779.5  -  784.5 0.191 0.1  PM 4M53W7D
27 779.5  -  784.5 0.18 0.1  PM 8M93W7D
27 1712.4  -  1752.6 0.337 0.1  PM 4M13F9W
27 1710.7  -  1754.3 0.223 0.1  PM 18M1G7D
27 1710.7  -  1754.3 0.183 0.1  PM 18M2W7D
27 1710.7  -  1779.3 0.229 0.1  PM 9M01G7D
27 1710.7  -  1779.3 0.214 0.1  PM 18M1G7D
27 1710.7  -  1779.3 0.188 0.1  PM 18M1W7D
27 2502.5  -  2567.5 0.222 0.1  PM 18M2G7D
27 2502.5  -  2567.5 0.179 0.1  PM 9M02W7D
27 2502.5  -  2567.5 0.177 0.1  PM 18M2W7D

Single Modular Approval. Power listed is maximum conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

This device supports LTE of 1.4, 3, 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Bands 2, 4, and 66; LTE of 1.4, 3, 5, and 10MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5, and 10MHz bandwidth modes for FDD LTE Bands 13. LTE of 5, 10, 15, and 20MHz bandwidth modes for FDD LTE Band 7.



Mail To:


EA585398

Grants authorize equipment for operation at approved frequencies and sale within the USA. Click an above grant to view details