FCC ID SRQ-BLADEA72020

LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone

by ZTE Corporation

Grantee Code: SRQ   Product Code: BLADEA72020
Latest application date: 2020-02-19

FCC ID Device Details

FCC IDSRQ-BLADEA72020
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeSRQ
Product CodeBLADEA72020
Applicant BusinessZTE Corporation 🇨🇳
Related Domains zte.com.cn
Equipment ClassLTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Test FirmCCIC Southern Testing Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-02-19
2402-2480 MHzOriginal Equipment2020-02-19
814-824 MHzOriginal Equipment2020-02-19

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2020-02-19PDF 512.4 KB
INT_PHOTOInternal Photos2020-02-19PDF 880.8 KB
Internal_PhotosInternal Photos2020-02-19PDF 880.8 KB
Internal_photosInternal Photos2020-02-19PDF 880.8 KB
Internal_photosiInternal Photos2020-02-19PDF 880.8 KB
EXT_PHOTOExternal Photos2020-02-19PDF 474.2 KB
External_PhotosExternal Photos2020-02-19PDF 474.2 KB
External_photosExternal Photos2020-02-19PDF 474.2 KB
Label_and_Label_LocationID Label/Location Info2020-02-19PDF 134.2 KB
Test_Setup_PhotosTest Setup Photos2020-02-19PDF 191.2 KB
Test_Setup_PhotosTest Setup Photos2020-02-19PDF 226.4 KB
Test_Setup_PhotosTest Setup Photos2020-02-19PDF 167.2 KB
Test_Setup_photosTest Setup Photos2020-02-19PDF 534.1 KB
SET2020-00403 Fcc Part 15 B EMC ReportTest Report2020-02-19PDF 393.4 KB
SET2020-00479 LTE Report_Band 24572666Test Report2020-02-19PDF 5.4 MB
SET2020-00480 GSM WCDMA ReportTest Report2020-02-19PDF 4.8 MB
SET2020-00481 FCC-BLETest Report2020-02-19PDF 1.3 MB
SET2020-00482 FCC-BTTest Report2020-02-19PDF 4.5 MB
SET2020-00483 FCC-2.4G WIFI ReportTest Report2020-02-19PDF 2.8 MB
FCC_Long_Term_Confidentiality_Request_Rev4.1Cover Letter(s)2020-02-19PDF 41.3 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2020-02-19PDF 41.3 KB
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s)2020-02-19PDF 41.3 KB
Letter_of_AuthorizationCover Letter(s)2020-02-19PDF 17.4 KB
Appendix A SAR System performance Check PlotsRF Exposure Info2020-02-19PDF 929.8 KB
Appendix B SAR Measurement results PlotsRF Exposure Info2020-02-19PDF 2.4 MB
Appendix C Calibration reportsRF Exposure Info2020-02-19PDF 4.3 MB
SET2020-00629 SET FCC SAR ReportRF Exposure Info2020-02-19PDF 767.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 208.2 KB
block_diagram Metadata onlyBlock DiagramPDF 208.2 KB
SCH Metadata onlySchematicsPDF 5.3 MB
Schematic Metadata onlySchematicsPDF 5.3 MB
schematics Metadata onlySchematicsPDF 5.3 MB
Operation_Description Metadata onlyOperational DescriptionPDF 549 KB
operation_description Metadata onlyOperational DescriptionPDF 549 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 73.4 KB
Tune up Info Metadata onlyParts List/Tune Up InfoPDF 229.8 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 229.8 KB

Application Information

Application IDt/S0GCtdhtMpIL+mvoluaQ==
Final Action Date2020-02-19
Application PurposeOriginal Equipment
Applicant FRN0022602015
ModelBLADEA72020
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionLTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Responsible PartyYu Gong, Certification Manager, gongyu@zte.com.cn , +86-21-68895397
Technical ContactZTE Corporation, gongyu@zte.com.cn
Test FirmZhu Qi, CCIC Southern Testing Co., Ltd, zhuqi@ccic-set.com , 867552626067
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.249W/kg, 0.160W/kg, 0.160W/kg and 1.303W/kg respectively.

Applications

Application IDDatePurpose
t/S0GCtdhtMpIL+mvoluaQ==2020-02-19Original Equipment
ZCyPzbKUlCxJxaRWfGpVdw==2020-02-19Original Equipment
PhyXjoLba0xWwMUUTazE/w==2020-02-19Original Equipment
JYPgxhY7CTCv6FJ22OVHlA==2020-02-19Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
814-824 MHz0.1640.02ppm8M93G7D22H
814-824 MHz0.1320.02ppm8M93W7D22H
824-849 MHz0.1640.02ppm13M5G7D22H
824-849 MHz0.1290.02ppm13M5W7D22H
824.2-848.8 MHz1.710.0043ppm246KGXW22H
824.2-848.8 MHz0.3660.0075ppm246KG7W22H
826.4-846.6 MHz0.1790.006ppm4M17F9W22H
826.5-846.5 MHz0.1930.017ppm4M49G7D22H
826.5-846.5 MHz0.1360.017ppm2M67W7D22H
829-844 MHz0.1390.017ppm8M93G7D22H
829-844 MHz0.0950.017ppm8M93G7D22H
1717.5-1772.5 MHz0.1710.013ppm13M5G7D27
1717.5-1772.5 MHz0.1730.013ppm13M5W7D27
1720-1745 MHz0.1320.013ppm17M9G7D27
1720-1745 MHz0.1210.013ppm17M9W7D27
1720-1770 MHz0.1510.013ppm17M9G7D27
1720-1770 MHz0.1280.013ppm17M9W7D27
1850.2-1909.8 MHz0.9640.0074ppm248KGXW24E
1850.2-1909.8 MHz0.3850.0078ppm249KG7W24E
1851.5-1908.5 MHz0.1510.012ppm2M67W7D24E
1852.4-1907.6 MHz0.2110.0069ppm4M17F9W24E
1857.5-1902.5 MHz0.1450.012ppm13M5G7D24E
1860-1900 MHz0.1080.012ppm17M9G7D24E
1860-1900 MHz0.1410.012ppm18M0W7D24E
2402-2480 MHz0.00615CCC
2402-2480 MHz0.008500015CCC
2412-2462 MHz0.04515CCC
2507.5-2562.5 MHz0.130.012ppm13M5G7D27
2510-2560 MHz0.1210.012ppm17M9G7D27
2510-2560 MHz0.1540.012ppm17M9W7D27

Grants

TCB Grant - Application ZCyPzbKUlCxJxaRWfGpVdw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2020

Application Dated: 02/19/2020
ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.031W/kg, 0.107W/kg and 1.250W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ZCyPzbKUlCxJxaRWfGpVdw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
  Date of Grant: 02/19/2020

Application Dated: 02/19/2020
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0085  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.031W/kg, 0.107W/kg and 1.250W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application t/S0GCtdhtMpIL+mvoluaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2020

Application Dated: 02/19/2020
ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.045  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.249W/kg, 0.160W/kg, 0.160W/kg and 1.303W/kg respectively.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application t/S0GCtdhtMpIL+mvoluaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
  Date of Grant: 02/19/2020

Application Dated: 02/19/2020
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Digital Transmission System
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.006  
CC 15C 2412.0  -  2462.0 0.045  

Output power listed is conducted power. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.249W/kg, 0.160W/kg, 0.160W/kg and 1.303W/kg respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application PhyXjoLba0xWwMUUTazE/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2020

Application Dated: 02/19/2020
ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application PhyXjoLba0xWwMUUTazE/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
  Date of Grant: 02/19/2020

Application Dated: 02/19/2020
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application JYPgxhY7CTCv6FJ22OVHlA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/19/2020

Application Dated: 02/19/2020
ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.7  -  1754.3 0.157 0.013  PM 1M08G7D
27 1710.7  -  1754.3 0.126 0.013  PM 1M09W7D
27 1712.4  -  1752.6 0.183 0.0055  PM 4M17F9W
27 1717.5  -  1772.5 0.171 0.013  PM 13M5G7D
27 1717.5  -  1772.5 0.173 0.013  PM 13M5W7D
27 1720.0  -  1745.0 0.132 0.013  PM 17M9G7D
27 1720.0  -  1745.0 0.121 0.013  PM 17M9W7D
27 1720.0  -  1770.0 0.151 0.013  PM 17M9G7D
27 1720.0  -  1770.0 0.128 0.013  PM 17M9W7D
24E 1850.2  -  1909.8 0.964 0.0074  PM 248KGXW
24E 1850.2  -  1909.8 0.385 0.0078  PM 249KG7W
24E 1851.5  -  1908.5 0.151 0.012  PM 2M67W7D
24E 1852.4  -  1907.6 0.211 0.0069  PM 4M17F9W
24E 1857.5  -  1902.5 0.145 0.012  PM 13M5G7D
24E 1860.0  -  1900.0 0.108 0.012  PM 17M9G7D
24E 1860.0  -  1900.0 0.141 0.012  PM 18M0W7D
27 2507.5  -  2562.5 0.13 0.012  PM 13M5G7D
27 2510.0  -  2560.0 0.121 0.012  PM 17M9G7D
27 2510.0  -  2560.0 0.154 0.012  PM 17M9W7D
22H 814.0  -  824.0 0.164 0.02  PM 8M93G7D
22H 814.0  -  824.0 0.132 0.02  PM 8M93W7D
22H 824.0  -  849.0 0.164 0.02  PM 13M5G7D
22H 824.0  -  849.0 0.129 0.02  PM 13M5W7D
22H 824.2  -  848.8 1.71 0.0043  PM 246KGXW
22H 824.2  -  848.8 0.366 0.0075  PM 246KG7W
22H 826.4  -  846.6 0.179 0.006  PM 4M17F9W
22H 826.5  -  846.5 0.193 0.017  PM 4M49G7D
22H 826.5  -  846.5 0.136 0.017  PM 2M67W7D
22H 829.0  -  844.0 0.139 0.017  PM 8M93G7D
22H 829.0  -  844.0 0.095 0.017  PM 8M93G7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.269W/kg, 1.143W/kg, 1.143W/kg and 1.303W/kg respectively.

EAS Grant - Application JYPgxhY7CTCv6FJ22OVHlA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZTE Corporation
ZTE Plaza, Keji Road South
Shenzhen,
China
  Date of Grant: 02/19/2020

Application Dated: 02/19/2020
 
Attention: Yu Gong , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  SRQ-BLADEA72020
Name of Grantee:  ZTE Corporation
Equipment Class: PCS Licensed Transmitter held to ear
Notes: LTE/WCDMA/GSM(GPRS) Multi-Mode Digital Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
27 1710.7  -  1754.3 0.157 0.013  PM 1M08G7D
27 1710.7  -  1754.3 0.126 0.013  PM 1M09W7D
27 1712.4  -  1752.6 0.183 0.0055  PM 4M17F9W
27 1717.5  -  1772.5 0.171 0.013  PM 13M5G7D
27 1717.5  -  1772.5 0.173 0.013  PM 13M5W7D
27 1720.0  -  1745.0 0.132 0.013  PM 17M9G7D
27 1720.0  -  1745.0 0.121 0.013  PM 17M9W7D
27 1720.0  -  1770.0 0.151 0.013  PM 17M9G7D
27 1720.0  -  1770.0 0.128 0.013  PM 17M9W7D
24E 1850.2  -  1909.8 0.964 0.0074  PM 248KGXW
24E 1850.2  -  1909.8 0.385 0.0078  PM 249KG7W
24E 1851.5  -  1908.5 0.151 0.012  PM 2M67W7D
24E 1852.4  -  1907.6 0.211 0.0069  PM 4M17F9W
24E 1857.5  -  1902.5 0.145 0.012  PM 13M5G7D
24E 1860.0  -  1900.0 0.108 0.012  PM 17M9G7D
24E 1860.0  -  1900.0 0.141 0.012  PM 18M0W7D
27 2507.5  -  2562.5 0.13 0.012  PM 13M5G7D
27 2510.0  -  2560.0 0.121 0.012  PM 17M9G7D
27 2510.0  -  2560.0 0.154 0.012  PM 17M9W7D
22H 814.0  -  824.0 0.164 0.02  PM 8M93G7D
22H 814.0  -  824.0 0.132 0.02  PM 8M93W7D
22H 824.0  -  849.0 0.164 0.02  PM 13M5G7D
22H 824.0  -  849.0 0.129 0.02  PM 13M5W7D
22H 824.2  -  848.8 1.71 0.0043  PM 246KGXW
22H 824.2  -  848.8 0.366 0.0075  PM 246KG7W
22H 826.4  -  846.6 0.179 0.006  PM 4M17F9W
22H 826.5  -  846.5 0.193 0.017  PM 4M49G7D
22H 826.5  -  846.5 0.136 0.017  PM 2M67W7D
22H 829.0  -  844.0 0.139 0.017  PM 8M93G7D
22H 829.0  -  844.0 0.095 0.017  PM 8M93G7D

Power output listed is ERP for frequencies below 1GHz and EIRP for frequencies above 1GHz. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the body of the user. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, hotspot, and simultaneous transmission use conditions is 0.269W/kg, 1.143W/kg, 1.143W/kg and 1.303W/kg respectively.



Mail To: