FCC ID R9C-OP25249
Mobile Phone
by Guangdong OPPO Mobile Telecommunications Corp., Ltd.
Grantee Code: R9C Product Code: OP25249
Latest application date: 2026-02-03
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-03 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-03 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-03 |
| 2572.5-2617.5 MHz | Class II permissive change or modification of presently authorized equipment | 2026-02-03 |
| 2402-2480 MHz | Original Equipment | 2025-11-24 |
| 5745-5825 MHz | Original Equipment | 2025-11-24 |
| 2412-2462 MHz | Original Equipment | 2025-11-24 |
| 2572.5-2617.5 MHz | Original Equipment | 2025-11-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2026-08-02 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2026-08-02 | PDF 316.7 KB |
| Internal photos | Internal Photos | 2026-05-17 | PDF 1.4 MB |
| External Photos | External Photos | 2026-08-02 | PDF 1.1 MB |
| External Photos | External Photos | 2026-05-17 | PDF 1.1 MB |
| ID Label/Location Info | ID Label/Location Info | 2026-02-03 | PDF 215 KB |
| ID Label/Location Info | ID Label/Location Info | 2025-11-24 | PDF 210.6 KB |
| Test Setup Photos_RF | Test Setup Photos | 2026-08-02 | PDF 645.1 KB |
| Test Setup Photos_RF | Test Setup Photos | 2026-08-02 | PDF 681 KB |
| Test Setup Photos_RF | Test Setup Photos | 2026-08-02 | PDF 2.2 MB |
| Test Setup Photos_SAR | Test Setup Photos | 2026-08-02 | PDF 1.3 MB |
| RF test setup photo | Test Setup Photos | 2026-05-17 | PDF 166.2 KB |
| RF test setup photo | Test Setup Photos | 2026-05-17 | PDF 799.8 KB |
| SAR test setup photo | Test Setup Photos | 2026-05-17 | PDF 999.3 KB |
| Test Setup Photos_JBP | Test Setup Photos | 2026-05-17 | PDF 268.4 KB |
| Test Report_DFS | Test Report | 2026-02-03 | PDF 1.3 MB |
| Test Report_DSS_Part 1 | Test Report | 2026-02-03 | PDF 5.1 MB |
| Test Report_DSS_Part 2 | Test Report | 2026-02-03 | PDF 4.1 MB |
| Test Report_JBP | Test Report | 2026-02-03 | PDF 1.2 MB |
| Test Report_NII | Test Report | 2026-02-03 | PDF 5 MB |
| Test Report_NII_Data Part 1 | Test Report | 2026-02-03 | PDF 5.9 MB |
| Test Report_NII_Data Part 2 | Test Report | 2026-02-03 | PDF 975.3 KB |
| Test Report_NII_Data Part 3 | Test Report | 2026-02-03 | PDF 2.7 MB |
| Test Report_PCE | Test Report | 2026-02-03 | PDF 2.4 MB |
| Test Report_PCE_Data Part 1 | Test Report | 2026-02-03 | PDF 4.2 MB |
| Test Report_PCE_Data Part 2_1 | Test Report | 2026-02-03 | PDF 3.3 MB |
| Test Report_PCE_Data Part 2_2 | Test Report | 2026-02-03 | PDF 3.3 MB |
| Test Report_PCE_Data Part 3_1 | Test Report | 2026-02-03 | PDF 3.6 MB |
| Test Report_PCE_Data Part 3_2 | Test Report | 2026-02-03 | PDF 3.9 MB |
| Test Report_PCE_Data Part 4_1 | Test Report | 2026-02-03 | PDF 4.1 MB |
| Test Report_PCE_Data Part 4_2 | Test Report | 2026-02-03 | PDF 4.2 MB |
| Test Report_PCE_Data Part 5 | Test Report | 2026-02-03 | PDF 3.3 MB |
| Test Report_SAR_Part 1 | RF Exposure Info | 2026-02-03 | PDF 4.9 MB |
| Test Report_SAR_Part 2 | RF Exposure Info | 2026-02-03 | PDF 5 MB |
| Test Report_SAR_Part 3 | RF Exposure Info | 2026-02-03 | PDF 4.1 MB |
| Test Report_WLAN_Part 1 | Test Report | 2026-02-03 | PDF 5.3 MB |
| Test Report_WLAN_Part 2 | Test Report | 2026-02-03 | PDF 5.1 MB |
| Test Report_WLAN_Part 3 | Test Report | 2026-02-03 | PDF 5 MB |
| Test Report_WLAN_Part 4 | Test Report | 2026-02-03 | PDF 5.2 MB |
| Test Report_WLAN_Part 5 | Test Report | 2026-02-03 | PDF 5.5 MB |
| Test Report_WLAN_Part 6 | Test Report | 2026-02-03 | PDF 5.5 MB |
| Test Report_WLAN_Part 7 | Test Report | 2026-02-03 | PDF 4.6 MB |
| Antenna Gain test report | Test Report | 2025-11-24 | PDF 675 KB |
| DFS test report | Test Report | 2025-11-24 | PDF 1.1 MB |
| DTS test report_BLE | Test Report | 2025-11-24 | PDF 3.1 MB |
| DTS test report_WLAN-1 | Test Report | 2025-11-24 | PDF 5 MB |
| DTS test report_WLAN-2 | Test Report | 2025-11-24 | PDF 4.2 MB |
| Data Part 1 | Test Report | 2025-11-24 | PDF 5.6 MB |
| Data Part 1 | Test Report | 2025-11-24 | PDF 4 MB |
| Data Part 2 | Test Report | 2025-11-24 | PDF 829.4 KB |
| Data Part 2 | Test Report | 2025-11-24 | PDF 5.5 MB |
| Data Part 3 | Test Report | 2025-11-24 | PDF 2.5 MB |
| Data Part 3 | Test Report | 2025-11-24 | PDF 5.1 MB |
| Data Part 4-1 | Test Report | 2025-11-24 | PDF 5 MB |
| Data Part 4-2 | Test Report | 2025-11-24 | PDF 1.5 MB |
| Data Part 5 | Test Report | 2025-11-24 | PDF 2.6 MB |
| NII test report | Test Report | 2025-11-24 | PDF 4.9 MB |
| PCE test report | Test Report | 2025-11-24 | PDF 5.1 MB |
| SAR test report | RF Exposure Info | 2025-11-24 | PDF 4.2 MB |
| SAR test report | Test Report | 2025-11-24 | PDF 4.2 MB |
| Test Report_DSS | Test Report | 2025-11-24 | PDF 3.9 MB |
| Test Report_JBP | Test Report | 2025-11-24 | PDF 1.1 MB |
| Test Report_SAR | RF Exposure Info | 2025-11-24 | PDF 4.2 MB |
| Attestation Statements | Attestation Statements | 2026-02-03 | PDF 113.8 KB |
| Product Equality Declaration | Attestation Statements | 2026-02-03 | PDF 71.5 KB |
| US Agent Letter | Attestation Statements | 2026-02-03 | PDF 127.1 KB |
| US Agent | Attestation Statements | 2025-11-24 | PDF 127.1 KB |
| Authorization letter | Cover Letter(s) | 2026-02-03 | PDF 117.2 KB |
| Confidentiality | Cover Letter(s) | 2026-02-03 | PDF 118.9 KB |
| FCC Class II permissive change letter | Cover Letter(s) | 2026-02-03 | PDF 125.9 KB |
| FCC DTS UNII Declaration | Cover Letter(s) | 2026-02-03 | PDF 115.9 KB |
| Product Equality Declaration | Cover Letter(s) | 2026-02-03 | PDF 71.5 KB |
| US Agent Letter | Cover Letter(s) | 2026-02-03 | PDF 127.1 KB |
| Authorization Letter | Cover Letter(s) | 2025-11-24 | PDF 117.2 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2025-11-24 | PDF 118.9 KB |
| Calibration report_Part 1 | RF Exposure Info | 2026-02-03 | PDF 4.7 MB |
| Calibration report_Part 2 | RF Exposure Info | 2026-02-03 | PDF 4.8 MB |
| Calibration report_Part 3 | RF Exposure Info | 2026-02-03 | PDF 4.9 MB |
| Calibration report_Part 4 | RF Exposure Info | 2026-02-03 | PDF 4.2 MB |
| Ti-CC26010219-AP | RF Exposure Info | 2026-02-03 | PDF 5.6 MB |
| Ti-CC26010219-ASC | RF Exposure Info | 2026-02-03 | PDF 1.6 MB |
| Ti-CC26010219-AST | RF Exposure Info | 2026-02-03 | PDF 774.6 KB |
| Ti-CC26010219-ATD_Part 1 | RF Exposure Info | 2026-02-03 | PDF 5 MB |
| Ti-CC26010219-ATD_Part 2 | RF Exposure Info | 2026-02-03 | PDF 5 MB |
| Ti-CC26010219-ATD_Part 3 | RF Exposure Info | 2026-02-03 | PDF 577.5 KB |
| BL-SZ2580860-ASC | RF Exposure Info | 2025-11-24 | PDF 763.1 KB |
| BL-SZ2580860-AST | RF Exposure Info | 2025-11-24 | PDF 212.4 KB |
| BL-SZ2580860-ATD | RF Exposure Info | 2025-11-24 | PDF 3.4 MB |
| Calibration report-1 | RF Exposure Info | 2025-11-24 | PDF 4.9 MB |
| Calibration report-2 | RF Exposure Info | 2025-11-24 | PDF 3.6 MB |
| Block Diagram Metadata only | Block Diagram | PDF 560.8 KB | |
| Schematics Metadata only | Schematics | PDF 2.5 MB | |
| Schematics Metadata only | Schematics | PDF 3 MB | |
| NII Software Security Info Metadata only | Operational Description | PDF 200.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 1.3 MB | |
| Software Security Requirement Description for UNII Metadata only | Operational Description | PDF 200.6 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 225 KB | |
| Part list (BOM) Metadata only | Parts List/Tune Up Info | PDF 273.1 KB | |
| Tune up procedure Metadata only | Parts List/Tune Up Info | PDF 5.6 MB | |
| Tune-up Procedure Metadata only | Parts List/Tune Up Info | PDF 2.4 MB |
Application Information
| Application ID | vFy8r5ypX1M5TUj+1yvGdQ== |
|---|---|
| Final Action Date | 2026-02-03 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022216790 |
| Model | OP25249 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Mobile Phone |
| Responsible Party | Xiong Bo, xiongbo@oppo.com |
| Technical Contact | Xuewen Wu, Shenzhen BALUN Technology Co., Ltd, cbproject@baluntek.com |
| Non-Technical Contact | Richard Wahng, Innopeak Technology, Inc., richard.wahng@oppo.com |
| Test Firm | Hanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com |
| TCB Email | dl_radio-certification@kiwa.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| vFy8r5ypX1M5TUj+1yvGdQ== | 2026-02-03 | Class II permissive change or modification of presently authorized equipment |
| BaF7QC6yfJu2/ExHy1cDcQ== | 2026-02-03 | Class II permissive change or modification of presently authorized equipment |
| 4n4ZrK0UnL5ep4skYzaiPQ== | 2026-02-03 | Class II permissive change or modification of presently authorized equipment |
| 3tTcotHhEyy+xY5WI7enjw== | 2026-02-03 | Class II permissive change or modification of presently authorized equipment |
| +UJyjdchf3CHzZikvpjSfA== | 2026-02-03 | Class II permissive change or modification of presently authorized equipment |
| p3ATEA3cA2an+uwaKYziZw== | 2025-11-24 | Original Equipment |
| olgelAq3VyU+Iipxeby8IQ== | 2025-11-24 | Original Equipment |
| UbY1BlZ9PaAbbINqMC2+KA== | 2025-11-24 | Original Equipment |
| IYS/Zmq3tUh4gA4cdSHBSw== | 2025-11-24 | Original Equipment |
| +95XCXKDoa7YyQf5oax1aA== | 2025-11-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 2402-2480 MHz | 0.019 | 15C | CC | ||
| 15B | CC | ||||
| 5180-5240 MHz | 0.061 | 15E | CC | ||
| 5260-5320 MHz | 0.063 | 15E | CC ND | ||
| 5500-5700 MHz | 0.049 | 15E | CC ND | ||
| 5745-5825 MHz | 0.06 | 15E | CC | ||
| 2402-2480 MHz | 0.0053 | 15C | CC | ||
| 2412-2462 MHz | 0.22 | 15C | CC | ||
| 824.2-848.8 MHz | 0.409 | 2.5 PM | 245KGXW | 22H | |
| 824.2-848.8 MHz | 0.169 | 2.5 PM | 247KG7W | 22H | |
| 1850.2-1909.8 MHz | 0.593 | 2.5 PM | 246KGXW | 24E | |
| 1850.2-1909.8 MHz | 0.415 | 2.5 PM | 247KG7W | 24E | |
| 1852.4-1907.6 MHz | 0.138 | 2.5 PM | 4M11F9W | 24E | |
| 1712.4-1752.6 MHz | 0.123 | 2.5 PM | 4M11F9W | 27 | |
| 826.4-846.6 MHz | 0.048 | 2.5 PM | 4M11F9W | 22H | |
| 1850.7-1909.3 MHz | 0.164 | 2.5 PM | 17M9G7D | 24E | |
| 1850.7-1909.3 MHz | 0.116 | 2.5 PM | 18M0W7D | 24E | |
| 1850.7-1909.3 MHz | 0.173 | 2.5 PM | 13M4G7D | 24E | |
| 1850.7-1909.3 MHz | 0.123 | 2.5 PM | 13M4W7D | 24E | |
| 1710.7-1754.3 MHz | 0.142 | 2.5 PM | 17M9G7D | 27 | |
| 1710.7-1754.3 MHz | 0.1 | 2.5 PM | 17M9W7D | 27 | |
| 1710.7-1754.3 MHz | 0.156 | 2.5 PM | 13M4G7D | 27 | |
| 1710.7-1754.3 MHz | 0.109 | 2.5 PM | 13M4W7D | 27 | |
| 824.7-848.3 MHz | 0.053 | 2.5 PM | 8M97G7D | 22H | |
| 824.7-848.3 MHz | 0.051 | 2.5 PM | 8M97W7D | 22H | |
| 824.7-848.3 MHz | 0.059 | 2.5 PM | 4M48G7D | 22H | |
| 2502.5-2567.5 MHz | 0.308 | 2.5 PM | 17M9G7D | 27 | |
| 2502.5-2567.5 MHz | 0.222 | 2.5 PM | 17M9W7D | 27 | |
| 2502.5-2567.5 MHz | 0.321 | 2.5 PM | 13M4G7D | 27 | |
| 2502.5-2567.5 MHz | 0.245 | 2.5 PM | 13M4W7D | 27 | |
| 779.5-784.5 MHz | 0.053 | 2.5 PM | 8M97G7D | 27 | |
| 779.5-784.5 MHz | 0.038 | 2.5 PM | 8M96W7D | 27 | |
| 779.5-784.5 MHz | 0.055 | 2.5 PM | 4M48G7D | 27 | |
| 779.5-784.5 MHz | 0.042 | 2.5 PM | 4M49W7D | 27 | |
| 826.5-827.5 MHz | 0.054 | 2.5 PM | 4M48G7D | 22H | |
| 826.5-827.5 MHz | 0.04 | 2.5 PM | 4M49W7D | 22H | |
| 817.5-821.5 MHz | 0.055 | 2.5 PM | 4M48G7D | 90 | |
| 817.5-821.5 MHz | 0.04 | 2.5 PM | 4M48W7D | 90 | |
| 832.5-837.5 MHz | 0.059 | 2.5 PM | 13M4G7D | 22H | |
| 832.5-837.5 MHz | 0.04 | 2.5 PM | 13M4W7D | 22H | |
| 832.5-837.5 MHz | 0.065 | 2.5 PM | 4M49G7D | 22H | |
| 832.5-837.5 MHz | 0.041 | 2.5 PM | 8M96W7D | 22H | |
| 824.7-848.3 MHz | 0.058 | 2.5 PM | 13M4G7D | 22H | |
| 824.7-848.3 MHz | 0.043 | 2.5 PM | 13M4W7D | 22H | |
| 814.7-823.3 MHz | 0.053 | 2.5 PM | 8M96G7D | 90 | |
| 814.7-823.3 MHz | 0.038 | 2.5 PM | 8M96W7D | 90 | |
| 814.7-823.3 MHz | 0.054 | 2.5 PM | 2M69G7D | 90 | |
| 814.7-823.3 MHz | 0.043 | 2.5 PM | 2M69W7D | 90 | |
| 2572.5-2617.5 MHz | 0.311 | 2.5 PM | 17M9G7D | 27 | |
| 2572.5-2617.5 MHz | 0.2 | 2.5 PM | 17M9W7D | 27 | |
| 2572.5-2617.5 MHz | 0.32 | 2.5 PM | 8M97G7D | 27 | |
| 2572.5-2617.5 MHz | 0.206 | 2.5 PM | 13M4W7D | 27 | |
| 2532.5-2652.5 MHz | 0.271 | 2.5 PM | 17M9G7D | 27 | |
| 2532.5-2652.5 MHz | 0.236 | 2.5 PM | 17M9W7D | 27 | |
| 2532.5-2652.5 MHz | 0.276 | 2.5 PM | 13M5G7D | 27 | |
| 2532.5-2652.5 MHz | 0.251 | 2.5 PM | 4M50W7D | 27 | |
| 1710.7-1779.3 MHz | 0.157 | 2.5 PM | 17M9G7D | 27 | |
| 1710.7-1779.3 MHz | 0.109 | 2.5 PM | 17M9W7D | 27 | |
| 1710.7-1779.3 MHz | 0.161 | 2.5 PM | 13M4G7D | 27 | |
| 1710.7-1779.3 MHz | 0.119 | 2.5 PM | 13M4W7D | 27 | |
| 2537.5-2652.5 MHz | 0.271 | 2.5 PM | 17M9G7D | 27 | |
| 2537.5-2652.5 MHz | 0.236 | 2.5 PM | 17M9W7D | 27 | |
| 2537.5-2652.5 MHz | 0.276 | 2.5 PM | 13M5G7D | 27 | |
| 2537.5-2652.5 MHz | 0.251 | 2.5 PM | 4M50W7D | 27 |
Grants
TCB Grant - Application vFy8r5ypX1M5TUj+1yvGdQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/03/2026 Application Dated: 02/02/2026 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.019 |
| Class II Permissive Change : The changes are : (1) to add new model number, (2) to add new appearance colors, (3) to change storage components, (4) to add new receiver, (5) to remove the mic shielding cover of sub-board, (6) to change appearance of motherboard shielding case.
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot) and simultaneous transmission use conditions are 0.20 W/kg, <0.10 W/kg, <0.10 W/kg and 1.17 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application UbY1BlZ9PaAbbINqMC2+KA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/24/2025 Application Dated: 11/18/2025 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application p3ATEA3cA2an+uwaKYziZw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/24/2025 Application Dated: 11/18/2025 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.019 |
| Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot) and simultaneous transmission use conditions are 0.20 W/kg, <0.10 W/kg, <0.10 W/kg and 1.17 W/kg, respectively.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application olgelAq3VyU+Iipxeby8IQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/24/2025 Application Dated: 11/18/2025 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.061 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.063 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.049 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.06 |
| Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 0 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.15 W/kg, 0.20 W/kg, 0.32 W/kg, 1.34 W/kg and 0.33 W/kg, respectively.
This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application IYS/Zmq3tUh4gA4cdSHBSw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/24/2025 Application Dated: 11/18/2025 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0053 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.22 |
| Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), and simultaneous transmission use conditions are 0.32 W/kg, 0.10 W/kg, 0.20 W/kg and 1.26 W/kg, respectively.
This device has 20/40 MHz bandwidth modes.
|
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application BaF7QC6yfJu2/ExHy1cDcQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/03/2026 Application Dated: 02/02/2026 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.061 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.063 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.049 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.06 |
| Class II Permissive Change : The changes are : (1) to add new model number, (2) to add new appearance colors, (3) to change storage components, (4) to add new receiver, (5) to remove the mic shielding cover of sub-board, (6) to change appearance of motherboard shielding case.
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 0 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.15 W/kg, 0.20 W/kg, 0.32 W/kg, 1.34 W/kg and 0.33 W/kg, respectively.
This device supports 20 MHz, 40 MHz and 80 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application 4n4ZrK0UnL5ep4skYzaiPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/03/2026 Application Dated: 02/02/2026 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0053 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.22 |
| Class II Permissive Change : The changes are : (1) to add new model number, (2) to add new appearance colors, (3) to change storage components, (4) to add new receiver, (5) to remove the mic shielding cover of sub-board, (6) to change appearance of motherboard shielding case.
Output power listed is conducted. SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 15 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), and simultaneous transmission use conditions are 0.32 W/kg, 0.10 W/kg, 0.20 W/kg and 1.26 W/kg, respectively.
This device has 20/40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 3tTcotHhEyy+xY5WI7enjw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/03/2026 Application Dated: 02/02/2026 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.409 | 2.5 PM | 245KGXW | |
| 22H | 824.2 - 848.8 | 0.169 | 2.5 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.593 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.415 | 2.5 PM | 247KG7W | |
| 24E | 1852.4 - 1907.6 | 0.138 | 2.5 PM | 4M11F9W | |
| 27 | 1712.4 - 1752.6 | 0.123 | 2.5 PM | 4M11F9W | |
| 22H | 826.4 - 846.6 | 0.048 | 2.5 PM | 4M11F9W | |
| 24E | 1850.7 - 1909.3 | 0.164 | 2.5 PM | 17M9G7D | |
| 24E | 1850.7 - 1909.3 | 0.116 | 2.5 PM | 18M0W7D | |
| 24E | 1850.7 - 1909.3 | 0.173 | 2.5 PM | 13M4G7D | |
| 24E | 1850.7 - 1909.3 | 0.123 | 2.5 PM | 13M4W7D | |
| 27 | 1710.7 - 1754.3 | 0.142 | 2.5 PM | 17M9G7D | |
| 27 | 1710.7 - 1754.3 | 0.1 | 2.5 PM | 17M9W7D | |
| 27 | 1710.7 - 1754.3 | 0.156 | 2.5 PM | 13M4G7D | |
| 27 | 1710.7 - 1754.3 | 0.109 | 2.5 PM | 13M4W7D | |
| 22H | 824.7 - 848.3 | 0.053 | 2.5 PM | 8M97G7D | |
| 22H | 824.7 - 848.3 | 0.051 | 2.5 PM | 8M97W7D | |
| 22H | 824.7 - 848.3 | 0.059 | 2.5 PM | 4M48G7D | |
| 27 | 2502.5 - 2567.5 | 0.308 | 2.5 PM | 17M9G7D | |
| 27 | 2502.5 - 2567.5 | 0.222 | 2.5 PM | 17M9W7D | |
| 27 | 2502.5 - 2567.5 | 0.321 | 2.5 PM | 13M4G7D | |
| 27 | 2502.5 - 2567.5 | 0.245 | 2.5 PM | 13M4W7D | |
| 27 | 779.5 - 784.5 | 0.053 | 2.5 PM | 8M97G7D | |
| 27 | 779.5 - 784.5 | 0.038 | 2.5 PM | 8M96W7D | |
| 27 | 779.5 - 784.5 | 0.055 | 2.5 PM | 4M48G7D | |
| 27 | 779.5 - 784.5 | 0.042 | 2.5 PM | 4M49W7D | |
| 22H | 826.5 - 827.5 | 0.054 | 2.5 PM | 4M48G7D | |
| 22H | 826.5 - 827.5 | 0.04 | 2.5 PM | 4M49W7D | |
| 90 | 817.5 - 821.5 | 0.055 | 2.5 PM | 4M48G7D | |
| 90 | 817.5 - 821.5 | 0.04 | 2.5 PM | 4M48W7D | |
| 22H | 832.5 - 837.5 | 0.059 | 2.5 PM | 13M4G7D | |
| 22H | 832.5 - 837.5 | 0.04 | 2.5 PM | 13M4W7D | |
| 22H | 832.5 - 837.5 | 0.065 | 2.5 PM | 4M49G7D | |
| 22H | 832.5 - 837.5 | 0.041 | 2.5 PM | 8M96W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 13M4G7D | |
| 22H | 824.7 - 848.3 | 0.043 | 2.5 PM | 13M4W7D | |
| 90 | 814.7 - 823.3 | 0.053 | 2.5 PM | 8M96G7D | |
| 90 | 814.7 - 823.3 | 0.038 | 2.5 PM | 8M96W7D | |
| 90 | 814.7 - 823.3 | 0.054 | 2.5 PM | 2M69G7D | |
| 90 | 814.7 - 823.3 | 0.043 | 2.5 PM | 2M69W7D | |
| 27 | 2572.5 - 2617.5 | 0.311 | 2.5 PM | 17M9G7D | |
| 27 | 2572.5 - 2617.5 | 0.2 | 2.5 PM | 17M9W7D | |
| 27 | 2572.5 - 2617.5 | 0.32 | 2.5 PM | 8M97G7D | |
| 27 | 2572.5 - 2617.5 | 0.206 | 2.5 PM | 13M4W7D | |
| 27 | 2532.5 - 2652.5 | 0.271 | 2.5 PM | 17M9G7D | |
| 27 | 2532.5 - 2652.5 | 0.236 | 2.5 PM | 17M9W7D | |
| 27 | 2532.5 - 2652.5 | 0.276 | 2.5 PM | 13M5G7D | |
| 27 | 2532.5 - 2652.5 | 0.251 | 2.5 PM | 4M50W7D | |
| 27 | 1710.7 - 1779.3 | 0.157 | 2.5 PM | 17M9G7D | |
| 27 | 1710.7 - 1779.3 | 0.109 | 2.5 PM | 17M9W7D | |
| 27 | 1710.7 - 1779.3 | 0.161 | 2.5 PM | 13M4G7D | |
| 27 | 1710.7 - 1779.3 | 0.119 | 2.5 PM | 13M4W7D |
| Class II Permissive Change : The changes are : (1) to add new model number, (2) to add new appearance colors, (3) to change storage components, (4) to add new receiver, (5) to remove the mic shielding cover of sub-board, (6) to change appearance of motherboard shielding case.
Power Output is ERP for part 22, 90 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.06 W/kg, 0.58 W/kg, 1.11 W/kg, 1.34 W/kg and 2.19 W/kg, respectively.
The device supports GSM Band 2/5, WCDMA Band 2/4/5, and FDD LTE Band 2/4/5/7/13/18/19/26/66, TDD LTE Band 38/41.
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, Band 26(Part 90)
Channel Bandwidth (5/10/15/20 MHz) for LTE B7, B38, B41,
Channel Bandwidth (5/10 MHz) for LTE B13,
Channel Bandwidth (5 MHz) for LTE B18,
Channel Bandwidth (5/10/15 MHz) for LTE B19,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26(Part 22).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations. |
TCB Grant - Application +UJyjdchf3CHzZikvpjSfA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/03/2026 Application Dated: 02/02/2026 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| Class II Permissive Change : The changes are : (1) to add new model number, (2) to add new appearance colors, (3) to change storage components, (4) to add new receiver, (5) to remove the mic shielding cover of sub-board, (6) to change appearance of motherboard shielding case. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application +95XCXKDoa7YyQf5oax1aA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 11/24/2025 Application Dated: 11/18/2025 |
| Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| NO.18 Haibin Road, Wusha Village, Chang'an Town |
| Dongguan City, Guangdong, 523860 China |
| Attention: Xiong Bo , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | R9C-OP25249 |
| Name of Grantee: | Guangdong OPPO Mobile Telecommunications Corp., Ltd. |
| Equipment Class: | PCS Licensed Transmitter held to ear |
| Notes: | Mobile Phone |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 824.2 - 848.8 | 0.409 | 2.5 PM | 245KGXW | |
| 22H | 824.2 - 848.8 | 0.169 | 2.5 PM | 247KG7W | |
| 24E | 1850.2 - 1909.8 | 0.593 | 2.5 PM | 246KGXW | |
| 24E | 1850.2 - 1909.8 | 0.415 | 2.5 PM | 247KG7W | |
| 24E | 1852.4 - 1907.6 | 0.138 | 2.5 PM | 4M11F9W | |
| 27 | 1712.4 - 1752.6 | 0.123 | 2.5 PM | 4M11F9W | |
| 22H | 826.4 - 846.6 | 0.048 | 2.5 PM | 4M11F9W | |
| 24E | 1850.7 - 1909.3 | 0.164 | 2.5 PM | 17M9G7D | |
| 24E | 1850.7 - 1909.3 | 0.116 | 2.5 PM | 18M0W7D | |
| 24E | 1850.7 - 1909.3 | 0.173 | 2.5 PM | 13M4G7D | |
| 24E | 1850.7 - 1909.3 | 0.123 | 2.5 PM | 13M4W7D | |
| 27 | 1710.7 - 1754.3 | 0.142 | 2.5 PM | 17M9G7D | |
| 27 | 1710.7 - 1754.3 | 0.1 | 2.5 PM | 17M9W7D | |
| 27 | 1710.7 - 1754.3 | 0.156 | 2.5 PM | 13M4G7D | |
| 27 | 1710.7 - 1754.3 | 0.109 | 2.5 PM | 13M4W7D | |
| 22H | 824.7 - 848.3 | 0.053 | 2.5 PM | 8M97G7D | |
| 22H | 824.7 - 848.3 | 0.051 | 2.5 PM | 8M97W7D | |
| 22H | 824.7 - 848.3 | 0.059 | 2.5 PM | 4M48G7D | |
| 27 | 2502.5 - 2567.5 | 0.308 | 2.5 PM | 17M9G7D | |
| 27 | 2502.5 - 2567.5 | 0.222 | 2.5 PM | 17M9W7D | |
| 27 | 2502.5 - 2567.5 | 0.321 | 2.5 PM | 13M4G7D | |
| 27 | 2502.5 - 2567.5 | 0.245 | 2.5 PM | 13M4W7D | |
| 27 | 779.5 - 784.5 | 0.053 | 2.5 PM | 8M97G7D | |
| 27 | 779.5 - 784.5 | 0.038 | 2.5 PM | 8M96W7D | |
| 27 | 779.5 - 784.5 | 0.055 | 2.5 PM | 4M48G7D | |
| 27 | 779.5 - 784.5 | 0.042 | 2.5 PM | 4M49W7D | |
| 22H | 826.5 - 827.5 | 0.054 | 2.5 PM | 4M48G7D | |
| 22H | 826.5 - 827.5 | 0.04 | 2.5 PM | 4M49W7D | |
| 90 | 817.5 - 821.5 | 0.055 | 2.5 PM | 4M48G7D | |
| 90 | 817.5 - 821.5 | 0.04 | 2.5 PM | 4M48W7D | |
| 22H | 832.5 - 837.5 | 0.059 | 2.5 PM | 13M4G7D | |
| 22H | 832.5 - 837.5 | 0.04 | 2.5 PM | 13M4W7D | |
| 22H | 832.5 - 837.5 | 0.065 | 2.5 PM | 4M49G7D | |
| 22H | 832.5 - 837.5 | 0.041 | 2.5 PM | 8M96W7D | |
| 22H | 824.7 - 848.3 | 0.058 | 2.5 PM | 13M4G7D | |
| 22H | 824.7 - 848.3 | 0.043 | 2.5 PM | 13M4W7D | |
| 90 | 814.7 - 823.3 | 0.053 | 2.5 PM | 8M96G7D | |
| 90 | 814.7 - 823.3 | 0.038 | 2.5 PM | 8M96W7D | |
| 90 | 814.7 - 823.3 | 0.054 | 2.5 PM | 2M69G7D | |
| 90 | 814.7 - 823.3 | 0.043 | 2.5 PM | 2M69W7D | |
| 27 | 2572.5 - 2617.5 | 0.311 | 2.5 PM | 17M9G7D | |
| 27 | 2572.5 - 2617.5 | 0.2 | 2.5 PM | 17M9W7D | |
| 27 | 2572.5 - 2617.5 | 0.32 | 2.5 PM | 8M97G7D | |
| 27 | 2572.5 - 2617.5 | 0.206 | 2.5 PM | 13M4W7D | |
| 27 | 2537.5 - 2652.5 | 0.271 | 2.5 PM | 17M9G7D | |
| 27 | 2537.5 - 2652.5 | 0.236 | 2.5 PM | 17M9W7D | |
| 27 | 2537.5 - 2652.5 | 0.276 | 2.5 PM | 13M5G7D | |
| 27 | 2537.5 - 2652.5 | 0.251 | 2.5 PM | 4M50W7D | |
| 27 | 1710.7 - 1779.3 | 0.157 | 2.5 PM | 17M9G7D | |
| 27 | 1710.7 - 1779.3 | 0.109 | 2.5 PM | 17M9W7D | |
| 27 | 1710.7 - 1779.3 | 0.161 | 2.5 PM | 13M4G7D | |
| 27 | 1710.7 - 1779.3 | 0.119 | 2.5 PM | 13M4W7D |
| Power Output is ERP for part 22, 90 and 27(Below 1GHz) and EIRP for Part 24 and 27(Above 1GHz). SAR compliance for body-worn operating conditions is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.
The highest reported SAR values for head, body-worn accessory, product specific (hotspot), simultaneous transmission and extremity use conditions are 1.06 W/kg, 0.58 W/kg, 1.11 W/kg, 1.34 W/kg and 2.19 W/kg, respectively.
The device supports GSM Band 2/5, WCDMA Band 2/4/5, and FDD LTE Band 2/4/5/7/13/18/19/26/66, TDD LTE Band 38/41.
Channel Bandwidth (1.4/3/5/10/15/20 MHz) for LTE B2, B4, B66,
Channel Bandwidth (1.4/3/5/10 MHz) for LTE B5, Band 26(Part 90)
Channel Bandwidth (5/10/15/20 MHz) for LTE B7, B38, B41,
Channel Bandwidth (5/10 MHz) for LTE B13,
Channel Bandwidth (5 MHz) for LTE B18,
Channel Bandwidth (5/10/15 MHz) for LTE B19,
Channel Bandwidth (1.4/3/5/10/15 MHz) for LTE B26(Part 22).
This device contains functions that are not operational in U.S. Territories. This filing is only applicable for U.S. operations.
|