FCC ID QIPPLS83-W

Module

by Telit Cinterion Deutschland GmbH

Grantee Code: QIP   Product Code: PLS83W
Latest application date: 2023-09-03

FCC ID Device Details

FCC IDQIPPLS83-W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQIP
Product CodePLS83W
Applicant BusinessTelit Cinterion Deutschland GmbH 🇩🇪
Related Domains telit.com
Equipment ClassModule
Test FirmShenzhen UnionTrust Quality and Technology Co., Lt

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2580-2610 MHzClass II permissive change or modification of presently authorized equipment2023-09-03
699.7-715.3 MHzClass II permissive change or modification of presently authorized equipment2021-08-30
699.7-715.3 MHzOriginal Equipment2021-01-21

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2021-08-30PDF 2.4 MB
User Manual Metadata onlyUsers Manual2021-04-30PDF 1.2 MB
User Manual rev1Users Manual2021-04-30PDF 1.1 MB
Users Manual rev1Users Manual2021-04-30PDF 1.1 MB
Internal PhotosInternal Photos2023-09-03PDF 437.6 KB
Internal PhotosInternal Photos2021-08-30PDF 892 KB
Internal PhotosInternal Photos2021-04-30PDF 884.5 KB
External PhotosExternal Photos2023-09-03PDF 490.5 KB
External PhotosExternal Photos2021-08-30PDF 1,016.9 KB
External PhotosExternal Photos2021-04-30PDF 1,009.4 KB
Label & Label locationID Label/Location Info2021-01-21PDF 232.6 KB
Label & LocationID Label/Location Info2021-01-21PDF 232.6 KB
Test Report 4G-15Schematics2023-09-03PDF 5.4 MB
Test Setup PhotosTest Setup Photos2023-09-03PDF 548.5 KB
Test Setup PhotosTest Setup Photos2023-09-03PDF 719.2 KB
Test Setup PhotosTest Setup Photos2021-08-30PDF 611.3 KB
Test Setup PhotosTest Setup Photos2021-04-30PDF 1.9 MB
test setup photosTest Setup Photos2021-04-30PDF 938 KB
Test ReportTest Report2023-09-03PDF 1.3 MB
Test Report 2/3G-1Test Report2023-09-03PDF 6 MB
Test Report 2/3G-2Test Report2023-09-03PDF 1.7 MB
Test Report 4G-1Test Report2023-09-03PDF 5.8 MB
Test Report 4G-10Test Report2023-09-03PDF 6 MB
Test Report 4G-11Test Report2023-09-03PDF 5.7 MB
Test Report 4G-12Test Report2023-09-03PDF 5.4 MB
Test Report 4G-13Test Report2023-09-03PDF 5.4 MB
Test Report 4G-14Test Report2023-09-03PDF 5.7 MB
Test Report 4G-16Test Report2023-09-03PDF 2.7 MB
Test Report 4G-2Test Report2023-09-03PDF 5.9 MB
Test Report 4G-3Test Report2023-09-03PDF 5.9 MB
Test Report 4G-4Test Report2023-09-03PDF 5.9 MB
Test Report 4G-5Test Report2023-09-03PDF 5.9 MB
Test Report 4G-6Test Report2023-09-03PDF 6 MB
Test Report 4G-7Test Report2023-09-03PDF 5.9 MB
Test Report 4G-8Test Report2023-09-03PDF 5.6 MB
Test Report 4G-9Test Report2023-09-03PDF 5.7 MB
Test Report Part 27P (LTE B8)Test Report2021-08-30PDF 3.7 MB
Test ReportTest Report2021-01-21PDF 1.4 MB
Test Report LTE part1Test Report2021-01-21PDF 3.7 MB
Test Report LTE part10Test Report2021-01-21PDF 5.2 MB
Test Report LTE part11Test Report2021-01-21PDF 5 MB
Test Report LTE part12Test Report2021-01-21PDF 4.9 MB
Test Report LTE part13Test Report2021-01-21PDF 4.9 MB
Test Report LTE part14Test Report2021-01-21PDF 2.4 MB
Test Report LTE part2Test Report2021-01-21PDF 5 MB
Test Report LTE part3Test Report2021-01-21PDF 4.8 MB
Test Report LTE part4Test Report2021-01-21PDF 5 MB
Test Report LTE part5Test Report2021-01-21PDF 5.3 MB
Test Report LTE part6Test Report2021-01-21PDF 5.3 MB
Test Report LTE part7Test Report2021-01-21PDF 5.1 MB
Test Report LTE part8Test Report2021-01-21PDF 5.1 MB
Test Report LTE part9Test Report2021-01-21PDF 5.3 MB
Test report GSM WCDMA part1Test Report2021-01-21PDF 5 MB
Test report GSM WCDMA part2Test Report2021-01-21PDF 5.3 MB
Test report GSM WCDMA part3Test Report2021-01-21PDF 606.6 KB
Attestation Statements part 2.911_d__5__i_ filingAttestation Statements2023-09-03PDF 218.9 KB
Attestation Statements part 2.911_d__5__ii_ filingAttestation Statements2023-09-03PDF 216.6 KB
US agent LetterAttestation Statements2023-09-03PDF 605.4 KB
US agent letterAttestation Statements2023-09-03PDF 605.4 KB
C2PC Cover LetterCover Letter(s)2023-09-03PDF 225.7 KB
C2PC LetterCover Letter(s)2023-09-03PDF 225.7 KB
CONF LetterCover Letter(s)2023-09-03PDF 239.2 KB
Name ChangeCover Letter(s)2023-09-03PDF 186.3 KB
POA LetterCover Letter(s)2023-09-03PDF 223.6 KB
C2PC Cover LetterCover Letter(s)2021-08-30PDF 542.9 KB
Confidentiality LetterCover Letter(s)2021-08-30PDF 355.8 KB
LOA LetterCover Letter(s)2021-08-30PDF 355.4 KB
Confidentiality Letter short-termCover Letter(s)2021-01-21PDF 357.9 KB
ConfidentialityLetter long-termCover Letter(s)2021-01-21PDF 357.9 KB
Modular ApprovalCover Letter(s)2021-01-21PDF 381.5 KB
Modular Approval RequestCover Letter(s)2021-01-21PDF 381.5 KB
POACover Letter(s)2021-01-21PDF 356.2 KB
long-term Confidentiality RequestCover Letter(s)2021-01-21PDF 357.9 KB
short-term Confidentiality Request LetterCover Letter(s)2021-01-21PDF 357.9 KB
RF Exposure InfoRF Exposure Info2023-09-03PDF 761.6 KB
RF ExposureRF Exposure Info2021-08-30PDF 714.4 KB
MPERF Exposure Info2021-01-21PDF 802.4 KB
MPE rev1 Metadata onlyRF Exposure Info2021-01-21PDF 943.2 KB
MPE rev2RF Exposure Info2021-01-21PDF 1,001.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 123.4 KB
PCB Layout Metadata onlySchematicsPDF 3.6 MB
PCB layout Metadata onlySchematicsPDF 3.6 MB
Schematics Metadata onlySchematicsPDF 306.9 KB
schematics Metadata onlySchematicsPDF 306.9 KB
Operation Description-1 Metadata onlyOperational DescriptionPDF 190.2 KB
Operation Description-2 Metadata onlyOperational DescriptionPDF 215.7 KB
Operation Description-3 Metadata onlyOperational DescriptionPDF 195.1 KB
Operational Description Metadata onlyOperational DescriptionPDF 2 MB
BOM Metadata onlyParts List/Tune Up InfoPDF 57.1 KB
BOM List Metadata onlyParts List/Tune Up InfoPDF 57.1 KB
Tune Up Proceedure Metadata onlyParts List/Tune Up InfoPDF 594.4 KB
Tune-up Procedure Metadata onlyParts List/Tune Up InfoPDF 594.4 KB

Application Information

Application IDlAn9GFpYaZT/nMt1cz/E6A==
Final Action Date2023-09-03
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0007412448
ModelPLS83-W
Frequency Range2580-2610 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionModule
Responsible PartyLeandro Wan-Dall, Head of Certification Management, leandro.wan-dall@telit.com , 00490166355178
Test FirmGeorge Luo, Shenzhen UnionTrust Quality and Technology Co., Lt, quality@uttlab.com , +86-755-28230888
TCB EmailTEI@timcoengr.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsC2PC: Add one eSIM component on the PCB and update the FW with eSIM function. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

Applications

Application IDDatePurpose
lAn9GFpYaZT/nMt1cz/E6A==2023-09-03Class II permissive change or modification of presently authorized equipment
Y1l17U6g7sN67E0s0BfgoA==2023-09-03Class II permissive change or modification of presently authorized equipment
XGhd4mPebnANn9tm7akuow==2021-08-30Class II permissive change or modification of presently authorized equipment
yozDJZ+sxGJQkozKSZs0VQ==2021-01-21Original Equipment
KTwJs51kAQdvJ54Bzf3GdA==2021-01-21Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
699.7-715.3 MHz0.150660.0226ppm1M10G7D27
699.7-715.3 MHz0.1390.0226ppm1M10W7D27
704-711 MHz0.147230.0226ppm9M01G7D27
704-711 MHz0.137720.0226ppm8M98W7D27
782 MHz0.133050.0166ppm8M94G7D22H
782 MHz0.124740.0166ppm8M96W7D22H
814.7-823.3 MHz0.127640.022ppm1M11G7D9
815.5-822.5 MHz0.119950.022ppm2M69W7D9
819 MHz0.133350.022ppm8M95G7D9
819 MHz0.12050.022ppm2M69W7D9
826.4-846.6 MHz0.283790.0108ppm4M15F9W22H
829-844 MHz0.1390.0084ppm9M00G7D22H
829-844 MHz0.118850.0084ppm9M00W7D22H
831.5-841.5 MHz0.130020.0227ppm13M5G7D22H
831.5-841.5 MHz0.134590.0227ppm13M5W7D22H
898.2-899.8 MHz0.263030.0004ppm2M72G7W27
898.2-899.8 MHz0.212810.0004ppm2M70G7W27
898.2-899.8 MHz0.212810.0004ppm2M70D7W27
1710.7-1754.3 MHz0.207010.0052ppm1M11G7D27
1712.4-1752.6 MHz0.260020.0104ppm4M14F9W27
1712.5-1777.5 MHz0.228030.008ppm4M54W7D27
1715-1775 MHz0.232270.008ppm8M99G7D27
1720-1745 MHz0.199990.0052ppm18M0G7D27
1720-1745 MHz0.199990.19999ppm18M0G7D27
1720-1745 MHz0.172980.0052ppm17M9W7D27
1720-1770 MHz0.201840.008ppm17M9G7D27
1720-1770 MHz0.190110.008ppm17M9W7D27
1850.2-1909.8 MHz0.433510.0101ppm246KG7W24E
1852.4-1907.6 MHz0.283140.0101ppm4M14F9W24E
1860-1900 MHz0.232810.0037ppm17M9G7D24E
1860-1900 MHz0.231210.0037ppm18M0W7D24E
2502.5-2567.5 MHz0.206540.0036ppm4M53W7D27
2510-2560 MHz0.199530.0036ppm18M0G7D27
2510-2560 MHz0.185350.0036ppm17M9W7D27
2545-2645 MHz0.226990.0039ppm18M0G7D27
2545-2645 MHz0.209890.0039ppm18M0W7D27

Grants

TCB Grant - Application yozDJZ+sxGJQkozKSZs0VQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/21/2021

Application Dated: 01/21/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 


EAS Grant - Application yozDJZ+sxGJQkozKSZs0VQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 01/21/2021

Application Dated: 01/21/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 



TCB Grant - Application Y1l17U6g7sN67E0s0BfgoA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/03/2023

Application Dated: 09/03/2023
Telit Cinterion Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Leandro Wan-Dall , Head of Certification Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  Telit Cinterion Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Add one eSIM component on the PCB and update the FW with eSIM function.

EAS Grant - Application Y1l17U6g7sN67E0s0BfgoA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telit Cinterion Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 09/03/2023

Application Dated: 09/03/2023
 
Attention: Leandro Wan-Dall , Head of Certification Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  Telit Cinterion Deutschland GmbH
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15B  - 

C2PC: Add one eSIM component on the PCB and update the FW with eSIM function.



TCB Grant - Application XGhd4mPebnANn9tm7akuow==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 08/30/2021

Application Dated: 08/30/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.0052  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D
27 898.2  -  899.8 0.26303 0.0004  PM 2M72G7W
27 898.2  -  899.8 0.21281 0.0004  PM 2M70D7W

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41, and LTE of 1.4 and 3 MHz bandwidth modes for FDD LTE Band 8. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

C2PC: Addition of LTE Band 8 operation.


EAS Grant - Application XGhd4mPebnANn9tm7akuow==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 08/30/2021

Application Dated: 08/30/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.0052  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D
27 898.2  -  899.8 0.26303 0.0004  PM 2M72G7W
27 898.2  -  899.8 0.21281 0.0004  PM 2M70D7W

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41, and LTE of 1.4 and 3 MHz bandwidth modes for FDD LTE Band 8. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.

C2PC: Addition of LTE Band 8 operation.



TCB Grant - Application lAn9GFpYaZT/nMt1cz/E6A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 09/03/2023

Application Dated: 09/03/2023
Telit Cinterion Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Leandro Wan-Dall , Head of Certification Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  Telit Cinterion Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.19999  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D
27 898.2  -  899.8 0.26303 0.0004  PM 2M72G7W
27 898.2  -  899.8 0.21281 0.0004  PM 2M70G7W

C2PC: Add one eSIM component on the PCB and update the FW with eSIM function. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.


EAS Grant - Application lAn9GFpYaZT/nMt1cz/E6A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Telit Cinterion Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 09/03/2023

Application Dated: 09/03/2023
 
Attention: Leandro Wan-Dall , Head of Certification Management

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  Telit Cinterion Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.19999  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D
27 898.2  -  899.8 0.26303 0.0004  PM 2M72G7W
27 898.2  -  899.8 0.21281 0.0004  PM 2M70G7W

C2PC: Add one eSIM component on the PCB and update the FW with eSIM function. Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



TCB Grant - Application KTwJs51kAQdvJ54Bzf3GdA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/21/2021

Application Dated: 01/21/2021
THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.0052  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.


EAS Grant - Application KTwJs51kAQdvJ54Bzf3GdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

THALES DIS AlS Deutschland GmbH
Siemensdamm 50
Berlin, 13629
Germany
  Date of Grant: 01/21/2021

Application Dated: 01/21/2021
 
Attention: Axel Heike , Manager Certifications

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QIPPLS83-W
Name of Grantee:  THALES DIS AlS Deutschland GmbH
Equipment Class: PCS Licensed Transmitter
Notes: Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 2.2751 0.0251  PM 245KGXW
22H 824.2  -  848.8 0.57412 0.0251  PM 243KG7W
24E 1850.2  -  1909.8 1.1885 0.0101  PM 244KGXW
24E 1850.2  -  1909.8 0.43351 0.0101  PM 246KG7W
24E 1852.4  -  1907.6 0.28314 0.0101  PM 4M14F9W
27 1712.4  -  1752.6 0.26002 0.0104  PM 4M14F9W
22H 826.4  -  846.6 0.28379 0.0108  PM 4M15F9W
24E 1860.0  -  1900.0 0.23281 0.0037  PM 17M9G7D
24E 1860.0  -  1900.0 0.23121 0.0037  PM 18M0W7D
27 1710.7  -  1754.3 0.20701 0.0052  PM 1M11G7D
27 1720.0  -  1745.0 0.19999 0.0052  PM 18M0G7D
27 1720.0  -  1745.0 0.17298 0.0052  PM 17M9W7D
22H 829.0  -  844.0 0.139 0.0084  PM 9M00G7D
22H 829.0  -  844.0 0.11885 0.0084  PM 9M00W7D
27 2510.0  -  2560.0 0.19953 0.0036  PM 18M0G7D
27 2502.5  -  2567.5 0.20654 0.0036  PM 4M53W7D
27 2510.0  -  2560.0 0.18535 0.0036  PM 17M9W7D
27 699.7  -  715.3 0.15066 0.0226  PM 1M10G7D
27 704.0  -  711.0 0.14723 0.0226  PM 9M01G7D
27 699.7  -  715.3 0.139 0.0226  PM 1M10W7D
27 704.0  -  711.0 0.13772 0.0226  PM 8M98W7D
22H 782.0  -  782.0 0.13305 0.0166  PM 8M94G7D
22H 782.0  -  782.0 0.12474 0.0166  PM 8M96W7D
22H 831.5  -  841.5 0.13002 0.0227  PM 13M5G7D
22H 831.5  -  841.5 0.13459 0.0227  PM 13M5W7D
90 814.7  -  823.3 0.12764 0.022  PM 1M11G7D
90 819.0  -  819.0 0.13335 0.022  PM 8M95G7D
90 815.5  -  822.5 0.11995 0.022  PM 2M69W7D
90 819.0  -  819.0 0.1205 0.022  PM 2M69W7D
27 2580.0  -  2610.0 0.19724 0.0046  PM 18M0G7D
27 2580.0  -  2610.0 0.20845 0.0046  PM 18M0W7D
27 2545.0  -  2645.0 0.22699 0.0039  PM 18M0G7D
27 2545.0  -  2645.0 0.20989 0.0039  PM 18M0W7D
27 1715.0  -  1775.0 0.23227 0.008  PM 8M99G7D
27 1720.0  -  1770.0 0.20184 0.008  PM 17M9G7D
27 1712.5  -  1777.5 0.22803 0.008  PM 4M54W7D
27 1720.0  -  1770.0 0.19011 0.008  PM 17M9W7D

Single Modular Approval. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. OEM integrators must be provided labeling requirements for finished products. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Output Power listed is the maximum conducted output power. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Users must be provided with instructions and transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance may need to be addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirements of Part 1.1307(b)(3). The Antenna(s) used for this transmitter must not exceed a maximum gain as described in the filing. This device supports: LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 2, 4 and 66; LTE of 1.4, 3, 5, 10, and 15 MHz bandwidth modes for FDD LTE Band 26; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Band 5, 12 and 26; LTE of 5 and 10 MHz bandwidth modes for FDD LTE band 13; LTE of 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Band 7; LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 38 and 41. This device contains functions that are not operational in U.S. Territories; this filing is applicable only for U.S. operations.



Mail To: