FCC ID RI7SE150A4NA
SE150A4-NA
by Telit Communications S.p.A.
Grantee Code: RI7 Product Code: SE150A4NA
Latest application date: 2021-10-15
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Original Equipment | 2021-10-15 |
| 663-698 MHz | Original Equipment | 2021-10-15 |
| 2402-2480 MHz | Original Equipment | 2021-10-14 |
| 2402-2480 MHz | Original Equipment | 2021-10-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2021-10-15 | PDF 4.6 MB |
| user manual | Users Manual | 2021-10-15 | PDF 4.6 MB |
| Internal Photos | Internal Photos | 2021-10-15 | PDF 630.8 KB |
| internal photo | Internal Photos | 2021-10-15 | PDF 630.8 KB |
| External Photos | External Photos | 2021-10-15 | PDF 1.2 MB |
| external photo | External Photos | 2021-10-15 | PDF 1.2 MB |
| LABEL | ID Label/Location Info | 2021-10-15 | PDF 210.1 KB |
| Label | ID Label/Location Info | 2021-10-15 | PDF 210.1 KB |
| label | ID Label/Location Info | 2021-10-14 | PDF 210.1 KB |
| Test Setup | Test Setup Photos | 2021-10-15 | PDF 418.7 KB |
| Test Setup | Test Setup Photos | 2021-10-15 | PDF 504.9 KB |
| RF Exposure Metadata only | Test Report | 2021-10-15 | PDF 1.4 MB |
| Test Repor | Test Report | 2021-10-15 | PDF 2.3 MB |
| Test Repor | Test Report | 2021-10-15 | PDF 5.2 MB |
| Test Report | Test Report | 2021-10-15 | PDF 5.8 MB |
| Test Report | Test Report | 2021-10-15 | PDF 5.3 MB |
| Test Report | Test Report | 2021-10-14 | PDF 5.6 MB |
| Test Report | Test Report | 2021-10-14 | PDF 4.2 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2021-10-15 | PDF 38.3 KB |
| Authorization Letter | Cover Letter(s) | 2021-10-15 | PDF 132.5 KB |
| FCC Short & Long Term Confidentiality Request Rev4 | Cover Letter(s) | 2021-10-15 | PDF 89 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2021-10-15 | PDF 89 KB |
| FCC Software Configuration Control Declaration | Cover Letter(s) | 2021-10-15 | PDF 81.2 KB |
| AuthorizationLetterforSTSLab | Cover Letter(s) | 2021-10-14 | PDF 132.5 KB |
| MPE | RF Exposure Info | 2021-10-15 | PDF 1.4 MB |
| RFExposure | RF Exposure Info | 2021-10-15 | PDF 1.4 MB |
| Block Diagram Metadata only | Block Diagram | PDF 139.8 KB | |
| SCH Metadata only | Schematics | PDF 1,016 KB | |
| OP Metadata only | Operational Description | PDF 177.7 KB | |
| FCC Software Security Requirements for UNII devices Rev 2 Metadata only | SDR Software/Security Inf | PDF 239.5 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 155.7 KB |
Application Information
| Application ID | Yq4n6kUgTN3t1Q6PqKfBPg== |
|---|---|
| Final Action Date | 2021-10-15 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0020384608 |
| Model | SE150A4NA |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | SE150A4-NA |
| Responsible Party | Brian Tucker, SVP Quality Assurance, Brian.Tucker@telit.com  , 1-919-449-78607 |
| Technical Contact | Telit Communications S.p.A., Brian.Tucker@telit.com |
| Test Firm | Bovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com  , +86 755-36886288 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. This device contains 20 and 40MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| Yq4n6kUgTN3t1Q6PqKfBPg== | 2021-10-15 | Original Equipment |
| Cq8X9SvGGd+VGj1zggev6w== | 2021-10-15 | Original Equipment |
| 64OcC8Oj7TVoTy+Z9j0+2g== | 2021-10-14 | Original Equipment |
| 6+48bsUHVU4SkaBoeA/XGw== | 2021-10-14 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 663-698 MHz | 0.1528 | 0.051ppm | 17M9G7D | 27 | |
| 663-698 MHz | 0.1472 | 0.051ppm | 17M9W7D | 27 | |
| 699.7-715.3 MHz | 0.1614 | 0.045ppm | 8M94G7D | 27 | |
| 699.7-715.3 MHz | 0.1521 | 0.045ppm | 8M93W7D | 27 | |
| 706.5-713.5 MHz | 0.1928 | 0.051ppm | 8M91G7D | 27 | |
| 706.5-713.5 MHz | 0.1879 | 0.051ppm | 8M92W7D | 27 | |
| 779.5-784.5 MHz | 0.1507 | 0.045ppm | 8M90G7D | 27 | |
| 779.5-784.5 MHz | 0.1393 | 0.045ppm | 8M91W7D | 27 | |
| 788-798 MHz | 0.1607 | 0.051ppm | 8M91G7D | 27 | |
| 788-798 MHz | 0.1459 | 0.051ppm | 8M90W7D | 27 | |
| 814.7-823.3 MHz | 0.1496 | 0.021ppm | 8M91G7D | 22H | |
| 814.7-823.3 MHz | 0.1361 | 0.021ppm | 8M89W7D | 22H | |
| 824.7-848.3 MHz | 0.1556 | 0.02ppm | 13M5G7D | 22H | |
| 824.7-848.3 MHz | 0.1524 | 0.02ppm | 13M5W7D | 22H | |
| 824.7-848.3 MHz | 0.171 | 0.048ppm | 8M95G7D | 22H | |
| 824.7-848.3 MHz | 0.1679 | 0.048ppm | 8M94W7D | 22H | |
| 1710-1780 MHz | 0.1726 | 0.021ppm | 17M9G7D | 27 | |
| 1710-1780 MHz | 0.1581 | 0.021ppm | 17M9W7D | 27 | |
| 1710.7-1754.3 MHz | 0.1556 | 0.021ppm | 17M9G7D | 27 | |
| 1710.7-1754.3 MHz | 0.1469 | 0.021ppm | 17M9W7D | 27 | |
| 1850.7-1914.3 MHz | 0.1622 | 0.019ppm | 17M9G7D | 24E | |
| 1850.7-1914.3 MHz | 0.1545 | 0.019ppm | 17M9W7D | 24E | |
| 1850.7-1909.3 MHz | 0.1816 | 0.018ppm | 17M9G7D | 24E | |
| 1850.7-1909.3 MHz | 0.1706 | 0.018ppm | 17M9W7D | 24E | |
| 2402-2480 MHz | 0.0013 | 15C | CC | ||
| 2402-2480 MHz | 0.0044000 | 15C | CC | ||
| 2412-2462 MHz | 0.1081 | 15C | CC | ||
| 2502.5-2567.5 MHz | 0.15 | 0.014ppm | 17M9G7D | 27 | |
| 2502.5-2567.5 MHz | 0.1377 | 0.014ppm | 17M9W7D | 27 | |
| 2557.5-2652.5 MHz | 0.1563 | 0.014ppm | 17M9G7D | 27 | |
| 2557.5-2652.5 MHz | 0.1476 | 0.014ppm | 17M9W7D | 27 | |
| 5180-5240 MHz | 0.0082 | 15E | 38, CC | ||
| 5260-5320 MHz | 0.0085 | 15E | 38, CC, ND | ||
| 5500-5700 MHz | 0.0118 | 15E | 38, CC, ND | ||
| 5745-5825 MHz | 0.0105 | 15E | 38, CC |
Grants
TCB Grant - Application Yq4n6kUgTN3t1Q6PqKfBPg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0082 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0085 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0118 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0105 |
| Single Modular Approval. This device contains 20 and 40MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application Yq4n6kUgTN3t1Q6PqKfBPg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 10/15/2021 Application Dated: 10/14/2021 |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0082 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0085 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0118 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0105 |
| Single Modular Approval. This device contains 20 and 40MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/15/2021 Application Dated: 10/15/2021 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.4 - 1907.6 | 0.2472 | 0.019 PM | 4M13F9W | |
| 22H | 826.4 - 846.6 | 0.2432 | 0.043 PM | 4M12F9W | |
| 27 | 1712.4 - 1752.6 | 0.2547 | 0.019 PM | 4M13F9W | |
| 24E | 1850.7 - 1909.3 | 0.1816 | 0.018 PM | 17M9G7D | |
| 24E | 1850.7 - 1909.3 | 0.1706 | 0.018 PM | 17M9W7D | |
| 27 | 1710.7 - 1754.3 | 0.1556 | 0.021 PM | 17M9G7D | |
| 27 | 1710.7 - 1754.3 | 0.1469 | 0.021 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.171 | 0.048 PM | 8M95G7D | |
| 22H | 824.7 - 848.3 | 0.1679 | 0.048 PM | 8M94W7D | |
| 27 | 2502.5 - 2567.5 | 0.15 | 0.014 PM | 17M9G7D | |
| 27 | 2502.5 - 2567.5 | 0.1377 | 0.014 PM | 17M9W7D | |
| 27 | 699.7 - 715.3 | 0.1614 | 0.045 PM | 8M94G7D | |
| 27 | 699.7 - 715.3 | 0.1521 | 0.045 PM | 8M93W7D | |
| 27 | 779.5 - 784.5 | 0.1507 | 0.045 PM | 8M90G7D | |
| 27 | 779.5 - 784.5 | 0.1393 | 0.045 PM | 8M91W7D | |
| 27 | 788.0 - 798.0 | 0.1607 | 0.051 PM | 8M91G7D | |
| 27 | 788.0 - 798.0 | 0.1459 | 0.051 PM | 8M90W7D | |
| 27 | 706.5 - 713.5 | 0.1928 | 0.051 PM | 8M91G7D | |
| 27 | 706.5 - 713.5 | 0.1879 | 0.051 PM | 8M92W7D | |
| 24E | 1850.7 - 1914.3 | 0.1622 | 0.019 PM | 17M9G7D | |
| 24E | 1850.7 - 1914.3 | 0.1545 | 0.019 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.1556 | 0.02 PM | 13M5G7D | |
| 22H | 824.7 - 848.3 | 0.1524 | 0.02 PM | 13M5W7D | |
| 22H | 814.7 - 823.3 | 0.1496 | 0.021 PM | 8M91G7D | |
| 22H | 814.7 - 823.3 | 0.1361 | 0.021 PM | 8M89W7D | |
| 27 | 2557.5 - 2652.5 | 0.1563 | 0.014 PM | 17M9G7D | |
| 27 | 2557.5 - 2652.5 | 0.1476 | 0.014 PM | 17M9W7D | |
| 27 | 1710.0 - 1780.0 | 0.1726 | 0.021 PM | 17M9G7D | |
| 27 | 1710.0 - 1780.0 | 0.1581 | 0.021 PM | 17M9W7D | |
| 27 | 663.0 - 698.0 | 0.1528 | 0.051 PM | 17M9G7D | |
| 27 | 663.0 - 698.0 | 0.1472 | 0.051 PM | 17M9W7D |
| Single Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
EAS Grant - Application Cq8X9SvGGd+VGj1zggev6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 10/15/2021 Application Dated: 10/15/2021 |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 24E | 1852.4 - 1907.6 | 0.2472 | 0.019 PM | 4M13F9W | |
| 22H | 826.4 - 846.6 | 0.2432 | 0.043 PM | 4M12F9W | |
| 27 | 1712.4 - 1752.6 | 0.2547 | 0.019 PM | 4M13F9W | |
| 24E | 1850.7 - 1909.3 | 0.1816 | 0.018 PM | 17M9G7D | |
| 24E | 1850.7 - 1909.3 | 0.1706 | 0.018 PM | 17M9W7D | |
| 27 | 1710.7 - 1754.3 | 0.1556 | 0.021 PM | 17M9G7D | |
| 27 | 1710.7 - 1754.3 | 0.1469 | 0.021 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.171 | 0.048 PM | 8M95G7D | |
| 22H | 824.7 - 848.3 | 0.1679 | 0.048 PM | 8M94W7D | |
| 27 | 2502.5 - 2567.5 | 0.15 | 0.014 PM | 17M9G7D | |
| 27 | 2502.5 - 2567.5 | 0.1377 | 0.014 PM | 17M9W7D | |
| 27 | 699.7 - 715.3 | 0.1614 | 0.045 PM | 8M94G7D | |
| 27 | 699.7 - 715.3 | 0.1521 | 0.045 PM | 8M93W7D | |
| 27 | 779.5 - 784.5 | 0.1507 | 0.045 PM | 8M90G7D | |
| 27 | 779.5 - 784.5 | 0.1393 | 0.045 PM | 8M91W7D | |
| 27 | 788.0 - 798.0 | 0.1607 | 0.051 PM | 8M91G7D | |
| 27 | 788.0 - 798.0 | 0.1459 | 0.051 PM | 8M90W7D | |
| 27 | 706.5 - 713.5 | 0.1928 | 0.051 PM | 8M91G7D | |
| 27 | 706.5 - 713.5 | 0.1879 | 0.051 PM | 8M92W7D | |
| 24E | 1850.7 - 1914.3 | 0.1622 | 0.019 PM | 17M9G7D | |
| 24E | 1850.7 - 1914.3 | 0.1545 | 0.019 PM | 17M9W7D | |
| 22H | 824.7 - 848.3 | 0.1556 | 0.02 PM | 13M5G7D | |
| 22H | 824.7 - 848.3 | 0.1524 | 0.02 PM | 13M5W7D | |
| 22H | 814.7 - 823.3 | 0.1496 | 0.021 PM | 8M91G7D | |
| 22H | 814.7 - 823.3 | 0.1361 | 0.021 PM | 8M89W7D | |
| 27 | 2557.5 - 2652.5 | 0.1563 | 0.014 PM | 17M9G7D | |
| 27 | 2557.5 - 2652.5 | 0.1476 | 0.014 PM | 17M9W7D | |
| 27 | 1710.0 - 1780.0 | 0.1726 | 0.021 PM | 17M9G7D | |
| 27 | 1710.0 - 1780.0 | 0.1581 | 0.021 PM | 17M9W7D | |
| 27 | 663.0 - 698.0 | 0.1528 | 0.051 PM | 17M9G7D | |
| 27 | 663.0 - 698.0 | 0.1472 | 0.051 PM | 17M9W7D |
| Single Modular Approval. Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. This device also contains functions that are not operational in U.S. Territories. This filing is only applicable for US operations. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/14/2021 Application Dated: 10/14/2021 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0044 |
| Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 64OcC8Oj7TVoTy+Z9j0+2g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 10/14/2021 Application Dated: 10/14/2021 |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0044 |
| Single Modular Approval. Output power listed is conducted power.The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 10/14/2021 Application Dated: 10/14/2021 |
| Telit Communications S.p.A. |
| Viale Stazione di Prosecco 5/b |
| Trieste, 34010 Italy |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0013 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1081 |
| Single Modular Approval. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6+48bsUHVU4SkaBoeA/XGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Telit Communications S.p.A. Viale Stazione di Prosecco 5/b Trieste, 34010 Italy |
Date of Grant: 10/14/2021 Application Dated: 10/14/2021 |
| Attention: Brian Tucker , SVP Quality Assurance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RI7SE150A4NA |
| Name of Grantee: | Telit Communications S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | SE150A4-NA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0013 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.1081 |
| Single Modular Approval. This device contains 20 and 40 MHz signal bandwidth. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |