FCC ID RWO-RZ090510
Intel BE202
by Razer Inc.
Grantee Code: RWO Product Code: RZ090510
Latest application date: 2026-05-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-14 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-26 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-26 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-26 |
| 2422-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2025-02-26 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-08 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-04-08 |
| 5855 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-25 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-22 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 5955-6415 MHz | Class II permissive change or modification of presently authorized equipment | 2024-01-11 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 | 2023-11-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 | 2023-11-20 |
| 5955-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 09/14/2023 | 2023-11-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 | 2023-11-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2025-08-19 | PDF 1.3 MB |
| Users Manual | Users Manual | 2024-09-10 | PDF 517.2 KB |
| User Manual | Users Manual | 2024-07-04 | PDF 495.8 KB |
| Internal Photos-1 | Internal Photos | 2025-08-19 | PDF 5.2 MB |
| Internal Photos-2 | Internal Photos | 2025-08-19 | PDF 3.2 MB |
| Internal Photos-1 | Internal Photos | 2024-09-10 | PDF 5.5 MB |
| Internal Photos-2 | Internal Photos | 2024-09-10 | PDF 3.8 MB |
| Internal Photos-1 | Internal Photos | 2024-07-04 | PDF 5.2 MB |
| Internal Photos-2 | Internal Photos | 2024-07-04 | PDF 4.9 MB |
| Internal Photos-3 | Internal Photos | 2024-07-04 | PDF 5.2 MB |
| Internal Photos-4 | Internal Photos | 2024-07-04 | PDF 2.3 MB |
| External Photos | External Photos | 2025-08-19 | PDF 3 MB |
| External Photos | External Photos | 2024-09-10 | PDF 3.4 MB |
| External Photos | External Photos | 2024-07-04 | PDF 3.2 MB |
| External photos | External Photos | 2024-07-04 | PDF 3.2 MB |
| ID Label/Location Info | ID Label/Location Info | 2026-05-14 | PDF 127.6 KB |
| ID Label/Location Info | ID Label/Location Info | 2025-02-26 | PDF 1.1 MB |
| Label and label location RZ09-0509_280Watt | ID Label/Location Info | 2024-04-08 | PDF 399.7 KB |
| Label and label location RZ09-0509_330Watt | ID Label/Location Info | 2024-04-08 | PDF 403.6 KB |
| Block Diagram | Block Diagram | 2026-05-14 | PDF 114.6 KB |
| Schematics | Schematics | 2026-05-14 | PDF 920 KB |
| Test Setup Photos_RF | Test Setup Photos | 2025-08-19 | PDF 1.1 MB |
| Test Setup Photos_SAR | Test Setup Photos | 2025-08-19 | PDF 356.2 KB |
| Test Setup Photos | Test Setup Photos | 2024-09-10 | PDF 881.9 KB |
| Test Setup Photos_SAR | Test Setup Photos | 2024-09-10 | PDF 280.5 KB |
| EUT TEST PHOTO | Test Setup Photos | 2024-07-04 | PDF 1.2 MB |
| FCC SAR Test report BTL-FCC SAR-1-2309C132_Appendix D. Photographs of the Tes | Test Setup Photos | 2024-07-04 | PDF 338.1 KB |
| FCC SAR Test report BTL-FCC SAR-1-2309C132_Appendix D. Photographs of the Test S | Test Setup Photos | 2024-07-04 | PDF 338.1 KB |
| Antenna Spec | Test Report | 2026-05-14 | PDF 1.9 MB |
| DTS Test Report_BT LE | Test Report | 2026-05-14 | PDF 832.1 KB |
| DTS Test Report_WLAN 2.4G | Test Report | 2026-05-14 | PDF 835.9 KB |
| Test Report_6CD Metadata only | Test Report | 2026-05-14 | PDF 968.5 KB |
| Test Report_6CD | Test Report | 2026-05-14 | PDF 863.8 KB |
| Test Report_DSS | Test Report | 2026-05-14 | PDF 968.5 KB |
| Test Report_RLAN 5G | Test Report | 2026-05-14 | PDF 842 KB |
| Test Report_SAR | RF Exposure Info | 2026-05-14 | PDF 1.4 MB |
| Test Report_SAR_Appendix A | RF Exposure Info | 2026-05-14 | PDF 346.9 KB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2026-05-14 | PDF 1.9 MB |
| Test Report_SAR_Appendix C-1 | RF Exposure Info | 2026-05-14 | PDF 5.5 MB |
| Test Report_SAR_Appendix C-2 | RF Exposure Info | 2026-05-14 | PDF 3.2 MB |
| Test Report_WLAN 5.9G | Test Report | 2026-05-14 | PDF 874.5 KB |
| Test Report_6CD | Test Report | 2025-02-26 | PDF 948.5 KB |
| Test Report_DSS | Test Report | 2025-02-26 | PDF 937.7 KB |
| Test Report_DTS-BT LE | Test Report | 2025-02-26 | PDF 933.9 KB |
| Test Report_DTS-WLAN 2.4G | Test Report | 2025-02-26 | PDF 940.6 KB |
| Test Report_RLAN 5G | Test Report | 2025-02-26 | PDF 1.4 MB |
| Test Report_SAR | RF Exposure Info | 2025-02-26 | PDF 2 MB |
| Test Report_SAR_Appendix A | RF Exposure Info | 2025-02-26 | PDF 579.6 KB |
| Test Report_SAR_Appendix B | RF Exposure Info | 2025-02-26 | PDF 1 MB |
| Test Report_SAR_Appendix C-1 | RF Exposure Info | 2025-02-26 | PDF 5.3 MB |
| Test Report_SAR_Appendix C-2 | RF Exposure Info | 2025-02-26 | PDF 5.4 MB |
| Test Report_SAR_Appendix C-3 | RF Exposure Info | 2025-02-26 | PDF 2.8 MB |
| Test Report_WLAN 5.9G | Test Report | 2025-02-26 | PDF 1,009.6 KB |
| Antenna Spec | Test Report | 2024-04-08 | PDF 714.9 KB |
| Test Report | Test Report | 2024-04-08 | PDF 613.4 KB |
| Test Report | Test Report | 2024-04-08 | PDF 592.2 KB |
| Test Report_BLE | Test Report | 2024-04-08 | PDF 587.5 KB |
| Test Report_SAR | RF Exposure Info | 2024-04-08 | PDF 1.6 MB |
| Test Report_SAR_Appendix A. SAR Plots of System Verification | RF Exposure Info | 2024-04-08 | PDF 471.4 KB |
| Test Report_SAR_Appendix B. SAR Plots of SAR Measurement | RF Exposure Info | 2024-04-08 | PDF 728.7 KB |
| Test Report_SAR_Appendix C. Calibration Certificate | RF Exposure Info | 2024-04-08 | PDF 4.7 MB |
| Test Report_WIFI 2.4G | Test Report | 2024-04-08 | PDF 572.9 KB |
| Test Report_WIFI 5.9G | Test Report | 2024-04-08 | PDF 702.4 KB |
| Test Report_WIFI 5G | Test Report | 2024-04-08 | PDF 713.7 KB |
| Covered equipment | Attestation Statements | 2026-05-14 | PDF 480.6 KB |
| US agent | Attestation Statements | 2026-05-14 | PDF 197 KB |
| Covered equipment | Attestation Statements | 2025-02-26 | PDF 205.5 KB |
| US Agent | Attestation Statements | 2025-02-26 | PDF 51.4 KB |
| Attestation Statements | Attestation Statements | 2024-04-08 | PDF 255.7 KB |
| US Agent Letter | Attestation Statements | 2024-04-08 | PDF 313.3 KB |
| Authorization Letter | Cover Letter(s) | 2026-05-14 | PDF 507.6 KB |
| Class II permissive change format letter | Cover Letter(s) | 2026-05-14 | PDF 343.4 KB |
| Declaration of Product | Cover Letter(s) | 2026-05-14 | PDF 349 KB |
| Declaration of Product | Cover Letter(s) | 2026-05-14 | PDF 348 KB |
| Model Declaration Letter | Cover Letter(s) | 2026-05-14 | PDF 348 KB |
| Power Inconsistency Declaration Letter | Cover Letter(s) | 2026-05-14 | PDF 414.4 KB |
| Request for non-disclosure | Cover Letter(s) | 2026-05-14 | PDF 102.8 KB |
| Authorization Letter | Cover Letter(s) | 2025-02-26 | PDF 289.9 KB |
| Class II permissive change format letter | Cover Letter(s) | 2025-02-26 | PDF 381.7 KB |
| Declaration of Product | Cover Letter(s) | 2025-02-26 | PDF 290.6 KB |
| FCC Power Inconsistency Declaration Letter | Cover Letter(s) | 2025-02-26 | PDF 363.4 KB |
| Model Declaration Letter Metadata only | Cover Letter(s) | 2025-02-26 | PDF 209.3 KB |
| Model Declaration Letter_rev | Cover Letter(s) | 2025-02-26 | PDF 208.6 KB |
| Request for non-disclosure | Cover Letter(s) | 2025-02-26 | PDF 151.1 KB |
| Statement Declaration Letter | Cover Letter(s) | 2025-02-26 | PDF 285.4 KB |
| Authorization Letter | Cover Letter(s) | 2024-04-08 | PDF 362.7 KB |
| Class II permissive change format letter | Cover Letter(s) | 2024-04-08 | PDF 370 KB |
| Confidentiality | Cover Letter(s) | 2024-04-08 | PDF 114 KB |
| Declaration of Product 6CD | Cover Letter(s) | 2024-04-08 | PDF 350.2 KB |
| FCC Power Inconsistency Declaration Letter | Cover Letter(s) | 2024-04-08 | PDF 360.3 KB |
| Users Manual Metadata only | Users Manual | 2026-10-19 | PDF 519.4 KB |
| Internal Photos-1 Metadata only | Internal Photos | 2026-10-19 | PDF 5.4 MB |
| Internal Photos-2 Metadata only | Internal Photos | 2026-10-19 | PDF 859.3 KB |
| External Photos Metadata only | External Photos | 2026-10-19 | PDF 3.2 MB |
| Test Setup Photos_6CD Metadata only | Test Setup Photos | 2026-10-19 | PDF 1.3 MB |
| Test Setup Photos_NII Metadata only | Test Setup Photos | 2026-10-19 | PDF 1.3 MB |
| Test Setup Photos_SAR Metadata only | Test Setup Photos | 2026-10-19 | PDF 287.2 KB |
Application Information
| Application ID | yJRWk/WsHPBTXtOf3K78SQ== |
|---|---|
| Final Action Date | 2026-05-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0022386734 |
| Model | RZ090510 |
| Frequency Range | 6665 MHz |
| Equipment Class | 6CD - 15E 6 GHz Low Power Dual Client |
| Device Description | Intel BE202 |
| Responsible Party | Johnsen Tia, johnsen.tia@razer.com  , 760 579 0180 |
| Technical Contact | Steven Lu, BTL Inc., steven@newbtl.com  , 86-769-83183000 |
| Non-Technical Contact | Johnsen Tia, Razer Inc., Johnsen.tia@razer.com , 760 579 0180 |
| Test Firm | Sophia Huang, BTL Inc. (Dongguan), sophia.huang@newbtl.com , 86-769-83183000 |
| TCB Email | dl_radio-certification@kiwa.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| yJRWk/WsHPBTXtOf3K78SQ== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| v/HumRnglMMRJIaHChbT8Q== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| 6hCQH6jerlEJBIsjaxUPfQ== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| /toiu9Jla+kG8qMVzmYY9A== | 2026-05-14 | Class II permissive change or modification of presently authorized equipment |
| RyTkAXinNdDuZ5b8eFEQcQ== | 2025-02-26 | Class II permissive change or modification of presently authorized equipment |
| OwxiX26C4pXDbHZqoXW3Aw== | 2025-02-26 | Class II permissive change or modification of presently authorized equipment |
| 9Y+1hdrdj5JuFRgG7rXo7g== | 2025-02-26 | Class II permissive change or modification of presently authorized equipment |
| +KkWg7KaP7g5bJGoSgF0FQ== | 2025-02-26 | Class II permissive change or modification of presently authorized equipment |
| xYPj7D9usdQn09TMUwm5QA== | 2024-04-08 | Class II permissive change or modification of presently authorized equipment |
| SyvF9tUYu0BYzQB8uQuugA== | 2024-04-08 | Class II permissive change or modification of presently authorized equipment |
| PDKYDEztVhbxgsBwom/J1Q== | 2024-04-08 | Class II permissive change or modification of presently authorized equipment |
| /47JdFRyPlisUkkh+Gt/Sg== | 2024-04-08 | Class II permissive change or modification of presently authorized equipment |
| vYP2Ed7fOoT4wFaTobbe7w== | 2024-01-25 | Class II permissive change or modification of presently authorized equipment |
| YkLksr+gEgAecMrxd+futA== | 2024-01-22 | Class II permissive change or modification of presently authorized equipment |
| jUXuX81Tmj9nUrxUNMc+Fw== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| evTlNYvPIw2Yhzj5lkIp1A== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| BI0TfIaqeLk0l5ZYUH9EoQ== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| 8bfhdp42M3WhEkQx6hTXWg== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| 0mNSPt6DHKgzDPr6QWcIjQ== | 2024-01-11 | Class II permissive change or modification of presently authorized equipment |
| jfKWT9yXzq0eaP+culXfsA== | 2023-11-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 |
| gmJeDiGsbKuLyGYDKjwXTw== | 2023-11-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 |
| PUO1eeLjrQGHXW2CDodqUQ== | 2023-11-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 09/14/2023 |
| K2p4vIDklmqB7A+CUNi4xA== | 2023-11-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 |
| 6au6FOYGPnpaj8ps0ZP/BA== | 2023-11-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 15B | CC | ||
| 2402-2480 MHz | 0.0280000 | 15C | CC |
| 2402-2480 MHz | 0.0320000 | 15C | CC |
| 2402-2480 MHz | 0.0320000 | CC | |
| 2402-2480 MHz | 0.028 | 15C | CC |
| 2402-2480 MHz | 0.028 | CC | |
| 2412-2472 MHz | 0.998 | 15C | CC |
| 2412-2472 MHz | 0.998 | 15C | CC, MO |
| 2412-2472 MHz | 0.998 | CC | |
| 2412-2462 MHz | 0.997 | 15C | CC, MO |
| 2422-2462 MHz | 0.997 | 15C | CC, MO |
| 2422-2462 MHz | 0.997 | CC, MO | |
| 5190-5230 MHz | 0.224 | 15E | CC, MO |
| 5210 MHz | 0.138 | 15E | CC, MO |
| 5210 MHz | 0.138 | CC, MO | |
| 5250 MHz | 0.097 | 15E | CC, MO, ND |
| 5250 MHz | 0.097 | CC, MO, ND | |
| 5260-5320 MHz | 0.148 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.148 | CC, MO, ND | |
| 5270-5310 MHz | 0.227 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.227 | CC, MO, ND | |
| 5290 MHz | 0.142 | 15E | CC, MO, ND |
| 5290 MHz | 0.142 | CC, MO, ND | |
| 5500-5700 MHz | 0.15 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.15 | CC, MO, ND | |
| 5510-5670 MHz | 0.227 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.227 | CC, MO, ND | |
| 5530-5610 MHz | 0.223 | 15E | CC, MO, ND |
Grants
TCB Grant - Application YkLksr+gEgAecMrxd+futA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 01/22/2024 Application Dated: 01/12/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). Class II Permissive Change: Adds U-NII Band 4 via software update. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application YkLksr+gEgAecMrxd+futA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/22/2024 Application Dated: 01/12/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). Class II Permissive Change: Adds U-NII Band 4 via software update. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/14/2026 Application Dated: 04/22/2026 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0582) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 1.27 W/kg and 1.45 W/kg respectively. 2. Two groups of antennas are used for the subject approved module in the Notebook Computer. Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application xYPj7D9usdQn09TMUwm5QA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.34 W/kg and 0.62 W/kg respectively.
2. Reducing RF output power.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xYPj7D9usdQn09TMUwm5QA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.34 W/kg and 0.62 W/kg respectively.
2. Reducing RF output power.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/25/2024 Application Dated: 01/23/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5845.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : The change is to add Band 4 via firmware modification as described in the filing. The module is incorporated into a Notebook Computer (Brand : RAZER , Model: RZ09-0510). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.96 W/kg and 1.59 W/kg respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application vYP2Ed7fOoT4wFaTobbe7w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/25/2024 Application Dated: 01/23/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5845.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : The change is to add Band 4 via firmware modification as described in the filing. The module is incorporated into a Notebook Computer (Brand : RAZER , Model: RZ09-0510). The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.96 W/kg and 1.59 W/kg respectively.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/14/2026 Application Dated: 04/22/2026 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.028 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0582) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.59 W/kg and 0.57 W/kg respectively. 2. Two groups of antennas are used for the subject approved module in the Notebook Computer.
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application SyvF9tUYu0BYzQB8uQuugA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 1.07 W/kg and 1.57 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application SyvF9tUYu0BYzQB8uQuugA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 1.07 W/kg and 1.57 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/26/2025 Application Dated: 02/26/2025 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0529) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.22 W/kg and 1.11 W/kg respectively. 2. Reducing RF output power. All versions of the Model BE200NGW and BE200NGW M are electrically equal except the following difference: 1. BE200NGW M model has disabled 320MHz channels through software. 2. Except for the two differences mentioned above, everything else is the same.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application PUO1eeLjrQGHXW2CDodqUQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PUO1eeLjrQGHXW2CDodqUQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.22 W/kg and 1.20 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application PDKYDEztVhbxgsBwom/J1Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 04/08/2024 Application Dated: 03/13/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0509) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.22 W/kg and 1.20 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/26/2025 Application Dated: 02/26/2025 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0529) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 1.35 W/kg and 1.57 W/kg respectively. 2. Reducing RF output power. All versions of the Model BE200NGW and BE200NGW M are electrically equal except the following difference: 1. BE200NGW M model has disabled 320MHz channels through software. 2. Except for the two differences mentioned above, everything else is the same.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application K2p4vIDklmqB7A+CUNi4xA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application K2p4vIDklmqB7A+CUNi4xA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR value for Body exposure condition is <0.1 W/kg.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application jUXuX81Tmj9nUrxUNMc+Fw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR value for Body exposure condition is <0.1 W/kg.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application jfKWT9yXzq0eaP+culXfsA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 |
| Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gmJeDiGsbKuLyGYDKjwXTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.91 W/kg and 1.59 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application evTlNYvPIw2Yhzj5lkIp1A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.91 W/kg and 1.59 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.73 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to 5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15 dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to 4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.997 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.028 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.50 W/kg and 0.88 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application BI0TfIaqeLk0l5ZYUH9EoQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.997 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.028 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm.
The highest reported SAR values for Body and Simultaneous transmission exposure conditions are 0.50 W/kg and 0.88 W/kg respectively.
2. Reducing RF output power.
Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/26/2025 Application Dated: 02/26/2025 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0529) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.65 W/kg and 1.10 W/kg respectively. 2. Reducing RF output power. All versions of the Model BE200NGW and BE200NGW M are electrically equal except the following difference: 1. BE200NGW M model has disabled 320MHz channels through software. 2. Except for the two differences mentioned above, everything else is the same.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 8bfhdp42M3WhEkQx6hTXWg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.96 W/kg and 1.53 W/kg respectively.
2. Reducing RF output power.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8bfhdp42M3WhEkQx6hTXWg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 01/11/2024 Application Dated: 01/05/2024 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook Computer (Brand : RAZER , Model: RZ09-0510) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.96 W/kg and 1.53 W/kg respectively.
2. Reducing RF output power.
Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to 5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02 dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to 4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 05/14/2026 Application Dated: 04/22/2026 |
| Razer Inc. |
| 9 Pasteur |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Associate VP, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel BE202 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Class II Permissive Change : 1. The change is to incorporate this Module into a Notebook PC (Brand : RAZER , Model: RZ09-0582) as described in the filing. The SAR data in this filing is applicable to demonstrate compliance for body operating conditions and is limited to the specific configuration tested for this filling. SAR has been evaluated at 0 mm. The highest reported SAR values for Body and Simultaneous transmission are 0.18 W/kg and 1.55 W/kg respectively. 2. Two groups of antennas are used for the subject approved module in the Notebook Computer.
Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.36 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 6au6FOYGPnpaj8ps0ZP/BA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Razer Inc. |
| 9 Pasteur, Suite 100 |
| Irvine, CA 92618 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 6au6FOYGPnpaj8ps0ZP/BA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Razer Inc. 9 Pasteur, Suite 100 Irvine, CA 92618 United States |
Date of Grant: 11/20/2023 Application Dated: 11/07/2023 |
| Attention: Johnsen Tia , Director, Regulatory & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | RWO-RZ090510 |
| Name of Grantee: | Razer Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel WiFi 6E BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |