AP6234E WLAN module RF Exposure Info RF Exp Appendix C Getac Technology Corporation

Getac Technology Corporation WLAN module

FCC ID Filing: QYLAP6234E
Purchase on Amazon: WLAN module

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of AP6234E WLAN module RF Exposure Info RF Exp Appendix C Getac Technology Corporation

Calibration Laboratory of
Schmid & Partner
Engineering AG
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
Schweizerischer Kalibrierdienst
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Sporton-TW (Auden)
Certificate No:
D2450V2-926_Jul16
CALIBRATION CERTIFICATE
Object
D2450V2 - SN:926
Calibration procedure(s)
QA CAL-05.v9
Calibration procedure for dipole validation kits above 700 MHz
Calibration date:
July 25, 2016
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI}.
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3}°C and humidity < 70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
ID#
Cal Date (Certificate No.)
Scheduled Calibration
Power meter NRP
SN: 104778
SN: 103244
06-Apr-16 (No. 217-02288/02289)
Apr-17
Power sensor NRP-Z91
06-Apr-16 (No. 217-02288)
Apr-17
Power sensor NRP-Z91
SN: 103245
06-Apr-16 (No. 217-02289)
Reference 20 dB Attenuator
SN: 5058 (20k)
SN: 5047.2 I 06327
05-Apr-16 (No. 217-02292)
Apr-17
Apr-17
Type-N mismatch combination
05-Apr-16 (No. 217-02295)
Apr-17
Reference Probe EX3DV4
SN: 7349
DAE4
SN: 601
15-Jun-16 (No. EX3-7349_Jun16)
30-Dec-15 (No. DAE4-601_Dec15)
Jun-17
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-15 (No. 217-02222)
In house check: Oct-16
07-0ct-15 (No. 217-02222)
In house check: Oct-16
Power sensor HP 8481A
Power sensor HP 8481A
SN: US37292783
SN: MY41092317
RF generator R&S SMT-06
SN: 100972
Network Analyzer HP 8753E
SN: US37390585
Dec-16
07-0ct-15 (No. 217-02223)
In house check: Oct-16
15-Jun-15 (in house check Jun-15)
18-0ct-01 (in house check Oct-15)
In house check: Oct-16
In house check: Oct-16
Name
Function
Signature
Calibrated by:
Michael Weber
Laboratory Technician
II&-
Approved by:
Katja Pokovic
Technical Manager
~ArIssued: July 26, 2016
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: D2450V2-926_ Jul16
Page 1 of 8
Calibration Laboratory of
Schmid & Partner
Engineering AG
Zeughausstrasse 43, 8004 Zurich, Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Swiss Calibration Service
Accreditatio n No.:
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-201 3, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-1, "Procedure to measure the Specific Absorption Rate (SAR) for hand-held
devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)",
February 2005
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)" , March 2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
e) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. T he impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, norma lized to an input power of 1 W at the antenna
connector.
• SAR tor nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D2450V2-926_Jul16
Page 2 of 8
Measurement Conditions
DASY system conf1guration, as ar as not セ@ iven on paqe 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
V52.8.8
Modular Flat Phantom
Phantom
with Spacer
10 mm
Distance Dipole Center - TSL
Zoom Scan Resolution
dx, dy, dz = 5 mm
Frequency
2450 MHz ± 1 MHz
Head TSL parameters
The following parameters and calculations were applied
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
39.2
1.80 mho/m
(22.0 ± 0.2) °C
38.0 ±6 %
1.86 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Head TSL
Condition
SAR averaged over 1 cm (1 g) of Head TSL
SAR measured
250 mW input power
13.5 W/kg
normalized to 1W
52.8 W/kg ± 17.0 % {k=2)
SAR for nominal Head TSL parameters
condition
SAR averaged over 10 cm (10 g) of Head TSL
SAR measured
250 mW input power
6.22 W/kg
normalized to 1W
24.5 W/kg ± 16.5 % (k=2)
SAR for nominal Head TSL parameters
Body TSL parameters
The foII owing parameters and ca culations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
52.7
1.95 mho/m
(22.0 ± 0.2) °C
51.8±6%
2.03 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D2450V2-926_Jul16
Condition
250 mW input power
13.1 W/kg
normalized to 1W
51.2 W/kg ± 17.0 % {k=2)
condition
250 mW input power
6.07 W/kg
normalized to 1W
24.0 W/kg ± 16.5 % (k=2)
Page 3 of 8
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL
54.3 Q + 3.7 jQ
Impedance, transformed to feed point
- 25.3 dB
Return Loss
Antenna Parameters with Body TSL
50.3 Q + 5.0 jQ
Impedance, transformed to feed point
- 26.0 dB
Return Loss
General Antenna Parameters and Design
1.155 ns
Electrical Delay (one direction)
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semi rigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
September 26, 2013
Certificate No: D2450V2-926_Jul16
Page 4 of 8
DASY5 Validation Report for Head TSL
Date: 25.07.2016
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:926
Communication System: UID O - CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; cr = 1.86 S/m; er = 38; p = l 000 kg/m
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-201 l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(7.72, 7.72, 7.72); Calibrated: 15.06.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 30.12.2015
•
Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001
•
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372)
Dipole Calibration for Head Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = J 14.2 V/m; Power Drift= 0.01 dB
Peak SAR (extrapolated) = 27 .6 W /kg
SAR(l g) = 13.5 W/kg; SAR(lO g) = 6.22 W /kg
Maximum value of SAR (measured) = 22.3 W/kg
dB
-4.64
-9.29
-13.93
-18.58
-23.22
0 dB = 22.3 W/kg = 13.48 dBW/kg
Certificate No: 02450V2-926_Jul16
Page 5 of 8
Impedance Measurement Plot for Head TSL
25 Jul 2016
セ@
S11
1: 54.313
1 U FS
セ@
3. 7266
セ@
242.08 pH
09:58:38
2 450. 000 000 MHz
Del
Avg
16
Hld
CH2
S11
5 dB i REF - 2 0~dB
--.-
LOG
,-
Ce
セ@
Hl d
-+-
--+- - - + - - - - <
-·-
STOP 2 650.000 000 MHz
START 2 250.000 000 MH z
Certificate No: D2450V2-926_Jul16
Page 6 of 8
DASY5 Validation Report for Body TSL
Date: 25.07.2016
Test Laboratory: SPEAG, Zurich, Switzerland
OUT: Dipole 2450 MHz D2450V2; Type: D2450V2; Serial: D2450V2 - SN:926
Communication System: UID O - CW; Frequency: 2450 MHz
Medium parameters used: f = 2450 MHz; cr = 2.03 Sim; Er= 51 .8; p = 1000 kg/m
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEE/IEC/ANSI C63.19-2011)
DASY52 Configuration:
•
Probe: EX3DV4 - SN7349; ConvF(7.79, 7.79, 7 .79); Calibrated: 15.06.2016;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 30.12.2015
•
Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002
•
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372)
Dipole Calibration for Body Tissue/Pin=250 mW, d=lOmm/Zoom Scan (7x7x7)/Cube 0:
Measurement grid: dx=5mm, dy=5mm, dz=5mm
Reference Value = 107.2 V/m; Power Drift = -0.04 dB
Peak SAR (extrapolated) = 26.3 W /kg
SAR(l g) =13.1 W/kg; SAR(lO g) =6.07 W/kg
Maximum value of SAR (measured) = 21.4 W/kg
dB
-4.38
-8.76
-13.14
-17.52
-21.90
0 dB = 21.4 W/kg = 13.30 dBW/kg
Certificate No: 02450V2-926_J ul16
Page 7 of 8
Impedance Measure ment Plot for Body TSL
igm S11
1: 50. 256
1 U FS
!'l
5.0469
!'l
25 Jul 2016 09:58: 03
2 450.000 000 MHz
327.85 pH
De l
Ct
Av9
セ@
セ
16
Hld
CH2
S 11
LOG
-5
1:-2 5.96 2 dB
d Bi REF -20 dB
2 j50.000.,.000 MH z
,.
セ@
Ct
Hl d
--l
---- --~
STOP 2 650. 000 000 MHz
START 2 250. 000 000 MH z
Certificate No: D2450V2-9 26_Jul16
Page 8 of 8
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d 'etalonnage
Zeughausstrasse 43, 8004 Zurich, Switzerland
Swiss Calibration Service
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
Servizio svizzero di taratura
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Client
Auden
Certificate No:
D5GHzV2-1040_Jun16
CALIBRATION CERTIFICATE
Object
D5GHzV2 - SN:1040
Calibration procedure(s)
QA CAL-22.v2
Calibration procedure for dipole validation kits between 3-6 GHz
Calibration date:
June 17, 2016
This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (SI).
The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature (22 ± 3)°C and humidity < 70%.
Calibration Equipment used (M& TE critical for calibration)
Primary Standards
ID#
Cal Date (Certificate No.)
Scheduled Calibration
Power meter NRP
SN: 104778
Apr-17
Power sensor NRP-Z91
SN: 103244
06-Apr-16 (No. 217-02288/02289)
06-Apr-16 (No. 217-02288)
Power sensor NRP-Z91
SN: 103245
06-Apr-16 (No. 217-02289)
Apr-17
Apr-17
Apr-17
Reference 20 dB Attenuator
SN: 5058 (20k)
05-Apr-16 (No. 217-02292)
Type-N mismatch combination
Reference Probe EX3DV4
SN: 5047.2 / 06327
05-Apr-16 (No. 217-02295)
Apr- 17
SN: 3503
31-Dec-15 (No. EX3-3503_Dec15)
Dec-16
DAE4
SN: 601
30-Dec-15 (No. DAE4-601 _Dec15)
Dec-16
Secondary Standards
ID#
Check Date (in house)
Scheduled Check
Power meter EPM-442A
SN: GB37480704
07-0ct-15 (No. 217 -02222)
In house check: Oct-16
Power sensor HP 8481A
SN: US37292783
07-0ct-15 (No. 217-02222)
In house check: Oct-16
Power sensor HP 8481A
SN: MY41092317
07-0ct-15 (No. 217-02223)
In house check: Oct-16
RF generator R&S SMT -06
SN: 100972
15-Jun-15 (in house check Jun-15)
In house check: Oct-16
Network Analyzer HP 8753E
SN: US37390585
18-0ct-01 (in house check Oct-15)
In house check: Oct-16
Name
Function
Calibrated by:
Jeton Kastrati
Laboratory Technician
Approved by:
Katja Pokovic
Technical Manager
Signature
セ@
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: D5GHzV2-1040_Jun16
Page 1 of 16
Issued: June 20, 2016
Calibration Laboratory of
Schmid & Partner
Engineering AG
Schweizerischer Kalibrierdienst
Service suisse d'etalonnage
Servizio svizzero di taratura
Zeughausstrasse 43, 8004 Zurich , Switzerland
Accredited by the Swiss Accreditation Service (SAS)
Accreditation No.:
Swiss Cal ibration Service
SCS 0108
The Swiss Accreditation Service is one of the signatories to the EA
Multilateral Agreement for the recognition of calibration certificates
Glossary:
TSL
ConvF
N/A
tissue simulating liquid
sensitivity in TSL / NORM x,y,z
not applicable or not measured
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak SpatialAveraged Specific Absorption Rate (SAR) in the Human Head from Wireless
Communications Devices: Measurement Techniques", June 2013
b) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless
communication devices used in close proximity to the human body (frequency range of 30
MHz to 6 GHz)" , March 2010
c) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Additional Documentation:
d) DASY4/5 System Handbook
Methods Applied and Interpretation of Parameters:
• Measurement Conditions: Further details are available from the Validation Report at the end
of the certificate. All figures stated in the certificate are valid at the frequency indicated.
• Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed
point exactly below the center marking of the flat phantom section, with the arms oriented
parallel to the body axis.
• Feed Point Impedance and Return Loss: These parameters are measured with the dipole
positioned under the liquid filled phantom. The impedance stated is transformed from the
measurement at the SMA connector to the feed point. The Return Loss ensures low
reflected power. No uncertainty required.
• Electrical Delay: One-way delay between the SMA connector and the antenna feed point.
No uncertainty required.
• SAR measured: SAR measured at the stated antenna input power.
• SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna
connector.
• SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the
nominal SAR result.
The reported uncertainty of measurement is stated as the standard uncertainty of measurement
multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage
probability of approximately 95%.
Certificate No: D5GHzV2-1040_Jun1 6
Page2of16
Measurement Conditions
DAS y system confiquration, as far as not ( iven on page 1.
DASY Version
DASY5
Extrapolation
Advanced Extrapolation
Phantom
Modular Flat Phantom V5.0
Distance Dipole Center - TSL
Zoom Scan Resolution
V52.8.8
10 mm
with Spacer
dx, dy = 4.0 mm, dz = 1.4 mm
Graded Ratio = 1.4 (Z direction)
Frequency
5200
5300
5500
5600
5800
MHz
MHz
MHz
MHz
MHz
1 MHz
1 MHz
1 MHz
1 MHz
+ 1 MHz
±
±
±
±
Head TSL parameters at 5200 MHz
The followinq parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22 .0 °c
36.0
4.66 mho/m
(22.0 ± 0.2) °C
34.8 ± 6 %
4.54 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Head TSL at 5200 MHz
SAR averaged over 1 cm3 (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 1Ocm 3 (10 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1040_Jun1 6
Condition
100 mW input power
7.68 W/kg
normalized to 1W
76.2 W/kg: 19.9 % (k=2)
condition
100 mW input power
2.21 W/kg
normalized to 1W
21.9 W/kg ± 19.5 % (k=2)
Page 3 of 16
Head TSL parameters at 5300 MHz
Th e foII owrng
. parameters an d ca Icu Iat1ons
were app r1ed
Temperatur e
Permittivity
Conductivit y
22.0 °c
35.9
4.76 mho/m
(22.0 ± 0.2) c
34.6 ±6 %
4.64 mho/m ± 6 %
< 0.5 °C
----
·---
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
SAR result with Head TSL at 5300 MHz
SAR averaged over 1 cm3 (1 g) of Head TSL
Condition
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 10 cm 3 (1 O g) of Head TSL
SAR measured
100 mW input power
8.24 W/kg
normalized to 1W
81.7 W /kg± 19.9 % (k=2)
condition
100 mW input power
2.36 W/kg
normalized to 1W
23.3 W/kg ± 19.5 % (k=2)
SAR for nominal Head TSL parameters
Head TSL parameters at 5500 MHz
Th e fo II owrng
. parameters and caIcu Iat1ons
r d
were app11e
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperatur e
Permittivity
Conductivit y
22.0 °c
35.6
4.96 mho/m
(22.0 ± 0.2) 0 c
34.3 ± 6 %
4.83 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Head TSL at 5500 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
Condition
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 1O cm3 (1 O g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1040_Jun16
100 mW input power
7 .93 W /kg
normalized to 1W
78.6 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.26 W/kg
normalized to 1W
22.4 W/kg ± 19.5 % (k=2)
Page 4 of 16
Head TSL parameters at 5600 MHz
Th e followinQ parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Temperature
Permittivity
Conductivity
22.0 °c
35.5
5.07 mho/m
(22 .0 ± 0.2) c
34.2 ±6 %
4.93 mho/m ± 6 %
< 0.5 °c
----
----
Head TSL temperature change during test
SAR result with Head TSL at 5600 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
Condition
100 mW input power
8.12 W/kg
normalized to 1W
80.5 W/kg ± 19.9 % (k=2)
SAR for nominal Head TSL parameters
SAR averaged over 10 cm3 (1 O g) of Head TSL
SAR measured
condition
100 mW input power
2.32 W/kg
normalized to 1W
22.9 W/kg ± 19.5 % (k=2)
SAR for nominal Head TSL parameters
Head TSL parameters at 5800 MHz
The following parameters and calculations were applied.
Nominal Head TSL parameters
Measured Head TSL parameters
Head TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °c
35.3
5.27 mho/m
(22.0 ± 0.2) °C
33.9 ± 6 %
5.14 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Head TSL at 5800 MHz
SAR averaged over 1 cm 3 (1 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
SAR averaged over 10 cm 3 (10 g) of Head TSL
SAR measured
SAR for nominal Head TSL parameters
Certificate No: D5GHzV2-1040_Jun1 6
Condition
100 mW input power
7 .66 W/kg
normalized to 1W
75.9 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.19 W/kg
normalized to 1W
21.7 W/kg ± 19.5 % (k=2)
Page 5 of 16
Body TSL parameters at 5200 MHz
. parameters and calculations were applied.
Th e f oII owing
Nominal Body TSL parameters
Measured Body TSL parameters
Temperature
Permittivity
Conductivity
22.0 °C
49.0
5.30 mho/m
47.1±6 %
5.41 mho/m ± 6 %
----
----
(22.0 ± 0.2)
Body TSL temperature change during test
< 0.5 °C
SAR result with Body TSL at 5200 MHz
SAR averaged over 1 cm3 (1 g) of Body TSL
SAR measured
Condition
100 mW input power
7.35 W/kg
normalized to 1W
72.9 W/kg ± 19.9 % (k=2)
SAR for nominal Body TSL parameters
SAR averaged over 10 cm 3 (1 O g) of Body TSL
SAR measured
condition
100 mW input power
2.07 W/kg
normalized to 1W
20.5 W/kg ± 19.5 % (k=2)
SAR for nominal Body TSL parameters
Body TSL parameters at 5300 MHz
Th e foII owing
. parameters and ca Icu Iat,ons
were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.9
5.42 mho/m
46.9 ± 6 %
5.53 mho/m ± 6 %
----
----
(22.0 ± 0.2)
< 0.5 °C
SAR result with Body TSL at 5300 MHz
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1040_Jun 16
Condition
100 mW input power
7.70 W/kg
normalized to 1W
76.4 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.16 W/kg
normalized to 1W
21.4 W/kg ± 19.5 % (k=2)
Page 6 of 16
Body TSL parameters at 5500 MHz
Th e fo II owinq
. parameters and calculations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Temperature
Permittivity
Conductivity
22.0 °c
48.6
5.65 mho/m
(22.0 ± 0.2) c
46.5 ± 6 %
5.80 mho/m ± 6 %
< 0.5 °C
----
----
Body TSL temperature change during test
SAR result with Body TSL at 5500 MHz
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
Condition
100 mW input power
7.92 W/kg
normalized to 1W
78.6 W/kg ± 19.9 % (k=2)
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (1 O g) of Body TSL
SAR measured
condition
100 mW input power
2.19W/kg
normalized to 1W
21.7 W/kg ± 19.5 % (k=2)
SAR for nominal Body TSL parameters
Body TSL parameters at 5600 MHz
T he followinq parameters and calculations were applied.
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22 .0 °C
48.5
5.77 mho/m
(22.0 ± 0.2) °C
46.3 ±6 %
5.95 mho/m ± 6 %
< 0.5 °c
----
----
SAR result with Body TSL at 5600 MHz
SAR averaged over 1 cm 3 (1 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 1O cm 3 (1 O g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: D5GHzV2-1040_Jun1 6
Condition
100 mW input power
7.90 W/kg
normalized to 1W
78.4 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.21 W/kg
normalized to 1W
21.9 W/kg ± 19.5 % (k=2)
Page7of1 6
Body TSL parameters at 5800 MHz
Th e fo II owm_g
. parame ers an d ca Icu Ia ions were app r1ed
Nominal Body TSL parameters
Measured Body TSL parameters
Body TSL temperature change during test
Temperature
Permittivity
Conductivity
22.0 °C
48.2
6.00 mho/m
(22.0 ± 0.2) °C
46.0 ± 6 %
6.23 mho/m ± 6 %
< 0.5 °C
----
----
SAR result with Body TSL at 5800 MHz
SAR averaged over 1 cm 3 (1 g) of Body TSL
Condition
SAR measured
SAR for nominal Body TSL parameters
SAR averaged over 10 cm 3 (10 g) of Body TSL
SAR measured
SAR for nominal Body TSL parameters
Certificate No: 05GHzV2-1040_Jun16
100 mW input power
7.58 W/kg
normalized to 1W
75.2 W/kg ± 19.9 % (k=2)
condition
100 mW input power
2.10 W/kg
normalized to 1W
20.8 W/kg ± 19.5 % (k=2)
Page 8 of 16
Appendix (Additional assessments outside the scope of SCS 0108)
Antenna Parameters with Head TSL at 5200 MHz
Impedance , transformed to feed point
50.2 Q - 8.5 jQ
Return Loss
- 21.4 dB
Antenna Parameters with Head TSL at 5300 MHz
Impedance, transformed to feed point
47.8 Q - 3.3 jQ
Return Loss
- 27.8 dB
Antenna Parameters with Head TSL at 5500 MHz
Impedance, transformed to feed point
50.0 Q - 5.9 jQ
Return Loss
- 24.6 dB
Antenna Parameters with Head TSL at 5600 MHz
Impedance, transformed to feed point
56.4 Q - 3.3 jQ
Return Loss
- 23.3 dB
Antenna Parameters with Head TSL at 5800 MHz
Impedance, transformed to feed point
54.3 Q - 2.3 jQ
Return Loss
- 26.6 dB
Antenna Parameters with Body TSL at 5200 MHz
Impedance, transformed to feed point
50.7 Q - 7.0 jQ
- 23.2 dB
Return Loss
Antenna Parameters with Body TSL at 5300 MHz
Impedance, transformed to feed point
48.6 Q - 1.6 jQ
- 33.4 dB
Return Loss
Antenna Parameters with Body TSL at 5500 MHz
50.3 Q - 4.4 jQ
Impedance , transformed to feed point
Return Loss
Certificate No: D5GHzV2-1040_Jun1 6
- 27.2 dB
Page 9 of 16
Antenna Parameters with Body TSL at 5600 MHz
Impedance, transformed to feed point
57.9 Q - 2.3 jQ
Return Loss
- 22.4 dB
Antenna Parameters with Body TSL at 5800 MHz
Impedance, transformed to feed point
54.6 Q - 0.7 jQ
Return Loss
- 27.0 dB
General Antenna Parameters and Design
Electrical Delay (one direction)
1.203 ns
After long term use with 1OOW radiated power, only a slight warming of the dipole near the feedpoint can be measured.
The dipole is made of standard semi rigid coaxial cable. The center conductor of the feeding line is directly connected to the
second arm of the dipole. The antenna is therefore short-circuited for DC-signals. On some of the dipoles, small end caps
are added to the dipole arms in order to improve matching when loaded according to the position as explained in the
"Measurement Conditions" paragraph. The SAR data are not affected by this change. The overall dipole length is still
according to the Standard.
No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the
feedpoint may be damaged.
Additional EUT Data
Manufactured by
SPEAG
Manufactured on
December 30, 2005
Certificate No: D5GHzV2-1040_Jun 16
Page 10 of 16
DASY5 Validation Report for Head TSL
Date: 17.06.2016
Test Laboratory: SPEAG, Zurich, Switzerland
DUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN: 1040
Communication System: UID O - CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500
MHz, Frequency: 5600 MHz, Frequency: 5800 MHz
Medium parameters used: f = 5200 MH z; 0 = 4.54 Sim; Er= 34.8; p = 1000 kglm 3 , Medium parameters
used: f = 5300 MHz; 0 = 4.64 Sim; Er = 34.6; p = 1000 kglm 3 , Medium parameters used: f = 5500 MHz; 0 =
4.83 Sim; Er= 34.3; p = 1000 kglm 3 , Medium parameters used: f = 5600 MHz; 0 = 4.93 Sim; Er= 34.2; p =
1000 kglm 3 , Medium parameters used: f = 5800 MHz; 0 = 5.14 Sim; Er= 33.9; p = 1000 kglm 3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEEIIECIANSI C63.J9-201 l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN3503; ConvF(5.59, 5.59, 5.59); Calibrated: 31.12.2015, ConvF(5.25, 5.25,
5.25); Calibrated: 31.12.2015, ConvF(5.l8, 5.18, 5.18); Calibrated: 31.12.2015, ConvF(4.99, 4.99,
4.99); Calibrated: 31.12.2015, ConvF(4.95, 4.95, 4.95); Calibrated: 31.12.2015;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601 ; Calibrated: 30.12.2015
•
Phantom: Flat Phantom 5.0 (front); Type: QD000P50AA; Serial: 1001
•
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372)
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5200 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 70.41 Vim ; Power Drift= -0.04 dB
Peak SAR (extrapolated)= 27.7 Wlkg
SAR(l g) =7.68 Wlkg; SAR(lO g) = 2.21 W/kg
Maximum value of SAR (measured)= 17.3 W/kg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5300 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value = 72.35 VIm; Power Drift = -0.09 dB
Peak SAR (extrapolated)= 30.6 Wlkg
SAR(l g) = 8.24 W/kg; SAR(lO g) = 2.36 W/kg
Maximum value of SAR (measured) = 18.8 Wlkg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5500 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 70.02 Vim; Power Drift= -0.09 dB
Peak SAR (extrapolated)= 30.8 Wlkg
SAR(l g) =7.93 W/kg; SAR(lO g) = 2.26 W/kg
Max imum value of SAR (measured)= 18.5 Wlkg
Certificate No: D5GHzV2-1040_Jun1 6
Page 11 of 16
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 71.08 V/m; Power Drift= -0.06 dB
Peak SAR (extrapolated)= 31.5 W/kg
SAR(l g) =8.12 W/kg; SAR(lO g) =2.32 W/kg
Maximum value of SAR (measured) = 19.0 W/kg
Dipole Calibration for Head Tissue/Pin=lOOmW, dist=lOmm, f=5800 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz= 1.4mm
Reference Value= 67.92 V/m ; Power Drift= -0.07 dB
Peak SAR (extrapolated)= 31.4 W/kg
SAR(l g) =7.66 W/kg; SAR(lO g) =2.19 W/kg
Maximum value of SAR (measured) = 18.4 W /kg
dB
-5.00
-10.00
-15.00
-20.00
-25.00
0 dB= 17.3 W/kg = 12.38 dBW/kg
Certificate No: D5GHzV2-1040_Jun 16
Page 12 of 16
Impedance Measurement Plot for Head TSL
[!ill S11
1 U FS
1 : 50. 234 f1
- ---.-- ·-.
-8.5449 !'I
_.-·
17 Jun 20H, 15:44: 03
3 .5819 pF
S 200. 000 000 MHz
Del
~-,
~\
Cor
2 : 47. 8 2 0 !'I
-3.3457 n
5. 3 0000 GHz
J;;~'
CH1 Markers
3 : 49. 994 !'I
- 5. 8 750 n
5.50000 GHz
-- -I
4 : 5E.. 4 3 6 n
-3.2754 !'I
5. 60000 GHz
5 : 54.309 !'I
- 2. 3 008 !'I
5.80000 GHz
Hid
CH2
S 11
LOG
5 d B/ REF - 2 0 d B
1' - 21 420 dB · -.----'
5 200 0 00 000 MH z
1--
Cor
セ@
2:- 27. 827 dB
5. 3 0000 GH z
,.,
-~
セ@
'\
I~
セ@
セ@
i'
--...
tr
,,,,,---
3 :-2 4. 646 dB
5 . 50000 GH z
セ@
4 :- 23, 345 dB
5. E.000 0 GH z
5 :-2&. E.10 dB
5. 80000 GH z
Hld
--
START 5 000. 000 000 MHz
Certificate No: D5GHzV2-1040_Jun16
CH2 Markers
S TOP E, 000.000 000 MHz
Page 13 of 16
DASYS Validation Report for Body TSL
Date: 16.06.2016
Test Laboratory: SPEAG, Zurich, Switzerland
OUT: Dipole D5GHzV2; Type: D5GHzV2; Serial: D5GHzV2 - SN: 1040
Communication System: UID O - CW; Frequency: 5200 MHz, Frequency: 5300 MHz, Frequency: 5500
MHz, Frequency: 5600 MHz, Frequency: 5800 MHz
Medium parameters used: f = 5200 MHz; cr = 5.41 Sim; Er= 47 .1; p = 1000 kglm 3 , Medium parameters
used: f = 5300 MHz; cr = 5.53 Sim; Er = 46.9; p = 1000 kglm3 , Medium parameters used: f = 5500 MHz; cr =
5.8 Sim; er = 46.5; p = 1000 kglm 3 , Medium parameters used: f = 5600 MHz; cr = 5.95 Sim; Er= 46.3; p =
1000 kglm 3 , Medium parameters used: f = 5800 MHz; cr = 6.23 Sim; Er= 46; p = 1000 kglm 3
Phantom section: Flat Section
Measurement Standard: DASY5 (IEEEIIECI ANSI C63. l 9-20 l l)
DASY52 Configuration:
•
Probe: EX3DV4 - SN3503; ConvF(4.99, 4.99, 4.99); Calibrated: 31.12.2015, ConvF(4.75, 4.75 ,
4.75); Calibrated: 3 l. l 2.2015, ConvF(4.4, 4.4, 4.4); Calibrated: 31.12.2015, ConvF(4.35, 4.35, 4.35);
Calibrated: 31.12.2015, ConvF(4.27, 4.27, 4.27); Calibrated: 31. 12.2015 ;
•
Sensor-Surface: 1.4mm (Mechanical Surface Detection)
•
Electronics: DAE4 Sn601; Calibrated: 30.12.2015
•
Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002
•
DASY52 52.8.8(1258); SEMCAD X 14.6.10(7372)
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5200 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz= 1.4mm
Reference Value= 66.34 Vim; Power Drift= -0.03 dB
Peak SAR (extrapolated)= 27.4 Wlkg
SAR(l g) = 7.35 W/kg; SAR(lO g) = 2.07 W/kg
Maximum value of SAR (measured)= 16.8 Wlkg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5300 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz=l.4mm
Reference Value= 68.02 Vim; Power Drift= -0.04 dB
Peak SAR (extrapolated)= 29.2 Wlkg
SAR(l g) = 7.7 W/kg; SAR(lO g) = 2.16 W/kg
Maximum value of SAR (measured)= 17.6 Wlkg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=SSOO MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz= 1.4mm
Reference Value= 67.81 Vim; Power Drift= -0.04 dB
Peak SAR (extrapolated) = 31.7 Wlkg
SAR(l g) = 7.92 W/kg; SAR(lO g) = 2.19 W/kg
Maximum value of SAR (measured) = 18.6 W/kg
Certificate No: D5GHzV2-1040_Jun16
Page 14 of 16
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5600 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm, dy=4mm, dz= 1.4mm
Reference Value= 67.28 V/m; Power Drift= -0.03 dB
Peak SAR (extrapolated)= 32.5 W/kg
SAR(l g) = 7.9 W/kg; SAR(lO g) = 2.21 W/kg
Maximum value of SAR (measured)= 18.6 W/kg
Dipole Calibration for Body Tissue/Pin=lOOmW, dist=lOmm, f=5800 MHz/Zoom Scan,
dist=l.4mm (8x8x7)/Cube 0: Measurement grid: dx=4mm , dy=4mm, dz= 1.4mm
Reference Value= 65.14 V/m; Power Drift= -0.03 dB
Peak SAR (extrapolated)= 32.9 W/kg
SAR(l g) = 7.58 W/kg; SAR(lO g) = 2.1 W/kg
Maximum value of SAR (measured) = 18.3 W/kg
dB
-5. 00
-10.00
-15.00
-20.00
-25.00
0 dB= 16.8 W/kg = 12.25 dBW/kg
Certificate No: D5GHzV2-1040_Jun16
Page 15 of 16
Impedance Measurement Plot for Body TSL
IIBIJ
S:11
1 U FS
1: 50.721 n
-6.9512 n
-r- -
16 Jun 2016 11:16:04
4.4031 pF
5 200.000 000 MHz
Del
CH1 Markers
- l --
2: 48.635 n
-1. 5 93 8 n
5.30000 GHz
Cor·
Avg
.J
セ@
3: 5 0.26€, n
-4. 3613 (t
5.50000 GHz
セ@
-- JI
セ@
16
4: 57.877 n
- 2 . 3262 n
5.60000 GHz
5: 54. 607 n
-716.80 mn
5.80000 GHz
セ@
--
Hld
CH2
S11
LO G
5 dB/ REF - 2 0 dB
--+I
5 200 0 00 0 00 MH z
CH 2 Mar k ers
セ@
1·-23 194 d B
Cor
~ J.~ __ , J
2:-33. 441 d B
5. 3 000 0 GH z
--........ 7'--,.
Av9
16
II
'---l. セ@
_L-,
_l.
' "- / ,
r"
2j
Hid
_J_
STA RT 5 000. 000 000 MHz
Certificate No: D5GHzV2-1040_Jun1 6
セ@
STOP
Page 16 of 16
E,
000. 000 000 MHz
3:- 27. 221 dB
5. 5000 0 GHz
4:-22.36 7 dB
5. 60000 GHz
5:- 27. 021 dB
5.80 0 00 GHz
.
In C IICI bcraM
NB セ
'I'll
=rTL!......p
e a YMセcnas
-CAUBRATION LABORATORY
ャMセZ[]
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Htto:llwww.chinattl.cn
...NセOQi |Nセ
'""-'./
.:p lIiAiiI
1i1i iA.
j'",
....セ
noitarXQlセ
Bi セL
CNAS l0510
Certificate No: Z16-97054
Audeo
Client
セB
CALIBRATION CERTIFICATE
Object
EX3DV4 - SN:3578
Calibration Procedure(s)
FD-Z11-2-004-01
Calibration Procedures for Dosimetric E-field Probes
Calibration date:
May 11, 2016
This calibration Certificate documents the traceability to national standards, which realize the physical units of
measurements(SI). The measurements and the uncertainties with confidence probability are given on the following
pages and are part of the certificate.
All calibrations have been conducted in the closed laboratory facility: environment temperature(22±3)O( and
humidity<70%.
Calibration Equipment used (M&TE critical for calibration)
Primary Standards
Power Meter
ID #
NRP2
Cal Date(Calibrated by, Certificate No.)
Scheduled Calibration
101919
01-Jul-15 (CTTL, No.J15X04256)
Jun-16
Power sensor NRP-Z91
Power sensor NRP-Z91
Reference10dBAttenuator
101547
101548
18N50W-10dB
01-Jul-15 (CTTL, No.J15X04256)
01-Jul-15 (CTTL, No.J15X04256)
13-Mar-16(CTTL,No.J16X01547)
Jun-16
Jun-16
Reference20dBAttenuator
Reference Probe EX3DV4
18N50W-20dB
SN 3617
13-Mar-16(CTTL, NO.J 16X01548)
26-Aug-15(SPEAG,No.EX3-3617_Aug15)
Mar-18
Aug-16
DAE4
SN 1331
21-Jan-16(SPEAG, No.DAE4-1331_Jan16)
Jan -17
Secondary Standards
ID #
Cal Date(Calibrated by, Certificate No.)
SignaiGeneratorMG3700A
Network Analyzer E5071C
6201052605
MY46110673
01-Jul-15 (CTTL, No.J15X04255)
26-Jan-16 (CTTL, No.J16X00894)
Name
Mar-18
Scheduled Calibration
Jun-16
Function
Jan -17
セエオイ・
Calibrated by:
Yu Zongying
SAR Test Engineer
Reviewed by:
Qi Dianyuan
SAR Project Leader
Approved by:
Lu Bingsong
Deputy Director of the laboratory
セ
bz Qヲセ
Issued: May 13,J016
This calibration certificate shall not be reproduced except in full without written approval of the laboratory.
Certificate No: Z16-97054
Page I of II
TTL
In r
lobara·o wi
L...P
9_ _
CAUSRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Http://www.chinattl.cn
Glossary:
TSL
NORMx,y,z
ConvF
DCP
CF
A,B,C,D
Polarization ¢
Polarization 8
tissue simulating liquid
sensitivity in free space
sensitivity in TSL / NORMx,y,z
diode compression point
crest factor (1/duty_cycle) of the RF signal
modulation dependent linearization parameters
¢ rotation around probe axis
8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i
8=0 is normal to probe axis
Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system
Calibration is Performed According to the Following Standards:
a) IEEE Std 1528-2013, "IEEE Recommended Practice for Determining the Peak Spatial-Averaged
Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices:
Measurement Techniques", June 2013
b) IEC 62209-1, "Procedure to measure the Specific Absorption Rate (SAR) for hand-held devices used
in close proximity to the ear (frequency range of 300M Hz to 3GHz)", February 2005
c) IEC 62209-2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication
devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March
2010
d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz"
Methods Applied and Interpretation of Parameters:
•
•
•
•
•
•
•
•
•
in TEM-cell; f>1800MHz: waveguide).
NORMx,y,z: Assessed for E-field polarization 8=0 HヲセYPi|ャQhコ
NORIVlx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not effect the
£2 -field uncertainty inside TSL (see below ConvF),
NORM(f)x,y,z = NORMx,y,z* frequency_response (see Frequency Response Chart). This
linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the
frequency response is included in the stated uncertainty of ConvF.
DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep
(no uncertainty required). DCP does not depend on frequency nor media.
PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal
characteristics.
Ax,y,z; Bx,y,z; Cx,y,z;VRx,y,z:A,B,C are numerical linearization parameters assessed based on the
data of power sweep for specific modulation signal. The parameters do not depend on frequency nor
media. VR is the maximum calibration range expressed in RMS voltage across the diode.
ConvF and Boundary Effect Parameters: Assessed in flat phantom using E-field (or Temperature
Transfer standard for ヲセXPmhコI
and inside waveguide using analytical field distributions based on
power measurements for f >800MHz. The same setups are used for assessment of the parameters
applied for boundary compensation (alpha, depth) of which typical uncertainty valued are given.
These parameters are used in DASY4 software to improve probe accuracy close to the boundary.
The sensitivity in TSL corresponds to NORMx,y,z* ConvF whereby the uncertainty corresponds to
that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which
allows extending the validity from±50MHz to±1 OOMHz.
Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat
phantom exposed by a patch antenna.
Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the
probe tip (on probe axis). No tolerance required.
Connector Angle: The angle is assessed using the information gained by determining the NORMx
(no uncertainty required).
Certificate No: Z16-97054
Page 2 of 11
In C Ilebrario wi
=rTL!...-p e a
9_ _
CALIBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Hnp:l/www.chinattl.cn
Frequency Response of E-Field
(TEM-Cell: ifi110 EXX, Waveguide: R22)
1.5
"C
Q)
1.4
セ
•
_ _ _ _ _ _ _ _ IL
___ •
,L.
•
,1
,L __ •
.1.
1.2
....
c 1.1
..
セ
- - - - - - - - t - _ - - -
->-
t - - __ - - - _ .. __ -
..I
..
.L
IL
,L.
, .
......
_ •
セ
セ
.LI
セ
•
•
- ..
I.
- -
__ .. _ -
•
......
•
セ
.L
..
I.
.L
•
.L1 _ •
.L
,L
..
•I
-',
-,1 __ •
- - __ 1__
...,
•
..
I __ •
...
セ
•
__
•
セ
•
•
•
•
•
•
------- -:-- -------- --.. --- -;. ----- -. -- -. ---- .------- -------- -------- ----. -- ------- -;- ----- -- - _. ---- -----. ----: -----. --; --------:-----_. -;- -.. ----: ----. ---: -. ------: ----. ---:.-----. -: --------:. -----..;---. ----1- -セ
C'I:S
- - - - - - .. - - - - - - - ->- - - _ - - - - -,- - - - - - - - ... - - - - - - - -
_ _ _ _ _ _ _ _ ,L.
1.3
セ
セ
セ
セ
セ
Mセ
セM
セ
•
•
•
- -. - - -- Mセ - - -- - -- -:-- --. - - - -7 - --. - - - セN - - - --. -{- -. - _. -. セ - - -. - - -. セ - - --. -- - セ -. - - - -. - セ - -- . - - - -:- . - - --.. セM - . - - -- . セN - -
---=te------!---------!---------!--------j--------!--------!--------t--------[---------i--------1--------j---
Q)
tJ)
::::::J,­::::_セZNGM Zセ ­oo-'-------- t -- ---- セ -ooo. -- T­­­­­­­; Mセ ­­: :;=;:oooo --oo -;- ---m-t moo-t-
- - - • - - - -r - - -. - - • - r • - •• - • - .,. - - - - • - -
c 1.0
0..
tJ)
Q)
....
セ
0.9
Q)
MエッNセィュ
-r - - - - • - - -,- - • - - - - -
T - - - - - - - - T - - - - _. - -
r • ­ ­ ­ ­ ­.
•
•
•
•
- - -- - - - -r- - -- - - - -r- - - --- - ....- - - - - - -1
j- - •• - - - - ,
• - - - • - - -
j- - - - -- - -, - 1
- - - - - ­T ­ ­ ­ ­ ­ ­ ­ ­ T ­ ­ ­ ­ ­ ­ ­
j - - - - - - - - ,
- - •
-r -. - - - -- -r- - - -- - - -,- - - - -- - ..... - - ---- - -, - -,
--------,.·-------,.--·-----,--------.,-------- . ------·-T-------- . ----.--- . ­.­­­­­­,..­­­­­­­­,­­­­­­­­.,­­­­­­­­"1.­-
0.8
•
•
0.7
•
•
- -
....
LL 0.6
•
•
__ .. __ •
•
•
•
­ ­ ­ · ­ ­ ­ ­ 1 ­ ­ ­ ­ ­ ­ ­ ­ ­ 1 ­ ­ ­ ­ ­ ­ ­ ­ ­ 1 ­ ­ ­ ­ ­ ­ ­ ­ ... ­ ­ ­ ­ ­ ­ ­ ­ .. ­ ­ ­ ­ ­ ­ ­ ­ . ­ ­ ­ ­ ­ ­ ­ ­ .. ­ ­ ­ ­ ­ ­ ­ ­ .. ­
0"
•
- - - - - - - -,.. - - - - - - - -,.. - - - - - - - - , - - - - - - - - , - - - - - - - - , - - - - - - - - .. - - - - - - - - y - - - - - - - -,. - • • - - - - -,. - - - - - - - -,- - - - - - - - . . , - - - - . ,
­ ­ ­ ­ ­ ­ ­ ­ ... ­ ­ ­ ­ ­ ­ ­ ­ 1 ­ ­ ­ ­ ­ ­ ­ ­ ­ 1 ­ · ­ ­ ­ ­ ­ ­ ... ­ ­ ­ ­ ­ ­ ­ ­ .. ­ ­ ­ ­ ­ · ­ ­ . ­
::J
•
- - ... - - - - -
Q)
________ I...
•
,­
1I
• __ -,1
JI
0.5
_ . - ... - - - - - - - -,. - - - - _ . _ ... _ - • • - - - - .. - - - - - . - - . - - - - - - - • • - - - _ . - - - ..
• __ • • • __ I.. _ .
• • _I..
I.
• __
.L
1­
, __ •
1­
,_.
...
•
­,
__ • •I
• __ .L __ •
セ
' I
.L
I • ,' ­ _ .
'"
•
-t
..
' "
I..
•
1L
1I..
•
...
•
TEM
f[MHz]
2000
2500
-.R22
Uncertainty of Frequency Response of E­field: ±7.5% (k=2)
Page 7 of II
• _1_.
•
...
'__
1500
. . . __
1000
.... _
...
500
­­"1­­-
...
E!3
Certificate No: Z16-97054
•• _
セ
•
..1
3000
=rTL
--
In Collabo 8 0 wi
§......P
9_ _
CAUBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Http://www.chinattl.cn
Receiving Pattern (<1», 9=0 0
f=1800 MHz, R22
f=600 MHz, TEM
,j
'/
',1,'11
-r
_.
10
05
-G 5>
-1.0
-'-t--,----..---r---.----r--...----r,---,.--,----....--..,.,M N M M M B イ M セ
- 50
- c,
-50
C'
RollI·1
Certificate No: Z16-97054
Page 8 of II
50
100
150
.o wi
e a
Add: NO.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattJ.com
Http://www.chinanl.cn
Dynamic Range f(SAR head }
(TEM cell, f = 900 MHz)
-..
___ . _ .I
L. __ -I
L. _ - ' . - ' _ " -1.1_,_,
-- ••• ,- •• ,. • ., • .,- .. .,., •••,-.-- •• ,.--,
••••• , - -., -,.,- r ,-,-.-.-.- - -., - -, •• r
- - - - -, - - -, -,-,- r ,-.-.-.- - - - - -, - - -,- - r
- - • - - , - - -, - ,. ,- r ,-.-,-,- • - - - -(' - - , - - r
. __
.,_ ....._...
' "
'"
• • .1 __ . . . __, _ " _ , , .'.L.L.L. _ . _
.1 ..
, ,.,,.--- •• ,- ••
- r •• - r,., T - - - • • , - - .
- r ••- r T' T - • • • - , . - ..
- r -1- r T , T • - - - • , - - -
___ • ..t
r--'·.,-T-'-,.,.,.-·----.- .. ,.-T
r - -,.,-,. - , - i i i - . - - - -,- - T -,.
r· -.-,- T - . - " , - . - - - r -T· T
r - -.- ,- T . , . , rr - • - •• r - - -,- • ,. - ,.
--, .... -.- ......... _.
... .. _.
... .... ......+---- -..- -- .. -- ....
- . ]- - -:- .: - +-:-:- :-:- - - - - - ]- - - -;- -+-+-
--_.- . -.- ... - ... - ... -.... -.-.-,------ ... -- ... - - -
-----セ ---:. --:. -: -r-: .:-:-:- -.---:- ---: --r-r.:- r f セ
-J-.
_.,_
セ
.L __ •__
I_.I_'_ -..
--T--,--.-'-,- ....
--T--,--,-'-,-rr
. . ::: セZ =:=::= ]Zセ
セ
- - - - - セN - -:-. -:- -:. i- -:-:.:-:-. -. - -:. - - -:. - i- - i- -:- i-+ セ i· - -. - セM -. i- - -:- -:- t -:-:-:-:- -. - --i- -- -:-. +- t ..
• • • • 11
•
I""
'11"
- - - - Mセ - - セM - セ - セ .:- セ セ セ f - - - - - セM -. セM -:- Mセ f MZセ
- •• - - セ •• -:- - J._
- - -. - セ - - Mセ - セM セM
セ セMZ
•
10'
___ . _ ..,
•
I ""
'"
,.,
•
IL. _ "I . - ,1_ "
I .." I ,
_1_,_,
'_1_1
___ . _ .. _ . _ ... _ ....... _
" , . ' . , ,.
" "
1'11'
I _ .
I .."
•L. __ ..I __ ..
,_ ' "
• __ .. __
. " ,
"1'
'"
III'
, "
..I __ • "I __ " "
.L_I_L.LL.
_.
1_"_
__ .. _ .. · , ·
• • .. __ • .. __,_ .. _._,_ ......... _ .
•
, _
..
..
- .... __
T -r T " , · T - - - - - , - - . r - - •• ,- T -,-r("r -. - -- -- - - - - - - , • • - , - , . "'-1"
,-,-,- - - - - -r - -1"- r •• -1"'"
-- -. -,-. -r -,. '-r,-,-,-,- -- ---r --,. - "-r -1-'" T, T- - - . - , - -·r --1- "'\- T -I-rrr -. - r· - - T -T·(' T " , - - -,- - ._
- - - r - r -,- r T,,. - - - - - , - - - r - -,- -,- T ·,-("("r - T - T -r T ' " - •- -.
__ ••
.. - -r -_ •- _- r ",\-,-,-,_1_'_'_·-. - - - j __
__ .. _.. _1_
• __ •• ..
.. --1- .. -.-1-.....
.. 1__
-. - - - セ - - -:- --:. -:- i- -:.:-:-:- - - - •• :. - ••:. - i-. i- .:- i- +セ +---.. セM -. r- -:- .:- +-:-:-'
- - •• -1- - -:- - -:. -:-:- -:.:-:-:- •. - - -:. - - -:- - i- - r-:-]- +セ 7- - - - -1- -.]- - -:- -:- t
-: -
-: -
IL. _
""
-;- - ; - : -;-;-:-;- -
,_ ,
-; -
""
III
-;. - : - : - : - : : : : -
" "
IL. _
I_
.""
"_
'"
• _ .I. .
I'"
- - ---.,---r- -., . .,-- ..r ",\.,-,-,.,-1·'-'- -- ...
- - -- -r - ..... - rr-- r .,-- rr,.,
T.,,,T -- -- --.. -.,
• __
_,_,
- r ,-,-,-,_ •. - - -r - -,- - r - r -,- r
- r ,.,-,-,-. - - - -r - -,. - r - r .,- r
- - -. - .. - _- -
_1_._1
T, T - . -
T' T - -..
I· -
-: -
-'
: : : -- -
11'
r - -.- ... - T -,-r("r
- -- r· -,- "'\- T -,-r("r
-. -- - r· - -,-. T - T -('
-. - - - r - - .,- - T - T -r
--
セM
'"
"."
-;- - : - : - : : : : : - - - - - -;-- -
,"
'"
I _.I.
'"
..
, __ ..
_L.
- --
rr
._.,__._ .. _1_ r ..r
. - r·- -:-- +. t -:. +セMゥ -- - -- -:- - -7 --;- -:- MhZセ
r---;- -7- t -:- +111- - - -. -:- - - t --:- -;. セ -:- ri-
I"
"I
' " L.
.L_._L.
-j --.,- -
- - - - -, -. -r - - -. -, - - -r - -. - -,. - -r -,
-:- --: -
·,-r r
- - - , - - - T - -,•••- ,
- - . . . . . . - T - -,- . , - , -,- - - "'\- - - T - -,- - . - , -,-
II'
III
,.
:--:--:-; -:-::
,"
__ .. .1., .
1_.1" "
._1__ .1_ ..
__ 1_"_
.,-""r- -. - - - .. - - -,- -,. - T-,..,..,.,., - - - - -.,-- -_.,.
- -,-"-,,
- -,- -.-., -,- ..
-,- "'\- T -,-rr(" - - - - - ... - -,- - T - T -r T'" - - - - - T - -,- -,-, -,- r r
-,- -,-, -,- rr
T'" - - - - -- -- -- TT -- -,--,.,
-,- r r
T", - - - - -
- -- -- .. _.. _1_.....
--- .. - - - .. - -1-"'-' -1-. - - - - -I. _. _- -- - - _. - -,- .1- .. -1_ ..
-----セ ---:- --:- -:-]- -;-:-:-:- -----:. ---:- -r-]- -:- i- + - - -1- -.]- - -;.•;- +.:-:-;-:- - - - - - i-. - -:- - t - f -:- 7111- - - -. -:- - - 7- -:- -:-1-:- rr
-----1---:·--:·-:-]--:·;-:-:-·----:·---:-·;.-]--: ,1f-----,---]---:--:-t-:-:-:-:--·---i----;-·t-f-;-t-i-H----··;---t--:--;--i-;-rr
••
L._
I'
I _L.
- - -. - セ - - Mセ
___ . _ ..I
MセN
,I.,
セM
---.- .. -.- -
セ セNZM[
- - - - Mセ
""
- セMN
,.,1
',_,_,
" ••
1-'-'.. _. __ ·
- - - - -, - - -, -,-,- r ,-,-,-,- -. -
-. - - -,- - -r -,.,. r'-'-I-I-·· -, -__- -r·,·
,-r ",\-,-,-,.
--- .-_-.
._
,_._
- - - - -1- - -:- - -: - -; - i- -: -:.1
- - - - -1- - -:- - -:- -:-r
III
, ..;- セ
1'"
セ セ セ
'"
_ I
- -,-. r - r ",. r
T'
•
_.. _,_
- - •• - セM - - セ - -:- Mセ
""
1.".1
I I
,_
•
1,1"
",
セ セ MZ
, "'1
I __ '_
I ..I _.L_r
..
..
T- - -. -,- - ..
•
• __'_ .. _._1_
1"- -,- "'\- T
- ... -,- r
T' T - - - . - , - -.1" - -,- "'\- T
.. __
' " L.
•
"I
{' セ
Nセ
- - - - セM
II"
"""
.. _ ."
_ I __ .L_.L_
__1__ ._._
__ 1
- - f --;- -:- セ -:- セ セ
I .
•
"'"
---_
-.-rr(" - - -- - r - - -,- wT - T -r T " , · - -,·r("r -. - - - r·-__-,- T - T -r T " , · - 1__ . _ . _
_ ••'
- セ - セMZ
f セ {'- - - - - セM
セ
'I
- - セ - -;- Mセ
'"
""
•
- - - - Mセ
セ セ NZM
- - -:- - セ - セ
""
""
{' セ
Mセ
Nセ
","
..I
I.
II
I ••, _ .." _,_ " ..
..I __ 1_
• __1__
_1_ .
- - - T --,- - . - , -,-
rr
- - , - - . T --,- . , . , -,-
r ..r
- -
•
__ , __ ._ .. _,_
- - f --:- -:- セ -:- セ セ
- - -. セM
II"
""
, . "
, . .1." _, .......
' " L. _ . . . __ ' "
""
.1' ".. __ 1_ . .
__ , __ ... _ ..
_ .....
.."
セBNiN
- --. -, -. - .,-"'\- .. ,,-,-,-,-_. -- - - - ,.- .. - r -•• rT., T-- - --,---r--,-.,-,. -,-""" ---- -
-""t.,-
---:-. ]- -セ .:- i- +1T- - - - - 1- - - ]- - -:- .:- f -:- ;-;-:- - - - - - r---;- - T- +-;. f -i -i -i • - - - - -; - - - 7- -:- -:- -i -:- r セ
---:-, -l-I -l-, -:-ii 1t - - - -. -i - - -l- - -:- .:- +-:-:-:-;- -. -. -l-." -;- - T- +-;. i 11 -i - - - - --:- - - T--:- -;. 1-;- rr
"'"
'"
, , ""
" , '1""
'.,. " "
'."
' " J,
__ .., _ . . ,. _ .
. 1_ .......
-,-,- r ,-,-,-,- - - - - r ,.,-,-,. - - - - -,.,- r ,.,-,-,- - - - .. -
- - -. - セ •• -:- - f - f Mセ
... - r-.- r T'T - -. - .,. -·r--,-,- T-,-rr,-· ---r---,- - T- T-(' T", -- - - --.- - - T--,- .,., -,- rr
MNセ
- -,- - r
- - .. - _ .. _ .. _1_
- - セM
- - - - - J - - _ ... -
""
... __ I, __ ._
セ
I _,_
I ..
" L
- -,-- T-,. -,.. T.,." -- -- -.,- - -,. --,- "1-' -,- ....
- -,. -I" - r .,. r T, T- - - - - 1 - - - r - -,-"'\- T -,-rrr - - -··r·· -,- - T - -, •• r - r .,- r T' T - . - - . , . - - r - -,- "'\- T -,-rr, - - - - - r· - -,- - T -
-r T' l '
-r T'"
- - - - -,- - - - - - -,- - -
T --,- -,-, -,. r r
T --,- -,-, -,- rr
r-,- r T, T - - - - -, - -- r - -,- "'\- T -,-r("r -. - - - r - - -,- - T - T -r T'" - - - - - ... - - - T --,- -,-, .,- rr
_ -- --,- -- ..r -- ...,....... - - - - .. - - - .. - -,- ... -.
_. - - - .. _ - -1- _. -. - .........
.... -_.+ --'__ 1_ .. _'_ ....
--; •.:-i--:.:-:-:------ - - -:- NセM l' -;- セ f -i T- - - - - -]- - f -:-:-:-:- - - -. -1' - - -:- - f -f -:. Tセ セMゥN
- -. - -;- - -t --:- -:- セ -:-:- i- -;- -:- i- -:.;-:-:- •• - -- ---:- -r- 1'-;- r f セ f - - - - - -i - _. l' - -;- -;- f -;-:-:-:- _. -- - 1- - --:- -f - +-:- H セ セNM ----:- -- t --:- -:-1-:- l' セ
_.. • ... • .... _1_'_'__ •
- セM セM
セ
""
• I""
セMZ
セ セ セ
MャセB G G
r- -;- -:-
セ
• 'I"
'"
"'l"
'"
I'"
•
I1II
- -- -- - - セM - -
セ セNZM
セM
f -----
"I"
'"
セN
セ
- - - -:- Mセ f MZセ
SAR[mW/cm
not compensated
"t:'"
セ
...,.
--
.-
."
- -:-.; - ヲᄋセ
• • , '0'
セ セ
I.
. , Bセi
•
I'
'"
• I o'
- - - - - セM - - f - -:- -:- セ -:- セ セ
III
IIII
It
II
I"
,.
- . . . compensated
............--t-..::-.,..
co
"0
- _. - MセN
I ••
セ
-1
f·
r"
""
セ
•
10'
SAR mIN/em
. not compensated
.'
;:--
10'
•
Uncertainty of Linearity Assessment: to.9% (k=2)
Certificate No: Z16-97054
Page 9 of 11
10'
In Co leooratio
-TTL L-P
'Ii
s__
CAUBRAllON LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Hltp:llwww.chinatll.cn
Conversion Factor Assessment
f=900 MHz, WGLS R9(H_convF)
セ
4.00
s.[..{l
f=1750 MHz, WGLS R22(H_convF)
MMセ
-----
---.+----!---I-----'---
:', QO MLセN
•
セ •. (OD ,---:.----1------:-,...l:
セ ᆳM i ⦅ L セZ
セ
ヲZHャョMセi
2511
;;>3(10
•
i'€
1 - ' 1 - - - - \ - - - -..-+
ifJ l S·U
---
!(J.iJO
ᆳMB[MセZM Mi
-----7"lt:------i------+---
セNvo
(,SO セN
--------"W------!---
.. Coil w セ セ G M セ ⦅ セ
2lJ
sa
li(\
8l'r
,]
lOti
セサj
Nlセ N N ャセ ⦅ ]セ ⦅セ Nj
MュB。[オイセ、
10
::r;
10
4('
l\
z[mn'l
Ill)
anal lie
Deviation from Isotropy in Liquid
·1 :}
--,
08
0.6
D4
02
U1
セN
0.0
-02
-0 "
-06
-0.0
350
o J\1
(I
(I 2(1
IJ I
Uncertainty of Spherical Isotropy Assessment: ±2,8% (K=2)
Certificate No: Z16-97054
Page 10 of II
ゥH セ
oセ
n-
in eonaoor!it"')
_TTL L..P e a 9_ _
--
CAUBRATION LABORATORY
Add: No.51 Xueyuan Road, Haidian District, Beijing, 100191, China
Tel: +86-10-62304633-2218
Fax: +86-10-62304633-2209
E-mail: cttl@chinattl.com
Http://www.chinattl.cn
DASY/EASY - Parameters of Probe: EX3DV4 - SN: 3578
Other Probe Parameters
Sensor Arrangement
Triangular
Connector Angle (0)
165.9
Mechanical Surface Detection Mode
enabled
Optical Surface Detection Mode
disable
Probe Overall Length
337mm
Probe Body Diameter
10mm
Tip Length
9mm
Tip Diameter
2.5mm
Probe Tip to Sensor X Calibration Point
1mm
Probe Tip to Sensor Y Calibration Point
1mm
Probe Tip to Sensor Z Calibration Point
1mm
Recommended Measurement Distance from Surface
Certificate No: Z16-97054
Page 11 of 11
1.4mm
Download: AP6234E WLAN module RF Exposure Info RF Exp Appendix C Getac Technology Corporation
Mirror Download [FCC.gov]AP6234E WLAN module RF Exposure Info RF Exp Appendix C Getac Technology Corporation
Document ID3388731
Application ID/+5G16pBnDClbfdeSzXJ7Q==
Document DescriptionRF Exp Appendix C
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeRF Exposure Info
Display FormatAdobe Acrobat PDF - pdf
Filesize254.51kB (3181368 bits)
Date Submitted2017-05-12 00:00:00
Date Available2017-05-15 00:00:00
Creation Date2017-10-25 00:22:24
Producing SoftwareGPL Ghostscript 9.18
Document Lastmod2017-10-25 00:22:24
Document TitleRF Exp Appendix C

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:291d97d3-9b7b-11f2-0000-02c7314339d4
Producer                        : GPL Ghostscript 9.18
Modify Date                     : 2017:07:07 21:52:46Z
Create Date                     : 2017:07:07 21:52:46Z
Creator Tool                    : UnknownApplication
Document ID                     : uuid:291d97d3-9b7b-11f2-0000-02c7314339d4
Format                          : application/pdf
Title                           : Untitled
EXIF Metadata provided by EXIF.tools

Facebook Twitter Google+ RSS © FCCID.io 2018