FCC ID QXO-RBTBHR2W

Wireless LAN Card

by Extreme Networks, Inc.

Grantee Code: QXO   Product Code: RBTBHR2W
Latest application date: 2005-02-04

FCC ID Device Details

FCC IDQXO-RBTBHR2W
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeQXO
Product CodeRBTBHR2W
Applicant BusinessExtreme Networks, Inc. 🇺🇸
Related Domains extremenetworks.com
Equipment ClassWireless LAN Card
Test FirmBUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2400-2483.5 MHzClass II permissive change or modification of presently authorized equipment2005-02-04
5150-5350 MHzClass II permissive change or modification of presently authorized equipment2005-02-04
2400-2483.5 MHzOriginal Equipment2004-09-27
5150-5350 MHzOriginal Equipment2004-09-27

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2005-02-04PDF 139.4 KB
INSTALLGUIDEUsers Manual2004-09-27PDF 203.1 KB
Installation GuideUsers Manual2004-09-27PDF 203.1 KB
Internal PhotosInternal Photos2004-09-27PDF 649 KB
Antenna PhotosExternal Photos2004-09-27PDF 89.3 KB
External PhotosExternal Photos2004-09-27PDF 428.7 KB
LabelID Label/Location Info2004-09-27PDF 295.5 KB
Label PlacementID Label/Location Info2004-09-27PDF 93.3 KB
Antenna Specifications RBTES AH P23MOperational Description2005-02-04PDF 68.3 KB
Antenna Specifications RBTES AM M10MOperational Description2005-02-04PDF 85.8 KB
Antenna Specifications RBTES AW S1590MOperational Description2005-02-04PDF 2.5 MB
Antenna Specifications RBTES BG M08MOperational Description2005-02-04PDF 111.1 KB
Antenna Specifications RBTES BG P18MOperational Description2005-02-04PDF 2.3 MB
Antenna Specifications RBTES BG PAR24MOperational Description2005-02-04PDF 811.3 KB
Antenna Specifications RBTES BG S1490MOperational Description2005-02-04PDF 3.6 MB
Antenna Specifications RBTES BG Y15MOperational Description2005-02-04PDF 121 KB
Test Setup PhotosTest Setup Photos2005-02-04PDF 357 KB
Setup PhotosTest Setup Photos2004-09-27PDF 303.7 KB
Test ReportTest Report2005-02-04PDF 311.5 KB
Agere FCC 15 407cTest Report2004-09-27PDF 99.7 KB
Agere FCC 15 407dTest Report2004-09-27PDF 76.3 KB
Technical ReportTest Report2004-09-27PDF 456.1 KB
Class II Permissive ChangeCover Letter(s)2005-02-04PDF 54.6 KB
Firmware descriptionCover Letter(s)2005-02-04PDF 49.2 KB
Response to TCB FindingsCover Letter(s)2005-02-04PDF 50.1 KB
ConfidentialityCover Letter(s)2004-09-27PDF 22 KB
Response to TCB findingsCover Letter(s)2004-09-27PDF 50 KB
2 4GHz MPE calculationRF Exposure Info2005-02-04PDF 70.4 KB
5GHz MPE calculationRF Exposure Info2005-02-04PDF 70.4 KB
MPE Calculation 1RF Exposure Info2004-09-27PDF 71.1 KB
MPE Calculation 2RF Exposure Info2004-09-27PDF 70.8 KB
Block Diagram Metadata onlyBlock DiagramPDF 81.8 KB
Schematics Metadata onlySchematicsPDF 305.3 KB
Antenna Data Metadata onlyOperational DescriptionPDF 1.2 MB
Circuit Description Metadata onlyOperational DescriptionPDF 81.8 KB
Internal Ant Spec Metadata onlyOperational DescriptionPDF 741.2 KB
connectorspecs Metadata onlyOperational DescriptionPDF 878 KB

Application Information

Application IDZHomP8i6rEN8/LR01bPqww==
Final Action Date2005-02-04
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019588359
ModelRBTBHR2W
Frequency Range2400-2483.5 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless LAN Card
Responsible PartyThomas Whissel, Regulatory Compliance Manager, whissel@Extremenetworks.com , +1-603-952-5861
Test FirmDori Robertson, BUREAU VERITAS CONSUMER PRODUCTS SERVICES, INC., dolores.robertson@us.bureauveritas.com , 978 486 8880
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing to add external antennas for outdoor installations only. Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If parabolic antenna is used, a minimum separation distance of 28cm is required. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ. Operation in the 5.15-5.25 GHz band is restricted to indoors.

Applications

Application IDDatePurpose
ZHomP8i6rEN8/LR01bPqww==2005-02-04Class II permissive change or modification of presently authorized equipment
Ukwz7DugJd08VmP0BngXiw==2005-02-04Class II permissive change or modification of presently authorized equipment
xn1Yro3OCrEDTGwyJlgt9Q==2004-09-27Original Equipment
rzjIstN6K6gMLyC0oOEKZA==2004-09-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2400-2483.5 MHz0.033000015CCC
5150-5350 MHz0.00915ECC
5725-5825 MHz0.00915ECC

Grants

TCB Grant - Application ZHomP8i6rEN8/LR01bPqww==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 02/04/2005

Application Dated: 02/04/2005
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2400.0  -  2483.5 0.033  

Class II permissive change filing to add external antennas for outdoor installations only.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If parabolic antenna is used, a minimum separation distance of 28cm is required. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

Operation in the 5.15-5.25 GHz band is restricted to indoors.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZHomP8i6rEN8/LR01bPqww==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 02/04/2005

Application Dated: 02/04/2005
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2400.0  -  2483.5 0.033  

Class II permissive change filing to add external antennas for outdoor installations only.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If parabolic antenna is used, a minimum separation distance of 28cm is required. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

Operation in the 5.15-5.25 GHz band is restricted to indoors.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application xn1Yro3OCrEDTGwyJlgt9Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/27/2004

Application Dated: 09/27/2004
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2400.0  -  2483.5 0.033  

Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application xn1Yro3OCrEDTGwyJlgt9Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 09/27/2004

Application Dated: 09/27/2004
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless LAN Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2400.0  -  2483.5 0.033  

Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Ukwz7DugJd08VmP0BngXiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 02/04/2005

Application Dated: 02/04/2005
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.009  
CC 15E 5725.0  -  5825.0 0.009  

Class II permissive change filing to add external antennas for outdoor installations only.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If parabolic antenna is used, a minimum separation distance of 28cm is required. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

Operation in the 5.15-5.25 GHz band is restricted to indoors.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Ukwz7DugJd08VmP0BngXiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 02/04/2005

Application Dated: 02/04/2005
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.009  
CC 15E 5725.0  -  5825.0 0.009  

Class II permissive change filing to add external antennas for outdoor installations only.

Power output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. If parabolic antenna is used, a minimum separation distance of 28cm is required. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

Operation in the 5.15-5.25 GHz band is restricted to indoors.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application rzjIstN6K6gMLyC0oOEKZA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/27/2004

Application Dated: 09/27/2004
Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Card
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.009  
CC 15E 5725.0  -  5825.0 0.009  

Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application rzjIstN6K6gMLyC0oOEKZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extreme Networks, Inc.
6480 Via Del Oro
San Jose, CA 95119
United States
  Date of Grant: 09/27/2004

Application Dated: 09/27/2004
 
Attention: Thomas Whissel , Regulatory Compliance Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  QXO-RBTBHR2W
Name of Grantee:  Extreme Networks, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless LAN Card
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5150.0  -  5350.0 0.009  
CC 15E 5725.0  -  5825.0 0.009  

Power output listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device is only for use within wireless LAN access point model RBTRC-MZ.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: