FCC ID UZI-35K888

Ruggedized 4G LTE M2M & Vehicle Mount Router

by BandRich Inc.

Grantee Code: UZI   Product Code: 35K888
Latest application date: 2015-12-02

FCC ID Device Details

FCC IDUZI-35K888
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeUZI
Product Code35K888
Applicant BusinessBandRich Inc. 🇹🇼
Related Domains bandrich.com
Equipment ClassRuggedized 4G LTE M2M & Vehicle Mount Router
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-12-02
699.7-715.3 MHzOriginal Equipment2015-12-02

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-05-30PDF 3.3 MB
Internal PhotosInternal Photos2016-05-30PDF 5.8 MB
External PhotosExternal Photos2016-05-30PDF 877.6 KB
LabelID Label/Location Info2015-12-02PDF 41.7 KB
Label LocationID Label/Location Info2015-12-02PDF 86 KB
Label SampleID Label/Location Info2015-12-02PDF 41.7 KB
Test Setup Photos DSSTest Setup Photos2016-05-30PDF 280.2 KB
Test Setup Photos LTE B14Test Setup Photos2016-05-30PDF 174.3 KB
Test Setup Photos PCB LTETest Setup Photos2016-05-30PDF 312.5 KB
Test Setup Photos PCB WCDMATest Setup Photos2016-05-30PDF 76.2 KB
Test Report DTSTest Report2015-12-02PDF 3.6 MB
Test Report PCB LTETest Report2015-12-02PDF 1.1 MB
Test Report PCB LTE Appendix A-B12Test Report2015-12-02PDF 2.8 MB
Test Report PCB LTE Appendix A-B17Test Report2015-12-02PDF 4.1 MB
Test Report PCB LTE Appendix A-B2Test Report2015-12-02PDF 4.1 MB
Test Report PCB LTE Appendix A-B25Test Report2015-12-02PDF 4.2 MB
Test Report PCB LTE Appendix A-B4Test Report2015-12-02PDF 4.1 MB
Test Report PCB LTE B14Test Report2015-12-02PDF 531.2 KB
Test Report PCB LTE B14 Appendix ATest Report2015-12-02PDF 5.1 MB
Test Report PCB WCDMATest Report2015-12-02PDF 341.9 KB
Test Report PCB WCDMA Appendix ATest Report2015-12-02PDF 827.3 KB
Test Report PCB WCDMA Appendix BTest Report2015-12-02PDF 57.9 KB
Authorization LetterCover Letter(s)2015-12-02PDF 17.7 KB
Confidentiality Request LetterCover Letter(s)2015-12-02PDF 340.8 KB
DOC LetterCover Letter(s)2015-12-02PDF 189.4 KB
Declaration of Data Re-UseCover Letter(s)2015-12-02PDF 209.7 KB
POACover Letter(s)2015-12-02PDF 319.8 KB
RF ExposureRF Exposure Info2015-12-02PDF 416.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 180.8 KB
Schematics Metadata onlySchematicsPDF 1.7 MB
Operational Description Metadata onlyOperational DescriptionPDF 317.7 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 110.2 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 146 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 21.8 KB

Application Information

Application IDM7k55rfHnIEpcDp5ruAEFg==
Final Action Date2015-12-02
Application PurposeOriginal Equipment
Applicant FRN0026032615
Model35K888
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRuggedized 4G LTE M2M & Vehicle Mount Router
Responsible PartyWilliam Liang, william_liang@bandrich.com , +886227998851
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/30/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The antennas used must not exceed a gain of 4.5 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode.

Applications

Application IDDatePurpose
M7k55rfHnIEpcDp5ruAEFg==2015-12-02Original Equipment
2hfYiNSxPuA383itEQgUqw==2015-12-02Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699.7-715.3 MHz0.13490.0185ppm1M10G7D27
700.5-714.5 MHz0.10840.0185ppm2M74W7D27
704-711 MHz0.13180.0185ppm9M09G7D27
704-711 MHz0.10540.0185ppm9M01W7D27
709-711 MHz0.13650.0156ppm9M05G7D27
709-711 MHz0.10810.0156ppm9M07W7D27
793 MHz0.13650.0117ppm9M05G7D9
793 MHz0.10810.0117ppm8M97W7D9
1710.7-1754.3 MHz0.28180.0118ppm1M10G7D27
1710.7-1754.3 MHz0.22390.0118ppm1M10W7D27
1712.4-1752.6 MHz0.30550.004ppm4M16F9W27
1720-1745 MHz0.21680.0118ppm18M4W7D27
1720-1745 MHz0.27540.0118ppm18M5G7D27
1857.5-1902.5 MHz0.28180.0107ppm13M5G7D24E
1860-1900 MHz0.27860.0107ppm18M3G7D24E
1860-1900 MHz0.22390.0107ppm18M5W7D24E
1860-1905 MHz0.28180.0165ppm18M2G7D24E
1860-1905 MHz0.22390.0165ppm18M4W7D24E
2412-2462 MHz0.592900015CMO

Grants

TCB Grant - Application M7k55rfHnIEpcDp5ruAEFg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/02/2015

Application Dated: 12/01/2015
BandRich Inc.
6F-2, No. 71, Zhouzi St, Neihu Dist.
Taipei, 11493
Taiwan
 
Attention: William Liang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZI-35K888
Name of Grantee:  BandRich Inc.
Equipment Class: Digital Transmission System
Notes: Ruggedized 4G LTE M2M & Vehicle Mount Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.5929  

Power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The antennas used must not exceed a gain of 4.5 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode.

MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application M7k55rfHnIEpcDp5ruAEFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

BandRich Inc.
6F-2, No. 71, Zhouzi St, Neihu Dist.
Taipei, 11493
Taiwan
  Date of Grant: 12/02/2015

Application Dated: 12/01/2015
 
Attention: William Liang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZI-35K888
Name of Grantee:  BandRich Inc.
Equipment Class: Digital Transmission System
Notes: Ruggedized 4G LTE M2M & Vehicle Mount Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.5929  

Power listed is conducted. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. The antennas used must not exceed a gain of 4.5 dBi. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 and 40 MHz bandwidth mode.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2hfYiNSxPuA383itEQgUqw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/02/2015

Application Dated: 12/01/2015
BandRich Inc.
6F-2, No. 71, Zhouzi St, Neihu Dist.
Taipei, 11493
Taiwan
 
Attention: William Liang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZI-35K888
Name of Grantee:  BandRich Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Ruggedized 4G LTE M2M & Vehicle Mount Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1462 0.0167  PM 4M17F9W
24E 1852.4  -  1907.6 0.2858 0.0027  PM 4M17F9W
27 1712.4  -  1752.6 0.3055 0.004  PM 4M16F9W
24E 1860.0  -  1900.0 0.2786 0.0107  PM 18M3G7D
24E 1860.0  -  1900.0 0.2239 0.0107  PM 18M5W7D
24E 1857.5  -  1902.5 0.2818 0.0107  PM 13M5G7D
24E 1860.0  -  1905.0 0.2818 0.0165  PM 18M2G7D
24E 1860.0  -  1905.0 0.2239 0.0165  PM 18M4W7D
27 1720.0  -  1745.0 0.2754 0.0118  PM 18M5G7D
27 1720.0  -  1745.0 0.2168 0.0118  PM 18M4W7D
27 1710.7  -  1754.3 0.2818 0.0118  PM 1M10G7D
27 1710.7  -  1754.3 0.2239 0.0118  PM 1M10W7D
27 704.0  -  711.0 0.1318 0.0185  PM 9M09G7D
27 704.0  -  711.0 0.1054 0.0185  PM 9M01W7D
27 699.7  -  715.3 0.1349 0.0185  PM 1M10G7D
27 700.5  -  714.5 0.1084 0.0185  PM 2M74W7D
27 709.0  -  711.0 0.1365 0.0156  PM 9M05G7D
27 709.0  -  711.0 0.1081 0.0156  PM 9M07W7D
90 793.0  -  793.0 0.1365 0.0117  PM 9M05G7D
90 793.0  -  793.0 0.1081 0.0117  PM 8M97W7D

Power listed is EIRP for parts 24E and 27 above 1 GHz, and ERP for parts 22H, 90, and 27 below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, and 25; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 12; and 5 and 10 MHz bandwidth modes for FDD LTE Bands 14 and 17. The antennas used must not exceed a gain of 1.0 dBi in the Cellular band or LTE Bands 14 and 17; 2.0 dBi in the PCS band, AWS band, or LTE Bands 2, 4, or 25. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 2hfYiNSxPuA383itEQgUqw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

BandRich Inc.
6F-2, No. 71, Zhouzi St, Neihu Dist.
Taipei, 11493
Taiwan
  Date of Grant: 12/02/2015

Application Dated: 12/01/2015
 
Attention: William Liang

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  UZI-35K888
Name of Grantee:  BandRich Inc.
Equipment Class: PCS Licensed Transmitter
Notes: Ruggedized 4G LTE M2M & Vehicle Mount Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1462 0.0167  PM 4M17F9W
24E 1852.4  -  1907.6 0.2858 0.0027  PM 4M17F9W
27 1712.4  -  1752.6 0.3055 0.004  PM 4M16F9W
24E 1860.0  -  1900.0 0.2786 0.0107  PM 18M3G7D
24E 1860.0  -  1900.0 0.2239 0.0107  PM 18M5W7D
24E 1857.5  -  1902.5 0.2818 0.0107  PM 13M5G7D
24E 1860.0  -  1905.0 0.2818 0.0165  PM 18M2G7D
24E 1860.0  -  1905.0 0.2239 0.0165  PM 18M4W7D
27 1720.0  -  1745.0 0.2754 0.0118  PM 18M5G7D
27 1720.0  -  1745.0 0.2168 0.0118  PM 18M4W7D
27 1710.7  -  1754.3 0.2818 0.0118  PM 1M10G7D
27 1710.7  -  1754.3 0.2239 0.0118  PM 1M10W7D
27 704.0  -  711.0 0.1318 0.0185  PM 9M09G7D
27 704.0  -  711.0 0.1054 0.0185  PM 9M01W7D
27 699.7  -  715.3 0.1349 0.0185  PM 1M10G7D
27 700.5  -  714.5 0.1084 0.0185  PM 2M74W7D
27 709.0  -  711.0 0.1365 0.0156  PM 9M05G7D
27 709.0  -  711.0 0.1081 0.0156  PM 9M07W7D
90 793.0  -  793.0 0.1365 0.0117  PM 9M05G7D
90 793.0  -  793.0 0.1081 0.0117  PM 8M97W7D

Power listed is EIRP for parts 24E and 27 above 1 GHz, and ERP for parts 22H, 90, and 27 below 1 GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons, and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures, or as evaluated in this filing. This device supports LTE of 1.4, 3, 5, 10, 15, and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, and 25; LTE of 1.4, 3, 5, and 10 MHz bandwidth modes for FDD LTE Band 12; and 5 and 10 MHz bandwidth modes for FDD LTE Bands 14 and 17. The antennas used must not exceed a gain of 1.0 dBi in the Cellular band or LTE Bands 14 and 17; 2.0 dBi in the PCS band, AWS band, or LTE Bands 2, 4, or 25. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: