FCC ID QYLEM9190V

C2PC for adding Getac Notebook model V110, V110G7, and V110Y. The highest reported SAR value for body-worn, and simultaneously transmission exposure condition is 0.36W/kg and 1.18 W/kg respectively. FR1 n7, n12, n25, n41 bands are disabled and LTE B30is RX only. Power out is conducted at the antenna terminal. Single Modular Approval. This device is certified for mobile and fixed applications. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in2.1091.Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. C2PC filing for enabling 5GNR n48 Band through software and the device keeps electrically identical. This device has 5 MHz, 10 MHz, 15MHz and 20MHz bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band. This device also contains LTE Bands2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bandsn2/n5/n7/n12/n25/n41/n66/n71/77.

C2PC for adding Getac Notebook model V110, V110G7, and V110Y. The highest reported SAR value for body-worn, and simultaneously transmission exposure condition is 0.36W/kg and 1.18 W/kg respectively. FR1 n7, n12, n25, n41 bands are disabled and LTE B30is RX only. Power out is conducted at the antenna terminal. Single Modular Approval. This device is certified for mobile and fixed applications. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in2.1091.Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. C2PC filing for enabling 5GNR n48 Band through software and the device keeps electrically identical. This device has 5 MHz, 10 MHz, 15MHz and 20MHz bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band. This device also contains LTE Bands2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bandsn2/n5/n7/n12/n25/n41/n66/n71/77.

Power out is conducted at the antenna terminal. Single Modular Approval. This device is certified for mobile and fixed applications. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091.Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. C2PC filing for enabling 5GNR n48 Band through software and the device keeps electrically identical. This device has 5 MHz, 10 MHz, 15 MHz and 20MHz bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band. This device also contains LTE Bands2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bandsn2/n5/n7/n12/n25/n41/n66/n71/77.

Power out is conducted at the antenna terminal. Single Modular Approval. This device is certified for mobile and fixed applications. Co-location of this module with other transmitters would require the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091.Under no conditions may an antenna gain be used that would exceed the EIRP power limit as specified in Part 96. The Grantee is responsible for providing the documentation required for modular use. C2PC filing for enabling 5GNR n48 Band through software and the device keeps electrically identical. This device has 5 MHz, 10 MHz, 15 MHz and 20MHz bandwidth modes (LTE B48); and has 10MHz, 20 MHz and 40 MHz bandwidth modes (uplink) for 5GNR n48 band. This device also contains LTE Bands2/4/5/7/12/13/14/17/25/26/30/38/41/42/66/71; and 5G NR (FR1, sub-5GHz) Bandsn2/n5/n7/n12/n25/n41/n66/n71/77.

Power out is conducted at the antenna terminal. Single Modular Approval. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. Class II Permissive Change Application to enable some more LTE and 5GNR Bands via software, as documented in this filing; and the hardware keeps electrically identical. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands13/14/17/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands7/38/41/42/71. This device also supports CA UL on the LTE Bands 7/38/41/42/66. This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10 MHz and 15 MHz bandwidth modes for NR band n12;5MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5/n7/n25/n71;5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66;20 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR bands n41/n77 (n77 is only applicable in the ranges of 3450-3550MHz and 3700-3980 MHz). This device also contains LTE Band 48 (CBRS) transmitter.

Power out is conducted at the antenna terminal. Single Modular Approval. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits - this filing complies with KDB447498 and is approved for mobile/fixed operation. Installers and end-users must be provided with transmitter installation and operation conditions for satisfying RF exposure compliance. The antenna used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures as documented in this filing. For mobile operating configurations the antenna gain, including cable loss, must not exceed the gains documented in this filing for satisfying RF exposure compliance, as defined in 2.1091. Under no conditions may an antenna gain be used that would exceed the ERP and/or EIRP power limits as specified in Parts22/24/27/90. The Grantee is responsible for providing the documentation required for modular use. Class II Permissive Change Application to enable some more LTE and 5GNR Bands via software, as documented in this filing; and the hardware keeps electrically identical. This device has 1.4 MHz, 3 MHz, 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands 2/4/25/66; 1.4 MHz, 3 MHz, 5 MHz and 10 MHz bandwidth modes for LTE Bands 5/12; 1.4 MHz, 3 MHz, 5 MHz, 10 MHz and 15 MHz bandwidth modes for LTE Band 26; 5 MHz and 10 MHz bandwidth modes for LTE Bands13/14/17/30; 5 MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for LTE Bands7/38/41/42/71. This device also supports CA UL on the LTE Bands 7/38/41/42/66. This device supports 5G NR (FR1, sub-6GHz) SA and NSA (EN-DC) modes, as documented in this filing; and it has 5MHz, 10 MHz and 15 MHz bandwidth modes for NR band n12;5MHz, 10 MHz, 15 MHz and 20 MHz bandwidth modes for NR bands n2/n5/n7/n25/n71;5MHz, 10 MHz, 15 MHz, 20 MHz, 30 MHz and 40 MHz bandwidth modes for NR band n66;20 MHz, 30 MHz, 40 MHz, 50 MHz, 60 MHz, 70 MHz, 80 MHz, 90 MHz and 100 MHz bandwidth modes for NR bands n41/n77 (n77 is only applicable in the ranges of 3450-3550MHz and 3700-3980 MHz). This device also contains LTE Band 48 (CBRS) transmitter.